Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INSULATOR, PLATE

Active
SPE4A6-26-T-08YCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an INSULATOR, PLATE with NSN 5970016765461 and Raytheon part number 8604388-1, for a quantity of seven units to be delivered FOB origin within 232 days of contract award, with a required delivery date of October 14, 2026 and a need ship date of March 19, 2027. Zero variance is permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E with preservation method 33, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking except for limited functional uses in specific devices such as batteries, fluorescent lights, and sensors, which must be shockproof and contain a secondary containment barrier per NAVSEA 5100-003D. The contractor is subject to CMMC Level 2 cybersecurity self-assessment requirements and must comply with all technical and quality requirements referenced by R or I numbers from the DLA Master List. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at Level VII with an AQL of 0.1. The delivery address is DLA Distribution at the New Cumberland facility in Pennsylvania, and the contract is issued under solicitation SPE4A6-26-T-08YC with a sole point of contact at DLA.

General Info

Procure seven insulator plates, FOB origin, delivery by Oct 14, 2026, comply with MIL-STD, zero mercury, CMMC Level 2, DLA New Cumberland.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-08YC.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ZACHARY LAM
contact@example.gov

Full Description

Show more
INSULATOR,PLATE
INSULATOR,PLATE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RAYTHEON COMPANY 5D744 P/N 8604388-1
SPE4A6-26-T-08YC
SECTION B
PR: 7017527707 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017527707 0001 EA 7.000
NSN/MATERIAL:5970016765461
DELIVERY (IN DAYS):0232
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BV OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-08YC
SECTION B
PR: 7017527707 PRLI: 0001 CONT’D
Need Ship Date:03/19/2027 Original Required Delivery Date:10/14/2026
SPE4A6-26-T-08YC NSN/Part Number: 5970-01-676-5461 Quantity: 7 EA Purchase Request: 7017527707QTY: 7 Delivery: 232 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELE
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
Cable Assembly Manufacturing and Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335932
New
DIBBS
Electrical Insulation Tape Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335932
New
DIBBS
Electrical Insulation Tape Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335932
New
DIBBS
Special-Purpose Electrical Cable Assembly Manufacturing
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving under part number HRHT-1/2 manufactured by TE Connectivity Corporation, identified by NSN 5970-01-728-7903, with a quantity of 42 units. The product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 for marking and labeling, with hazardous materials following FED-STD-313 and IP025, while non-hazardous items must be commercially packaged in compliance with ASTM D3951 unless overridden by DLA standards. Palletization must meet DLA packaging guidelines, and all units must be delivered FOB origin with no variance in quantity allowed. Inspection and acceptance are to occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise directed by the contract. Critical, major, and minor attributes must correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery window is 171 days from the contract date, with an original required delivery date of April 6, 2027, and a need ship date of January 17, 2027. The items must be shipped to DLA Distribution Cherry Point in North Carolina, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A6-26-T-08PX with a unit price of $42.00, totaling $1,764.00, and the primary point of contact is Jessica Fuentes-Ossio of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATOR, PLATEThe contract pertains to the procurement of an insulator, plate/thermal pad with part number 4155300-1 and NSN 5970016232525, for a quantity of 85 units at a unit price of $85.00, resulting in a total price of $7,225.00. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, which supersede all other standards including ASTM D3951. Packaging must comply with DLA-specific guidelines RP001 and MIL-STD-129, with hazardous materials requiring adherence to TQ requirement IP025 per FED-STD-313 and non-hazardous materials packaged commercially per ASTM D3951. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. The item must be delivered FOB origin within 171 days of contract award, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with shipping instructions governed by DLAD procedural notes C19 and C20. The solicitation was issued under contract number SPE4A6-26-T-08FX with a response deadline in July 2026 and a required delivery date of March 14, 2027, with an original ship date of January 17, 2027.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT, METAL, FLEXIBLEThis contract specifies the procurement of 20 units of metal flexible conduit, identified by NSN 5975-01-609-2821 and part number W-1297-19 from WOLF AIRCRAFT PRODUCTS, INC, under solicitation SPE4A7-26-T-585F. The item is classified as a critical application item and is source controlled, requiring manufacture and testing in strict compliance with limited rights data that only approved vendors with traceability to the source may access. All suppliers must adhere to technical and quality requirements outlined in the DLA Master List, including MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances unless otherwise stated, and must comply with ISO 9001:2015 quality standards. Inspection and acceptance occur at origin, with packaging mandated to meet MIL-STD-2073-1E and marking conforming to MIL-STD-129, including specific palletization and unit packaging codes. The contract enforces zero variance in quantity and requires delivery FOB origin within 171 days, with a required delivery date of January 1, 2027, and a need ship date of January 17, 2027. Documentation such as a Certificate of Conformance is permitted unless explicitly withheld, and source approval requests are mandatory for new vendors. All shipments must be addressed to the DLA distribution facility in New Cumberland, Pennsylvania, in accordance with specified transportation and freight guidelines.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELEElectrical insulation tape meeting MIL-I-19166.007 specifications, Type II, 1.0 inch width and 36 yard length, is procured under solicitation SPE4A6-26-T-08RG with a shelf life of twelve months extendable, requiring compliance with DLA packaging standards and MIL-STD-2073-1E for preparation. The material is not classified as hazardous per HMIC review and must be marked in accordance with MIL-STD-129, including the special marking code 33 indicating Type II and shelf life status. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor distinctions. The tape is sourced from qualified products listed under QPL-19166-30 and must conform to the referenced technical documentation revisions. Two units are required, each priced at $2.00 and $3.00 respectively, for delivery within twenty days FOB destination to APO addresses in the Middle East. Packaging includes unit container E5, no cushioning, and packing level B as defined by the DLA. Acceptance and inspection occur at the destination, with no variance allowed in quantity. The contract specifies delivery to Royal Jordanian Air Force and U.S. Forces locations via freight using DLA procedures C19 and C20, with original delivery dates set for July 15 and 16, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
STRAP, TIE DOWN, ELECTRIThe contract specifies the procurement of 17,472 units of strap, tie down, electrical components with NSN 5975-01-589-6311 under solicitation SPE4A7-26-T-585E, issued by the Department of Defense through DLA. Delivery is required FOB origin with zero tolerance for quantity variance, and all items must arrive at the designated destination warehouse in Tracy, CA by February 9, 2027, with a required ship date of January 17, 2027. Strict compliance with DLA packaging requirements is mandatory, including adherence to MIL-STD-129 for labeling, ASTM D3951 for commercial packaging unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging must align with RP001 and palletization standards, and the unit of issue is each (EA). Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise defined, with critical, major, and minor attributes assigned specific verification levels or AQLs. Technical and quality mandates from the DLA Master List of Requirements take precedence over all other standards. Acceptance occurs at the destination, and inspection is conducted upon arrival. The contract authorizes only specific part numbers from Hellermanntyon Corp, Oshkosh Defense LLC, and Electronic Industries, Inc. The contract includes provisions for configuration change management, variance requests, and removal of government identification from non-accepted supplies. Shipments must comply with DLA transportation notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
MOUNTING BASE, ELECTRICThe contract is for a single mounting base for electrical equipment with NSN 5975-01-622-0722, issued under solicitation SPE4A7-26-T-588P by the Defense Logistics Agency. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent packaging standards, export control under ITAR or EAR, and requires compliance with DFARS 252.225-7048. Technical data associated with the item cannot be disclosed to foreign persons without prior government authorization, and only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may access such data. The contractor must also comply with requirements for removing government identification from non-accepted supplies and bare item marking. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the origin, and the supplier must be certified under Cybersecurity Maturity Model Certification Level 2 by a certified third-party assessment organization. The delivery schedule requires fulfillment within 321 days after award, with performance located in Tracy, California. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, under a Federal procurement framework with NAICS code 335932. Primary point of contact is Dedrick Benson of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
Electrical Insulation Tape Supply (NSN 5970-00-949-4846)The contract entails the supply of 25,089 rolls of electrical insulation tape meeting MIL-SPEC A-A-59163 standards, with full compliance required for packaging, labeling, and traceability throughout the supply chain. Each roll must be properly documented and prepared for delivery under FOB Destination terms to Derby, Kansas, ensuring the product arrives in the designated location with all regulatory and quality assurances intact. The item is identified by NSN 5970-00-949-4846 and falls under NAICS code 335932, indicating classification within the electrical equipment and component manufacturing sector. This is a subcontract awarded by the Defense Logistics Agency under the Department of Defense, with the solicitation linked to contract SPE4A626D5697 and delivery order SPE4A626F256N. The posting date of July 20, 2026, signals future execution with no current solicitation number listed, suggesting a pre-planned or direct award scenario. The absence of specific set-aside details or point of contact information implies standardized procurement procedures typical for large-scale DLA logistics contracts, emphasizing reliability and military specification adherence over competitive bidding mechanisms.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Marking, and Shipping ServicesThe contract requires comprehensive packaging, marking, and shipping services for finished resilient mounts in full compliance with MIL-STD-129 standards, ensuring all items are properly labeled, documented, and prepared for government delivery. This is a total small business set-aside under SBA guidelines, exclusively available to small businesses as defined by the SBA, with the NAICS code 561910 indicating it falls under other support activities for transportation. The work must be performed to meet the U.S. Department of Defense’s requirements, specifically under the ASC Commodities Division, and all shipments must be directed to government-designated locations without exception. The solicitation is open with a response deadline of July 31, 2026, and is structured as a subcontract opportunity, meaning the winning entity will likely serve as a supplier or service provider to a prime contractor involved in the larger defense logistics chain. All operations must adhere strictly to military packaging and marking protocols to ensure accountability, traceability, and readiness upon receipt. While the exact place of performance and point of contact are not specified, the contract is administered through the DLA DIBBS system, and interested parties must submit their proposals through the official portal before the deadline to be considered.
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) ServicesThe contract solicits qualified small businesses to perform Product Verification Testing (PVT) services for resilient mounts, ensuring their performance, durability, and compliance with government specifications. This subcontract is a Total Small Business Set-Aside under the SBA program, exclusively targeting small businesses as defined by the North American Industry Classification System code 541380, which covers scientific and technical consulting services. The testing activities must be conducted in accordance with directives issued by the Department of Defense, specifically through the ASC Commodities Division, and the work is expected to validate that resilient mounts meet rigorous operational standards required for defense applications. All proposals must be submitted by the deadline of July 31, 2026, and the opportunity is posted on the DIBBS platform for potential offerors to access full technical details and requirements.
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 326220
New
DIBBS
Material Supply for Resilient Mounts (Elastomeric and Metal Components)The contract solicits the supply of specialized rubber, elastomers, and high-strength alloys specifically for the fabrication of resilient mounts, requiring full traceability and comprehensive certification documentation for all materials delivered. All components must meet stringent quality and performance standards to ensure reliability in demanding operational environments, with documentation supporting material origins, processing, and compliance with applicable specifications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and falls under the NAICS code 326220 for rubber product manufacturing. The opportunity was posted on July 22, 2026, with a response deadline of July 31, 2026, and is managed by the ASC Commodities Division within the Department of Defense. While the exact delivery location and point of contact are not specified, all work must be performed in alignment with federal procurement guidelines and the technical requirements for resilient mount components.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Precision Machining and Fabrication of Resilient MountsThe contract calls for the manufacture of resilient mounts in accordance with detailed technical specifications, encompassing material selection, precision machining, forming processes, and surface finishing to meet exact performance criteria. All items must comply with MIL-STD-129 for proper marking and packaging, ensuring uniformity and readiness for military logistics and distribution. The work is structured as a small business set-aside under the SBA program, exclusively available to total small businesses, and falls under the NAICS code 332999 for other fabricated metal product manufacturing. The solicitation was posted by the ASC Commodities Division under the Department of Defense with a response deadline of July 31, 2026, and execution is expected to support defense supply chain requirements without specifying a particular performance location.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Test Sample Preparation and HandlingThe contract requires the preparation, labeling, and management of Product Verification Test Samples with strict segregation from regular inventory, ensuring these samples are distinctly marked with the phrase “Do Not Post to Stock” along with the associated contract number and lot or item number. All specimens must be handled in accordance with specific procedural controls to maintain traceability and prevent accidental deployment into the supply chain. The work falls under a HUBZone Set-Aside subcontract, designated for businesses located in Historically Underutilized Business Zones, with the NAICS code 541380 indicating scientific and technical consulting services. The solicitation is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 5, 2026, and was posted on July 22, 2026. The place of performance and detailed point of contact information are not specified, but the official solicitation can be accessed through the DIBBS platform.
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Export-Controlled Technical Data Management (ITAR/EAR)This contract requires the management of ITAR and EAR-controlled technical data under strict compliance protocols, ensuring that only personnel who are both JCP-certified and trained in export regulations are permitted to access or handle such data. The scope of work centers on maintaining adherence to DFARS 252.225-7048, which outlines safeguarding requirements for controlled technical information within the Department of Defense supply chain. All activities must be conducted with rigorous oversight to prevent unauthorized disclosures and ensure compliance with U.S. export control laws. The contract is designated as a subcontract under a HUBZone Set-Aside, reflecting a preference for small businesses located in historically underserved zones. It falls under the NAICS code 541611 for administrative management and general management consulting services, indicating a focus on operational and compliance oversight rather than direct manufacturing or technical development. The solicitation is posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of August 5, 2026, and all performance obligations must be fulfilled in alignment with federal export control standards regardless of physical location.
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract pertains to the identification of hazardous materials involved in manufacturing and packaging processes, with a mandate to author and maintain Safety Data Sheets in strict accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313. It requires diligent compliance with federal regulations governing hazard communication, including the accurate labeling of all hazardous substances to ensure workplace safety and regulatory adherence. The subcontract is designated as a HUBZone Set-Aside, prioritizing qualified small businesses located in historically underutilized business zones, and falls under the NAICS code 541620 for environmental consulting services. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, and is issued by the ASC Commodities Division under the Department of Defense, though specific performance location and point of contact details are not provided.
Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541990
New
DIBBS
MIL-STD-129 Marking, Labeling, and Bar-CodingAll containers must be marked and labeled in full compliance with MIL-STD-129 requirements, including application of ITF-14 GS1 barcodes, hazard communication labels, and special identifiers such as Do Not Post to Stock for test samples. The contract is a HUBZone set-aside subcontract under NAICS code 541990, issued by the ASC Commodities Division of the Department of Defense, and is open for response until August 5, 2026. Performance is expected to meet standardized military labeling criteria for proper identification, safety, and logistics tracking across the supply chain.
All Other Professional, Scientific, and Technical Services

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging and preservation services strictly aligned with MIL-STD-2073-1E and DLA RP001 standards, encompassing cleaning, drying, wrapping, and packaging of military-grade items for secure shipment. This includes the implementation of intermediate container packaging and proper palletization to ensure full compliance with Department of Defense transportation and storage requirements. All work must meet rigorous military specifications to guarantee the integrity and longevity of equipment and supplies throughout the supply chain. This is a HUBZone set-aside subcontract under NAICS code 493190, reserved for businesses certified in Historically Underutilized Business Zones, and is issued by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and performance is expected to support military logistics operations without specified geographic limitations. Subcontractors must demonstrate capability to execute all prescribed packaging procedures in accordance with federal military standards and be prepared for audit and compliance verification.
Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
Special Purpose Electrical Cable Assembly ManufacturingThe contract involves the full manufacturing of 150 units of a military-spec electrical cable assembly designated by NSN 6150-01-607-0307 over a five-year period, with all phases including design validation, component sourcing, assembly, testing, and delivery required to meet zero-defect quality standards. The work is scoped under a subcontract classification with a HUBZone set-aside, targeting small businesses located in historically underutilized business zones to promote economic development in disadvantaged areas, and falls under the NAICS code 335999 for other electrical equipment and component manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and the procurement is managed by the ASC Commodities Division within the Department of Defense, though specific performance location and point of contact details are not provided. All deliverables must comply with strict military specifications and quality assurance protocols to ensure mission-critical reliability in operational environments.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 484220
New
DIBBS
Shipping and Delivery Coordination (F.O.B. Origin)The contract involves managing shipment logistics from the contractor’s facility to multiple CONUS stock locations, with responsibilities including preparing bills of lading and submitting documentation through WAWF. It is structured as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, ensuring eligibility is limited to small businesses certified by the SBA. The NAICS code 484220 classifies the work under truck transportation services, specifically specialized freight trucking not elsewhere classified. The contract is governed under F.O.B. Origin terms, meaning ownership and risk transfer to the buyer at the point of departure from the contractor’s facility. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026, and is being procured by the ASC Commodities Division under the Department of Defense. All performance activities are confined within the continental United States, and the contract details are accessible via the DIBBS platform.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Sampling ServicesThis contract requires the provision of quality inspection and sampling services under the strict standards of MIL-STD-1916 or ASQ H1331, with an absolute requirement of zero non-conformances across all verification levels—critical, major, and minor. The work involves rigorous adherence to sampling protocols and inspection methodologies to ensure products meet uncompromising quality benchmarks, typical of defense and high-reliability applications. Services must be performed with precision and consistency to avoid any deviations that could result in rejection or non-compliance. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 541330 for scientific and technical consulting services. It is issued by the ASC Commodities Division of the Department of Defense with a response deadline of August 5, 2026, and was posted on July 22, 2026. While specific performance location and point of contact details are not provided, interested parties must access the official DIBBS portal via the listed UI link to obtain full solicitation materials and submit proposals in accordance with federal procurement guidelines.
Engineering Services

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details