This Solicitation opportunity from Illinois was posted on June 13, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
DOCX, High priority: read this firstspecifications
HighAI Summary for 253-60-01 V Plow Super Tandem Specifications: Technical specifications and bidder questionnaire for a heavy-duty V-type snowplow for use on super tandem axle trucks for the Illinois Department of Transportation (IDOT), dated December 2021. The document details construction requirements (U.S. Domestic steel), moldboard dimensions, push frame configuration, hitch specifications, powder coat finish standards, and delivery requirements. Bidders must complete the questionnaire and provide a warranty and descriptive literature with their bid.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 255-60-01 Heavy Duty Underbody Scraper Specifications: Technical specifications and bidder questionnaire dated October 2022 for the procurement of a Heavy Duty Underbody Scraper for the Illinois Department of Transportation. The document details requirements for the moldboard, circle assembly, hydraulic actuation, finish, and installation services, requiring bidders to certify compliance for each technical section.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1003A Tollway Combination 11FT Flat Sided and Flat Floor Dump-Spreader: Technical specifications for a 11-foot flat-sided and flat-floor combination dump/spreader body for single axle dump trucks used by the Illinois State Toll Highway Authority. The document details minimum material requirements (primarily 304L or 201 stainless steel), dimensions, conveyor chain assembly, and spinner assembly requirements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1003 Tollway Single Axle Dump Truck Specifications: Technical specifications for the procurement of a new Single Axle Dump Truck with a 240-gallon pre-wet system for the Illinois State Toll Highway Authority. The document details minimum requirements for the engine, chassis, cab, and electrical systems, including specific GVWR, horsepower, and corrosion protection standards.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1008 Tandem Axle Dump Truck Specifications: Technical specifications for the procurement of a new Tandem Axle Dump Truck with a 390-gallon pre-wet system, 14-foot radius dump/spreader body, and reversible snow plow for the Illinois State Toll Highway Authority. The document details minimum requirements for the engine, chassis, frame reinforcement, transmission, and braking systems.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1013 Tollway Tandem Axle 6X6 Dump Truck Specifications: Technical specifications for a Tandem Axle 6X6 Dump Truck with a 540-gallon pre-wet system, 14-foot radius dump/spreader body, and reversible snow plow for the Illinois State Toll Highway Authority. The document details minimum requirements for the engine, cab, chassis, and braking systems, specifying a 58,000 lbs GVWR and Cummins X12 engine or equal.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1014A - 20' Snow Plow Wing Specifications: Technical specifications for a heavy-duty 20-foot snow plow wing moldboard. The document details the boxed design of the moldboard, the trailing link front post for floating over rough roads, the rear wing post/mount, and the double-acting hydraulic push arm requirements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1014B - 8' Mid-Mount Junior Wing Specifications: Technical specifications for an 8' mid-mount junior wing plow for tandem axle trucks. The document details requirements for the Monroe Model MJW-8 (or equivalent), including trailing link style wing posts, Kuper Tuca SX carbide inserts, hydraulic flow control valves, and LED wing tip lighting.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for 5012-850-1014 Super Tandem Axle Dump Truck Specifications: Technical specifications for a Super Tandem Axle Dump Truck with a 540-gallon pre-wet system, 15-foot radius dump/spreader body, and reversible snow plow for the Illinois State Toll Highway Authority. The document details minimum requirements for the engine, chassis, frame reinforcement, transmission, and braking systems.
DOCX
DOCX, High priority: read this firstifb
HighAI Summary for B-41660 IFB JPMC Dump Trucks: An Invitation for Bid (IFB) issued by the Illinois Department of Central Management Services to establish a Joint Purchase Master Contract for the procurement of single axle, tandem axle, and super tandem axle dump trucks and accessories. The contract is intended for use by the State, governmental units, and qualified not-for-profit agencies, with an expected annual value exceeding $50,000 and an initial term of three years.
PDF
PDF, High priority: read this firstq-and-a
HighAI Summary for B-41660 JPMC Dump Trucks Questions and Answers: A Questions and Answers document dated 07/22/2024 for the Illinois Department of Central Management Services (CMS) solicitation B-41660 regarding JPMC Dump Trucks. The document clarifies technical specifications for chassis, warranties, and equipment, and announces that the bid opening date has been extended to August 8, 2024.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT 36” High Polymer Moldboard Snowplow Specifications: Technical specifications and bidder questionnaire dated July 2022 for a 36-inch high, polymer, reversible trip-type snowplow for the Illinois Department of Transportation (IDOT). The document details material requirements (U.S. Domestic steel), polymer thickness and strength, moldboard dimensions, rib construction, and structural reinforcements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Crew Cab, Single Axle, Dump Truck Specifications: Technical specifications and bidder questionnaire dated October 2022 for the State of Illinois Department of Transportation (IDOT). The document details requirements for a Crew Cab, Single Axle Dump Truck used in highway maintenance, including chassis capacity, frame requirements, front axle/suspension, air brake systems, and steering specifications.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Expressway Type Reversible Compression Trip Snowplow Specifications: Technical specifications and bidder questionnaire dated July 2022 for the State of Illinois Department of Transportation (IDOT). The document details construction requirements for an Expressway type, reversible, compression trip snowplow with high discharge, including moldboard dimensions, material standards, rib spacing, and trip mechanism requirements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Heavy-Duty One-Way Snowplow Specifications and Questionnaire: Technical specifications and bidder questionnaire dated July 2022 for a heavy-duty one-way, full trip type snowplow with a 6x6 hitch adapter for the Illinois Department of Transportation (IDOT). The document details construction requirements using U.S. Domestic steel, moldboard dimensions (12' length), vertical and horizontal ribbing, trip mechanism requirements, and LED marker specifications.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Heavy-Duty One-Way Trip Type Snowplow Specifications: July 2022 technical specifications and bidder questionnaire for a heavy-duty one-way, full trip type snowplow (12' cutting edge) for use on tandem axle trucks operated by the Illinois Department of Transportation (IDOT). The document details construction requirements, including U.S. domestic steel, moldboard dimensions, vertical/horizontal ribbing, landslide plates, and compression spring trip mechanism specifications.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Heavy-duty Truck Mounted Benching Wing Plow Specifications: October 2022 technical specifications and bidder questionnaire for the procurement of installed Heavy-duty Truck Mounted Benching Wing Plows for the Illinois Department of Transportation. The document details requirements for the moldboard assembly, cutting edges, hydraulic wing posts, push-arm braces, and installation standards for 56-58,000 lb. G.V.W.R. tandem-axle trucks.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT High-Moldboard Snowplow Specifications and Questionnaire: Technical specifications and bidder questionnaire dated July 2022 for a high-moldboard trip type, reversible snowplow with extended discharge chutes, designed for 6x6 tandem axle trucks used by the Illinois Department of Transportation (IDOT). The document details construction requirements, including U.S. domestic steel, moldboard dimensions, rib configurations, and compression spring trip requirements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT High-Moldboard Trip Type Reversible Snowplow Specifications: July 2022 technical specifications and bidder questionnaire from the Illinois Department of Transportation (IDOT) for a high-moldboard trip type, reversible snowplow with extended discharge. The document details construction requirements, including U.S. Domestic steel certification, moldboard dimensions, rib spacing, and material thicknesses, and requires bidders to certify compliance for each technical requirement.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT High-Moldboard Trip Type Reversible Snowplow Specifications: Technical specifications and bidder questionnaire dated July 2022 for a high-moldboard trip type, reversible snowplow with extended discharge chutes, designed for use on 6x6 tandem axle trucks operated by the Illinois Department of Transportation (IDOT). The document details construction requirements, including U.S. domestic steel usage, moldboard dimensions, rib configurations, and compression spring trip requirements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT High-Moldboard Trip Type Reversible Snowplow Specifications: Technical specifications and bidder questionnaire (dated July 2022) for a high-moldboard, reversible, full trip snowplow with extended discharge for the Illinois Department of Transportation (IDOT). The document details construction requirements, including U.S. domestic steel usage, moldboard dimensions, rib spacing, and material thicknesses, and requires bidders to certify compliance for each technical requirement.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Hydraulic Front Conveyor Specifications and Questionnaire: July 2022 technical specifications and bidder questionnaire for a hydraulic-powered front conveyor used for spreading salt, rock, and shoulder materials on 15’ All-Season IDOT dump trucks. The document details requirements for the conveyor belt, drive system, reversing valve, spinner assembly, and warranty, and requires bidders to certify compliance for each item.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Liquid Salt Applicator Specifications and Questionnaire: Technical specifications and bidder questionnaire for a liquid salt applicator (single axle dump) for the Illinois Department of Transportation, dated April 2021. The document details requirements for the tank, skid frame, plumbing, and boom system, including specific materials (stainless steel), capacities, and pump performance standards.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Liquid Salt Applicator (Tandem Axle 13’ Dump) Specifications: Technical specifications and bidder questionnaire dated April 2021 for a liquid salt applicator used in Illinois Department of Transportation pavement maintenance. The document details requirements for the tank (1,850 gal capacity), stainless steel skid frame, plumbing, centrifugal pump, and boom spray system, including a compliance checklist for bidders.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Mid-Mount Truck Wing Plow Specifications: Technical specifications and bidder questionnaire dated October 2022 for the procurement of Mid-Mount Truck Mounted Wing Plows for the Illinois Department of Transportation. The document details requirements for the moldboard assembly, cutting edges, front post, hydraulic cylinders, valves, push arms, installation, and lighting/camera systems.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Mid-Rear Wing Scraper Combo Specifications: October 2022 technical specifications and bidder questionnaire for a combination Mid-Rear Mount Truck Mounted Wing Plow and Heavy-Duty Under-body Scraper for the Illinois Department of Transportation. The document details requirements for the moldboard assembly, cutting edges, front post, hydraulic cylinders, valves, and installation for use on T65 and T68 trucks.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Single Axle Dump Truck Specifications and Questionnaire: Technical specifications and bidder questionnaire for a Single Axle Dump Truck with a 240-Gallon Pre-wet System for the Illinois Department of Transportation (IDOT), dated October 2022. The document details requirements for the chassis, axle weight ratings, frame construction, braking systems, and steering, requiring bidders to certify compliance for each technical component.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Spreader Mounted Roller Mill Spinner Assembly System Specifications: Issued October 2022 by the Illinois Department of Transportation, this document provides detailed technical specifications and a compliance questionnaire for a Spreader Mounted Roller Mill Spinner Assembly System for 13-foot RDS style dump bodies. It includes requirements for the upper chute, main frame, rollers, spinner assembly, 400-gallon tank, and mandates for training, service manuals, and warranties.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Stainless Steel Dual Spinner Material Spreader Specifications: Technical specifications and bidder questionnaire dated October 2022 for the State of Illinois Department of Transportation (IDOT). The document details requirements for under-the-tailgate, gear reduction driven, stainless steel material spreaders for snow and ice control, including specific requirements for dual spinners, hydraulic interlock devices, and an 'easy cleanout' trough design.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Stainless Steel Fixed Dual Spinner with Chutes Specifications: Technical specifications and bidder questionnaire (dated October 2022) for the State of Illinois Department of Transportation regarding under-the-tailgate, gear reduction driven spreaders for snow and ice control. The document details requirements for hydraulic-powered dual spinners, stainless steel construction (201 austenitic), hydraulic interlock safety devices, and 'easy cleanout' trough designs.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Stainless Steel Under-the-Tail-Gate Material Spreader Specifications: Technical specifications and bidder questionnaire dated October 2022 for the procurement of stainless steel, under-the-tailgate, gearbox-driven material spreaders for the Illinois Department of Transportation (IDOT). The document details requirements for hydraulic interlock devices, material composition (201 austenitic stainless steel), feed trough dimensions, and 'easy cleanout' design features.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Super Tandem Axle Dump Truck Specifications: Technical specifications and bidder questionnaire dated October 2022 for the State of Illinois Department of Transportation (IDOT). The document details requirements for a Super Tandem Axle Dump Truck featuring a 15-foot All Season Body and a 540 Gallon Pre-wet System, including specific chassis, axle, brake, and frame requirements for highway maintenance operations.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Super Tandem Axle Dump Truck W/15’ Body Specifications: Technical specifications and bidder questionnaire dated October 2022 for the procurement of a Super Tandem Axle Dump Truck with a 15-foot body and 240-gallon pre-wet system for the Illinois Department of Transportation. The document details critical requirements for the chassis, axle weight ratings, frame reinforcement, braking systems, and suspension to ensure performance in adverse highway maintenance conditions.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Tandem Axle Dump Truck (13' Body) Specifications: Technical specifications and bidder questionnaire dated October 2022 for a Tandem Axle Dump Truck with a 13-foot body and 240-gallon pre-wet system for the State of Illinois Department of Transportation. The document details chassis requirements, axle capacities, frame specifications, braking systems, and suspension standards necessary for highway maintenance operations.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for IDOT Truck Mounted Hydraulic Powered Broom Specifications: October 2022 technical specifications and bidder questionnaire for a truck-mounted, hydraulic-powered rotary sweeping broom for the Illinois Department of Transportation. The document outlines minimum requirements for broom width (10'), brush diameter (32'), caster wheels, mounting hardware for snowplow hitches, and warranty terms. It requires bidders to complete a compliance questionnaire and provide descriptive literature with their bid.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for T57-60-01 Crew Cab 4x4 Single Axle Dump Truck Specifications: Technical specifications and bidder questionnaire dated October 2022 for a Non-CDL Crew Cab 4x4 Single Axle Dump Truck for the State of Illinois Department of Transportation. The document details requirements for chassis capacity (23,000 lbs GVWR), frame, suspension, braking, electrical systems, and LED lighting for highway maintenance operations.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for T68-60-01AS Tandem Axle Dump Truck Specifications: Technical specifications and bidder questionnaire dated October 2022 for the State of Illinois Department of Transportation. The document details requirements for a Tandem Axle Dump Truck featuring a 13-foot All Season Body and a 540 Gallon Pre-wet System, including detailed chassis, axle, suspension, and brake system requirements.
DOCX
DOCX, High priority: read this firstspecifications
HighAI Summary for T70-60-01 Tandem Axle 6x6 Truck Specifications: Technical specifications and bidder questionnaire dated October 2022 for the State of Illinois Department of Transportation. The document details requirements for a 6x6 drive tandem axle truck with a 15-foot all-season spreader body, including specific chassis, axle, suspension, and braking system requirements for heavy snow removal operations.
XLSX
XLSX, Low priorityother
LowAI Summary for B-41660 JPMC Dump Trucks Certified Vendor List 061124: A certified vendor directory dated June 11, 2024, listing Minority Business Enterprise (MBE) certified companies, their contact information, certification details, and associated NIGP commodity codes for various equipment and services.
DOCX
DOCX, Low priorityindustry-day
LowAI Summary for B-41660 JPMC Dump Trucks Pre-Bid Conference Information: Notice for a Pre-Bid Conference regarding procurement B-41660 for JPMC Dump Trucks, scheduled for 07/09/2024 at 11:00 AM CST. The meeting aims to explain procurement requirements and the Business Enterprise Program (BEP) goals (1% goal identified). Includes Webex and telephone access details for potential bidders.
DOCX
DOCX, Low priorityother
LowAI Summary for IPG Active Registered Vendor Disclosure: A vendor disclosure form for entities with an active registration in the Illinois Procurement Gateway (IPG). The document requires certification of registration, disclosure of lobbyists, current/pending state contracts, and taxpayer identification information.
PDF
PDF, Low priorityother
LowAI Summary for State of Illinois BEP/VBP Utilization Plan V.24.1: Version 24.1 of the State of Illinois Business Enterprise Program (BEP) and Veterans Business Program (VBP) Utilization Plan. This document provides the framework and forms for bidders to commit to and document the participation of certified minority, women, and veteran-owned businesses in a procurement, including participation agreements and good faith effort (GFE) documentation.
DOCX
DOCX, Low priorityother
LowAI Summary for State of Illinois Blank Vendor Disclosures (v.24.1): A standard vendor disclosure form for the State of Illinois, used by bidders not registered in the Illinois Procurement Gateway (IPG). It collects business information, IDHR Public Contracts numbers, and certifications regarding the authority to transact business in Illinois.
PDF
PDF, Low priorityother
LowAI Summary for Vendor Instructions: Export/Upload Items Feature: A technical instructional guide for vendors on how to use the Export/Upload Items feature within the BidBuy platform to manage and upload pricing for large numbers of line items via CSV files.
AI Contract Breakdown
Uniform Contract Format
Sign up to view the full breakdown with detailed analysis of each section.
Timeline
1 update
PhaseClosed
Posted
Solicitation
Deadline changed
Response deadline changed from Aug 15, 2024 to Jul 30, 2024.
Response Deadline
Deadline has passed
Submission Closed
Find active opportunities like this
Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.
CMS, in agreement with the Chief Procurement Officer for General Services (CPO-GS), desires to establish a joint purchase master contract for the purchase of single axel, tandem axle, super tandem axle dump trucks and accessories.
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award