Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on August 19, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J--OPTION - Maintenance and Repair of Self Contained Breathing Apparatus (SCBA) Equipment

Awarded
W911S820R0011Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab, and no loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. All work must adhere to manufacturer specifications, and the final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a small business set-aside opportunity under NAICS code 811310, with award based on best value. Interested offerors must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, proof of insurance, and any applicable SBA certification letters by November 3, 2026. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31, FAR clauses regarding small business utilization, and strict security and confidentiality requirements regarding non-public information. Proposals must include an itemized breakdown of costs and warranty information for parts and labor.
Earle C. Clements Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 3 days
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

about 15 hours ago

DEADLINE

in 23 days
NAICS: 811310
New
SLED
Electrical & Automation Services
Solicitation # 9181
The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.
City Of Denton

POSTED

about 18 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

about 19 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

Solicitation W911S820R0011 is a request for quotes issued by the MICC Joint Base Lewis McChord for the annual inspection, service, testing, and maintenance of various Self Contained Breathing Apparatus (SCBA) equipment. The scope of work includes the maintenance of MSA G1 face pieces, SCBA units, Rapid Intervention Team rescue systems, air cylinders, escape bottle regulators, confined space air carts, and air reservicing compressors. The base period of performance runs from August 10, 2020, to August 9, 2021, with multiple option years extending the potential performance through August 9, 2024. The contractor is responsible for providing all necessary materials and testing equipment. Parts costing $200 or less are included in the service, while any repairs or parts exceeding $200 require a detailed cost estimate and approval from the Contracting Officer. Repairs between $201.01 and $2,500.00 are to be processed via government credit card. Additionally, the contractor must submit annual manpower reports through the designated secure data collection site by October 31 of each calendar year.

General Info

Contract Value

$124,692.83

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

WA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Jb Lewis-Mc Chord
Contacts1 person available
OfficeJOINT BASE LEWIS MCCH, WA, 98433-9500, USA
Office AddressJOINT BASE LEWIS MCCH, WA, 98433-9500, USA
Contacts
Marketplace Support

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W911S820R0011 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of $7.50M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-08-03 13:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work. The MICC Joint Base Lewis McChord requires the following items, Purchase Description Determined by Line Item, to the following: Base Period of Performance: 08/10/2020 - 08/09/2021 LI 001: ANNUAL INSPECTION, SERVICE, TESTING AND MAINTENANCE (ISTM) OF FACE PIECES (MSA G1): The contractor shall plan, manage, and execute scheduled Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.1 Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 164, EACH; LI 002: SCBA ANNUAL INSPECTION,SERVICE AND MAINTENANCE (MSA G1 SCBA): The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement(PWS), Part 5 Specific Tasks, para 5.5.2. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 115, EACH; LI 003: ANNUAL INSPECTION SERVICE AND MAINTENANCE OF MSA G1 RAPID INTERVENTION TEAM (RIT) RESCUE SYSTEMS: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.8. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 8, EACH; LI 004: AIR CYLINDER SERVICE: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.3. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 172, EACH; LI 005: ESCAPE BOTTLE REGULATORS: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement(PWS), Part 5 Specific Tasks, para 5.5.4. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 4, EACH; LI 006: INSPECT, SERVICE AND TEST CONFINED SPACE AIR CART: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01, 2, EACH; LI 007: ANNUAL INSPECTION & SERVICE AIR RESERVICING COMPRESSOR, STATIONARY AND MOBILE: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5, Specific Tasks, Para 5.5.7. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 3, EACH; LI 008: ANNUAL COMPRESSOR SERVICE AND QUARTERLY AIR SAMPLING AND RECALIBRATION TEST : The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.6. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 12, EACH; LI 009: CONTRACT MANPOWER REPORT: The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the JBLM DES Fire Department via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http:// www.ecmra.mil/. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk at help desk at: http://www.ecmra.mil/., 1, EACH; Option 1 Period of Performance: 08/10/2021 - 08/09/2022 LI 001: ANNUAL INSPECTION, SERVICE, TESTING AND MAINTENANCE (ISTM) OF FACE PIECES (MSA G1): The contractor shall plan, manage, and execute scheduled Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.1 Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 164, EACH; LI 002: SCBA ANNUAL INSPECTION,SERVICE AND MAINTENANCE (MSA G1 SCBA): The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement(PWS), Part 5 Specific Tasks, para 5.5.2. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 115, EACH; LI 003: ANNUAL INSPECTION SERVICE AND MAINTENANCE OF MSA G1 RAPID INTERVENTION TEAM (RIT) RESCUE SYSTEMS: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.8. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 8, EACH; LI 004: AIR CYLINDER SERVICE: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.3. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 172, EACH; LI 005: ESCAPE BOTTLE REGULATORS: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement(PWS), Part 5 Specific Tasks, para 5.5.4. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 4, EACH; LI 006: INSPECT, SERVICE AND TEST CONFINED SPACE AIR CART: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01, 2, EACH; LI 007: ANNUAL INSPECTION & SERVICE AIR RESERVICING COMPRESSOR, STATIONARY AND MOBILE: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5, Specific Tasks, Para 5.5.7. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 3, EACH; LI 008: ANNUAL COMPRESSOR SERVICE AND QUARTERLY AIR SAMPLING AND RECALIBRATION TEST : The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.6. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 12, EACH; LI 009: CONTRACT MANPOWER REPORT: The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the JBLM DES Fire Department via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http:// www.ecmra.mil/. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk at help desk at: http://www.ecmra.mil/., 1, EACH; Option 2 Period of Performance: 08/10/2022 - 08/09/2023 LI 001: ANNUAL INSPECTION, SERVICE, TESTING AND MAINTENANCE (ISTM) OF FACE PIECES (MSA G1): The contractor shall plan, manage, and execute scheduled Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.1 Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 164, EACH; LI 002: SCBA ANNUAL INSPECTION,SERVICE AND MAINTENANCE (MSA G1 SCBA): The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement(PWS), Part 5 Specific Tasks, para 5.5.2. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 115, EACH; LI 003: ANNUAL INSPECTION SERVICE AND MAINTENANCE OF MSA G1 RAPID INTERVENTION TEAM (RIT) RESCUE SYSTEMS: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.8. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 8, EACH; LI 004: AIR CYLINDER SERVICE: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.3. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, hydrostatic testing and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 172, EACH; LI 005: ESCAPE BOTTLE REGULATORS: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement(PWS), Part 5 Specific Tasks, para 5.5.4. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 4, EACH; LI 006: INSPECT, SERVICE AND TEST CONFINED SPACE AIR CART: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01, 2, EACH; LI 007: ANNUAL INSPECTION & SERVICE AIR RESERVICING COMPRESSOR, STATIONARY AND MOBILE: The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5, Specific Tasks, Para 5.5.7. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 3, EACH; LI 008: ANNUAL COMPRESSOR SERVICE AND QUARTERLY AIR SAMPLING AND RECALIBRATION TEST : The contractor shall plan, manage, and execute scheduled maintenance and repair of specified equipment as defined in the Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.6. Contractor shall include all parts, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. See quantity and service requirements listed in Technical Exhibit #1 and 2 of the Statement of Work. Contractor shall include all parts costing $200 or less, materials and testing equipment necessary to perform required scheduled service, repair, and inspection. Parts necessary to bring the equipment back to mission capable status costing $201.00 or more requires a cost estimate to include, but not limited to, labor rate, labor hours, and parts or materials used and shall be sent to the Contracting officer prior to commencing additional work. All repairs costing $201.01 or more shall include all costs other than materials, such as travel time, overhead, equipment, and profit. Repairs costing more than $201.01 and less than $2,500.00 will be paid for utilizing the government credit card., 12, EACH; LI 009: CONTRACT MANPOWER REPORT: The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the JBLM DES Fire Department via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http:// www.ecmra.mil/. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk at help desk at: http://www.ecmra.mil/., 1, EACH; Option 3 Period of Performance: 08/10/2023 - 08/09/2024 LI 001: ANNUAL INSPECTION, SERVICE, TESTING AND MAINTENANCE (ISTM) OF FACE PIECES (MSA G1): The contractor shall plan, manage, and execute scheduled Performance Work Statement (PWS), Part 5 Specific Tasks, para 5.5.1 Contractor shall include all parts costing $200 or...

More opportunities from Department Of Defense → W6QM Micc-Jb Lewis-Mc Chord

Same awarding agency

NAICS: 488111
New
Federal
Fort Bliss Air Traffic Control Services
Solicitation # W911S826RA015
Solicitation W911S826RA015 is a Request for Proposal for non-personal Air Traffic Control (ATC) services at Fort Bliss, Texas, issued by the Department of Defense. The contractor is responsible for providing all project management, supervision, and personnel to operate a non-approach control tower and an Airspace Information Center (AIC). The primary objective is to ensure the positive and procedural separation of Instrument Flight Rules, Visual Flight Rules, and Unmanned Aircraft System aircraft within delegated airspace. This is a total small business set-aside under NAICS code 488111, utilizing a Firm Fixed Price pricing arrangement. The contract structure includes a base period and four option years, with performance spanning from April 2027 through March 2032. Services are divided into multiple shifts, including weekday, weekend, and federal holiday coverage, as well as site management and phase-out tasks. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, evaluating an operational approach, staffing plan, personnel qualifications, and past performance. Proposals must be submitted in three separate volumes, with a strict 30-page limit for the technical volume. Operational requirements include adherence to OSHA standards and strict security protocols for handling Controlled Unclassified Information and Secret facility clearances. The contractor must manage specific deliverables, including quality control plans, training records, and sUAS incursion reporting. Performance is monitored via a Quality Assurance Surveillance Plan and a Performance Requirements Summary. Invoicing is conducted electronically through the Wide Area WorkFlow system.
Air Traffic Control

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 813110
Federal
JBLM Catholic Priest Services
Solicitation # PANMCC26P0000044249
The contractor is responsible for providing a fully qualified, ordained Catholic Priest endorsed by the Archdiocese for the Military Services, USA, to deliver all religious services required at Joint Base Lewis-McChord, including regular and special Masses, sacraments, and confessions, in full alignment with the teachings and protocols of the Roman Catholic Church and the AMS Priests’ Manual. The Priest must have faculties granted by the AMS Archbishop and will act as the sole authoritative subject matter expert on all Catholic matters at the installation, even without military authority, advising government chaplaincy personnel and ensuring compliance with Army Regulation 165-1, Army Pamphlet 165-18, and local installation policies. All services, staffing, equipment, supplies, and logistical support are the contractor’s responsibility, except for government-furnished property and services. The position is part of a total small business set-aside under NAICS code 813110, with the solicitation number PANMCC26P0000044249 and a posted date of June 2, 2026. The contract will be performed at North Lakewood, Washington, near Joint Base Lewis-McChord, with the primary point of contact being Nathan Bassett and secondary contact Jason McCormick. Only priests directly contracted and endorsed by the AMS are permitted; third-party endorsements are prohibited. The Priest must maintain conformity with the AMS’s religious instruction standards and serve as the designated Catholic religious expert to the Department of Defense chaplaincy team, ensuring the spiritual needs of the Catholic community are met in accordance with ecclesiastical and military guidelines.
Religious Organizations

POSTED

5 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS