Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Interior Fit-Out and Finishes

Active

State & Local

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Interior Fit-Out and Finishes involves performing interior construction and finishing services for the Massachusetts State College Building Authority. The project focuses on a residence hall conversion at Framingham State University, where the contractor is responsible for framing and installing walls to create 32 self-contained apartments. Additionally, the scope of work includes the installation of flooring, paint, and ceiling finishes within the individual units and common amenity spaces to ensure the interiors are ready for occupancy. The opportunity was posted on October 14, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 238310, the work is performed in Boston, Massachusetts. This contract is designed for a subcontractor to support prime contractors in delivering high-quality interior spaces for the state college facility.

General Info

Interior fit-out and finishes for 32 apartments at Framingham State University, Boston.

Agency

MSCBA - Massachusetts State College Building Authority

NAICS

238310 - Drywall and Insulation Contractors

Place of Performance

Boston, MA, 02210, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-25-1369-MSCBA-MSCBA-134323.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

The RFQ/P is issued according to the Single Selection Method Procedures of the Authority, pursuant t

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMSCBA - Massachusetts State College Building Authority

ContactsNo contacts available

OfficeN/A

Organization / AgencyMSCBA - Massachusetts State College Building Authority

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs interior construction and finishing for prime contractors on Massachusetts State College Building Authority facility projects, here a residence hall conversion at Framingham State University. Frames and installs walls to create 32 self-contained apartments and installs flooring, paint, and ceiling finishes in units and amenity spaces. Delivers finished interior spaces ready for occupancy.

Similar Contracts

Same NAICS industry code

Interior Drywall and PaintingThis subcontract for Interior Drywall and Painting involves providing wall finishing and painting services for prime contractors on Conservation Halton facility projects. The scope of work requires finishing gypsum board to a Level 4 standard and performing necessary patching and repairs to all disturbed floors, walls, ceilings, and trim to ensure a seamless result. Additionally, the contractor is responsible for protecting all existing timber and architectural elements throughout the process to deliver high-quality, finished interior painted surfaces. The opportunity was posted on October 16, 2026, with a response deadline of October 30, 2026. Classified under NAICS code 238310, this project is managed by Conservation Halton. Interested parties can find further details through the official bids and tenders portal.

Conservation Halton

POSTED

about 17 hours ago

DEADLINE

Drywall and Cladding InstallationThis subcontract opportunity with the City of Grande Prairie involves the installation and repair of interior wall systems and exterior cladding. The selected contractor will be responsible for delivering finished walls and various cladding systems while working under prime contractors on city projects. Interested parties must hold a valid COR, COREL, or SECOR safety certification to be eligible. The solicitation was posted on October 16, 2026, and the deadline for responses is November 6, 2026.

City of Grande Prairie

POSTED

about 17 hours ago

DEADLINE

Ceiling Repair and Refresh

260-NETWORK Contract Office 20 (36C260)

POSTED

about 21 hours ago

DEADLINE

High-Impact Industrial Door Systems Supply and InstallationThis subcontract opportunity with Navfacsyscom Southeast under the Department of Defense involves the supply and installation of high-performance industrial door systems for federal facility projects in Jacksonville. The scope of work requires the provision of door assemblies that meet the 150 ft-lb impact test rating per ANSI A250.13-2014, along with the installation of dual ball-bearing carrier assemblies capable of supporting a 1,240 lbs dynamic load. To ensure operational integrity, the contractor must perform ANSI/UL 1784 air leakage testing and provide certified test results upon delivery. Interested parties must respond by October 30, 2026, for this project categorized under NAICS code 238310.

Navfacsyscom Southeast

POSTED

about 21 hours ago

DEADLINE

Interior Finish Products SupplierThis subcontract opportunity, managed by W2SN Endist Japan under the Department of Defense, seeks a supplier for interior finish products to support prime contractors on US Army Corps of Engineers projects at Kadena Air Base, Japan. The scope of work involves the provision and delivery of flooring, wall treatments, and ceiling systems that satisfy both functional and aesthetic specifications. A critical requirement for this contract is that all supplied materials must strictly comply with Japanese Industrial Standards. Interested parties should note that the response deadline is October 30, 2026, and the project falls under NAICS code 238310.

W2SN Endist Japan

POSTED

about 21 hours ago

DEADLINE

Commercial Flooring and TilingThis subcontract opportunity involves the supply and installation of commercial flooring and wall tiling for facility projects at the University of California, Santa Barbara. The selected contractor will work under prime contractors to install non-slip commercial flooring and wall tiles specifically within lobby areas and restroom suites, ensuring all finished surfaces are fully waterproofed. The project is located in Santa Barbara, California, under NAICS code 238310. Interested parties must submit their responses by the deadline of October 21, 2026, following the posting date of October 16, 2026.

University of California, Santa Barbara

POSTED

DEADLINE

Thermal and Acoustic InsulationThis subcontract agreement involves the supply and installation of thermal and acoustic insulation for facility projects at the University of California, San Diego. The scope of work focuses on installing insulation within new wall partitions and cavities specifically for Classroom 1-230 and electrical rooms located in the basement, L1, and PH levels. All work must be performed in accordance with the provided contract documents. Qualified bidders must possess a valid California Contractor's license and maintain registration with the Department of Industrial Relations. The project is located in San Diego, California, with a response deadline set for November 3, 2026.

UNIVERSITY OF CALIFORNIA, SAN DIEGO

POSTED

DEADLINE

Metal Framing and Seismic Retrofit BracingThis subcontract opportunity involves the installation of metal framing and seismic bracing for facility projects at the University of California, San Diego. The scope of work includes furnishing and installing framing for new walls in classrooms and electrical rooms, as well as implementing retrofit bracing for partial height walls and suspended ceilings in accordance with structural details. All structural framing must be HCAi NPC-4D Level 2 compliant. Qualified bidders must possess a valid California Contractor's license and be registered with the Department of Industrial Relations. The project is located in San Diego, California, and responses are due by November 3, 2026.

UNIVERSITY OF CALIFORNIA, SAN DIEGO

POSTED

DEADLINE

Drywall Installation and RepairThis subcontract involves drywall installation and repair services for facility projects at the University of California, San Diego. The scope of work includes patching drywall openings for MEP access and installing new drywall in Classroom 1-230 as well as electrical rooms located in the basement, L1, and PH. The contractor is responsible for ensuring all finishes and patches match existing surfaces to deliver completed walls and ceiling closures. Eligible bidders must possess a valid California Contractor's license and maintain DIR registration. The project is located in San Diego, California, with a response deadline set for November 3, 2026.

UNIVERSITY OF CALIFORNIA, SAN DIEGO

POSTED

DEADLINE

5787 ECMC East Tower Non-Structural Performance Category 4D – Bid Package 09.02 - Framing, Drywall & Insulation

Solicitation # 20261015027

The University of California, San Diego, is soliciting bids for the 5787 ECMC East Tower Non-Structural Performance Category 4D project, specifically Bid Package 09.02 for Framing, Drywall, and Insulation. The primary objective is to achieve HCAi NPC-4D Level 2 compliance through the installation of seismic bracing and end-of-line restraints for fire sprinkler piping in the Rehabilitation Hospital and Connecting Bridge. The scope of work includes repairing and patching drywall openings for MEP subcontractor access, installing new framing, drywall, and insulation for walls in the basement, L1, and PH electrical rooms as well as Classroom 1-230, and implementing retrofit framing improvements for suspended ceilings and partial height walls according to structural details. To be eligible for award, bidders must be responsive, responsible, and registered with the Department of Industrial Relations at the time of the bid. Mandatory requirements include attending the full pre-bid conference and submitting a bid security via bid bond or certified check. Bids must be uploaded as a single PDF through the Trimble Unity Construct Bidding Module by November 3, 2026. The project emphasizes the use of California State General Prevailing Wage Determination 2026-1 and requires a commitment to increasing the participation of small business enterprises and disabled veteran business enterprises through a required small business outreach plan. Coordination with hospital operations is critical to ensure the maintenance of life safety systems throughout construction.

UNIVERSITY OF CALIFORNIA, SAN DIEGO

POSTED

DEADLINE

Bridge Underside Plaster PatchingThis subcontract for the UC San Diego Medical Center involves performing specialized plaster patching and finish work at the underside of a connecting bridge. The primary objective is to restore surfaces following the installation of seismic braces, ensuring a professional finish is delivered to the project site in San Diego. Qualified contractors must possess a C-35 Plastering license and maintain valid DIR registration to be eligible. The solicitation was posted on October 16, 2026, with a response deadline set for October 30, 2026.

UC San Diego Medical Center

POSTED

DEADLINE

Gypsum Board & DrywallThis subcontract opportunity for Johnson County Community College involves the installation of gypsum board assemblies for facility projects. The selected contractor will work under prime contractors to perform the hanging, taping, and finishing of drywall specifically for restroom walls and ceilings, ensuring all surfaces are completed and ready for subsequent tile or paint application. The project falls under NAICS code 238310 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of November 3, 2026.

Johnson County Community College

POSTED

DEADLINE

More opportunities from MSCBA - Massachusetts State College Building Authority

Same awarding agency

Kitchen and Bath Cabinetry SupplyThis subcontract agreement involves the supply of kitchen and bath cabinetry for a residence hall conversion project at Framingham State University, managed by the Massachusetts State College Building Authority. The selected provider will be responsible for the fabrication and delivery of kitchen cabinets, bathroom vanities, and countertops specifically for 32 new apartment units, ensuring all specified millwork is delivered directly to the project site. The solicitation was posted on October 14, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 337110, the contract is designated for prime contractors operating within the Massachusetts state college building framework, with the place of performance centered in the Boston area.

Wood Kitchen Cabinet and Countertop Manufacturing

POSTED

DEADLINE

Life Safety and Fire ProtectionThis subcontract for Life Safety and Fire Protection involves performing critical system upgrades for a residence hall conversion at Framingham State University under the Massachusetts State College Building Authority. The scope of work includes modifying fire alarm systems, upgrading or installing sprinkler systems to fit new apartment layouts, and installing smoke and carbon monoxide detectors within individual units to ensure a fully certified and inspected life safety system. The project is categorized under NAICS code 238220 and is based in Boston, Massachusetts. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline set for November 4, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Systems UpgradeThis subcontract for Electrical Systems Upgrade involves performing electrical upgrades for prime contractors on a Massachusetts State College Building Authority project. The work is centered on a residence hall conversion at Framingham State University, where the contractor will upgrade electrical panels and distribution to support 32 separate apartment units. The scope of work includes the installation of wiring, lighting, and power outlets for living areas, kitchens, and bathrooms to ensure a code-compliant system for both individual apartments and common areas. The project falls under NAICS code 238210 and is associated with the Massachusetts State College Building Authority. The solicitation was posted on October 14, 2026, with a response deadline of November 4, 2026. While the performance location is listed in Boston, the specific project site is Framingham State University.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Plumbing and Wet Utilities InstallationThis subcontract for Plumbing and Wet Utilities Installation involves performing specialized plumbing work for prime contractors on a Massachusetts State College Building Authority project. The scope of work is centered on a residence hall conversion at Framingham State University, where the contractor will install new bathrooms and kitchens for 32 self-contained apartments. This includes performing both rough-in and finish plumbing for showers, toilets, and sinks, as well as upgrading existing infrastructure to support increased fixture density to ensure fully functional systems. The project is categorized under NAICS code 238220 and is associated with the Massachusetts State College Building Authority. Interested parties should note that the response deadline is November 4, 2026, with the performance of work located in the Boston area.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

The RFQ/P is issued according to the Single Selection Method Procedures of the Authority, pursuant t

Solicitation # BD-25-1369-MSCBA-MSCBA-134323

The Massachusetts State College Building Authority is soliciting joint proposals from Architect and Construction Management teams for Project No. FRA-1099-25, the Linsley Hall Repurposing at Framingham State University. The project involves transforming Linsley Hall from a residence hall into approximately 32 self-contained apartments with new kitchens and bathrooms to serve as on-campus housing for faculty and staff. The scope of work includes renovations to amenity spaces and necessary upgrades to electrical, plumbing, and life safety systems, with an estimated construction cost of 7,000,000 dollars. This solicitation, numbered BD-25-1369-MSCBA-MSCBA-134323, follows the Single Selection Method Procedures pursuant to Section 30 of Chapter 193 of the Acts of 2004. The Authority will only accept joint statements of qualifications and proposals from teams that have a proven history of working together on renovation projects of similar scope, complexity, schedule, and budget. Responses are due by 12:00 PM on November 4, 2026. The primary point of contact for this procurement is Jadea Simmons.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS