Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

INTERRUPTER, GROUND

Awarded

SPE7M0-26-T-062AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one ground interrupter under part number 5925-01-482-7651. The contract requires delivery within five days after the order is placed and specifies that the place of performance is in Marana, Arizona. The agreement incorporates strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional use in specific systems as defined by NAVSEA. Additionally, any alternate offeror must provide a complete data package for both the approved and alternate parts.

General Info

DoD procurement of one ground interrupter for delivery in Marana, Arizona.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$148

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

FROMM ELECTRIC SUPPLY OF READING,

Award Issued Date

09/02/2026, 12:00:00 AM UTC

Documents

2

SPE7M0-26-T-062A Request for Quotations

rfq

High

SPE7M0-26-V-5482 Order for Supplies or Services

contract-document

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedAug 27

Solicitation

AwardedSep 2

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Audrey Acuna

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE7M026V5482 posted on DIBBS. Awardee: FROMM ELECTRIC SUPPLY OF READING, (CAGE 4N509) Total Contract Price: $148.00 Award Date: 09-02-2026 Solicitation: SPE7M0-26-T-062A Line items: - INTERRUPTER, GROUND (NSN/Part 5925014827651, PR 7018055050)

Similar Contracts

Same NAICS industry code

Supply of Specialized Cable Assembly (Glenair P/N 8071-1155)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Wiring Harness Fabrication and Assembly

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-27-T-5196

Solicitation SPE4A6-27-T-5196 is for the procurement of two special purpose electrical cable assemblies, identified by NSN 5995017271934 and part number 5496840-113. The requirement is managed by the DLA Weapons Support ASC Commodities Division with a required delivery date of July 31, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Key compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and compliance with the Buy American Act and Berry Amendment. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-27-T-5216

Solicitation SPE4A6-27-T-5216, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of two special cable assemblies (NSN 5995-01-675-5592), identified as critical application items with manufacturer part number Glenair, Inc. 06324 P/N 8071-1155. The requirement is categorized under NAICS code 335931. Delivery is required within 109 days after receipt of order, with a need ship date of February 14, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 certification and the safeguarding of covered defense information. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must comply with ASTM D3951 and MIL-STD-129, while quality inspection will follow MIL-STD-1916 or ASQ H1331 zero-based sampling plans. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and payment processing is required through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPRMM127QKA09

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and procurement of a power supply for the AN/UYK-43 computer set, specifically part of the PP-8099/UYK-43(V) power supply. The requirement is for the design represented by Cage Codes 90536 and 52088. Because the government cannot provide the Stable Base Master Phototools, the contractor is responsible for acquiring or developing the necessary artwork for manufacture. The contract mandates compliance with several military standards, including MIL-STD-130 for identification, MIL-STD-1686 for electrostatic discharge control, and MIL-STD-2000 for soldering. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability defined as full compliance with solicitation instructions and no exceptions to the terms. The government will utilize the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. Key administrative requirements include the electronic submission of invoices and receiving reports via PIEE-WAWF and the use of the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. If the offeror is not the original equipment manufacturer, they must identify the OEM's CAGE code and part number, as refurbished materials are not acceptable. Additionally, the contract incorporates various FAR and DFARS clauses, including requirements for Cybersecurity Maturity Model Certification (CMMC) and the transportation of supplies by sea.

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

61--POWER SUPPLY ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAHY

Solicitation N00104-26-Q-YAHY, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the teardown, evaluation, repair, and modification of two Power Supply Assemblies (NSN 6130-01-326-8686). The contract is DO certified for national defense under the Defense Priorities and Allocations System. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization from the OEM. Following the initial evaluation of the items, the contractor is required to submit a detailed cost proposal reflecting actual repair costs. The contractor must adhere to strict quality and technical standards, including MIL-STD-129 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is that all materials must be mercury-free to prevent contamination on submarines and surface ships. Inspection and acceptance will occur at the origin, and the contractor must maintain all inspection records for 365 days after final delivery. Payment will be processed electronically through Wide Area WorkFlow. The solicitation also mandates compliance with various federal regulations, including the Buy American Act, cybersecurity maturity model certification levels, and prohibitions on covered defense telecommunications equipment.

Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

POWER DISTRIBUTION-

Solicitation # SPRMM126QGF05

Solicitation SPRMM126QGF05, issued by DLA Mechanicsburg for NAVSUP Weapon System Support, is a small business small purchase for the manufacture and delivery of one Power Distribution unit. The requirement specifies the item must adhere to the design represented by Cage Code 38200 and reference number 148967-1, with the National Item Identification Number 200072349. Award will be determined using the Lowest Price Technically Acceptable (LPTA) criteria, where technical acceptability is based on compliance with solicitation instructions and the absence of exceptions to the terms. The government will also utilize the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. The contract requires delivery as soon as possible (ASAP) with FOB Origin terms. Inspection and acceptance will occur at the contractor's or subcontractor's plant. Strict quality and packaging standards are mandated, including physical identification per MIL-STD-130, preservation according to MIL-STD-2073-1, and adherence to ANSI/ESD S20.20-2021 for electrostatic discharge sensitive items. All invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead.

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPRMM126QGB20

This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture and provision of a power supply (NSN 7HH 6130-01-714-0090) based on the design represented by Cage Code 15055, reference number 8704449H01. The contract is a fixed-price requirement with delivery expected as soon as possible (ASAP), shipped FOB Destination to the DLA Distribution DDSD New Cumberland facility in Pennsylvania. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contractor is responsible for all inspection and acceptance at the origin and must maintain quality records for 365 days following final delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labels and ESD protection where applicable. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and refurbished materials or those produced via additive manufacturing are not acceptable.

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

Solicitation # N0038327QDA06

Solicitation N0038327QDA06 is a small business set-aside request for quotation issued by Navsup Weapon Systems Support Philadelphia for the repair of power supplies. This firm fixed price requirement is governed by FAR part 13 and is designated as a DO rated order under the Defense Priorities and Allocations System. The government intends to make a single award based on a best-value determination, prioritizing past performance as the primary evaluation factor via SPRS color ratings, with price serving as a secondary factor. The contract mandates a Repair Turnaround Time of 120 days from asset acceptance, with an induction expiration date set for 365 days after the award. Contractors must comply with SAE AS9100 Quality Management Systems and adhere to strict packaging and marking standards, including MIL-STD-2073-1 and MIL-STD-129. Payment and receiving reports are to be processed electronically through the Wide Area Workflow system. Key administrative requirements include compliance with the Buy American Act, NIST SP 800-171 for cybersecurity, and specific hazardous material labeling per OSHA standards. Final inspection and acceptance will occur at the contractor's location.

Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPRMM126QKJ06

This solicitation, issued by DLA Mechanicsburg under Emergency Acquisition authority, seeks the manufacture and delivery of a Power Supply (NSN 6130-01-617-3285). The procurement is designated as a small business small purchase and will be evaluated based on the Lowest Price Technically Acceptable (LPTA) criteria. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification, as the items are intended for use on submarines or surface ships. Offerors who are not the Original Equipment Manufacturer must provide the OEM's CAGE code and part number, and authorized distributors must submit proof of authorization on company letterhead. The contract mandates electronic processing of all invoices and receiving reports through PIEE-WAWF. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for electrostatic discharge protection and shipping levels based on destination. Inspection and acceptance will occur at the origin. Following two amendments, the final deadline for the receipt of offers is October 30, 2026, at 4:30 PM local time. Additionally, the contract incorporates cybersecurity requirements, including CMMC Level 1 self-certification and DFARS 252.204-7012 for safeguarding covered defense information.

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

Solicitation # N0010427QTA12

This solicitation, issued by the Navsup Weapon Systems Support Mech, is a request for quotations for the teardown, evaluation, repair, and potential modification of the PWA PROFIBUS (NSN 5935-01-662-2789). The government is seeking a single award from an authorized distributor or the original manufacturer, with an evaluation process that prioritizes past performance over price. The contract includes a primary requirement for one unit and an option quantity for up to 100 percent of the initial item. Key requirements include a specific Repair Turnaround Time (RTAT) of 229 days, though accelerated delivery is encouraged. The government also requires a quote for testing and evaluation fees in the event the asset is determined to be beyond economical repair. The contract mandates strict quality and safety standards, including Government Source Inspection (GSI) and compliance with MIL-STD-129 for marking and MIL-STD-2073-1 for packaging. A critical requirement is the prohibition of metallic mercury and mercury contamination, as the material is intended for use on submarines or surface ships. All freight is handled as FOB Origin, and payment will be processed via the Wide Area Workflow (WAWF) system. Additionally, the awardee must comply with cybersecurity maturity model certification requirements and provide detailed documentation for any design or part number changes.

Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

Solicitation # N0010427QNA14

Solicitation NO0014-27-Q-NA14, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the teardown, evaluation, repair, and modification of a power supply (NSN 6130-01-630-9299). The requirement is pursued under Emergency Acquisition Flexibilities and is designated as a DO-rated order for national defense. The resulting contract will be a bilateral Firm-Fixed Price agreement. Offerors must be authorized distributors of the original equipment manufacturer (OEM) and are required to provide a signed letter of authorization on OEM letterhead. Vendors must provide an estimated repair price and have 90 days after receiving the carcass to complete a teardown and evaluation and submit a final firm-fixed price quote. The scope of work includes all quality requirements for the repair process, with physical identification following MIL-STD-130 and packaging adhering to MIL-STD-2073. Delivery is required within 120 days, FOB Destination, to the DLA Distribution New Cumberland facility. Award will be based on a combination of past performance and price, with past performance weighted as more important. Technical acceptability requires full compliance with solicitation instructions and no exceptions to the terms. Administrative requirements include the use of Wide Area Workflow (WAWF) for invoicing and receiving reports, and compliance with cybersecurity maturity model certification level requirements.

Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Red Sealing Compound (NSN 8030015650423)

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

International Freight Forwarding (USA to Japan)

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Supply of Metal Sheet (NSN 9515-00-640-4204)

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 12 hours ago

DEADLINE

Steel Bar Supply (Hot Rolled/Forged)

Iron and Steel Forging

POSTED

about 12 hours ago

DEADLINE

Fluid Pressure Regulating Valve Manufacturing

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

Storage Battery Supplier

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7MC-27-T-0847

Solicitation SPE7MC-27-T-0847 is issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Hardware/Electrical for the procurement of five fluid pressure regulating valves, identified by NSN 4820-01-205-5209 and Johnson Controls part number V46BR2. The valves feature 1.5-inch connections with a maximum inlet pressure of 150 PSI and an adjustable outlet pressure range of 70-150 PSI. This is a Foreign Military Sales requirement for South Korea, with the final freight shipping destination located at the Naval Supply Center in Jinhae-gu, Changwon-si, Korea. Delivery is required within 20 days after the order, and the terms are FOB Origin. The manufacturing process may require casting or forging and specialized tooling. Compliance requires adherence to MIL-STD-129 for marking and RP001 for palletization and packaging, with a specified packing level of B. Inspection and acceptance are to occur at the point of origin per FAR 52.246-2. The contract incorporates various federal regulations, including the Buy American and Balance of Payments Program (DFARS 252.225-7001), cybersecurity reporting standards (DFARS 252.204-7012), and telecommunications equipment representations. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0125

Solicitation SPE8E4-27-T-0125 is a total small business set-aside issued by the Defense Logistics Agency for the procurement of 51 feet of M2 steel composite metal bar. The material is specified as hot rolled or forged, round, annealed, with a 6.000 inch diameter and a weight of 105.740 lb/ft. Deliveries must be in whole feet lengths between 6 and 12 feet. The contract requires a quantity variance of plus 10 percent and minus 0 percent, with a delivery window of 20 days after order. The final destination for the material is the Parts-Attach General Depot in Tainan City, Taiwan, with inspection and acceptance occurring at the point of origin. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory, and only listed suppliers are eligible for award. Technical quality is governed by ASTM A600-92A and QAP 13873, requiring a Certificate of Quality Compliance with every shipment. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and MIL-STD-163, with specific preservation and packing codes Z and ZZ as defined by ASTM A700. Detailed marking requirements include the DLA contract delivery order number, NSN, specification number, grade, alloy, and manufacturer details, applied via stamping or stenciling. Invoicing must be processed through the Wide Area WorkFlow system.

Iron and Steel Forging

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE8E4-27-Q-0016

Solicitation SPE8E4-27-Q-0016 is a firm fixed price procurement by the Defense Logistics Agency for one hot rolled, milled edge steel metal sheet (NSN 9515-00-640-4204). The material must meet specific dimensional requirements, with a minimum thickness of 0.1530 inches, a maximum thickness of 0.1670 inches, a width of 36 inches, and a length of 120 inches. The item is to be delivered FOB Destination to the Commander, SRF-JRMC Yokosuka Naval Base in Japan, with a required need ship date of May 22, 2026, and a delivery window of 30 days after order. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Technical compliance is critical, as sheets must conform to exact dimensions with no test coupons allowed, and material must be supplied in whole feet lengths. Required documentation includes a Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment and forwarded to the contracting officer. Packaging and marking must adhere to MIL-STD-129, ASTM A700, and MIL-STD-2073-1E, with mandatory continuous identification markings including the DLA contract delivery order number, NSN, and manufacturer details. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and electronic invoicing via the Wide Area WorkFlow (WAWF) system.

POSTED

about 12 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-27-T-0122

Solicitation SPE8ES-27-T-0122 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of red sealing compound, identified by NSN 8030-01-565-0423. The requirement is for four bottles of 10.00 milliliters each, with equivalent parts identified as Loctite Corp P/N 27121 or W.W. Grainger P/N 5A230. The item is classified as a Type I (Code H) material with a non-extendable shelf life of 12 months. Delivery is required within 20 days after the award, with a final required delivery date of October 20, 2026. The shipment is destined for the USS Harvey C Barnum Jr (DDG 124), with specific freight and parcel post addresses provided in Norfolk, Virginia, and an FPO address. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels per 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001 and IP025. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and DFARS cybersecurity standards. This procurement falls under NAICS code 325520 and may be eligible for automated award.

Adhesive Manufacturing

POSTED

about 12 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-Q-0108

Solicitation SPE7L7-27-Q-0108 is a firm fixed price requirement issued by the Defense Logistics Agency for the procurement of two lead acid gel cell storage batteries, part number B006 from Undersea Systems International, Inc. Each battery is designated as a critical application item with a non-extendable shelf life of six months. Delivery is required within 60 days after the date of order, with specific shipments destined for Explosive Ordnance Disposal Groups in San Diego, California, and Virginia Beach, Virginia. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the items are hazardous materials, they must comply with IP025 and RQ034 regulations, specifically prohibiting the intentional addition of mercury except where functionally required. Quality assurance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic preferences, and the safeguarding of covered defense information.

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE8ES-27-Q-0011

Solicitation SPE8ES-27-Q-0011 is a simplified acquisition issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one quart of blue enamel, identified by NSN 8010-01-143-3332. The procurement is a firm fixed price contract requiring the product to meet MPI #94 and FED-STD-595 chip code 25183 specifications. The item is classified as a Type II shelf-life item with a 24-month duration, and deliveries must ensure at least 85% of the shelf life remains upon receipt. The manufacturer must be approved on the Master Painters Institute Approved Products List at the time of award. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and HCS labels per 29 C.F.R. 1910.1200 prior to award. Packaging must comply with MIL-STD-2073-E and MIL-STD-129, utilizing round containers with multiple friction closures and bail type handles for gallon sizes. Delivery is set for 60 days after order, with FOB Origin terms, shipping via a freight forwarder in Pennsylvania to a final destination in Graf Ignatievo, Bulgaria. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with DFARS cybersecurity and safeguarding regulations for controlled unclassified information.

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS