Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Specialized Room Construction and Acoustic Modifications

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the construction or retrofit of a specialized room designed to house a virtual weapons range. The scope includes building walls and doors rated at STC 50 for soundproofing, installing sealed concrete flooring with a raised firing platform, and ensuring a minimum ceiling height of ten feet. These requirements target a highly controlled acoustic environment suitable for training and operational use. The contract is a subcontract set aside entirely for small businesses under the Small Business Administration guidelines (FAR 19.5). It falls under the NAICS code 236220, which pertains to commercial and institutional building construction. The work is to be performed at Fort Moore, with oversight by the Department of Defense, specifically the FA4830 23 Cons Cc office. The project emphasizes both structural modifications and acoustic considerations to meet the specific demands of the virtual weapons training system.

General Info

Subcontract for soundproof room construction with STC 50 walls, raised platform, Fort Moore location.

Agency

Department Of Defense → FA4830 23 Cons CcView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4830 23 Cons Cc
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA4830 23 Cons Cc
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Construction or retrofit of a dedicated room with STC 50-rated walls and doors, sealed concrete flooring with raised firing platform, and 10-foot minimum ceiling height to house the virtual weapons range.

Similar Contracts

Same NAICS industry code

NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe Port of Seattle through its Aviation Project Management Group is forecasting a procurement under NAICS code 236220 for the full design, permitting, and construction services to replace the Checkpoint 5 security grill. The scope encompasses a comprehensive range of activities including site assessment, development of design drawings and technical specifications compliant with TSA CRPG Section 3-5, submission for regulatory review and permit acquisition, demolition and proper disposal of the existing grill, fabrication and installation of the new system, and seamless integration with existing structural, electrical, and security badge access systems. Coordination with all relevant stakeholders is required to ensure adherence to safety and operational standards while minimizing disruption to airport functions. The project is structured under a design-build-bid delivery method and is being managed by the Port of Seattle with primary contact Yanet Maldonado and project manager Collette Deardorff available for inquiries. The solicitation was posted on July 31, 2026, and while no specific award date or set-aside details are provided, the location of performance is tied to the Port of Seattle’s facilities. All work must be executed with strict attention to federal security requirements and operational continuity in a high-traffic aviation environment.
Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe contract involves a comprehensive renovation and structural upgrade of the Customer Service Building at the Rental Car Facility to prepare for a new concession agreement and tenant construction beginning June 1, 2027. Key improvements include updating wayfinding signage to reflect new tenant layouts, constructing a new break room and flex space to support transit operations, renovating existing restrooms, and replacing outdated car wash equipment in the Quick Turn Around areas. Structural enhancements are also required to address cracking and repair post-tension cables, along with replacing expansion joints on the fifth floor plaza areas to ensure long-term durability and safety. These modifications are designed to modernize the facility and align its infrastructure with future operational needs. The project is managed by the Port of Seattle’s Aviation Project Management Group, with official point of contact Angela Peterson and Project Manager Julia Ruzon overseeing procurement and implementation. The work falls under NAICS code 236220, indicating commercial building construction, and is forecasted with a posted date of July 31, 2026. While no solicitation number or set-aside details are provided, the scope underscores a major capital improvement initiative focused on functionality, tenant readiness, and structural integrity for a high-traffic facility serving airport operations.
Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
Enlisted Unaccompanied Personnel Housing at Eglin AFB, FL
Solicitation # enlisted-unaccompanied-personnel-housing-eglin-afb-fl
The contract is for the construction of two two-story enlisted unaccompanied personnel housing barracks at Eglin Air Force Base, Florida, each designed to accommodate 120 personnel across 32 individual units. Each unit includes a kitchen, dining area, living space, and laundry room, while the buildings are equipped with shared amenities such as lobbies, elevators, entrance vestibules, exercise rooms, day rooms, lounges, and dedicated mechanical, electrical, and communications rooms. The project encompasses extensive sitework including parking lots for vehicles and motorcycles, roadways, concrete sidewalks, grading, a storm sewer system, utilities, landscaping, and incidental related tasks. Additional site amenities feature a large open pavilion, a basketball court, and a volleyball court. The scope of work spans multiple construction disciplines including demolition, sitework, concrete, masonry, steel, millwork, insulation, roofing, waterproofing, doors and hardware, glass and glazing, drywall, flooring, paint, specialties, elevators, plumbing, HVAC, fire protection, electrical, fencing, and asphalt paving. The solicitation is issued by Roy Anderson Corp as the general contractor through an Invitation to Bid, with a submission deadline of August 18, 2026, at 1:00 PM CT. The contract is set aside for small business participation and specifically encourages involvement from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Offerors must demonstrate compliance with federal equal opportunity requirements under Executive Order 11246, Section 503 of the Rehabilitation Act of 1973, and the Vietnam Era Veterans’ Readjustment Assistance Act of 1974, and are encouraged to engage subcontractors from Minority, Disadvantaged, Women’s, and HUBZone business enterprises. Proposals must include all necessary labor, materials, supervision, and equipment for the assigned scope and must be submitted via email to Patrice Lindman or by fax, with confirmed intent to bid required prior to the deadline.
Roy Anderson Corp

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 236220
New
Windsor SECONDARY TREATMENT SYSTEM UPGRADES PROJECT
Solicitation # windsor-secondary-treatment-system-upgrades-project-0
The project involves significant upgrades to the Water Reclamation Facility’s secondary treatment system, including dewatering and excavating the existing aeration basin to install a new reinforced concrete structure equipped with a flow splitting system, air distribution lines, diffusers, a mixing system, surface waste pumping, and a high flow return pump linking to an adjacent storage pond. Companion infrastructure includes a new blower building housing internal blowers and a dedicated electrical control building, along with a separate carbon feed building containing chemical storage tanks and metering pumps. Additional work entails constructing a below-grade weir flow splitting structure for the secondary clarifiers and relocating a concrete sand filter high flow diversion structure. The contract has a duration of 482 working days with defined intermediate milestones, and participation from disadvantaged, veteran-owned, women-owned, minority, and small businesses is strongly encouraged in alignment with federal and state goals. Funding for this initiative may be partially or fully sourced through the EPA’s WIFIA program, triggering specific compliance requirements outlined in Section 9 of the Special Provisions that contractors and subcontractors must strictly adhere to. The solicitation, issued under NAICS code 236220 for water and wastewater construction, is set aside for small businesses including SDB, WOSB, MBE, and DBE entities as defined by SBA and non-federal certifications. The pre-bid conference was held on January 14, 2026, and all contract documents, including plans, specifications, and proposal forms, are available free of charge via the Town of Windsor’s website after completing a brief registration form. Bids are due by September 3, 2026, and potential bidders must register on BuildingConnected to access the full solicitation materials. Point of contact for inquiries is Anna Stein of C. Overaa & Co.
C. Overaa & Co.

POSTED

about 10 hours ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

NAICS: 336110
New
Federal
15 Person Shuttle Bus
Solicitation # FA483026Q0048
The U.S. Air Force is seeking a qualified small business vendor to supply one new 15-passenger shuttle bus, configured for 14 passengers and one driver, to support the 23 Force Support Squadron at Moody Air Force Base in Georgia. The vehicle must be a current model year or newer, delivered in pristine, brand-new condition, and meet a comprehensive set of technical specifications including a V8, V6 twin-turbo, or diesel engine with heavy-duty transmission and cooling, factory-installed Class III or IV towing package with 7-pin wiring and trailer brake controller, dual-zone climate control, slip-resistant rubber flooring, 3-point seatbelts for all seating positions, and advanced safety systems such as ABS, ESC, airbags, TPMS, and a backup camera. The vendor must provide three complete sets of keys and original OEM operator and maintenance manuals, along with a minimum 3-year or 36,000-mile bumper-to-bumper warranty and a 5-year or 60,000-mile powertrain warranty. Delivery is required FOB Destination to the 23rd FSS at Moody AFB, with final inspection and acceptance performed by the Government upon arrival, and the contractor is responsible for correcting any non-compliance at no additional cost. This acquisition is a total small business set-aside under FAR 19.5 with NAICS code 336110, limiting eligibility to small businesses with no more than 1,250 employees. All responses must be submitted electronically via email to both the primary and alternate points of contact by 10:00 AM EST on August 4, 2026, and include the solicitation number FA483026Q0048. Questions must be submitted by July 28, 2026, using the official Contractor Questions form in Word or PDF format, with all responses to inquiries posted as amendments on SAM.gov by July 30, 2026. While pricing and availability details are required from vendors, the Government currently has no funds allocated for this procurement, and no award will be made until appropriated funds become available; the Government reserves the right to cancel the solicitation without obligation to reimburse any offeror costs. The award decision will be based on best overall value to the Government, balancing technical compliance with price, though no formal evaluation factors, weights, or adjectival ratings are specified in the documentation.
Automobile and Light Duty Motor Vehicle Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 17 hours
View Details
NAICS: 333310
New
Federal
Wheel Washer
Solicitation # FA483026Q0051
The Government is soliciting competitive bids for a specialized wheel washer system essential to maintaining C-130 aircraft readiness through squadron-level wheel overhaul operations. The contractor must furnish, deliver, install, test, and commission a fully operational unit at the 71st Isochronal Maintenance Facility in Fort Moore, Georgia, with all work required to be completed no later than 90 calendar days after contract award. The equipment must feature a heated wash system, automated brushing, and high-pressure spray cleaning with C-130-specific brushes housed in a chamber measuring a minimum of 26 inches on each side. The cleaning solution must be water-based with no adverse environmental impact, and the system must comply with all applicable industry safety standards for automated and high-pressure machinery. Electrical infrastructure at the site has been pre-installed and the contractor is responsible for ensuring full compatibility. The solicitation is structured as a Firm Fixed-Price contract with a clear cost breakdown required for four distinct line items: the wheel washer unit including initial cleaning solution and brushes, shipping and handling to the delivery location, installation and commissioning labor, and on-site training along with the delivery of comprehensive operation, maintenance, and safety manuals. Proposals must be submitted via email by 10:00 AM EST on July 30, 2026, with attachments limited to .pdf, .doc, or .xls formats. Evaluation will follow a Lowest Price Technically Acceptable approach, where proposals must first pass a mandatory technical compliance threshold—meeting all dimensional, functional, and environmental requirements—before price becomes the determining factor. Delivery schedule and past performance in supplying industrial cleaning or aviation ground support equipment are secondary differentiators. The set-aside is reserved exclusively for small businesses under NAICS code 333310, and no funds are currently available; award will be contingent upon future funding availability. Final acceptance requires successful demonstration of operational capability and formal Government sign-off after installation, testing, and completion of training.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 811111
New
Federal
ARFF Vehicle Power Divider Repair/ReplacementThe contract outlines the repair or replacement of the power divider system on the P-19 ARFF vehicle in strict accordance with original equipment manufacturer specifications. The work must be performed to ensure full operational compliance and safety standards, with all materials and procedures aligned to OEM guidelines. This subcontract is issued under the NAICS code 811111, indicating it pertains to automotive repair and maintenance services, and is tied to a Department of Defense agency identified as FA4830 23 Cons Cc. The place of performance is designated with a zip code of 31699, though no specific city or state is provided, and all work must be completed at that location. Responsibilities under this contract must be fulfilled by the designated subcontractor prior to the response deadline of August 6, 2026, at 4:00 PM, with the solicitation posted on July 31, 2026. There is no set-aside designation specifying small business or other preferences, and no point of contact information is provided within the details. The solicitation is accessible through a SAM.gov portal link, which may be used for submission of proposals or additional inquiries. The nature of the work requires technical expertise in heavy-duty vehicle systems, particularly those used in aircraft rescue and firefighting applications, where reliability and precision are critical for mission readiness.
General Automotive Repair

POSTED

6 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 811111
New
Federal
Crash 15 Power Divider
Solicitation # FA483026Q0063
This sources sought notice is issued for market research only and does not constitute a solicitation, guarantee of future contract action, or commitment to award or pay for any information provided. The Government seeks potential contractors capable of performing a critical repair or replacement of the power divider assembly on a 2008 P-19 Oshkosh 1,500-Gallon Aircraft Rescue & Fire Fighting (ARFF) vehicle, serial number 10TBKAK168S104292. The repair is necessitated by internal failures identified during maintenance, including metallic contamination and broken spring assemblies in the power divider, which pose serious safety and operational risks. The work requires complete removal, teardown, inspection, and restoration to OEM standards using genuine replacement parts, with all components reassembled and torqued to factory specifications. The contractor must transport the vehicle to and from Moody AFB, Georgia, maintain the vehicle’s battery during the repair cycle, and ensure that all connected systems including hoses, electrical harnesses, and body panels are properly handled, reinstalled, and tested. Post-repair validation includes operational testing to confirm zero leaks and full system functionality under OEM benchmarks. The contractor is required to provide a 12-month warranty on all parts and labor, with a 10-day response timeline for warranty claims, and must report on repair progress and potential delays. Responses must include company details, capability statement, relevant work history, socio-economic status, and must reference the Sources Sought ID FA483026Q0063, with all submissions due by 12:00 PM Eastern Time on August 6, 2026.
General Automotive Repair

POSTED

6 days ago

DEADLINE

in about 14 hours
View Details