Intelligent Power Technology Generator Set, Diesel Engine (Genset)

Defense Logistics Agency intends to obtain Intelligent Power Technology (IPT) (digital) Generator Set, Diesel Engine (Genset) that is mounted on the Trailer Mounted Support System (TMSS) trailer and provides power to the rest of the TMSS systems. DLA requires three phase Gensets rated for 18 kw and for 33 kw with an IPT (also known as a digital) feature that enables connectivity between generators to allow for efficient power production (also known as - smart grid technology). The TMSS system is part of the Standardized Integrated Command Post System (SICPS) suite of systems. The 18 kw Genset will bolt onto the HDT, Inc. HP2C (TMSS Medium) trailer with no modifications, and the 33 kw Genset will bolt onto the HDT, Inc. HP-8 (TMSS Large) trailer with no modifications. Additional technical specifications can be provided upon request. For past procurements, this item was supplied by HDT Expeditionary Systems, Inc. This survey is published in compliance with FAR Part 10, (Market Research). The purpose of this survey is to canvass the industry for any possible sources for the Gensets identified below. This request for information does not constitute a request for proposals. Submission of any information in response to this market survey is purely voluntary. The Government assumes no financial responsibility for any costs incurred in responding or in any subsequent exchange of information. This Sources Sought Announcement (SSA) is released for purposes of conducting market research to identify additional sources for the production of the Line Repairable Unit (LRU) used in the SICPS system NSN Description Part # Min Poss. QTY Max Poss. QTY 6115-01-685-0862 Genset w/ENCL, 18 kw, IPT (Tan) 1013002 7 40 6115-01-685-0283 Genset w/ENCL, 18 kw, IPT (Green) 1013682 7 35 6115-01-678-4623 Genset w/ENCL, 33 kw, IPT (Tan) 1013913 2 15 6115-01-680-1092 Genset w/ENCL, 33 kw, IPT (Green) 1013914 2 10 This LRU a commercially available Genset utilized in the TMSS (PU-823A/T, PU-824B/T, PU-821/T, and PU-822A/T). It is the only known technically acceptable part for its application only a form, fit, and function identical part will suffice. This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract based on this SSA or reimburse any costs associated with the preparation of responses to this SSA. NO funds have been authorized, appropriated, or received for award of a contract at this time. This Sources sought announcement (SSA) is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. The USG CANNOT guarantee specific requirement for production of LRUs. However, minimum projection is currently estimated at a total quantity of 7 for NSN 6115-01-685-0862, 7 for NSN 6115-01-685-0283, 2 for NSN 6115-01-678-4623, and 2 for NSN 6115-01-680-1092 units for production. It is highly encouraged that interested sources fully capable of satisfying potential supply for these items identify and submit their best economic range quantity to achieve manufacture cost savings as part of responses to this announcement for consideration. Source control drawings, performance and finish specifications do not exist for these LRUs, these documents will not be provided if and when the USG release a RFP/Solicitation. Detailed data for repair and/or manufacturing, inspections and test procedures and other documentation pertaining to the existing design WILL NOT be supplied by the Army as they are not available.