Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity was posted on July 26, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J--OPTION - Stationary Pressure Washer Maintenance and Repair

Awarded
UNAWRD-17-Q-ST01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation, operator of the Earle C. Clements Job Corps Center in Morganfield, Kentucky, is soliciting bids for the clutch replacement of a Kubota M8200 tractor equipped with front wheel assist and no cab or loader. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and disengagement and confirming the unit is fully operational under load. This is a fee-for-service solicitation based on a lump sum bid, with award determined by best value. Interested offerors must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, proof of insurance, and any applicable SBA certification letters by November 3, 2026. The contract is set aside for small businesses and incorporates various Federal Acquisition Regulation clauses regarding equal opportunity, minimum wage standards under Service Contract Labor Standards, and restrictions on foreign purchases. Contractors must also comply with strict security and confidentiality protocols regarding non-public information and government facilities.
Earle C. Clements Job Corps Center

POSTED

about 6 hours ago

DEADLINE

in 3 days
NAICS: 811310
New
SLED
Asphalt Storage Tank Maintenance and Repair
Solicitation # 601320000072188
The Texas Department of Transportation (TxDOT) issued Invitation for Bid (IFB) 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes the cleaning of tanks, installation of new manway gaskets and other necessary seals, and the off-site transport and disposal of all removed materials in compliance with Texas Health and Safety Code Chapter 361. All work must be performed according to manufacturer recommendations and applicable standards, with a final inspection required by a TxDOT representative prior to invoicing. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Euna Procurement portal. To be considered, bidders must provide a comprehensive submission including a price schedule in Excel format, qualifications and references, a detailed approach to work, and a mandatory child support obligation certification. TxDOT will award the contract based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. Eligible vendors must maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System and provide insurance from companies with an A.M. Best rating of A- or better.
Texas Department of Transportation

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

1 day ago

DEADLINE

in 22 days
NAICS: 811310
New
SLED
Electrical & Automation Services
Solicitation # 9181
The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.
City Of Denton

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

Solicitation UNAWRD-17-Q-ST01 is an invitation for bids issued by the MICC Joint Base Lewis-McChord for the maintenance and repair of 16 stationary pressure washers. This small business set-aside requirement includes a one-year base period from August 1, 2017, to July 31, 2018, with two subsequent one-year option periods. The scope of work involves semi-annual maintenance, minor repairs, winterization services, and the provision of labor and materials for extraordinary repairs exceeding 50 dollars, which require prior approval from the Contracting Officer's Representative. Additionally, the contractor is responsible for submitting an annual Contract Manpower Report. Bids must be submitted electronically via FedBid.com, where the government intends to conduct a competitive reverse auction. To be considered responsive, offerors must provide individual pricing for each contract line item and ensure quotes remain valid for 30 days following the closing date. The government will utilize a lowest-price technically acceptable evaluation method, awarding the contract to the responsible offeror with the lowest price who meets all technical requirements and possesses acceptable or neutral past performance.

General Info

Agency

N/A

Contract Value

$83,415

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Not specified

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

Combined Synopsis

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
ContactsNo contacts available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is UNAWRD-17-Q-ST01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 811192 with a small business size standard of $7.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-07-26 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Joint Base Lewis-McChord, WA 98433 The MICC Joint Base Lewis McChord requires the following items, Meet or Exceed, to the following: Base Period of Performance: 08/01/2017 - 07/31/2018 LI 001: Scheduled Maintenance & Repair. Contractor to perform semi-annual maintenance, minor repairs, and winterization services on 16 pressure washers. The intended contract period is a one-year base period plus two one-year option periods. SEE PWS PART 5 AND SUPPORTING ATTACHMENTS., 32, Each; LI 002: Extraordinary Pressure Washer Repair/Installation Parts/Materials. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a fully burdened cost estimate, detailed bill of materials for repair for approval by the COR prior to the contractor proceeding with the work., 1, Job; LI 003: Extraordinary Pressure Washer Repair/Installation Parts/Materials. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a fully burdened cost estimate, detailed bill of materials for repair for approval by the COR prior to the contractor proceeding with the work. Extraordinary Pressure Washer Repair/Installation Labor. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a detailed cost estimate to include fully burdened labor rate and estimated hours for repair for approval by the COR prior to the contractor proceeding with the work., 1, Job; LI 004: Contract Manpower Report (CMR). Prepare an annual CMR as required by the Office of the Assistant Secretary of the Army., 1, EA; Option 1 Period of Performance: 08/01/2018 - 07/31/2019 LI 001: Scheduled Maintenance & Repair. Contractor to perform semi-annual maintenance, minor repairs, and winterization services on 16 pressure washers. The intended contract period is a one-year base period plus two one-year option periods. SEE PWS PART 5 AND SUPPORTING ATTACHMENTS., 32, Each; LI 002: Extraordinary Pressure Washer Repair/Installation Parts/Materials. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a fully burdened cost estimate, detailed bill of materials for repair for approval by the COR prior to the contractor proceeding with the work., 1, Job; LI 003: Extraordinary Pressure Washer Repair/Installation Labor. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a detailed cost estimate to include fully burdened labor rate and estimated hours for repair for approval by the COR prior to the contractor proceeding with the work., 1, Job; LI 004: Contract Manpower Report (CMR). Prepare an annual CMR as required by the Office of the Assistant Secretary of the Army., 1, EA; Option 2 Period of Performance: 08/01/2019 - 07/31/2020 LI 001: Scheduled Maintenance & Repair. Contractor to perform semi-annual maintenance, minor repairs, and winterization services on 16 pressure washers. The intended contract period is a one-year base period plus two one-year option periods. SEE PWS PART 5 AND SUPPORTING ATTACHMENTS., 32, Each; LI 002: Extraordinary Pressure Washer Repair/Installation Parts/Materials. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a fully burdened cost estimate, detailed bill of materials for repair for approval by the COR prior to the contractor proceeding with the work., 1, Job; LI 003: Extraordinary Pressure Washer Repair/Installation Labor. Contingent upon the need arising for a pressure washer assembly repair or installation outside of the semi-annual maintenance schedule or with a total cost greater than $50. The contractor shall provide a detailed cost estimate to include fully burdened labor rate and estimated hours for repair for approval by the COR prior to the contractor proceeding with the work., 1, Job; LI 004: Contract Manpower Report (CMR). Prepare an annual CMR as required by the Office of the Assistant Secretary of the Army., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Joint Base Lewis McChord intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Joint Base Lewis McChord is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (+1 (555) 000-0000) or via email at contact@example.gov. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (+1 (555) 000-0000) or contact@example.gov of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. For solicitation with multiple CLINs, each individual CLIN shall be priced and submitted on FEDBID. Pricing for multiple CLINs shall not be aggregated into one line item. Quotes received without individually priced CLINs will be deemed non-responsive and will not be considered. CLINs with $0 dollar shall be identified as NO CHARGE. Quotes must use ATTACHMENT A - REPAIR PARTS LIST as a reference when developing the cost pricing for their proposals. The REPAIR PARTS LIST details the maximum amount the Government will expend for parts. In accordance with FAR 19.102(b), the small business size standard is applied by classifying the product or service being acquired in the industry whose definition, as found NAICS Manual, best describes the principal nature of the product or service being acquired. The NAICS code selected for this acquisition is (000000, DESCRIPTION) with an applicable small business size standard of ($Mil or # Employees). The Contracting Officer (KO) at Mission and Installation Contracting Command, Joint Base Lewis-McChord is the only person authorized to approve changes or modify any of the requirements under this solicitation, and notwithstanding anything contained elsewhere in this solicitation, the said authority remains solely with the KO. In the event the Contractor or contractor employee effects any such change at the direction of any person other than the KO, the change will be considered to have been without authority, and no adjustment will be made in the price of any subsequently awarded contract under the Changes clause or any other clause to cover any increase in costs incurred as a result thereof. If an interested party have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also officially protest to the contracting officer. Contract award or performance is suspended during the protest. To be timely, protests must be filed within the periods specified in FAR 33.103. If an interested party has complaints or want to file a protest it must be sent to the address below: Mission and Installation Contracting Command Chief, Supply and Small Services Branch BOX 339500, MS 19 JBLM, WA 98433-9500 Facsimile number +1 (555) 000-0000 If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number +1 (555) 000-0000 or 8875 Packages sent by FedEx or UPS should be addressed to: [contract number] HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures. Quotes MUST be valid for 30 days after Request for Quote/solicitation’s closing date. Questions concerning this solicitation must be submitted at least 5 days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. Contact contact@example.gov or call 1-877-9FEDBID to address any questions for quotes utilizing FedBid. Quotes must be submitted per unit price. Multiple awards will not be made; therefore, quotes that cover less than all the items and quantities in this solicitation will be rejected and deemed non-responsive. In order to enhance the efficiency of the procurement process, the Government intends to evaluate only the lowest priced quote to determine if the quote is technically acceptable and whether the vendor has acceptable or neutral past performance. If the lowest priced quote is reasonably priced and technically acceptable and the vendor has acceptable or neutral past performance, the Government intends to make an award to that vendor and no other quote will be evaluated. If the lowest priced offer is not technically acceptable, the vendor does not have acceptable or neutral past performance, or both, then the Government will evaluate the second lowest priced quote for technical acceptability and acceptable or neutral past performance. This method will continue until the lowest priced, technically acceptable quote, by a vendor with acceptable or neutral past performance, is determined. Quotes will be evaluated based on price and technical acceptability. Quoter/Offeror certifies that the product quoted meets or exceeds all minimum requirements as stated in the Request for Quotes. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS