Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Interior Finishes & Specialties

Active

Federal

Response Deadline10/30/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Interior Finishes and Specialties, involves providing specialized installation services for prime contractors on USACE projects located at Tinker Air Force Base. The scope of work focuses on delivering finished interior spaces ready for occupancy, specifically targeting infant, toddler, and pre-school activity rooms. Key deliverables include the installation of child-safe flooring, wall finishes, and room-specific specialty equipment. Managed by the Department of Defense under the W076 Endist Tulsa agency, the project falls under NAICS code 238390. The solicitation was posted on September 4, 2026, with a response deadline set for October 30, 2026, at 8:00 PM.

General Info

Interior finishes subcontract for child-safe rooms at Tinker AFB, deadline October 30, 2026.

Agency

Department Of Defense → W076 Endist Tulsa

NAICS

238390 - Other Building Finishing Contractors

Place of Performance

OK

Set-Aside

NONE

Documents

This scope was carved out of W912BV26RA016.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Child Development Center (CDC), Tinker Air Force Base, Oklahoma

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 4

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 08:00:00 PM UTCin about 17 hours

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W076 Endist Tulsa

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W076 Endist Tulsa

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs flooring, painting, and specialty equipment for prime contractors on USACE projects at Tinker Air Force Base. Installs child-safe flooring, wall finishes, and room-specific specialties for infant, toddler, and pre-school activity rooms. Delivers finished interior spaces ready for occupancy.

Similar Contracts

Same NAICS industry code

Sealants and Caulking

Jones County Board of Commissioners

POSTED

about 9 hours ago

DEADLINE

in about 2 months

Interior Finishes & ADA Accessories

DAS Procurement

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Architectural Specialties Installation

DAS Procurement

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Fuel Tank & Piping Corrosion Remediation and CoatingThis subcontract opportunity, titled Fuel Tank and Piping Corrosion Remediation and Coating, involves providing specialized corrosion removal and industrial coating services for US Coast Guard fuel system projects at Station Sand Key in Clearwater Beach. The scope of work includes treating and removing corrosion from diesel and regular unleaded tanks, spill containment units, and associated piping. Additionally, the contractor is responsible for applying environmentally safe industrial paint and ensuring all tanks are labeled in accordance with local, state, and county regulations to deliver fully remediated and compliant fuel systems. Managed by the Department of Homeland Security under Base Miami Beach, this project is designated as a total Small Business Set Aside under NAICS code 238390. The solicitation was posted on October 29, 2026, with a response deadline of November 13, 2026. The selected subcontractor will work alongside prime contractors to ensure all fuel storage and transport infrastructure is corrosion-free and properly coated.

Base Miami Beach

POSTED

about 15 hours ago

DEADLINE

Fire Stopping, Fire Doors & Associated Services

Solicitation # UKRI-6028

UK Research and Innovation (UKRI) has issued solicitation UKRI-6028 for the provision of fire stopping, fire doors, and associated fire-prevention services within the United Kingdom. The contract is estimated to run for three years and one day, from January 11, 2027, to January 11, 2030. The total estimated value of the contract is 7,000,000 GBP excluding VAT, or 8,400,000 GBP including VAT. This opportunity is noted as being particularly suitable for small and medium-sized enterprises. The procurement will follow an open procedure using a Most Economically Advantageous Tender approach, with the award based on a weighted evaluation of 70 percent for quality and 30 percent for price. Interested parties must submit their proposals in English via the Atamis eSourcing platform by the deadline of November 30, 2026, at 12:00 pm. All inquiries and submissions are managed through the UKRI procurement office.

UK Research & Innovation (UKRI)

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Specialized Equipment / Toilet Compartments & Accessories InstallationThis subcontract involves the installation of specialized equipment and toilet compartments for prime contractors working on Alhambra Unified School District facility projects in Alhambra, California. The selected contractor is responsible for providing and installing complete assemblies in accordance with CSI Section 10 43 50 and all manufacturer recommendations to ensure the equipment is fully functional upon delivery. To be eligible for this project, contractors must hold a valid contractor's license and undergo a mandatory criminal background investigation and fingerprinting process to gain access to school sites. Interested parties must submit their responses by November 17, 2026.

Alhambra Unified School District

POSTED

about 18 hours ago

DEADLINE

Laboratory Casework & SpecialtiesThis subcontract opportunity is for the supply and installation of wood laboratory casework and custodial accessories for prime contractors working on University of California, San Diego facility projects. The scope of work specifically involves the delivery and installation of specialized lab cabinetry, workstations, and related accessories within the San Diego area. The project is categorized under NAICS code 238390. Interested parties must submit their responses by the deadline of November 18, 2026. The performance of the contract will take place in San Diego, California, specifically within the 92037 zip code.

University of California, San Diego

POSTED

about 19 hours ago

DEADLINE

Toilet Compartments & AccessoriesThis subcontract for the Wave Waterpark Restroom Remodel Project in Vista, California, involves the supply and installation of toilet partitions, urinal screens, shower and changing curtains, and various bathroom accessories. The selected contractor will be responsible for performing field-verified layouts and installing rods, hooks, and ADA-compliant grab bars and seats in strict accordance with CBC 11B-604.8 standards. Managed under NAICS code 238390 for the City of Vista, the contract requires the delivery of all fully installed partitions and accessories to the prime contractor. Interested parties must submit their responses by the deadline of November 17, 2026.

POSTED

about 20 hours ago

DEADLINE

Joint Sealant and Caulking ServicesThis subcontract for Joint Sealant and Caulking Services involves providing professional sealing and caulking for prime contractors working on School District 71 Comox Valley facility projects in Canada. The scope of work includes surface preparation, the installation of backer rods, and the application of CGSB Qualified sealants, such as Dowsil, Tremco, and G.E., specifically for facade joints and window perimeters to ensure watertight results. Qualified providers must hold certification from the CGSB Qualification Board. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026. This opportunity falls under NAICS code 238390 and is associated with the Province of British Columbia.

School District 71 Comox Valley

POSTED

DEADLINE

Joint Sealant ProtectionThis subcontract for Joint Sealant Protection involves providing professional sealing services for building joints at the Well No. 17 Pump Station project in Nantucket, Massachusetts. The scope of work requires the delivery of watertight seals across various interfaces, specifically focusing on concrete-to-concrete, masonry-to-concrete, steel-to-concrete, and steel-to-masonry joints. Managed under the Nantucket Water Department with NAICS code 238390, the opportunity was posted on October 28, 2026. Interested parties must submit their responses by the deadline of December 9, 2026.

Nantucket Water Department

POSTED

DEADLINE

in about 1 month

Floor Refinishing and CoatingThis subcontract for Floor Refinishing and Coating involves providing professional flooring services for prime contractors on City of Markham facility projects, specifically located at the Varley Art Gallery and McKay Art Centre in Canada. The scope of work includes comprehensive surface preparation through stripping, sanding, or grinding, followed by the application of sealants, stains, and protective coatings to deliver fully refinished surfaces. The contractor is expected to utilize industrial-grade equipment, including floor sanders, buffers, and dust containment systems. The opportunity was posted on October 28, 2026, with a response deadline of November 18, 2026. Classified under NAICS code 238390, this project is managed by the City of Markham. Interested parties can find further details through the official bids and tenders portal.

City of Markham

POSTED

DEADLINE

Firestopping and SealantsThis subcontract for Firestopping and Sealants involves the installation of fire-resistance-rated seals at wall and floor penetrations for prime contractors working on Massachusetts Department of Developmental Services facility projects. The scope of work requires the application of sealants, pillows, and collars in accordance with Intertek Group and FM Global design numbers, adhering to ASTM E 814 or UL 1479 standards. Additionally, the contractor is responsible for providing Engineering Judgments for any modified systems to ensure all project penetrations receive certified fire-rated seals. The project is categorized under NAICS code 238390 and is located in Boston, Massachusetts. Interested parties must submit their responses by the deadline of November 18, 2026.

Department of Developmental Services

POSTED

DEADLINE

More opportunities from Department Of Defense → W076 Endist Tulsa

Same awarding agency

Power Line Clearing Services (Lady Bird Landing)This subcontract for Power Line Clearing Services at Lady Bird Landing involves specialized vegetation clearing and limb removal for the USACE Eufaula Lake Project. The selected contractor will be responsible for delivering a cleared 30-foot wide corridor across 1,800 yards, ensuring all trees and limbs are removed within 15 feet of either side of active power lines. Technical requirements include cutting trees no higher than 4 inches above the ground and staging debris in piles with a maximum height of 8 feet. The project is a total Small Business Set Aside under NAICS code 238990, managed by the Department of Defense through the W076 Endist Tulsa. To be eligible, contractors must possess utility line clearing certification and utilize specialized pruning equipment. The performance location is in zip code 74462, with a response deadline set for November 20, 2026.

All Other Specialty Trade Contractors

POSTED

about 15 hours ago

DEADLINE

Dead Tree Felling Services (Belle Starr and Hwy 9 Campgrounds)This subcontract for the Department of Defense, managed by the W076 Endist Tulsa, involves dead tree felling services for the USACE Eufaula Lake Project. The scope of work requires the felling of approximately 400 dead trees across 58.8 acres located at Belle Starr Park and Hwy 9 Landing Park. Contractors must cut trees no higher than 4 inches above the ground and stage the timber in piles with a maximum height of 8 feet and a diameter of 15 feet using chainsaws and specialized felling equipment. The opportunity is designated as a Total Small Business Set Aside under NAICS code 115310. Performance will take place in zip code 74462, with the primary objective of delivering cleared designated areas with timber staged according to project specifications. The response deadline for this requirement is November 20, 2026.

Support Activities for Forestry

POSTED

about 15 hours ago

DEADLINE

Powerline Tree Clearing and Dead Tree Felling Services

Solicitation # W912BV27QA004

The U.S. Army Corps of Engineers, Southwestern Division, Tulsa District, is soliciting quotes for powerline tree clearing and dead tree felling services at Eufaula Lake in Stigler, Oklahoma, under solicitation W912BV27QA004. This is a new requirement issued as a 100 percent small business set-aside under NAICS code 561730. The resulting contract will be a firm-fixed price award based on the most advantageous offer, considering price, past performance, and conformance with subcontracting regulations. Quotes are due by 2:00 PM CST on November 20, 2026, and must be submitted via the PIEE solicitation module. The anticipated award date is approximately December 1, 2026. The scope of work is divided into a base requirement for dead tree felling and three optional clearing projects at Belle Starr Park West Loop, Hwy 9 Landing Park, and Lady Bird Landing. Performance periods range from 30 to 60 days from the date of award. To be eligible, offerors must maintain active registration in the System for Award Management and provide a NIST score in the Supplier Performance Risk System. Work must comply with EM 385-1-1 (2024) safety standards and federal and state environmental requirements. Evaluation will focus on the lowest price among acceptable offers and a satisfactory or acceptable past performance rating.

Landscaping Services

POSTED

about 15 hours ago

DEADLINE

Webbers Falls Excitation System Replacements

Solicitation # W912BV26RA029

Solicitation W912BV26RA029 is a Request for Proposal issued by the Department of Defense, specifically the US Army Corps of Engineers Tulsa District, for the design and installation of three excitation systems at the Webbers Falls Powerhouse in Oklahoma. The project scope includes the demolition of existing equipment and the supply of three identical full inverting potential source rectifier exciters, each featuring a rectifier assembly, a power potential transformer, and microprocessor digital controllers capable of operating in high humidity and temperatures up to 40 degrees Celsius. Key deliverables include the hardware, comprehensive O&M data packages, field test reports, spare parts, and training for maintenance personnel. The performance period is 300 calendar days from the date of the notice to proceed. This is a partial small business set-aside under NAICS code 237990. Proposals are evaluated on an acceptable or unacceptable basis across three factors: past performance (requiring experience in specific categories within the last five years), a detailed work plan and schedule, and minimum small business participation percentages, including 16 percent aggregate and 11 percent for small disadvantaged businesses. The contract requires strict adherence to electrical and safety standards such as NFPA 70 and IEEE C2, as well as military standards for shipment and storage. Additionally, the prime contractor must possess a Facility Clearance, and personnel must comply with DoD 8570.01-M training and cybersecurity requirements. Payment requests are to be processed electronically via Wide Area WorkFlow.

Other Heavy and Civil Engineering Construction

POSTED

about 15 hours ago

DEADLINE

Electrical Engineering and As-Built DraftingThis subcontract opportunity, titled Electrical Engineering and As-Built Drafting, is issued by the Department of Defense for the USACE Tulsa District. The project focuses on providing prime contractors with final record drawings and comprehensive technical documentation for facility projects. The primary scope of work involves drafting final record drawings that accurately reflect field changes made to electrical infrastructure. The contract is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must submit their responses by the deadline of December 3, 2026. The ultimate goal of the engagement is the successful delivery of finalized Record Drawings to ensure accurate facility documentation.

Engineering Services

POSTED

DEADLINE

in about 1 month

Electrical Testing and CommissioningThis subcontract opportunity, titled Electrical Testing and Commissioning, is issued by the Department of Defense for the USACE Tulsa District. The selected contractor will provide independent testing and verification of electrical systems for prime contractors, specifically focusing on the commissioning of transformers and switchgear. Key responsibilities include managing outage sequencing and ensuring all work adheres to NETA ATS and IEEE 1248 standards, culminating in the delivery of final system verification and commissioning reports. The project is designated as a total Small Business Set Aside under NAICS code 238210. Interested parties must submit their responses by the deadline of December 3, 2026. This engagement is critical for ensuring the operational integrity and safety of electrical infrastructure within the Tulsa District facility projects.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Specialized Electrical Installation and CablingThis small business set-aside subcontract involves specialized electrical installation and cabling for the Department of Defense under the USACE Tulsa District. The selected contractor will be responsible for installing medium-voltage cables, terminations, and grounding systems for prime contractors on facility projects. Specific technical requirements include the installation of 15kV 2,750 kcmil solid dielectric cables, potheads, and cable trays in strict accordance with NFPA 70 and NECA 101 standards. To qualify for this project, the contractor must hold NETA ATS certification to ensure the delivery of a fully installed and terminated 15kV cabling and grounding system. The opportunity is categorized under NAICS code 238210, with a response deadline set for December 3, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Low-Voltage Switchgear and Grounding EquipmentThis small business set-aside subcontract involves the manufacture and supply of low-voltage switchgear and grounding equipment for prime contractors working on USACE Tulsa District facility projects. The scope of work specifically includes the production of 480VAC switchgear equipped with relays and metering, as well as high-resistance grounding cabinets designed for diesel generators. All equipment must be manufactured in strict compliance with ANSI C12.1 and C39.1 standards. Managed under the Department of Defense for the W076 Endist Tulsa agency, the contract falls under NAICS code 238210. Interested parties must adhere to the response deadline of December 3, 2026. The primary objective is the successful delivery of specialized electrical infrastructure to support critical facility operations within the Tulsa District.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Dry-Type Transformer ManufacturingThis small business set-aside subcontract involves the manufacturing and delivery of two 13,800/480VAC station service transformers for prime contractors working on USACE Tulsa District facility projects. The equipment must be produced in compliance with IEEE C57.12.01 Table 13 and must feature cast bronze or stainless nameplates along with temperature monitors equipped with programmable Form C contacts. The project is managed under the Department of Defense through the W076 Endist Tulsa agency. Interested parties should note that the response deadline for this opportunity is December 3, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 1 month

Medium-Voltage Switchgear ManufacturingThis subcontract opportunity is for the manufacturing and delivery of 15kV medium-voltage switchgear lineups intended for prime contractors working on USACE Tulsa District facility projects. The scope of work includes the production of the switchgear along with all necessary bus modifications and associated control cables. All deliverables must strictly adhere to IEEE and ANSI standards to ensure technical compliance and safety. Managed under the Department of Defense for the W076 Endist Tulsa agency, this procurement is designated as a total Small Business Set Aside under NAICS code 335313. Interested parties must submit their responses by the deadline of December 3, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

in about 1 month

Concrete Demolition and Foundation RepairThis subcontract opportunity is for concrete demolition and foundation repair services supporting prime contractors on USACE Tulsa District facility projects. The scope of work includes the demolition of existing pads, the repair of concrete surfaces, and the construction of minor equipment foundations. All deliverables must be level, properly cured, and strictly adhere to the seismic withstand requirements specified in Section 03 60 00.01. Managed by the Department of Defense under the W076 Endist Tulsa agency, this project is designated as a total Small Business Set Aside under NAICS code 238110. Interested parties must submit their responses by the deadline of December 3, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 1 month

Asbestos and Hazardous Material AbatementThis small business set-aside subcontract, titled Asbestos and Hazardous Material Abatement, involves the removal and legal disposal of hazardous materials for prime contractors working on USACE Tulsa District facility projects. The scope of work specifically focuses on the removal of asbestos cable trays and potheads within the switchyard, requiring the contractor to hold a certified asbestos abatement license. The selected contractor must ensure strict adherence to EPA, DOT, and OSHA labeling standards for all hazardous waste. Final deliverables include the provision of certified disposal manifests and the delivery of a clean project site. This opportunity is managed under the Department of Defense for the W076 Endist Tulsa agency.

Remediation Services

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Specialties & Furnishings

Office Of Construction & Facilities Management (36C10F)

POSTED

about 2 months ago

CLOSED

about 2 months ago

Loading Ramp Handrail Installation

W6QK Acc-Ri-Picatinny

POSTED

about 2 months ago

CLOSED

about 2 months ago

Interpretive Signage Fabrication and Installation

W2SD Endist New York

POSTED

about 2 months ago

CLOSED

about 2 months ago

Firestopping & Joint Sealants

Network Contract Office 23 (36C263)

POSTED

about 2 months ago

CLOSED

Casework & Countertops

244-NETWORK Contract Office 4 (36C244)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Joint Sealant Application

257-NETWORK Contract Office 17 (36C257)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Manufactured Canopies (Specialties)

W7N8 Uspfo Activity Wiang 115

POSTED

about 2 months ago

CLOSED

about 2 months ago

Joint Sealant Specialist

FA4897 366 Cons Pkp

POSTED

about 2 months ago

CLOSED

about 1 month ago

General Interior Finishing & Renovation

W076 Endist Middle Eas(provis)

POSTED

about 2 months ago

CLOSED

about 1 month ago

Telecommunications & Electronic Safety

FA8751 Afrl Riko

POSTED

about 2 months ago

CLOSED

Window Film and Blind Installation Services

FA2517 21 Cons Bldg 350

POSTED

about 2 months ago

CLOSED

about 1 month ago

Joint Sealant Specialist

260-NETWORK Contract Office 20 (36C260)

POSTED

about 2 months ago

CLOSED

about 2 months ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS