Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

IT and Electrical Systems Installation (Non-Networked)

Open

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the installation of dedicated 120V electrical circuits, dimmable LED lighting equipped with occupancy sensors, HVAC systems, and fire protection systems specifically for a virtual weapons range room. It is categorized under IT and electrical systems installation, excluding networked services. The work is designated as a total small business set-aside under the SBA guidelines, aligning with NAICS code 238210, which covers electrical contractors and other wiring installation contractors. The contract is issued by the Department of Defense through the FA4830 23 Cons Cc agency and is to be performed at Fort Moore, with the zip code 31699. As a subcontract opportunity, it requires specialized installation services to enhance the operational environment of the virtual weapons range by ensuring proper electrical infrastructure, energy-efficient and responsive lighting, effective climate control, and adequate fire safety measures. This scope ensures compliance with safety and operational standards critical for the facility's intended use.

General Info

Installation of 120V circuits, LED lighting, HVAC, and fire systems for virtual weapons range at Fort Moore.

Agency

Department Of Defense → FA4830 23 Cons Cc

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

This scope was carved out of FA483026P0031.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Virtual Weapons Range

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 19

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4830 23 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA4830 23 Cons Cc

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of dedicated 120V electrical circuits, dimmable LED lighting with occupancy sensors, HVAC systems, and fire protection systems in the virtual weapons range room.

Similar Contracts

Same NAICS industry code

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is seeking proposals for the FRSMP277009/JLM-Lighting Phase 2 project under solicitation number WMATA-0000010972. This procurement falls under NAICS code 238210, which pertains to electrical contracting and related lighting services. The solicitation was posted on November 6, 2026, and requires all responses to be submitted by the deadline of December 2, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 4 hours ago

DEADLINE

Inland Empire Job Corps-Request for Quote Electrical Repairs

Solicitation # inland-empire-job-corps-request-quote-electrical-repairs

Management & Training Corporation (MTC) is seeking bids for a fee-for-service subcontract to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. The scope of work includes installing GFCI protection for multiple receptacles in the cafeteria, culinary arts kitchen, and academic education building, as well as repairing open-ground conditions in the dormitory and medical areas. Additionally, the contractor must install filler plates in panelboards, correct deficiencies for specific panelboards, update circuit directories, and provide permanent labeling for feeder conductors and distribution equipment. All work must comply with National Electrical Code (NEC), NFPA, and applicable federal, state, and local requirements. Bids are due by 3:00 PM PT on November 12, 2026, and must include a lump sum bid sheet, a completed supplier packet with Form W-9, three references for similar projects, and proof of insurance. Required insurance includes general liability with a minimum of $1,000,000 per occurrence and worker's compensation with employer's liability limits of at least $500,000. This opportunity is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone, with SBA certification required for the latter three. The contract is subject to Service Contract Labor Standards wage determinations and various FAR clauses regarding security, whistleblower rights, and the Buy American Act. Invoicing is to be submitted weekly or bi-weekly, and MTC will award the contract based on the best value.

Inland Empire Job Corps

POSTED

about 4 hours ago

DEADLINE

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a subcontracting opportunity for the installation of emergency shut-off switches on power tools at the Atterbury Job Corps Center in Edinburgh, Indiana, operated by Adams and Associates for the U.S. Department of Labor. The scope of work requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel with a 60A shunt-trip main circuit breaker in the Facility Engineering Storage/Maintenance Shop. All work must comply with OSHA, EPA, and FNC guidelines, as well as state and local building codes, with Indiana regulations prevailing if they are more stringent than federal requirements. The contractor must provide a one-year guarantee on workmanship and all necessary training and maintenance manuals upon completion. This is a small business set-aside solicitation requiring a single lump sum bid, though the lowest price does not guarantee an award. Evaluation is based on best value, weighted by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). A mandatory site visit was scheduled for November 10, 2026, with a proposal deadline of November 20, 2026. Qualified offerors must provide a valid Indiana Contractor's License, proof of specific automobile, general liability, and workers compensation insurance, and certify compliance with Davis-Bacon Act wage rates. Payment terms are Net 30. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a construction timeline, and a completed SF 1413.

Atterbury Job Corps. – Adams & Associates

POSTED

about 4 hours ago

DEADLINE

NC Global TransPark Phase 2

Solicitation # nc-global-transpark-phase-2

Ace Electric is seeking WMBE subcontractors for the NC Global TransPark Phase 2 project in North Carolina. The scope of work involves the addition of an airplane hangar and three support buildings, specifically requiring expertise in fire alarms, data, and security under NAICS code 238210. The project is scheduled to commence in the spring of 2027 with an estimated duration of 15 months. Interested parties should coordinate with Thomas Jeffords or Chris Mitchell to discuss bidding opportunities.

Ace Electric, Inc.

POSTED

about 4 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for transformer oil testing services to improve the efficiency, safety, and consistency of its transformer maintenance. The project focuses on three primary objectives: conducting condition assessments through visual and infrared thermographic inspections of energized transformers, installing standardized external oil sampling devices to enhance technician safety, and performing detailed oil testing analysis. All work must adhere to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards, with infrared inspections performed by ASNT Level 1 certified technicians or equivalent. Key deliverables include annotated inspection results, written condition reports for each asset, comprehensive standard operating procedures, and on-site training for up to 20 agency staff members. This is a fixed-pricing contract with a not-to-exceed total price, intended as a single award to the most capable and cost-effective offeror. Proposals are due by December 23, 2026, via PlanetBids and must include a detailed project approach, company profile, and three references from similar projects completed within the last five years. Evaluation criteria emphasize personnel experience, staffing plans, and the ability to meet the project timeline. The contract requires contractors to be registered with the Department of Industrial Relations for prevailing wage compliance and to provide certificates of insurance. Payments are made electronically via ACH, with an expedited payment protocol available for consultants who accept specific invoice reductions.

Inland Empire Utilities Agency

POSTED

about 4 hours ago

DEADLINE

in about 2 months

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Eastern Municipal Water District's Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility Project in California. The scope of work is divided into two major components, the San Jacinto Valley Advanced Water Purification Facility and Brine Ponds, with specific needs for low voltage systems, fiber optics, and electrical materials and supplies. Bids must be submitted by 2:00 PM on November 18th to be considered responsive, with a final deadline of November 19th. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must adhere to the AGC Master Labor Agreements and the terms of the prime contract. Minimum insurance requirements include 1 million dollars for General Liability per occurrence, 2 million dollars for Aggregate and Completed Operations, 5 million dollars for Excess Liability, 1 million dollars for Auto Liability, and 1 million dollars for Workers Compensation and Employer Liability. Submission of a bid constitutes acceptance of Axia's Standard Long Form Subcontract or Purchase Order. Non-SBE/DBE firms are encouraged to provide information regarding lower-tier SBE/DBE participation for evaluation.

POSTED

about 4 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project, with an estimated value between $25,000 and $100,000, requires a qualified electrical contractor to inventory, inspect, test, repair, and certify all emergency lighting systems in accordance with NFPA 101 (2024 Edition), NFPA 70, and OSHA regulations. Key deliverables include the restoration of systems to full operation, the application of durable tracking labels to fixtures, integration of maintenance requirements into the facility's Computerized Maintenance Management System, and the provision of hazardous material disposal certificates. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a signed bid form, a detailed cost breakout on company letterhead, and a completed supplier onboarding packet. For bids equal to or exceeding $25,000, contractors must provide a bid bond guarantee of 20% of the base bid, and the awarded contractor will be required to furnish performance and payment bonds from a surety with at least an A- rating. The contract is subject to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements under Executive Order 14026, and various FAR clauses regarding small business utilization, security, and whistleblower rights.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This procurement aims to enhance airport navigation infrastructure through the strategic installation of DME on the specified runway.

POSTED

about 4 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a diverse range of construction and repair services located in Louisiana. The scope of work encompasses electrical repairs and grounding system updates, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for this project is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as a small business set-aside, welcoming bids from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and primary inquiries should be directed to Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 4 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with the DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This opportunity is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by December 30, 2026.

Parsons Corporation

POSTED

about 4 hours ago

DEADLINE

in about 2 months

Boiler System Electrical ContractorThis subcontract opportunity is for a Boiler System Electrical Contractor to perform electrical wiring and power connection services for prime contractors on California Department of Corrections and Rehabilitation facility projects located in San Diego. The scope of work includes the installation of 480 VAC three-phase power ranging from 150 to 225 amps, as well as the wiring of control panels and boiler feed pumps utilizing weather-proof conduits to deliver a fully powered and grounded boiler system. Qualified bidders must hold a valid California C-10 license and ensure all installations comply with the National Electrical Code and local San Diego codes. The solicitation was posted on November 6, 2026, with a response deadline of December 1, 2026. This project falls under NAICS code 238210.

California Department of Corrections & Rehabilitation

POSTED

about 4 hours ago

DEADLINE

Commercial Electrical & Facility MaintenanceThis subcontract for Commercial Electrical and Facility Maintenance involves providing general electrical services for prime contractors on projects located at the Port of Stockton facility. The scope of work includes the maintenance of warehouse lighting, 80 street lights, switchboards, panels, and branch circuits. Additionally, the contractor is responsible for installing multi-meter services and providing raceways for security and camera systems in strict accordance with NEC standards to ensure fully operational electrical and exterior lighting systems. The opportunity is categorized under NAICS code 238210 and was posted on November 6, 2026. Interested parties must submit their responses by the deadline of December 16, 2026. This project is situated within the state of California and is managed through the Port of Stockton.

