Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Integrated Topo-Bathymetric LiDAR Payload Supplier

Active

International

Response Deadline10/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of a factory-integrated topo-bathymetric LiDAR payload for prime contractors working on National Research Council of Canada projects. The required hardware must feature a 532 nm green laser system with full-waveform recording, measurement rates reaching 200 kHz, a 20MP RGB camera, and survey-grade GNSS/INS. Technical specifications mandate that the payload be IP64 rated, weigh less than 12 kg, and operate within a power range of 18 to 34 VDC. The successful supplier is responsible for delivering the integrated hardware payload along with all necessary calibration documentation. Performance of the contract is centered in the National Capital Region of Canada. Interested parties should note the response deadline of October 26, 2026, for this Government of Canada procurement opportunity.

General Info

Supply of topo-bathymetric LiDAR payload for NRC projects by October 26, 2026.

Agency

Government of Canada → National Research Council of Canada

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58124.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Question/Answer #2 RFP 26-58124 Remotely Piloted Aircraft System (RPAS)-Deployable Integrated Topographic and Bathymetric (Topo-Bathymetric) LiDAR System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 07:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a factory-integrated topo-bathymetric LiDAR payload for prime contractors on National Research Council of Canada (NRC) projects. Provides a 532 nm green laser system with full-waveform recording, measurement rates up to 200 kHz, survey-grade GNSS/INS, and a 20MP RGB camera. Hardware must be IP64 rated, weigh under 12 kg, and support 18–34 VDC. Delivers the integrated hardware payload and calibration documentation.

Similar Contracts

Same NAICS industry code

RECEIVER,COUNTERMEA

Solicitation # N0038327QMA09

Navsup Weapon Systems Support

POSTED

about 1 hour ago

DEADLINE

Solicitation # N0010426QLC44

Solicitation N0010426QLC44 is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Detection Unit, NIIN 123891629. The scope of work requires the unit to be repaired to meet operational and functional requirements associated with Cage Code 360H2 and Reference Number 275000, including an update to 2017 firmware if necessary. All work must adhere to the contractor's standard repair practices and approved government documents. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The contract mandates a delivery timeline of 30 days, FOB Destination, to the DLA Distribution New Cumberland facility. Strict quality assurance and marking standards apply, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073 and ASTM D3951-18. Contractors are responsible for all inspections and must maintain records for 365 days post-delivery. Invoicing must be processed through the Wide Area Workflow system. Additionally, the contractor must provide Material Safety Data Sheets for any hazardous materials and comply with DFARS cybersecurity and Buy American regulations.

Navsup Weapon Systems Support Mech

POSTED

about 1 hour ago

DEADLINE

66--DETECTOR KIT,GAS

Solicitation # SPE7M127T1415

DLA Weapons Support

POSTED

about 1 hour ago

DEADLINE

66--MECHANISM,TRANSMISSION

Solicitation # SPE4A727T1795

POSTED

about 1 hour ago

DEADLINE

MODULATOR,RADIO TRA

Solicitation # N0038327QMA13

Navsup Weapon Systems Support

POSTED

about 1 hour ago

DEADLINE

66--INDICATOR,POSITION

Solicitation # SPE4A527T1686

POSTED

about 1 hour ago

DEADLINE

TRANSMITTER,INDUCTI

Solicitation # N0038327QSA21

Navsup Weapon Systems Support

POSTED

about 1 hour ago

DEADLINE

in about 1 month

66--LAMP HOUSING ASSEMBLY

Solicitation # SPE4A727T1815

POSTED

about 1 hour ago

DEADLINE

RECEIVER,COUNTERMEA

Solicitation # N0038327QMA08

Navsup Weapon Systems Support

POSTED

about 1 hour ago

DEADLINE

N0038326PR0R795_FMS REPAIR

Solicitation # N0038327QN142

Navsup Weapon Systems Support

POSTED

about 1 hour ago

DEADLINE

RECEIVER,COUNTERMEA

Solicitation # N0038327QMA12

Navsup Weapon Systems Support

POSTED

about 1 hour ago

DEADLINE

66--CASE ASSEMBLY,TRANSMIT

Solicitation # SPE4A527T1726

POSTED

about 1 hour ago

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Precision Instrument TransportationThe Precision Instrument Transportation subcontract involves the secure shipping and delivery of high-value optical and electronic survey equipment for prime contractors working on National Research Council of Canada projects. The scope of work specifically requires specialized handling and secure packaging of precision LiDAR payloads to ensure that calibration shifts are prevented during transit, culminating in the delivery of the integrated system to a designated NRC facility. This opportunity is managed by the Government of Canada under NAICS code 484220, with the place of performance located in the National Capital Region of Canada. The solicitation was posted on October 21, 2026, and requires a response by October 26, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

LiDAR System Operational & Technical TrainingThis subcontract involves providing specialized technical training for prime contractors working on National Research Council of Canada projects. The scope of work focuses on instructing up to four personnel in the operation, calibration, and deployment of topo-bathymetric LiDAR utilizing medium-class remotely piloted aircraft systems. Additionally, the contractor is responsible for delivering training on hydrographic processing workflows, quality assurance and quality control procedures, and factory boresight maintenance, culminating in the delivery of completed training sessions and technical documentation. The project is managed by the Government of Canada under the National Research Council of Canada and will be performed within the National Capital Region. Interested parties should note the solicitation timeline, with a posting date of October 21, 2026, and a response deadline of October 26, 2026. The contract is categorized under NAICS code 611519.

Other Technical and Trade Schools

POSTED

DEADLINE

LiDAR Processing Software and Workflow ProviderThis subcontract involves the provision of hydrographic processing software and licenses to support prime contractors working on projects for the National Research Council of Canada. The scope of work focuses on implementing specialized workflows for mission planning, kinematic LiDAR processing, full-waveform bathy analysis, and RGB QA/QC, with a specific requirement for refraction correction to ensure accurate water penetration. The selected provider must ensure all software is compatible with Applanix POSPac and deliver a manufacturer-supported processing workflow capable of LAS export. Performance for this contract will take place within the National Capital Region of Canada, falling under NAICS code 513210.

Software Publishers

POSTED

DEADLINE

ISO/IEC 17020 Accredited Plant Inspections (IPI & FPI)This subcontract involves performing technical plant inspections for prime contractors on projects for the National Research Council Canada. The selected provider will be responsible for conducting Initial Plant Inspections and annual Follow-up Plant Inspections to ensure product consistency aligns with documented quality systems and CCMC assessments. All completed CCMC Plant Inspection Forms must be submitted electronically. To be eligible, the provider must hold ISO/IEC 17020 accreditation recognized by both ILAC and IAF. The work is performed within Canada under NAICS code 541380. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Question/Answer #2 RFP 26-58124 Remotely Piloted Aircraft System (RPAS)-Deployable Integrated Topographic and Bathymetric (Topo-Bathymetric) LiDAR System

Solicitation # 26-58124

The National Research Council of Canada is soliciting proposals for one integrated topo-bathymetric LiDAR system to be deployed on medium-class Remotely Piloted Aircraft Systems (RPAS). This system will support the Centre for Drone Innovation in research, development, and operational deployments, specifically for capturing above-water topography and shallow-water bathymetry. Key technical requirements include a 532 nm green laser for water penetration of at least 2 meters, unconditional full-waveform recording, and user-selectable measurement rates up to 200 kHz. The payload must weigh no more than 12 kg, operate on a 18–34 VDC power supply, and feature an IP64 ingress protection rating. It must also include a survey-grade GNSS/INS compatible with Applanix POSPac, a co-aligned RGB camera with at least 20 megapixels, and a comprehensive manufacturer-supported hydrographic processing software workflow. The contract is awarded based on the lowest evaluated price among bidders who meet all mandatory technical criteria. The successful contractor must deliver the system to Ottawa, Ontario, within twelve weeks of the contract award, with a final performance deadline of March 31, 2027. Deliverables include the hardware, OEM software licenses, and comprehensive training for up to four NRC personnel. The system must come with a minimum twelve-month manufacturer warranty and a defined maintenance schedule. Proposals must be submitted via email by October 26, 2026, at 2:00 PM EDT, divided into separate technical, financial, and certification volumes.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Various equipment

Solicitation # 25-58191

The National Research Council Canada is soliciting a Standing Offer for the supply, delivery, installation, and commissioning of various scientific and laboratory equipment to support research activities across multiple sites in Canada. A critical component of this procurement involves third-party inspection services, including initial and follow-up plant inspections conducted in Canada, the United States, or via virtual means. Service providers must hold a valid ISO/IEC 17020 accreditation recognized by the International Laboratory Accreditation Cooperation and adhere to strict CCMC marking and labeling requirements. The initial period of performance is set from April 1, 2026, to March 31, 2027, with the possibility of four additional one-year extensions through March 31, 2031. Award selection is based on the highest combined rating of technical merit, weighted at 65 percent, and pricing, weighted at 35 percent. To be compliant, offerors must achieve a minimum of 15 points on the technical evaluation. Pricing is evaluated on a lowest-cost basis across specific inspection codes. Proposals must be submitted as separate technical and financial attachments, with a strict prohibition against including pricing in the technical volume to avoid disqualification. Administrative requirements include compliance with reciprocal procurement policies, anti-forced labour regulations, and the provision of security clearance levels. Payments are processed through various electronic methods, including direct deposit and Mastercard purchase cards, managed by the NRC Finance and Procurement Directorate in Ottawa.

Building Inspection Services

POSTED

DEADLINE

Hydrographic Processing Software & TrainingThis subcontract involves the provision of manufacturer-supported software and technical training for prime contractors working on Remotely Piloted Aircraft Systems projects for the National Research Council of Canada. The scope of work includes the delivery of specialized software licenses designed for system calibration, water-surface modelling, refraction correction, and full-waveform bathymetric analysis with LAS format export capabilities. In addition to the software delivery, the contract requires the execution of specialized technical training sessions for four designated personnel. The project is managed under the Government of Canada and is to be performed within the National Capital Region.

Custom Computer Programming Services

POSTED

DEADLINE

High-Resolution RGB Camera SupplyThis subcontract involves the supply of a high-resolution RGB camera to support prime contractors working on Remotely Piloted Aircraft Systems projects for the National Research Council of Canada. The required hardware must feature a minimum resolution of 20 megapixels and be precisely co-aligned with the LiDAR sensor to enable the co-referencing of LiDAR data with real-color imagery. These specifications are essential for creating draped surface products and supporting Structure-from-Motion applications. The contract entails the delivery of one integrated 20MP RGB camera, with performance taking place in the National Capital Region. Managed under the Government of Canada, the opportunity is categorized under NAICS code 423410. Interested parties should note the response deadline of October 26, 2026.

Photographic Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Survey-Grade GNSS/INS Integration & LicensingThis subcontract involves the supply and integration of survey-grade GNSS and INS systems for prime contractors working on National Research Council of Canada RPAS projects. The scope of work focuses on delivering integrated hardware and software licenses that meet strict precision standards, including horizontal accuracy of 5 cm or less, vertical accuracy of 10 cm or less, roll and pitch accuracy of 0.02 degrees, and heading accuracy of 0.05 degrees. The project requires that all hardware be fully compatible with the Applanix POSPac trajectory post-processing workflow. Performance will take place within the National Capital Region, and the contract is categorized under NAICS code 334511 for the Government of Canada.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Topo-Bathymetric LiDAR Sensor System SupplyThis subcontract involves the supply of a factory-integrated topo-bathymetric LiDAR system designed for prime contractors working on National Research Council of Canada RPAS projects. The selected provider must manufacture and integrate a single LiDAR payload featuring a 532 nm green laser capable of water penetration of at least 2 meters, unconditional full-waveform recording, and a scanning field of view of at least 40 degrees. To ensure durability in various environments, the system must be housed in IP64-rated casing and remain operational at temperatures as low as -10 degrees Celsius. The project is managed under the Government of Canada through the National Research Council of Canada, with performance taking place in the National Capital Region. The procurement is categorized under NAICS code 334511. Interested parties should note the response deadline of October 26, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

International Freight and Customs ClearanceThis subcontract for International Freight and Customs Clearance supports prime contractors on research projects for the National Research Council Canada. The scope of work involves managing Delivered-at-Place shipping, handling all customs duties, and completing necessary documentation for the transport of sensitive laboratory machinery. Specifically, the contractor is responsible for the delivery of a 3D printing system to an NRC facility located in Mississauga, Ontario. To qualify for this engagement, the provider must be a licensed Customs Broker and possess specialized heavy equipment rigging capabilities. The project falls under NAICS code 488510 and is managed through the Government of Canada. Interested parties must adhere to the response deadline of October 29, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Slurry Feedstock Supply (Metals, Ceramics, Polymers)This subcontract involves the supply of curable liquid slurry feedstock to prime contractors supporting research projects for the National Research Council of Canada. The required materials consist of liquid suspensions featuring high-purity metal powders, ceramic powders, and compatible liquid polymer binders, which are specifically engineered for solidification via temperature-based or light-based processes. All delivered feedstock must strictly adhere to the drawings and technical specifications associated with each individual project. Managed by the Government of Canada, the contract falls under NAICS code 325998 and is to be performed within Canada. Interested parties must note the response deadline of October 29, 2026, for this procurement opportunity.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS