Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

JAR, SPECIMAN

Active
SPE2DH-26-T-5633Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

UNIT 2497 CP 011 496 371 46 2418, APO, AE, 09094-3219, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
JAR,SPECIMAN
JAR, SPECIMEN, PREFILLED, FORMALIN, 10 PERCENT<(>,<)> SHALL BE AN
IMPACT-RESISTANT, CLEAR POLYPROPYLENE
JAR, PREFILLED WITH 10% NEUTRAL, PHOSPHATE
BUFFERED. SHALL HAVE A WIDE MOUTH WHICH SHALL
PROVIDE EASY ACCESS TO SPECIMENS. SHALL BE
SUPPLIED WITH A LEAKPROOF RIBBED CAP, WHICH SHALL
BE EASY TO OPEN/CLOSE WITH WET HANDS OR GLOVES.
60ML, 50S
.
UNIT OF ISSUE PACKAGE (50 EA/PG)
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-554-3502 Quantity: 1 PG Purchase Request: 7017656206QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
WIPER, LABORATORY
Solicitation # SPE2DH-26-T-5661
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7M1-26-T-243D
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-241U
The contract pertains to the procurement of a fluid filter element with NSN 4330-01-531-4301 and part number 659304, under solicitation SPE7M1-26-T-241U. Fifty-one units are required to be delivered FOB origin within 63 days of contract award, with a strict zero percent variance allowed in quantity. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements, and all technical and quality standards from the DLA Master List take precedence over any other specification. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents as defined by NAVSEA; portable devices containing mercury must include a shockproof design and a secondary containment barrier consistent with NAVSEA 5100-003D. The contract reference includes the DLA unit of issue, and all compliance must align with the DLA Master List version in effect on the solicitation issue date. The contract was posted on July 30, 2026, with responses due by August 10, 2026, and the point of contact is Michael Reese of the Department of Defense, Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, FLUID PRE
Solicitation # SPE7L4-26-T-5902
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-241G
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-240H
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
Federal
Military Frame Jacks and Adapter Sets
Solicitation # W911S226U3892
The contract solicitation for Military Frame Jacks and Adapter Sets, issued under solicitation number W911S226U3892, seeks small business suppliers to provide specialized equipment designed for lifting and supporting military vehicles using frame jacks coupled with bumper adapter kits. This combined solicitation is set aside entirely for small businesses under the SBA program, with the NAICS code 333998 indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The U.S. Army’s Office at Fort Drum, New York, is the contracting activity under the Department of Defense, and the point of contact for inquiries is Troy Boardman, reachable via phone or email. Proposals must be submitted by the deadline of August 6, 2026, at 4:00 PM EDT, and while the office is located in Fort Drum, the place of performance is designated to zip code 54656, suggesting delivery or installation may occur at a specific military facility in Wisconsin. All responses must meet technical and compliance requirements for military-grade durability, compatibility, and safety standards to support vehicle maintenance operations in field and garrison environments.
W6QM Micc-Ft Drum

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
Federal
Metal Dump Carts for Watervliet Arsenal
Solicitation # W911PT26QA112
Ten metal dumping chip carts with a 27 cubic foot capacity, part number 256 by CECORE, are being procured under solicitation W911PT26QA112 for the Watervliet Arsenal in New York. Each cart includes the 8XQ 8-inch caster package and TH750 trunnion hardware, with freight costs covered as part of the contract. The opportunity is a Small Business Set Aside, indicating exclusive eligibility for small businesses under NAICS code 333998, and is managed by the Department of Defense through the W6QK Acc Wva office. Proposals must be submitted by August 13, 2026, at 8:00 PM Eastern Time, with the point of contact for inquiries being Evan Caulfield, reachable at 518-266-4813 or evan.j.caulfield.civ@army.mil. The place of performance is confirmed as Watervliet, New York, with delivery expected to this location.
W6QK Acc Wva

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
AX Pick Head Manufacturing and SupplyThe contract seeks the manufacture or sourcing of a military-spec AX PICK HEAD with NSN 4210-01-653-2182, requiring full compliance with Defense Logistics Agency standards covering technical specifications, quality control protocols, and accurate identification marking. All delivered units must meet stringent defense-grade requirements to ensure performance, durability, and traceability in operational environments. The work must be performed in accordance with established DLA guidelines, with emphasis on precision engineering and adherence to documented material and finish criteria. This is a subcontract opportunity under NAICS code 333998, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The place of performance is designated as FPO, ZIP 96675-9600, indicating delivery to a military postal location. The contract is managed by the Department of Defense under the Construction & Equipment MRO SVC I office, with no set-aside designation specified. All proposals must be submitted through the DIBBS portal using the referenced solicitation link, and suppliers are expected to demonstrate proven capability in producing certified military hardware with full documentation trail for inspection and audit readiness.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
BEAKER, LABORATORY
Solicitation # SPE2DH-26-T-5611
The contract specifies the procurement of 107 laboratory beakers made of polypropylene with a capacity of 600 mL, identified by NSN 6640-00-889-1834, under solicitation SPE2DH-26-T-5611. All items must comply with Specification A-A-51326 dated 23 January 1986 and adhere to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. Packaging must meet commercial standards as defined in the procurement document, with each unit securely sealed in a container that prevents damage or breakage, and all shipments packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible cost to the delivery point in New Cumberland, PA, 17070-5002. Labeling must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard can be obtained through DLA Troop Support. The contract also includes provisions for covered defense information, DLA packaging requirements, and the removal of government identification from non-accepted supplies. The response deadline is August 5, 2026, with a delivery requirement of 29 days after award, and the point of contact is Tina Vu of the Department of Defense Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7L1-26-T-890F
The contract is for the procurement of a fluid filter element identified by NSN 4330150144194 and part number 5801415504 from IVECO DEFENCE VEHICLES S.P.A., under solicitation SPE7L1-26-T-890F, which is a total small business set-aside. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). The contract specifies a quantity of 106 units with no variance allowed, to be delivered FOB origin within 98 days of contract award, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) at a unit price of $106.00, totaling $11,236.00. The original required delivery date is September 5, 2026, with a needed ship date of November 17, 2026. Transportation and shipping are governed by DLAD procedural notes C19 and C20, and all documentation must reference the authorized DoD unit of issue. The solicitation, issued by the Department of Defense's Land Supply Chain, has a response deadline of August 10, 2026, with Katherine Woods as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1526
The contract is for the procurement of 10 units of TIE DOWN, CARGO, VEHICLE with NSN 3990-01-412-1518 and part number 3100207G019-008 from KINEDYNE LLC, under solicitation SPE8EF-26-T-1526. Delivery is required within 20 days from the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in strict compliance with ASTM D3951, while also adhering to the more stringent DLA Master List of Technical and Quality Requirements, MIL-STD-129 marking and labeling guidelines, and DLA packaging standards outlined in RP001. Palletization must follow DLA-specific requirements, and shipments must be sent via traceable means—parcel post is prohibited. The delivery address and marking instructions are designated to W90D5M at 155 Bruce Drive, Dickson TN 37055-0248, with the original required delivery date set for July 24, 2026. The unit of issue is each, with a total price of $10.00 per unit, and the item falls under NAICS code 333998. Technical and quality standards referenced in the DLA Master List take precedence over all other specifications, and configuration changes or deviations require formal engineering change proposals or variance requests. Government use metadata, including project codes and distribution identifiers, are embedded for internal tracking.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 336413
New
DIBBS
TRAINING AID, HEMOSTATI
Solicitation # SPE2DH-26-T-5665
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, TRANSPORT, TH
Solicitation # SPE2DH-26-T-5677
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
STOOL, DENTAL OPERATING
Solicitation # SPE2DH-26-T-5650
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
METER, PH
Solicitation # SPE2DH-26-T-5656
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
MOUTH BARRIER, MANIKIN,
Solicitation # SPE2DH-26-T-5673
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BOTTLE, SCREW CAP
Solicitation # SPE2DH-26-T-5652
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5679
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
ETCH, BONDING AGENT, DEN
Solicitation # SPE2DH-26-T-5669
The contract specifies the procurement of Ultra-Etch 4PK Kit, a viscous 35% phosphoric acid gel dental bonding agent, with each package containing four 1.2 mL syringes and twenty blue micro tips, totaling six packages as ordered. The product must have a minimum shelf life of 48 months, with no more than seven months elapsed between the date of manufacture and delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear labeling with the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. Units must be sealed in protective containers and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest rate to the specified delivery point in Suffolk, VA. The material must be marked per DLA’s Medical Marking Standard, and bidders are required to provide the source and part number. The acquisition is governed by DLA’s Master List of Technical and Quality Requirements, with applicable provisions including packaging standards and the potential handling of covered defense information. Delivery is required within five days after award, and the solicitation number is SPE2DH-26-T-5669, with a response deadline of August 6, 2026.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISH, CULTURE, PETRI
Solicitation # SPE2DH-26-T-5655
The contract specifies the procurement of disposable sterile petri dishes and culture dishes, identified by NSN 6640010313139 and part number D1937, supplied by Cardinal Health 200, LLC under solicitation SPE2DH-26-T-5655. The unit of issue is one package (PG), equivalent to 100 individual units, with a total quantity of one package required. Delivery must be made within 20 days to San Antonio, Texas, under FOB destination terms with no允许 variance in quantity, and inspection and acceptance occur at the point of delivery. Packaging must comply with Commercial packaging standards as outlined in DLA Packaging Requirements RP001, requiring each unit to be sealed within a protective container and shipped in commercial exterior containers suitable for safe transit at the lowest available carrier rate. All items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and the materials must not contain intentionally added mercury or mercury compounds except as specifically permitted for functional applications like batteries, lamps, or calibrated instruments, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item is not regulated by the FDA, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with applicable revisions determined by the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST KIT, COLOR
Solicitation # SPE2DH-26-T-5672
The contract specifies the procurement of a color test kit designed for medical use, with a measurement range of 0 to 100 units, packaged in a plastic case along with color viewing tubes, a stopper, and a comparator box. Each unit must be sealed in a protective container that prevents damage or breakage and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest cost to the designated delivery point. All items must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and markings must align with the latest edition of this standard, which is accessible through DLA Troop Support. The item is not regulated by the FDA and is identified by NSN 6630-01-026-4528 and part number HACH COMPANY 91224 P/N 2234-00. The unit of issue is each (EA), with a delivery quantity of one unit required within five days, delivered FOB destination, with zero variance allowed in quantity. Inspection and acceptance occur at the delivery point, and packaging must meet MIL-STD-2073-1E requirements. The contract is issued under solicitation SPE2DH-26-T-5672 with a response deadline of August 6, 2026, and performance is scheduled for Herlong, California, with Tina Vu as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics & Delivery to Fort Bliss (FOB Destination)The contract requires the transportation and delivery of blood collecting units to Building 2527 on Chaffee Road at Fort Bliss, Texas, under FOB Destination terms, meaning the supplier assumes all responsibility and risk until the goods are delivered and accepted at the specified location. The delivery must be completed within 20 days of the contract award, and inspection of the units will occur upon arrival at the destination to ensure compliance with quality and quantity requirements. This is a subcontract under the NAICS code 484220, which classifies it as a truck transportation service, and it is managed by the Medical Supply Chain FSH under the Department of Defense. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, and all deliveries must reach the designated site at Fort Bliss, TX 79918-2527 to satisfy contractual obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 5 days
View Details