Port of Stockton

POSTED

about 5 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

Industrial Kitchen Degreasing and Cleaning SuppliesThis subcontract, issued by the Department of Defense under the FA4830 23 Cons Cc agency, involves the supply of industrial kitchen degreasing and cleaning materials for prime contractors working on US Air Force facility projects at Moody AFB. The scope of work requires the provision of industrial-grade degreasers, heavy-duty plastic sheeting and shrouding for equipment protection, and industrial taping materials. To ensure safety and compliance, all chemical supplies must be non-flammable and compatible with NFPA 96 standards, and must be delivered alongside the required Safety Data Sheets. The opportunity is designated as a Total Small Business Set Aside under NAICS code 423450. Interested parties must adhere to the response deadline of November 24, 2026. Performance of the contract will take place at Moody AFB, zip code 31699.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Commercial Vent Hood and Duct CleaningThis subcontract involves providing professional cleaning services for commercial kitchen exhaust systems at Moody Air Force Base for prime contractors. The scope of work requires cleaning hoods, ducting, vents, fans, louvers, filters, and bates to bare metal using a combination of power jet washing, hand scraping, and hand wiping. To ensure the protection of surrounding equipment, the contractor must install temporary shrouds during the process. All work must be performed in strict adherence to NFPA 96 and DAFMAN 91-203 standards, with final acceptance contingent upon approval from the base Fire Department. This opportunity is designated as a total Small Business Set Aside under NAICS code 561790 and is managed by the Department of Defense. Interested parties must respond by November 24, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Vent Hood Services

Solicitation # FA483027Q0004

Solicitation FA483027Q0004 is a request for commercial vent hood services for Moody Air Force Base, Georgia, and the Grassy Pond annex. The contractor is required to provide all labor, equipment, and materials to clean hoods and duct systems in accordance with NFPA 96 and DAFMAN 91-203 standards, utilizing methods such as power jet washing and hand scraping. The requirement includes quarterly and semi-annual cleaning schedules across multiple buildings. The contract structure consists of a twelve-month base period starting June 1, 2027, with four subsequent one-year option periods. It is important to note that while the government intends to award the service, funds are not presently available, and the obligation is contingent upon the availability of appropriated funds. This procurement is a 100 percent small business set-aside under NAICS code 561790. Award will be made to the lowest priced technically acceptable offeror, following a five-step evaluation process covering responsiveness, total evaluated price, technical acceptability, past performance, and price reasonableness. Offerors must be registered in SAM.gov and submit their quotations by 2:00 PM EST on November 24, 2026. Submissions must be divided into three volumes: Price, Technical (maximum 10 pages), and Past Performance. A site visit is scheduled for November 12, 2026, and all quotes must be emailed to the primary and alternate points of contact.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Compliance and Technical Documentation SupportThis contract involves providing support for the preparation of technical documentation, including capability statements, product specification sheets, and compliance matrices, specifically aligned with standards DAFI 36-2646, UFC 3-600-01, and UFC 4-179-02. The work is focused on ensuring adherence to these detailed regulatory and compliance requirements, which are critical in the context of Department of Defense operations and guidelines. Designated as a subcontract opportunity under a Total Small Business Set-Aside (FAR 19.5), the contract falls within the NAICS code 541330, which pertains to engineering services. The performance location is specified as Fort Moore, with the Department of Defense serving as the contracting agency. This specialized documentation support is intended to facilitate compliance and technical validation within defense-related projects, emphasizing expertise in both regulatory standards and technical writing necessary to meet stringent government specifications.

Engineering Services

POSTED

DEADLINE

Specialized Room Construction and Acoustic ModificationsThis contract involves the construction or retrofit of a specialized room designed to house a virtual weapons range. The scope includes building walls and doors rated at STC 50 for soundproofing, installing sealed concrete flooring with a raised firing platform, and ensuring a minimum ceiling height of ten feet. These requirements target a highly controlled acoustic environment suitable for training and operational use. The contract is a subcontract set aside entirely for small businesses under the Small Business Administration guidelines (FAR 19.5). It falls under the NAICS code 236220, which pertains to commercial and institutional building construction. The work is to be performed at Fort Moore, with oversight by the Department of Defense, specifically the FA4830 23 Cons Cc office. The project emphasizes both structural modifications and acoustic considerations to meet the specific demands of the virtual weapons training system.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Virtual Weapons Range System Integration and Hardware SupplyThe contract involves the supply and integration of a stationary, multi-lane virtual weapons training system designed to simulate domestic environments and firing distances ranging from 7 to 300 meters. The system utilizes free-carry M4 and M18 replica weapons to provide realistic training scenarios. This contract is a total small business set-aside under the NAICS code 334510, indicating it focuses on electronic equipment manufacturing. The Department of Defense's FA4830 23 Cons Cc is the contracting agency, with the place of performance specified as Fort Moore, ZIP code 31699. The contract was posted on May 19, 2026, and is categorized as a subcontract opportunity. This initiative aims to enhance training capabilities by providing advanced, integrated virtual weapons range hardware and software solutions that simulate real-world operational conditions for military personnel.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS