J -- TF33 HPT Blades

OC-ALC/LPKPA TINKER AFB OK 73145-3015, SOL FA8104-04-R-0276. For additional information contact Billie Kindschuh/LPKPA/+1 (555) 000-0000. A firm fixed-price Requirements type contract is contemplated with one basic year and 2 (two) option years for repair of TF33 HPT blades. Line Item 0001: Test and Check: NOUN: TF33 HPT Fan Blade (2 Blade Set) Input/Output NSN: 2840-01-411-0982RV, P/N: 780831. BEQ as follows: 2465 sets Basic Year, 2200 sets Option Year I, 2200 sets Option Year II. Line Item 0002: Repair: NOUN: TF33 HPT Blade (2 Blade Set) Input/Output NSN 2840-01-411-0982RV, P/N: 780831. BEQ as follows: 2465 sets Basic Year, 2200 sets Option Year I, 2200 sets Option Year II. Line Item 0003: Repair: NOUN: TF33 HPT Blade (2 Blade Set) Input/Output NSN: 2840-01-167-9602RV, P/N: 800231. BEQ as follows: 2215 sets Basic Year, 390 sets Option Year I, 390 sets Option Year II. Line Item 0004: Repair: NOUN: TF33 HPT Blade (2 Blade Set) Input/Output NSN: 2840-01-150-7416RV, P/N: 529441. BEQ as follows: 2215 sets Basic Year, 390 sets Option Year I, 390 sets Option Year II. Line Item 0005: G009 Data Reporting 1 Lot. This Line Item is NOT SEPARATELY PRICED. Applicable to: TF33 Engine. Destn: Tinker Air Force Base OK 73145-3032. IPE quantity of 10 each sets of TF33 HPT Blades may be required. Delivery: Item 0001: To Be Determined per month starting 30 days ARO and receipt of reparable assets for all years. Quantity will be determined by the number of blades that are sold against Line Item 0001 and do not require repair under Line Item 0002. Line Item 0002: 1,000 sets per month starting 30 days ARO and receipt of reparable assets for all years. Line Item 0002 quantity will be adjusted according to quantity of blades passing Line Item 0001. Description: TF33 HPT blades are approximately 4 inches in length and has a tapered chord length ranging from 1.2 inches at the root to 0.9 inches near the blade tip. The blade also has approximately a 45-degree angle of twist from root to tip. Turbine blades are matched by weight in sets of two in order to obtain a balanced assembly. All TF33 engines have 130 HPT blades (65 sets of 2 blades). Function: As the initial turbine stage directly following the combustion section, the primary function of the first stage turbine blades is to drive the high speed (10th through 16th stages) compressor. Also known as the high-speed turbine. The first stage turbine serves to move the high pressure, high temperature gases from the combustion chamber to subsequent low speed turbine stages. Qualification requirements: Sources must be qualified prior to being considered for award. Qualification requirements are not available for this acquisition. These qualification requirements apply to line item(s) 0001 through 0004. The approximate solicitation issue date is 06 JUL 2004 and the estimated solicitation response date will be 06 AUG 2004. Electronic procedures will be used for this solicitation through FedBizOpps at http://www.eps.gov/. Approved Sources are Chromalloy Gas Turbine Corp. Midwest City, OK 73110-7900; Flight Support Inc. North Haven, CT 06473-3606, Dynatech Turbine Services Inc. San Antonio, TX 78217-2892; United Technologies Corp. DBA Pratt & Whitney Div Military Engines East Hartford, CT 06108-0968. All responsible sources solicited may submit a bid, proposal, or quotation that shall be considered. Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Please contact: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 in writing for further information concerning the source approval process. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/LPKPA, Tinker AFB OK 73145-3015, FAX Number +1 (555) 000-0000. Request for Written Proposal will be posted to FedBizOpps. See Note (s) 23.