This Solicitation opportunity from Department Of Defense was posted on June 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INSULATION SLEEVING

Closed

SPE7M2-26-U-0243Federal

Submission Closed06/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335999

New

DIBBS

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-28QB

This contract is for the procurement of electrical insulation tape under solicitation SPE4A6-26-T-28QB for the Department of Defense ASC Commodities Division. The requirement consists of four rolls of material identified by NSN 5970-00-944-5015, with approved part numbers from Saint-Gobain Performance Plastics Corp, Rogers Corporation, and Hawkeye International. This is designated as a critical application commercial item with a non-extendable shelf life of 18 months. Delivery is required within 20 days after receipt of order, with FOB destination for both inspection and acceptance. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and requires sampling in accordance with MIL-STD-1916 or ASQ H1331. All shipments must comply with RP001 packaging requirements and include specific shelf-life marking.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-27CU

Solicitation SPE4A6-26-T-27CU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-00-480-1329. The requirement consists of multiple line items with quantities ranging from 1 to 20 rolls, with required delivery dates scheduled between August 28 and September 8, 2026. Delivery is required within five days of the award, with FOB, inspection, and acceptance all set at the destination. Shipments are directed to various locations, including the USS Shoup DDG 86, the DLA LMP Zone 1 depot in Texas, the Lockheed Martin Distribution Center in Georgia, ASD Oceana in Virginia, and the Base Naval de Rota in Spain. The contractor must adhere to strict quality and packaging standards, including sealing each tape in a waterproof polyfilm bag and packing 10 to 12 rolls per intermediate container. All marking must comply with MIL-STD-129, specifically using Special Marking Code 32 for Type I shelf-life items, which have a non-extendable shelf life of 18 months. The use of mercury or mercury compounds is strictly prohibited in all preservation, packaging, and marking. Technical and quality requirements are further governed by the DLA Master List and RP001 packaging requirements. Evaluation for award will consider price, with a preference for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing processes are ineligible for award. The procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity standards for safeguarding covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Electrical Contacts (NSN 5999-01-132-8787)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Special Purpose Branched Cable Assemblies

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Battery Box Manufacturer/Supplier

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-01-136-7909)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Caps (NSN 5999-00-033-6574)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Solenoids (NSN 5945-00-369-0865)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sleeve Bushings (NSN 3120011153346)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

UPS Preventative Maintenance Services

Solicitation # 36C24727Q0028

The Department of Veterans Affairs, specifically Network Contract Office 7, is seeking a provider for UPS Preventative Maintenance Services under solicitation number 36C24727Q0028. This is a combined contract opportunity set aside as a sole source for Service-Disabled Veteran-Owned Small Businesses under NAICS code 335999. The services will be performed in Dublin, Georgia, with the primary point of contact being Quentin Deloney. The solicitation was posted on September 11, 2026, and requires a response by September 22, 2026, at 5:00 PM. Interested parties should refer to the attached documentation for the full scope of the solicitation requirements.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

59--INSULATION SLEEVING,EL

Solicitation # SPE4A6-26-U-4183

Solicitation SPE4A6-26-U-4183 is a request for quotations issued by the ASC Commodities Division of the Department of Defense for the procurement of electrical insulation sleeving, identified by NSN 5970010203420. This is a Women-Owned Small Business set-aside under NAICS code 335999. The government intends to award a unilateral Simplified Indefinite-Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum ceiling of 350,000.00 dollars. The estimated annual quantity is 474 units, with a guaranteed minimum of 47 units and an expected average of two orders per year. Delivery is required within 117 days after order, with shipping to various CONUS and OCONUS DLA Depots under FOB Origin terms. The material must be procured in one continuous length on a reel or spool and marked according to MIL-STD-129. Packaging must comply with RP001 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Award will be based on the most advantageous offer considering price and other factors, though items produced via additive manufacturing are ineligible. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted electronically via DIBBS by September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 13 days

AI Contract Overview

The contract is an indefinite delivery agreement for insulation sleeving with an estimated quantity of 385,000 units and a ceiling value not to exceed $350,000.00. It was awarded under solicitation number SPE7M226U0243, posted on June 8, 2026, and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The contract is managed by the Defense Logistics Agency Land and Maritime, a branch of the Department of Defense, with the office located in Columbus, Ohio, 43218-3990. The primary point of contact for inquiries is Hunter Steele, reachable via email at Hunter.Steele@dla.mil or by phone at 614-202-6709. The place of performance is unspecified, and no set-aside designation is applied to this award.

General Info

Procurement of 385 feet insulation sleeving, one-year IDC, $350,000 max, multiple DLA depot deliveries.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

Contract Value

$350,000

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Awardee

RIGHT FIND INCView Profile

Award Issued Date

06/08/2026, 12:00:00 AM UTC

Documents

(1)

SPE7M2-26-U-0243.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 18

Combined Synopsis

Type ChangedJun 2

Combined Synopsis → Solicitation

Response DeadlineJun 5

Deadline has passed

Submission Closed

06/05/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressUSA

Contacts

Hunter STEELE

contact@example.gov

+1 (555) 000-0000

Full Description

INSULATION SLEEVING
INSULATION SLEEVING, ELECTRICAL
M23053/5-113-9 (White)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
SPE7M2-26-U-0243
SECTION B
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED
BY THE PERFORMANCE REVIEW INSTITUTE,
161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA
15086-7527. TO VIEW CONTRACTORS CURRENTLY
APPROVED BY (PRI) GO TO http://www.p-r-i.org http://www.p-r-i.org
THE MANUFACTURER FOR THE QPL ITEM MUST BE APPROVED FOR THE QPL ITEM AT THE TIME OF THE CONTRACT AWARD.
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD SAE AS23053/5A
REVISION NR A DTD 11/01/2018
PART PIECE NUMBER: M23053/5-113-9
IAW REFERENCE NON GOVT STD SAE AS23053
REVISION NR C DTD 11/01/2023
PART PIECE NUMBER: M23053/5-113-9
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000233948 0001 FT 385.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5970008269068
DELIVERY (IN DAYS):0105
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:ZZ OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-00-826-9068 Quantity: 385 FT Purchase Request: 1000233948QTY: 385 Delivery: 105 days ADO