Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Intent to Sole Source - Channel Monster Sewer Grinder

Active

FA2835-1808Federal

Response Deadline08/18/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of the Air Force, through the 66th Air Base Group Civil Engineering and AFLCMC/PZI, intends to award a sole source contract to JWC Environmental for the purchase of a new Channel Monster sewer grinder, including warranty coverage. This procurement is classified under NAICS code 333248 and is not subject to any set-aside provisions, indicating no preference is given to small businesses or other designated categories. The solicitation number is FA2835-1808, with the notice posted on August 3, 2026, and responses due by August 18, 2026. The equipment will be delivered and installed at a performance location in Massachusetts. Primary point of contact for inquiries is Jason Scales, with A. Patrick Coit listed as secondary contact, both reachable via official Air Force email addresses. Additional details are available in the attached NOCA, and more information can be accessed through the provided SAM.gov link.

General Info

Department of the Air Force sole source contract to JWC Environmental for sewer grinder delivery and installation in Massachusetts.

Agency

Department Of Defense → Department Of The Air ForceView Agency

NAICS

333248 - All Other Industrial Machinery ManufacturingView NAICS

Place of Performance

0, MA, USA

Set-Aside

NONE

Documents

(1)

NOCA+for+Channel+Monster+1808+signed.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedAug 3

special-notice

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 02:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Department Of The Air Force

Contacts2 people available

OfficeN/A

Organization / Agency

Department Of Defense → Department Of The Air Force

View Agency Profile

Office AddressN/A

Contacts

Jason Scales

contact@example.gov

A. Patrick Coit

contact@example.gov

Full Description

Show more

The 66th Air Base Group, Civil Engineering (66 ABG/CE) and AFLCMC/PZI intend to award a sole source contract to JWC Environmental for the purchase of a new channel monster sewer grinder, that includes a warranty coverage.

Please see the attached NOCA for additional information.

Similar Contracts

Same NAICS industry code

Solicitation # SPE2DH-26-T-5736

The contract specifies the procurement of litmus paper in a commercial packaging configuration, with each unit individually sealed in foil packets and packaged in groups of 30 per page, designated as one unit of issue. All packaging must meet stringent commercial standards to ensure protection against damage and breakage during transit, with exterior shipping containers suitable for safe delivery by common carriers at the lowest cost to the specified delivery point. The product must comply with the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all labels must clearly display the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The material must have an 18-month shelf life, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Additionally, each foil packet features a color chart for pH indication, and bidders are required to identify the specific source and part number being offered. The item is governed under solicitation SPE2DH-26-T-5736, with a response deadline of August 10, 2026, and delivery required within 20 days of award. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contract also includes provisions for the removal of government identification from non-accepted supplies, while covered defense information may apply.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

SV0222-26 DLP Printer

Solicitation # SV0222-26

Unicor is seeking a digital license plate printing system capable of producing full-color license plates using either UV-curable inkjet or thermal transfer ribbon technology, with the ability to print cyan, magenta, yellow, black, and customizable colors in a continuous indexing queue. The printer must handle reflective license plate sheeting on supply and take-up rolls with air-actuated expansion mandrels, accommodate both 12-inch automotive and 7-inch motorcycle plates, and support printing on blank, pre-marked, or pre-printed substrates with precise registration to cue marks. The system must include software for image processing, color management, database tracking of print jobs and shipments, data integration via templates, RIP processing, and comprehensive print management with a Windows-based interface. All software must operate on Windows 11 Professional/Enterprise with elevated privileges disabled, function entirely offline without external connectivity for licensing or updates, and support role-based access control. The system must generate randomized seven-character plate numbers in the format of one number, two letters, and four numbers, prevent duplicates across all produced plates, and enable batch synchronization with external systems via file transfer since no network connectivity is permitted. The printer must monitor a specified directory for automated job initiation via PDF file drops, allow multiple queued jobs during active printing, and operate at 600 dpi or higher with specified throughput rates at each resolution. Installation includes full hardware and software setup, calibration, quality control verification, and coordination with Unicor staff to comply with computer access restrictions. Onsite training at the Federal Correctional Institution in Cumberland, Maryland, must be provided for operators covering standard operation, maintenance, software configuration, and troubleshooting, with the option for additional training within six months. The vendor must clearly outline all included hardware and software accessories without hidden costs, provide a detailed warranty covering both manufacturer and third-party terms, disclose actions that void the warranty, and describe comprehensive post-warranty support including telephone, email, and onsite service with defined response times, availability hours, and associated labor and travel rates.

Dba Federal Prison Industries United States Department Of Justice

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-296A

The contract is for a low-maintenance, factory-filled, pre-pressurized pH probe designed for extensive use in biotechnology, pharmaceutical, and chemical process industries. Each unit is sold individually, with a total quantity of two units requested under purchase request 7017676043. The item is identified by NSN 6640-01-688-0401 and must be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The solicitation, numbered SPE2DS-26-T-296A, was posted on August 2, 2026, with responses due by August 10, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Goose Creek, South Carolina, 29445-8612. Primary point of contact is Olusola Emmanuel, reachable at olusola.emmanuel@dla.mil or 4457373766.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

TUBE, BIOLOGICAL CULTUR

Solicitation # SPE2DH-26-T-5705

The contract solicitation SPE2DH-26-T-5705 is for the procurement of 1,000 units of polypropylene biological culture tubes, each 12x75 mm in size with a 5 mL capacity, supplied sterile, autoclavable, and endotoxin-free, packaged in cases of 1,000 units (125 tubes per bag, eight bags per case). The product is identified by NSN 6640-01-705-0413 and must meet stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including RA001 for technical specifications and RP001 for packaging standards. Deliveries are due within 20 calendar days of award to FPO, 96694, with FOB Destination terms placing responsibility for transit risks on the contractor. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129 for medical items, and adhere to MIL-STD-2073-1E for packaging integrity, with commercial packaging suitable for common carrier transport and palletization as defined by DLA guidelines. Inspection and acceptance occur at the destination by the government, with compliance verified against quality, labeling, and documentation standards. The solicitation emphasizes automated award potential under a Lowest Price Technically Acceptable (LPTA) method and includes a HUBZone price evaluation preference, though no explicit evaluation factors or weighting criteria are detailed. Contractors must represent their small business status, UEI, and CAGE code, and address socioeconomic categories including HUBZone eligibility. Special requirements include compliance with hazardous material labeling under 252.223-7001, adherence to cybersecurity standards outlined in 252.240-7997 and 252.204-7016, and full implementation of FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and restrictions on forced arbitration. Invoicing is mandated through WAWF, with payment processed via designated DoDAACs tied to the award. The contract enforces strict prohibition on acquisition of items from Communist Chinese military companies and hexavalent chromium use, and requires adherence to DLA’s packaging, preservation, and marking standards without predefined materials, leaving those determinations to the contractor based on product sensitivity. Technical and quality compliance

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

PRESS, ARBOR, HAND OP

Solicitation # SPE8E5-26-T-3751

The contract pertains to the procurement of one hand-operated press arbor identified by NSN 3444-01-565-4432 under solicitation SPE8E5-26-T-3751, with a delivery requirement of 20 days after award. The acquisition is governed by DLA packaging and technical requirements referenced through the DLA Master List of Technical and Quality Requirements, where any R or I numbered provisions are binding and incorporate the latest applicable revision as of the solicitation issue date or award date, depending on the scale of the acquisition. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware or its direct contact, with exceptions permitting functional mercury in specific items such as batteries, fluorescent lights, instrumentation, sensors, controls, weapon systems, and chemical reagents explicitly authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier compliant with NAVSEA 5100-003D. The supplier must be procured from approved sources only, with full compliance expected on all technical, quality, and environmental control criteria. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the point of contact is Ira Hedgepeth at DLA, reachable via email and phone provided. The place of performance is designated as FPO with a ZIP code of 09565, and the procurement falls under NAICS code 333248 as a federal action managed by the Department of Defense through the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

Large Slurry Mixer

Solicitation # 26-58093

The National Research Council of Canada is soliciting a large slurry mixer for use in its Clean Energy Innovation Research Center to support the development of viscous battery slurries for a prototyping line, with the goal of enhancing efficiency and operational versatility. This procurement, under solicitation number 26-58093, is governed by the Policy on Reciprocal Procurement, which restricts eligibility exclusively to Canadian suppliers and suppliers from applicable trading partners; offers from non-trading partner entities will be rejected. The contract requires the delivery of a single large slurry mixer meeting strict technical specifications, including a maximum footprint of 2000 kg, dimensions no greater than 3000 mm in depth and height and 2000 mm in width, and a stand-alone, floor-mounted design operable by a single person. The system must include a cooling/heating capacity of at least 5000 kCal/h (6 kW) at 10°C with automatic temperature control and real-time temperature display on a control panel. The full scope includes final design and drawings for NRC approval, successful Factory Acceptance Test (FAT), delivery of the complete mixer with all accessories and documentation, on-site installation, Site Acceptance Test (SAT) approval, and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with key milestones set at two months for design approval, five months for FAT completion, and eight months for delivery. Payment is on a firm unit price, fixed-price basis, with no advance payments and invoices submitted only after each deliverable is completed. The contract includes a mandatory 12-month warranty or the contractor’s standard warranty, whichever is longer, and requires compliance with environmentally preferable packaging standards and the NRC’s Security Requirements Checklist. The contractor must comply with Canadian federal ethics standards, including the Conflict of Interest Act and the Values and Ethics Code for the Public Service, and is subject to audit and oversight under the Accounts and Audit provisions. Payment terms specify 30 days for undisputed invoices, with 15 percent withholding for non-resident contractors unless a valid waiver is provided by the Canada Revenue Agency. The mixer will be delivered under Incoterms® 2020 DAP to 75, de Mortgage Boulevard, Boucherville, QC, J4B 6Y4, with shipping accessible only via de Lauzon Street. Proposals must be submitted electronically in three distinct sections—Technical Offer, Financial Offer,

National Research Council of Canada

POSTED

DEADLINE

SCOOP, LABORATORY

Solicitation # SPE2DH-26-T-5667

The contract is for the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, designed for retrieving samples from larger sources. The product is white and packaged in boxes of ten units each, with a total requirement of three boxes. These scoops must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition type. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The NSN is 6640-01-722-5866, and the purchase request number is 7017680517. Delivery is required within 20 days from award. The solicitation number is SPE2DH-26-T-5667, issued by the Department of Defense’s Medical Supply Chain FSH, with performance at Tinker AFB, Oklahoma. The primary point of contact is Tina Vu, reachable via email and phone provided. Responses are due by August 6, 2026, and the solicitation was posted on July 30, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE8EE-26-Q-0412

The contract pertains to the procurement of 27 units of BLOCK, TACKLE with NSN 3940-01-709-0208 under solicitation SPE8EE-26-Q-0412, with a response deadline of August 8, 2026, and delivery required within 167 days after order. The item is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the version of the master in effect on the solicitation or award date, depending on acquisition size. The contractor must adhere to cybersecurity requirements by being a CMMC Level 2 Certified Third-Party Assessment Organization and comply with all applicable DLA packaging specifications. Export control policies under ITAR or EAR strictly regulate any technical data associated with the item, prohibiting unauthorized disclosure to foreign persons regardless of location, and require contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive formal approval from DLA to handle the controlled data. The Defense Logistics Agency limits access to authorized entities only, and DFARS 252.225-7048 governs the handling of such information. The solicitation is a federal procurement under NAICS code 333248, with Marsha Brenner identified as the primary point of contact.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # 2031ZA26N00051

The Bureau of Engraving and Printing, under the Department of the Treasury, intends to award a sole source, firm-fixed-price contract to procure ten Graco Pumps 63:1 Ratio 200L D200 Supply Units with Part Number RCM1559 for use on Super Orlof Intaglio Presses in currency manufacturing. Although the requirement specifies the Graco brand name to ensure compatibility and performance with critical equipment, the contract is fully set aside for small businesses, encouraging competition among authorized small business distributors and resellers who can supply genuine manufacturer components. This procurement will be conducted using simplified acquisition procedures and a Justification and Approval for sole source sourcing. The notice is not a solicitation for offers but serves as a transparency measure to allow industry participants to assess their ability to meet the requirement. Any costs related to responding to this notice, including the preparation of capability statements or inquiries, are the sole responsibility of the respondent and will not be reimbursed. All submissions must be sent via email to erica.hemphill@treasury.gov no later than 5:00 PM Eastern Standard Time on August 12, 2026. Respondents must be registered and active in the System for Award Management, and the contract performance will take place in Fort Worth, Texas, with the North American Industry Classification System code 333248. The solicitation number is 2031ZA26N00051 and was posted on July 29, 2026.

Bureau Of Engraving And Printing

POSTED

DEADLINE

Solicitation # SPE2DH-26-T-5578

LITMUS PAPER, ACS, 30’S under NSN 6640-01-485-6075 must be packaged in commercial-grade sealed unit containers that protect against damage or breakage, with exterior shipping containers suitable for safe delivery via common carriers at the lowest cost to the designated delivery point in APO, 96368-5268. Each unit consists of 30 strips per packet, packed in one page (1 PG), with individual strips sealed in foil packets containing a printed color chart for pH determination. The product must have an 18-month shelf life, and no more than three months may have passed between the date of manufacture and delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. Bidders must clearly specify the source and part number being offered. This acquisition is governed by DLA Packaging Requirements for Procurement and incorporates technical and quality standards from the DLA Master List. The solicitation, issued under SPE2DH-26-T-5578, requires bids by August 4, 2026, with delivery expected within 20 days of award.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

MILLING MACHINE, VER

Solicitation # SPE8E5-26-T-3708

The contract pertains to the procurement of two vertical milling machines under solicitation SPE8E5-26-T-3708, awarded by the Defense Logistics Agency on behalf of the Department of Defense. The items, identified by NSN 3417-01-387-1118 and part numbers JMD-18PFN and 350020 from JPW INDUSTRIES INC., are required in a quantity of two units with a delivery deadline of 20 days from award, shipped FOB origin. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers take precedence over general standards. The supplies must be delivered to the designated military receiving facility in San Diego, California, with shipment required via the fastest traceable means—parcel post is prohibited. The unit of issue is each, with no variance permitted in quantity, inspection and acceptance occur at destination, and all markings must adhere strictly to federal packaging and labeling mandates. The delivery must be completed by January 6, 2026, and the contractor is bound by comprehensive DLA technical, quality, and logistical directives that override any conflicting standards. Government use codes, shipping identifiers, and point of contact details are included for administrative control, with primary liaison being Don Trachtman.

Defense Logistics Agency

POSTED

DEADLINE

COVER GLASS, MICROSCOPE

Solicitation # SPE2DH-26-T-5600

The product is a high-quality microscope slide cover glass composed of non-fogging, non-corrosive borosilicate glass with parallel surfaces and uniform homogeneity to ensure consistent wetting. It is optically clear, colorless, and exhibits low auto-fluorescence, making it suitable for all levels of microscopy. Each cover glass is pre-cleaned and washed, ready for immediate use. The dimensions are 22mm by 22mm with a thickness of #1, ranging from 0.13mm to 0.17mm. The item is sold by weight in 1-ounce containers, with ten containers per package. The unit of issue is each. The NSN is 6640-01-718-7221, and the purchase request number is 7017651767. Delivery is required within 20 days after order placement. This solicitation, identified as SPE2DH-26-T-5600, was posted on July 28, 2026, with a response deadline of August 4, 2026. It is issued under the NAICS code 333248 by the Department of Defense through the Medical Supply Chain FSH, with performance at APO 09094-3219. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies. The primary point of contact is Tina Vu, reachable via email and phone.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → Department Of The Air Force

Same awarding agency

Platform One Solutions Marketplace (P1SM)/Commercial Solutions Opening (CSO)

Solicitation # FA8307-24-S-C001

The Platform One Solutions Marketplace (P1SM) is a long-term, open-call initiative led by the Department of the Air Force under the Department of Defense to accelerate the discovery, assessment, and integration of innovative hardware, software, and service solutions that enhance the delivery of secure, resilient software capabilities at the speed of relevance. Solicited through FA8307-24-S-C001 and accessible via the digital portal at p1.dso.mil/marketplace, the program invites submissions from U.S. and foreign entities on a continuous basis through monthly windows spanning from September 23, 2024, to December 29, 2026. Proposals must be submitted as a video presentation and accompanying digital form, with no physical materials accepted. Solutions must align with DoD’s Software Modernization Strategy, address critical capability gaps in areas such as DevSecOps, cloud operations, and cybersecurity—including hardened containers—and comply with federal acquisition regulations under FAR/DFARS Part 35 and DFARS Subpart 212.70. All submissions must be unclassified, devoid of Controlled Unclassified Information, export-controlled data, or proprietary markings beyond a standard copyright notice. Evaluation is based on a trade-off approach using weighted criteria including enabling technologies (35%), operational impact (15%), potential scale of impact (15%), problem definition (10%), differentiation, business model validation, and pitch quality. Solutions are reviewed by a peer panel of government, industry, and academic experts and rated as awardable or non-awardable; there is no LPTA basis, and pricing is not submitted as a line item but described at a high level as part of business model validation. Awarded solutions are published in the marketplace for a 24-month period and may be leveraged through rapid acquisition pathways under statutory authorities such as 10 USC 4021 and 4022. Offerors must hold a Unique Entity ID and self-certify their small or large business size status consistent with SAM.gov. Assessors are subject to strict organizational conflict of interest rules, ethics training, and nondisclosure agreements, while submitters must disclose facility clearance, foreign ownership, and FEDRAMP status for informational purposes only. The program is designed to foster innovation through streamlined, transparent, and agile contracting devoid of traditional paperwork, enabling the DoD to rapidly adopt cutting-edge technologies from a diverse global pool of innovators.

Professional, Scientific, and Technical Services

POSTED

DEADLINE

2027 Robins Requirements Symposium - 25 March 2027

Solicitation # 2027_Robins_Requirements_Symposium

The 2027 Robins Requirements Symposium will be held on Thursday, March 25, 2027, from 0700 to 1730 at the Museum of Aviation, Century of Flight Hangar, located at 1942 Heritage Blvd, Robins AFB, Georgia, 31098. This one-day hybrid event, co-hosted by Robins AFB and the National Defense Industrial Association Central Georgia Chapter, is designed to provide industry stakeholders with direct insight into the Air Force’s future acquisition priorities and sustainment needs. Presentations will be delivered by leadership from the Air Force Life Cycle Management Center, the Air Force Sustainment Center, and other Robins AFB organizations, outlining key mission requirements tied to the installation’s goal of delivering War Winning Capabilities on Time, on Cost. The symposium aims to connect government decision-makers with private sector partners, including both large and small businesses, to foster awareness of upcoming contract opportunities aligned with Robins AFB’s strategic objectives. Participation is available both in person and virtually to ensure broad industry access. The event is officially solicited under the identifier 2027_Robins_Requirements_Symposium, posted on July 23, 2026, and is classified as a special notice under the Department of the Air Force, operating within the Department of Defense. Primary point of contact is Jordan Oswald at jordan.oswald.1@us.af.mil, with Robert Robinson serving as the secondary contact. The place of performance is clearly designated as Warner Robins, Georgia, with no set-aside classification specified and no NAICS code assigned. Attendees can expect to gain a comprehensive view of anticipated requirements, sustainment initiatives, and procurement forecasts that will shape future contracting avenues over the coming years, with a conference package awaiting final approval. Further details and registration can be accessed via the provided SAM.gov link.

Convention and Trade Show Organizers

POSTED

DEADLINE

FA465926QM005 - GFAFB MAUS Maintenance - Intent to Sole Source

Solicitation # FA465926QM005

The U.S. Air Force, through the 319th Contracting Squadron at Grand Forks Air Force Base, North Dakota, intends to award a sole source contract for annual maintenance, calibration, and repair of Mobile Automated Ultrasonic Scanner (MAUS) equipment used in the Nondestructive Inspections Lab to inspect RQ-4 airframes for structural defects such as cracks, dis-bonds, and delaminations. This action is justified under statutory authority 41 U.S.C. 1901 and 10 U.S.C. 3204(a)(1), as the MAUS system is a proprietary product line manufactured by Boeing, and only NDT Solutions, LLC holds exclusive authorization from the original equipment manufacturer to access the necessary technical data, parts, and trained personnel required to perform these services. Unauthorized service providers risk causing irreversible damage to multi-million-dollar equipment, voiding warranties, and introducing unacceptable mission risk that could compromise the structural integrity and flight safety of RQ-4 assets. A recent Sources Sought Notice confirmed no other capable vendors exist, and Boeing has formally recognized NDT Solutions, LLC as the sole authorized service provider. The contract, identified by solicitation number FA465926QM005, falls under PSC H316 and NAICS code 811210, with performance located at Grand Forks AFB. Interested parties may submit a capability statement of no more than five pages demonstrating OEM-authorized access to proprietary resources, but submission does not guarantee award and is solely to validate potential exclusivity. All submissions must be emailed to 2d Lt Jarred Cronin by August 4, 2026, at 10:00 a.m. Central Standard Time.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 14 hours

Low-Cost/Affordable Fire Control Radar Request for Information (RFI)

Solicitation # FA8612_RFI_C3BM_2026_0001

The Air Force Life Cycle Management Center’s C3BM Directorate is conducting market research through a Request for Information (RFI) to explore vendor capabilities for a Low-Cost/Affordable Fire Control Radar (FCR). This RFI, identified by solicitation number FA8612_RFI_C3BM_2026_0001 and posted on July 15, 2026, is strictly for informational purposes and does not initiate a procurement process or obligate the government to award a contract. Vendors are invited to respond by the deadline of August 7, 2026, to provide details on their technical solutions, pricing models, and production readiness to support potential future requirements. The effort is aligned with the NAICS code 3345 and is managed by the Department of the Air Force under the Department of Defense. No proposals are being solicited, and unsolicited submissions will not be accepted at this time. The government is not committing to any purchase or future RFP issuance, and responses are intended solely to inform decision-makers about available technologies and market conditions. Primary point of contact for inquiries is Heather Bakker, with Christopher Core available as a secondary contact, both reachable through their official Air Force email addresses. The RFI is accessible through the SAM.gov portal, and participants are encouraged to review any attached documentation for further technical or operational context.

Navigational, Measuring, Electromedical, and Control Instruments Manufacturing

POSTED

DEADLINE

AI/ML for Next Generation of Missile Detection, Warning, Tracking, and Reporting

Solicitation # DAF26BX04-NV507

This contract aims to advance artificial intelligence and machine learning technologies to enhance the U.S. Space Force’s missile warning, tracking, and response capabilities by enabling real-time, multi-sensor fusion across low Earth, medium Earth, and geosynchronous orbits. The initiative targets critical gaps in current systems that struggle with processing vast, heterogeneous data streams from diverse sensing platforms, especially when detecting and tracking hypersonic and maneuverable missile threats. The focus is on developing novel AI/ML algorithms for target identification, data association, and three-dimensional tracking that operate efficiently on both ground and satellite-based systems, reducing latency and improving situational awareness. The goal is to create feasible prototypes and technical demonstrations that can be transitioned into the OPIR Tap Lab or equivalent operational test environments to validate performance under realistic conditions. The solicitation is designated as a Total Small Business Set-Aside under the SBIR/STTR program, restricted to firms with fewer than 500 employees, reflecting a commitment to fostering innovation from small businesses. It was posted on July 1, 2026, with a response deadline of July 22, 2026, and is managed by the Department of Defense through the United States Air Force. While specific location details are not provided, the performance location is expected to support testing and integration within the operational missile defense architecture. Success in this effort will directly contribute to the Space Force’s mission of maintaining persistent global surveillance, accelerating defensive decision-making, and ensuring long-term space superiority through next-generation detection and tracking capabilities.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

Advancing Assured Access: Integrated Digital Capabilities for the 2 SLS to Accelerate Mission Tempo and Readiness

Solicitation # DAF26BX04-DV508

The U.S. Air Force, under the Department of Defense, is seeking integrated digital capabilities to modernize operational processes and accelerate mission tempo and readiness for the 2 SLS. This effort aims to reduce manual workload and enhance decision-making by combining intelligent scheduling assistance, centralized information management, and advanced search functionality into a unified system. The solution must enable rapid access to historical data and institutional knowledge to support training, mission planning, and official duties, ensuring synchronized information and optimized scheduling across all operational phases. All proposed solutions must securely integrate with existing enterprise systems, meet rigorous government security requirements, and deliver usable outputs for frontline operators. The solicitation is designated as a Total Small Business Set-Aside, exclusively open to small businesses with fewer than 500 employees under the SBIR/STTR mandate. Responses are due by July 22, 2026, with the topic posted on July 1, 2026, through the SBA’s SBIR program portal.

Computer Systems Design Services

POSTED

about 1 month ago

DEADLINE

Very Low-Cost Kinetic Defeat for C-sUAS

Solicitation # DAF26BX04-DP025

The Department of the Air Force is soliciting innovative kinetic counter-unmanned aircraft system solutions under solicitation DAF26BX04-DP025, targeting rapid transition to the Air Force Life Cycle Management Center’s Energy Systems division and the Joint Interagency Task Force 401. The focus is on developing highly dispersible, survivable, and scalable interceptors capable of neutralizing Group 1-3 small unmanned aerial systems at a cost under six thousand dollars per engagement while maintaining an effective range of at least eight hundred meters. Systems must be designed for autonomous fire-and-forget operation with no post-launch user input required, and must function reliably in contested, GPS-denied environments. The capability to conduct simultaneous multiple engagements is essential, and integration into existing C-sUAS command and control architectures—including platforms like Medusa—is strongly encouraged. Financial sustainability is a primary driver, aiming to replace expensive interceptors with affordable alternatives to counter mass and swarm tactics effectively. Performance is expected to align with low-collateral operational needs though not mandated, and all proposed solutions must originate from small businesses with fewer than five hundred employees under a total small business set-aside. Proposals are due by July 22, 2026, with a submission window opening on July 1, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 1 month ago

DEADLINE

Commercial-Derived Insights for Novel Tactical Surveillance, Reconnaissance, and Tracking (TacSRT) Capabilities

Solicitation # DAF26BZ01-NV506

The contract seeks rapidly deployable, commercially derived sensing and analytic capabilities to enhance tactical surveillance, reconnaissance, and tracking for warfighters, with a focus on achieving operational utility within one year. It targets non-missile-warning space and ground-based systems that deliver real-time, actionable intelligence by leveraging existing commercial infrastructure and services, eliminating the need for new government-developed space hardware. Solutions must span the sensing-to-analysis continuum—covering data collection, phenomenology exploitation, multi-sensor fusion, change detection, activity characterization, and AI/ML-driven analytics—while enabling speed-of-need decision-making in dynamic operational environments. The program emphasizes innovative approaches such as high-cadence environmental monitoring, deep maritime surveillance, space-to-air or space-to-ground tipping and cueing, and the fusion of structured and unstructured data, all designed to produce testable, operator-ready outputs as an initial operational capability. All proposals must be unclassified and align with the Space Force Commercial Space Strategy, prioritizing commercial space-as-a-service models and proven commercial technologies over government-built systems. Stand-alone hardware, software, analytic tools, or integrated workflows are acceptable, provided they do not involve missile warning, kinetic interceptors, satellite buses, or launch vehicles. The effort is a total small business set-aside, restricted to entities with fewer than 500 employees, and is part of a broader initiative to operationalize commercial innovations faster than traditional acquisition cycles allow. The goal is not to generate operational planning products through existing data marketplaces but to introduce novel, unique capabilities that directly address current gaps in tactical awareness and responsiveness. Proposals are due by July 22, 2026, under solicitation number DAF26BZ01-NV506, issued by the United States Air Force under the Department of Defense.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

STATE OF THE ART (SOTA) MICROELECTRONICS (ME) ADOPTION BROAD AGENCY ANNOUNCEMENT (BAA) FULL TEXT GENERAL ANNOUNCEMENT

Solicitation # 26S1358

The U.S. Department of the Air Force, through SAF/AQC, is issuing a Broad Agency Announcement (BAA) numbered 26-S-1358 to advance the adoption of state-of-the-art microelectronics across national security missions. This BAA does not solicit proposals directly but serves as an umbrella framework for future Topic Calls published on SAM.gov and the Classified IC-ARC, which will define specific technical requirements, submission deadlines, and evaluation criteria. The initiative focuses on accelerating the development and integration of trusted, assured microelectronics technologies, particularly those leveraging Intel 18A process nodes and advanced packaging via Secure Enclave, to ensure enduring technological superiority. Five key mission areas are highlighted: advanced secure microelectronics design and production; next-generation assembly, packaging, and test; novel microelectronics for disruptive capabilities; advanced test, validation, and mission qualification; and building an accessible, affordable, and sustainable domestic microelectronics ecosystem. Topics range from AI/ML architectures and radiation-hardened designs to chiplet-based systems, secure test methodologies, edge computing, RF electronics, PNT resilience, digital twins, and open-standard chiplet libraries. Proposals or White Papers may only be submitted in response to individual Topic Calls, which may be either closed (with fixed deadlines) or open (accepting submissions continuously during a defined window), and may follow one-step or two-step processes. Awards, if made, will take the form of procurement contracts or Other Transaction Agreements (OTAs) for prototyping, follow-on production, or experimental purposes, with eligibility open to small businesses, traditional and non-traditional defense contractors, and research institutions. OTA awards require resource-sharing commitments and participation by nontraditional contractors, small businesses, or third-party funding. Proposals must not include classified information unless explicitly directed by a classified Topic Call, which may require SECRET or higher clearances and approved secure facilities. Data rights are anticipated to include Government Purpose Rights for technical data and software, with specific terms negotiated per call. All submissions must reference the BAA number 26-S-1358 and be aligned with the specified Areas of Interest in each Topic Call. Interested parties must actively monitor SAM.gov and IC-ARC for updates, as Topic Calls may be issued throughout the BAA’s open period—initially one year, extendable annually—and any associated costs for proposal development are considered indirect, not chargeable to resulting contracts.

Research and Development in Nanotechnology

POSTED

about 2 months ago

DEADLINE

Foundational Technologies Directorate (RE) Multiple Authority Announcement (MAA)

Solicitation # FA2394-24-R-B003

The Air Force Research Laboratory’s Foundational Technologies Directorate (RE) is executing a Multiple Authority Announcement (MAA) under solicitation FA2394-24-R-B003 to establish a flexible contracting mechanism for advancing science and technology from basic research through technology maturation and transition. The effort is centered in Dayton, Ohio, and is designed to support a broad spectrum of technical objectives including aerospace systems, energy efficiency, and digital engineering. Proposals must be submitted in two distinct volumes—Technical/Management and Cost/Business—with the Technical/Management volume requiring a detailed Statement of Work that aligns with the Statement of Objectives and is eligible for direct contract incorporation. Submission is required electronically via Grants.gov, though the solicitation accommodates PDFs for signed certifications. Proposals must remain valid for 180 days, adhere to strict formatting guidelines (10-point Arial, double-spaced, 1-inch margins), and comply with detailed page limits that vary per solicitation, with the SOW treated separately from page counts. Offerors must include resumes and other supporting documentation, though these are not counted against the main limit. The evaluation process prioritizes Technical Approach as the most significant factor, assessing innovation, understanding of scope, risk mitigation, and potential for transition to operational use, followed by Cost/Price realism. The award will be made using a trade-off approach, not LPTA, emphasizing scientific and technical excellence with funding availability as a final determinant. Contractual compliance mandates full adherence to data rights regulations under DFARS 252.227-7013, 7014, and 7017, requiring clear identification of technical data developed with private funds and restrictions on use, release, or disclosure. Offerors must also certify their UEI and CAGE code via SAM.gov, declare size status and socioeconomic classifications, disclose foreign ownership, and comply with NDAA FY2021 Section 223(a) requirements by revealing key personnel funding and external commitments. Special provisions include stringent export control adherence under ITAR and EAR with DD Form 2345 compliance, organizational conflict of interest mitigation through personnel disclosures and Associate Contractor Agreements, and potential compliance with subcontracting plans under FAR 19.7. Payment, accounting, and contracting officer contact details are solicitation-specific and not standardized. Packaging, marking, and bar-coding standards are not prescribed, but restrictive, classification, and export control markings are required per DD Form 254 and

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 2 months ago

DEADLINE

Technology Transition & Commercialization PlanningThis contract focuses on supporting the transition of research outcomes into practical operational or commercial applications by providing comprehensive transition planning, engaging relevant stakeholders, and conducting pathway analysis. The work involves leveraging mechanisms such as Small Business Innovation Research (SBIR), Cooperative Research and Development Agreements (CRADA), or Other Transaction (OT) agreements to facilitate the movement of technology from research to real-world use. The contract is categorized under NAICS code 541611, which pertains to administrative management and general management consulting services. Issued by the Department of the Air Force under the Department of Defense, this subcontract targets activities based in Dayton. While specific set-aside designations or organization types are not specified, the contract plays a critical role in bridging the gap between research and deployment by ensuring effective planning and coordination among stakeholders. The effort is aligned with enhancing the practical implementation of innovations arising from government-funded research programs.

Administrative Management and General Management Consulting Services

POSTED

about 2 months ago

DEADLINE

Hardware Fabrication & Prototyping ServicesThis contract, titled "Hardware Fabrication & Prototyping Services," involves providing precision machining, additive manufacturing, and assembly services to create physical prototypes and test articles based on engineering designs. The services aim to support the development phase by producing accurate and functional hardware components necessary for testing and evaluation. Issued by the Department of the Air Force under the Department of Defense, the subcontract focuses on activities classified under NAICS code 332999. The work will be performed in Dayton, with an emphasis on delivering high-quality, precise fabrication to meet the Air Force's prototyping requirements. Although specific details such as solicitation number and contact points are not provided, the contract underscores the importance of advanced manufacturing capabilities in defense-related research and development projects.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 months ago

DEADLINE