Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

J--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Active
N0038312PG029Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of 10 units of a specific circuit card assembly for repair or modification, with delivery terms set as FOB origin. The intended recipient of the items is Data Link Solutions LLC, located in Cedar Rapids, Iowa. The procurement is conducted under a sole-source negotiation process due to the flight-critical nature of the item and the lack of adequate technical data to support open competition. Only suppliers previously approved by the Government are being solicited, emphasizing stringent source approval requirements to ensure quality and reliability. Potential vendors not currently approved must submit detailed technical information in accordance with NAVSUP Weapon Systems Support source approval brochures to be considered. The Government reserves the right to proceed with the current approved sources if new source approval cannot be obtained in time to meet operational needs. This contract reflects a highly controlled acquisition process managed by the Naval Supply Systems Command Weapon Systems Support office, located in Philadelphia, Pennsylvania, highlighting the importance of maintaining fleet readiness and support continuity.

General Info

Procurement of 10 circuit card assemblies, sole-source, FOB origin to Data Link Solutions.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
ContactsNo contacts available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support
Office AddressPHILADELPHIA, PA, 19111-5098, USA
ContactsNo contact information available

Full Description

Show more
NSN 7R-5998-014817446-CC, IAW REF NR H274A077-10, QTY 10 EA, DELIVERY FOBORIGIN, ISSUE TO DATA LINK SOLUTIONS LLC, CEDAR RAPIDS, IA 52498-0001. Thisnotice of intent is not a request for competitive quotes and theproposed/contract action is for supplies or services for which the Governmentintends to negotiate with only one source. Interested persons may identify theirinterest and capability to respond to the requirement or submit quotes. Quotesreceived prior to the award date will be considered by the Government.Adetermination by the Government not to compete this proposed contract based uponresponses to this notice is solely within the discretion of the government.Information received will normally be considered solely for the purpose ofdetermining whether to conduct a competitive procurement. The Governmentphysically does not have in its possession sufficient,accurate, or legible datato purchase this part from other than the current source(s). The subject itemrequires Government source approval prior to contract award, as the item isflight critical and/or the technical data available has not been determinedadequate to support acquisition via full and open competition. Only thesource(s) previously approved by the Government for this item have beensolicited. The time required for approval of a new source is normally such thatan award cannot be delayed pending approval of a new source. If you are not anapproved source you must submit, together with your proposal, the informationdetailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) SourceApproval Information Brochures listed below. Spares: www.neco.navy.mil/sar.aspxRepair: www.neco.navy.mil/sarr.aspx These brochures identify the technical datarequired to be submitted based on your company's experience in production of thesame or similar item, or if this is an item you have never made. If your requestfor source approval is currently being evaluated at NAVSUP WSS submit with youroffer a copy of the cover letter which forwarded your request for sourceapproval. Offers received which fail to provide all data required by the SourceApproval Brochure or document previous submission of all data required by theSource Approval Brochure will not be considered for award under thissolicitation. Please note, if evaluation of a source approval request submittedhereunder cannot be processed in time and/or approval requirements preclude theability to obtain subject items in time to meet Government requirements, awardof the subject requirement may continue based on Fleet support needs. The NAVSUPWSS Commercial Item Identification Brochureis now available at:"https://www.neco.navy.mil/cib.aspx". -SEE NOTES 9, 26

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
SLED
LED Digital Display Supply and IntegrationThis subcontract agreement involves the supply and integration of a high-resolution four-color LED display system for the City of Augusta Recreation and Parks Department. The selected contractor is responsible for furnishing and configuring a Daktronics GT6X or equivalent 10mm display with a 108 by 324 matrix. The scope of work includes the full installation of the hardware, the setup of cellular communication for connectivity, and the provision of webinar training to ensure City staff can operate the system effectively. To qualify for this project, the contractor must hold the necessary manufacturer certification to ensure professional installation and system integrity. The final deliverable is a fully operational LED display with active cellular connectivity. Interested parties must submit their responses by December 1, 2026, at 4:00 PM.
City of Augusta

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334418
New
DIBBS
SOLENOID ASSEMBLY
Solicitation # SPE4A6-27-T-5978
Solicitation SPE4A6-27-T-5978 is for the procurement of 14 solenoid assemblies, identified by NSN 5945-00-948-1481 and Honeywell Aerospace part number 311473-4. This is not a small business set-aside and falls under NAICS code 334418. The contract is issued by the DLA Weapons Support ASC Commodities Division with a required delivery date of December 5, 2027, and a need ship date of April 20, 2027. Delivery is specified as FOB Origin, with destination inspection and acceptance required. The procurement is part of the First Destination Transportation program to utilize Government-Arranged Transportation. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331, and component lead finish marking according to IPC/JEDEC J-STD-609. The item is designated as a critical application item, and the intentional addition of mercury or mercury-containing compounds is prohibited. Packaging must comply with MIL-STD-2073-1E and RP001 DLA requirements. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act and Berry Amendment, and the safeguarding of covered defense information. Evaluation may prioritize offers with expedited delivery schedules, and additive manufacturing is prohibited unless specifically authorized.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334418
New
SLED
Engineering White Bond Paper SupplierThis subcontract agreement establishes a partnership for the supply and delivery of Engineering White Bond paper rolls to support prime contractors under Alabama Department of Transportation supply contracts. The scope of work requires the provision of 105 rolls of 34 by 650 inch paper and 700 rolls of 17 by 650 inch paper, all featuring 3-inch cores, to be delivered to designated state locations. The contract is managed by the Alabama Department of Transportation G24 Office Engineer and falls under NAICS code 334418. A critical compliance requirement for the supplier is adherence to the Beason-Hammon Alabama Taxpayer and Citizen Protection Act, which mandates the use of E-Verify.
Alabama Department of Transportation, G24 Office Engineer - Proposal Engineer

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334418
New
Federal
Avionics Circuit Card Assembly (CCA) Repair ServicesThe Avionics Circuit Card Assembly (CCA) Repair Services subcontract involves providing specialized component-level diagnostics, soldering, and repair for complex circuit cards supporting Air Force Sustainment Center avionics projects. The scope of work specifically includes the testing and repair of MUX CCAs, Power Supply CCAs, and CDEEU Mother Boards to ensure the delivery of fully functional repaired assemblies. Operating under NAICS code 334418 for the Department of Defense, the contractor must maintain strict compliance with ANSI/ESD-S20.20-2021 standards. Additionally, the project requires adherence to CMMC Level 2 and DFARS 252.204-7012 regulations to ensure the secure handling of Controlled Unclassified Information.
FA8251 Afsc Pzabb

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334418
New
Federal
Manufacture and Supply of Switch Connect Assemblies (NIIN 016527657)This subcontract involves the manufacture and supply of Switch Connect Assemblies, identified by NIIN 016527657, for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The contractor is responsible for fabricating these assemblies in strict accordance with TDP Version 003 and IRPOD drawings, ensuring that electrostatic protection is maintained per ASTM D3951-18 standards. Compliance requirements for this contract include adherence to the Buy American Act and DFARS cybersecurity safeguarding protocols. All finished assemblies must be delivered with a Certificate of Compliance as specified by DI-MISC-81356. The opportunity falls under NAICS code 334418, with a response deadline set for November 27, 2026.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 334418
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010427QDA10
This presolicitation notice, issued by the Navsup Weapon Systems Support Mech, seeks the procurement of 30 circuit card assemblies under NSN 7H-5998-013864016. The items are to be delivered to DLA Distribution New Cumberland, Pennsylvania. Due to the specialized engineering skills, unique design capabilities, and proprietary technical data required to maintain part quality, the government intends to solicit and negotiate with a single source under FAR 6.302-1. Any alternate source must undergo a rigorous qualification process approved by the cognizant Government engineering activity. The acquisition is designated as a total Small Business Set Aside. While the government is not currently utilizing FAR Part 12 for commercial items, interested parties may submit capability statements or identify their interest within 15 days of the notice. Technical specifications and standards are available through the DoD Single Stock Point or the ASSIST-Online portal. The response deadline for this action is November 30, 2026.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334418
New
Precision Manufacture of Motional TransducersThis subcontract involves the precision manufacture of six motional transducers under NSN 6695-01-093-7842 for the Department of the Navy's NAVSUP Weapon Systems Support. The selected contractor is responsible for fabricating the units in strict accordance with Technical Data Package Version 006, utilizing specialized precision machining and assembly equipment to ensure all quality assurance and inspection standards are met. The contractor must adhere to Buy American clauses and provide Material Safety Data Sheets that comply with OSHA and FED STD 313 regulations. Performance of the contract will take place in Mechanicsburg, Pennsylvania, with a response deadline set for November 30, 2026.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334418
New
Manufacture of Universal BOB CardThis subcontract, managed by the Department of the Navy under the SPRMM1 DLA Mechanicsburg agency, involves the manufacture and delivery of one Universal BOB Card (NIIN: 016703162) for prime contractors on DLA supply contracts. The fabrication process must strictly adhere to Cage Code 0RJ73 and reference SE-01030-1, utilizing specialized PCB fabrication and assembly equipment to ensure an exact product. Additionally, the contractor is required to perform physical identification and marking in accordance with MIL-STD-130, REV N. The opportunity is designated as an SBA set-aside under NAICS code 334418, with the place of performance located in Mechanicsburg, Pennsylvania. The solicitation was posted on October 30, 2026, and requires a response by November 16, 2026. The final deliverable consists of one completed, physically marked, and fully documented Universal BOB Card.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
Bare PCB FabricationThis subcontract involves the fabrication of raw, unpopulated printed circuit boards for prime contractors supporting DLA and Navy electronic component projects. The scope of work includes chemical etching, drilling, plating, and solder mask application, specifically adhering to the technical data package Version 003 and design specifications for Reference Number 8383870-1. The contractor is required to use high-grade laminates and specialized PCB fabrication machinery to deliver bare circuit boards. Managed by the Department of the Navy through SPRMM1 DLA Mechanicsburg, the project falls under NAICS code 334418. The place of performance is located in Mechanicsburg, Pennsylvania. The solicitation was posted on October 30, 2026, with a response deadline set for November 20, 2026.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 334418
New
Display Unit Component SupplyThis subcontract involves the supply of OEM or approved equivalent electronic components, screens, and circuitry to support prime contractors for the Department of the Navy's Navsup Weapon Systems Support Mechanicsburg. The primary objective is to source sub-assemblies necessary for restoring Display Unit NIIN 015690680 to A condition stock, with all certified replacement parts delivered directly to the designated repair facility in Mechanicsburg. The contract requires strict adherence to Buy American-Free Trade Agreements and MIL-STD-130 standards for unique identification. Operating under NAICS code 334418, the project ensures that all supplied components meet rigorous military specifications to maintain the operational integrity of the naval display units.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 334418
New
Supply of Circuit Card Assembly (NSN 5998-01-501-6736)This subcontract, issued by the Department of the Navy via the Pa DLA Aviation At Philadelphia, requires the manufacture or sourcing of two specialized Circuit Card Assemblies identified as NSN 5998-01-501-6736. The selected provider must possess PCB fabrication capabilities and ensure strict adherence to DFARS 252.225-7020 trade compliance. All hardware must be preserved, packed, and marked in accordance with MIL-STD-2073, MIL-STD-2073-1, and MIL-STD-129 standards. The project falls under NAICS code 334418, with the place of performance located in Philadelphia, Pennsylvania. Responses are due by November 16, 2026.
Pa DLA Aviation At Philadelphia

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
CIRCUIT CARD ASSEMB — 5998015016736 — SPRPA127QXA68
Solicitation # SPRPA127QXA68
Solicitation SPRPA1-27-Q-XA68, issued by DLA Aviation at Philadelphia for the Department of the Navy on October 30, 2026, seeks quotations for the procurement of two Circuit Card Assemblies (NSN 5998-01-501-6736). The requirement is split into two line items, 0001AA and 0001AB, each for one unit to be delivered FOB Destination. Quotations are due by November 16, 2026. The government intends to make a single award to a technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. The contractor must adhere to strict quality and logistics standards, including ISO 9001 certification and MIL-STD-129 for marking and labeling. Packaging must comply with MIL-STD-2073-1 for stock and overseas shipments, or ASTM D3951-18 for domestic commercial packaging, with specific requirements for electrostatic discharge protection per ANSI/ESD S20.20-2021. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, safeguarding covered defense information under DFARS 252.204-7012, and the electronic submission of payment requests via Wide Area WorkFlow. Inspection and acceptance will occur at the point of origin.
Pa DLA Aviation At Philadelphia

POSTED

2 days ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 335220
New
Federal
SAE-AS22759 Series Wire and Avionics Component SupplyThis subcontract involves the supply of certified SAE-AS22759 series wiring and new replacement avionics components for prime contractors supporting NAVSUP Weapon Systems Support CV-22 aircraft projects. All materials must be provided in accordance with approved drawings and FAR 52.211-5, with a strict prohibition against the use of MIL-W-81381 wire. Deliverables include certified wire spools and electronic components, each accompanied by the necessary certifications of conformance. Managed under NAICS code 335220 for the Department of Defense, the opportunity was posted on October 30, 2026, with a response deadline of November 13, 2026. The contract ensures that critical aviation components meet rigorous military and technical specifications to maintain the operational integrity of CV-22 aircraft.
Major Household Appliance Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
Federal
Radome and Antenna Repair/OverhaulThis subcontract involves the structural repair, surface restoration, and testing of aircraft radomes and antennas specifically for CV-22 aircraft projects under the Navsup Weapon Systems Support. The scope of work includes inspecting for composite degradation, executing composite repairs utilizing specialized curing equipment, and validating RF transparency to ensure operational functionality. The contractor is responsible for ensuring all items are packaged according to MIL-STD-2073 and marked in compliance with MIL-STD-130 prior to final delivery. This effort falls under NAICS code 336413 and is managed through the Department of Defense.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
Federal
Inertial Navigation and Infrared Detecting Set RepairThis subcontract involves the precision repair and calibration of infrared detecting sets and inertial navigation systems supporting NAVSUP Weapon Systems Support CV-22 aircraft projects. The scope of work includes performing detailed teardowns, evaluations, and environmental testing utilizing specialized test benches for IR optics and inertial sensors to ensure the delivery of fully calibrated and serviceable units. To qualify, the contractor must operate calibration laboratories that comply with ISO-10012-1 or ANSI/NCSL Z540.3 standards. This Department of Defense requirement falls under NAICS code 334516, with a response deadline set for November 13, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334290
New
Federal
Radar Data Processor, Transmitter, and Receiver RepairThis subcontract involves the teardown, evaluation, component-level repair, and testing of radar electronic assemblies for NAVSUP Weapon Systems Support CV-22 aircraft projects. The scope of work focuses on repairing Radar Data Processors, Transmitters, and Receivers, requiring strict adherence to SAE-AS22759 series wiring and IPC/EIAJ-STD-001C soldering standards. The contractor is responsible for utilizing radar signal processing validation equipment to ensure all repaired RFI units are fully tested and functional upon delivery. Managed under the Department of Defense, this project falls under NAICS code 334290. The solicitation was posted on October 30, 2026, with a response deadline of November 13, 2026. The primary objective is to provide critical maintenance and repair services for prime contractors to support the operational readiness of CV-22 aircraft radar systems.
Other Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
Federal
Replacement Components for Valve Assembly (NSN 4810-01-606-2525)This subcontract involves the provision of internal components, seals, gaskets, and hardware for US Navy valve overhaul projects managed by Navsup Weapon Systems Support. The scope of work requires the manufacture or sourcing of parts that strictly adhere to OEM or Navy specifications, including the delivery of Ready For Issue spare replacement assemblies and sub-assemblies to designated repair facilities. The contract emphasizes strict adherence to the Buy American and Balance of Payments Program requirements. Operating under NAICS code 332911, the project specifically focuses on replacement components for Valve Assembly NSN 4810-01-606-2525, with a response deadline set for November 30, 2026.
Industrial Valve Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 811212
New
Federal
Valve Assembly (NSN 4810-01-606-2525) Overhaul and RepairThis subcontract involves the overhaul and repair of MANI Valve Assemblies (NSN 4810-01-606-2525) to support prime contractors on US Navy projects for the Navsup Weapon Systems Support under the Department of Defense. The scope of work includes the complete teardown, cleaning, and evaluation of components against established repair manuals, followed by the replacement of defective parts and reassembly according to specified technical drawings. All work must be performed in QMS-compliant facilities using specialized test equipment to ensure the final delivery of a certified Ready For Issue valve assembly. This project falls under NAICS code 811212, with a response deadline set for November 30, 2026.
Computer and Office Machine Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 423610
New
Federal
Data Transfer Unit Replacement Parts SupplyThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the procurement and delivery of replacement parts for Data Transfer Units. The selected provider is responsible for sourcing OEM or approved equivalent electronic components for part number 4881-01000-15-101 and national stock number 5999016517373. All components must be delivered directly to the designated repair facility and must be accompanied by the required Certificates of Conformance. Compliance with federal regulations is mandatory, specifically regarding the Buy American Act and DFARS prohibitions concerning covered semiconductors. The opportunity falls under NAICS code 423610, with a response deadline set for November 26, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 488410
New
Federal
Military Grade Packaging and Labeling ServicesThis subcontract for Military Grade Packaging and Labeling Services involves providing specialized preservation, packaging, and marking for sensitive electronic equipment supporting Navsup Weapon Systems Support projects. The contractor is responsible for ensuring all units are preserved according to MIL-STD-2073-1 and labeled in compliance with MIL-STD-129 and MIL-STD-130, which includes the application of Unique Item Identification. To fulfill these requirements, the provider must utilize MIL-SPEC packaging materials and specialized UID marking equipment. The specific scope of work concludes with the delivery of three packaged DKU00E units prepared for shipment to MAPAC. This effort falls under NAICS code 488410 and is managed under the Department of Defense.
Motor Vehicle Towing

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 518111
New
Federal
Data Transfer Unit (DTU) Repair ServicesThis subcontract for Data Transfer Unit Repair Services involves the technical repair and refurbishment of three Data Transfer Units, identified by NSN 5999016517373, for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work requires the inspection and testing of these units according to original manufacturer specifications and drawings to ensure they are returned to operational status RMC 3C. To successfully execute the contract, the provider must utilize calibrated testing equipment and maintain strict adherence to NIST SP 800-171 cybersecurity compliance standards. The final deliverable consists of three fully repaired and tested units. The opportunity was posted on October 30, 2026, with a response deadline of November 26, 2026, under NAICS code 518111.
Internet Service Providers

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 336412
New
Federal
Supply of Thrust Reverser Section (NIIN 016276043)This subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the supply of a specific thrust reverser section identified by NIIN 016276043. The contractor is required to manufacture and deliver the part in strict accordance with Technical Data Package Version 001 to prime contractors supporting Department of the Navy aviation projects. The agreement mandates full compliance with the Buy American Act and Balance of Payments Program certifications to ensure products are sourced from the United States or qualifying countries. The scope of work concludes with the physical delivery of the thrust reverser sections to the designated government or prime contractor facility.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
15--THRUST REVERSER SEC, IN REPAIR/MODIFICATION OF
Solicitation # N0038325QT569
Navsup Weapon Systems Support is soliciting firm fixed price quotes for the repair, overhaul, and upgrade of Thrust Reverser Sec components (P/N 315A2535-4, NSN 1560-01-627-6043) to return them to a Ready for Issue condition. This is a total small business set-aside requiring the awardee to be a small business supplier providing FAA-Certified parts with an FAA Authorized Release Certificate and FAA Form 8130-3 from a certified repair station. The scope of work includes teardown, evaluation, testing, and inspection in accordance with The Boeing Company drawing 81205, with a required Repair Turnaround Time of 90 days after receipt of the asset. The government intends to make a single award based on a best-value determination, evaluating price, repair turnaround time, and past performance. Contractors must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards. Key administrative requirements include the use of the Wide Area Workflow system for invoicing and adherence to MIL-STD-2073-1 for packaging. The solicitation period has been extended to November 30, 2026, and quotes must be submitted via email to the designated point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
15--RADOME - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0038325RD138
This negotiated request for proposal, issued by Navsup Weapon Systems Support in Philadelphia, establishes a requirement for the repair, overhaul, and testing of various components to support the CV-22 aircraft system. The scope of work includes returning assets to a Ready For Issue condition, specifically targeting items such as radar data processors, inertial navigation systems, radar sets, transmitters, receivers, radomes, infrared detecting sets, and antennas. The contractor is responsible for providing all necessary labor, materials, and tooling, with a strict prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Performance is measured by Repair Turnaround Times (RTAT) ranging from 86 to 269 days depending on the specific National Item Identification Number. The contractor must utilize the Commercial Asset Visibility system for transaction reporting and the Wide Area Workflow system for invoicing. Quality requirements are stringent, requiring adherence to ISO 9001/SAE AS9100 standards and specific calibration protocols. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Key contractual provisions include strict guidelines for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) protocols, and adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334418
Awarded
Federal
GE VME Boards with supporting hardware
Solicitation # FA8224-12-R-0009

POSTED

almost 15 years ago

CLOSED

almost 15 years ago
View Details
NAICS: 334418
Federal
J--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0038312PG028
Navsup Weapon Systems Support

POSTED

almost 15 years ago

DEADLINE

N/A
View Details
NAICS: 334418
Awarded
Federal
59--PXI Analog Boards
Solicitation # N6893612T0037
Naval Air Warfare Center

POSTED

almost 15 years ago

CLOSED

almost 15 years ago
View Details
NAICS: 334418
Awarded
Federal
General Standards Serial Boards for NOAA, AOC
Solicitation # NMAN6000-12-01034
Department Of Commerce Noaa

POSTED

almost 15 years ago

CLOSED

almost 15 years ago
View Details
NAICS: 334418
Awarded
Federal
59--Electrical and Electronic Equipment Components
Solicitation # SPRTA1-12-Q-0015

POSTED

almost 15 years ago

CLOSED

almost 15 years ago
View Details
NAICS: 334418
Awarded
Federal
1553 Bus Analyzer Pass-3200 Cards
Solicitation # AV1FG00600FG00
Amsam-Spk

POSTED

almost 15 years ago

CLOSED

almost 16 years ago
View Details
NAICS: 334418
Awarded
Federal
Switch Proximity
Solicitation # SPM7M812R0002

POSTED

almost 15 years ago

CLOSED

almost 15 years ago
View Details
NAICS: 334418
Federal
J--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010412PLA29
Navsup Weapon Systems Support Mech

POSTED

almost 15 years ago

DEADLINE

N/A
View Details
NAICS: 334418
Awarded
Federal
59--Dual Channel Fiber Optic Transmitter CCA
Solicitation # N6554010R0048
Nswc Carderock

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334418
Awarded
Federal
59--CIRCUITCARD ASSEMB
Solicitation # SPM7M512T0446

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334418
Awarded
Federal
20--The Department of the Navy is awarding a five (5) year contract to support the PHALANX Close-in Weapon System (CIWS).
Solicitation # N0010410RL003
Navsup Weapon Systems Support Mech

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 334418
Awarded
Federal
Electronic Components Assembly
Solicitation # SPM7L211R0078

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS