Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

KLS Martin Request for Information

Active
KLS_Martin_RFIFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency Troop Support is issuing a sources sought notice to identify vendors capable of providing KLS Martin cranial and maxillofacial procedural packages. These packages must include all necessary implants, instrumentation sets, and ancillary accessories required for orthopedic surgery, and all products must be FDA approved. The selected vendor must support three specific delivery methods: Just-In-Time, Direct Vendor Delivery, and Consignment. Requirements include providing qualified representatives for on-site technical guidance and 24/7 technical support. This is a Request for Information and does not guarantee a future solicitation or award. Interested parties must submit their responses in PDF format to Rose Schofield by September 25, 2026.

General Info

DLA Troop Support seeks vendors for FDA approved KLS Martin cranial maxillofacial packages.

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Philadelphia, PA, 19111, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Troop Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5092, USA
Organization / Agency
Department Of Defense → DLA Troop Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5092, USA
Contacts
Rose Schofield

Full Description

Show more

This is a sources sought notice.


The Defense Logistics Agency (DLA) Troop Support is seeking sources capable of providing KLS Martin cranial and maxillofacial (CMF) "procedural packages". The vendor must be capable of supplying these “procedural packages” including the implants, instrumentation sets and ancillary accessories that are necessary for the physician to perform orthopedic surgery.


All products must be Food and Drug Administration (FDA) approved.


The products that make up the “procedural packages” must be delivered Just-In-Time (JIT), Direct Vendor Delivery (DVD) and Consignment. Under the JIT delivery method, the Medical Treatment Facility (MTF) calls the manufacturer’s field representative who carries the products into the MTF just-in-time for the surgery. The manufacturer’s sales representative may bring many sizes and types of implants and other auxiliary products to the surgery along with the instrumentation sets. Under the DVD method an order for products is placed through ECAT and the products are delivered directly to the customer via any transportation carrier. Under the consignment method a Medical Treatment Facility (MTF) will have the products that make up the “procedural package” consigned to their facility. At the request of the MTF’s, the manufacturer is required to have a qualified representative on site at the MTF’s within the timeframe specified by the facility necessary to meet their requirements. The manufacturer’s representative’s provides technical advice and guidance to the physician’s before, during and after implantation. Furthermore, technical support is available twenty-four (24) hours a day, seven (7) days a week. This is a Request For Information (RFI) and does not commit the U.S. Government to issue a solicitation, make an award or pay any costs associated with responding to this announcement. All submitted information shall remain with the U.S. Government and will not be returned.


Your response to this RFI shall be submitted electronically in PDF format and emailed to rose.schofield@dla.mil

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-348K
Solicitation SPE2DS-26-T-348K, issued by the DLA Troop Support Medical Supply Chain, is for the procurement of radiopaque surgical gauze sponges. The required items are white gauze measuring 4 inches in width by 8 inches in length, provided in packages of 800 units. The total quantity requested is 3 packages under NSN 6510-00-116-1285. These medical devices are regulated by the FDA and must be delivered to designated locations, including Joint Base Charleston, South Carolina, and Fort Bragg, North Carolina. The contract specifies a total shelf life of 36 months, with a requirement that no more than 5 months elapse between the date of manufacture and the date of delivery to the government. Packaging must be commercial and include sealed unit containers and suitable exterior shipping containers. Marking and labeling must strictly adhere to Medical Marking Standard No. 1 and the latest revision of MMSIA, superseding MIL-STD-129. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must be registered in SAM.gov and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. The solicitation is categorized under NAICS code 339113 and requires quotes to be submitted via the DLA Internet Bid Board System.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339113
New
DIBBS
WATER QUALITY ANALYSIS
Solicitation # SPE2DH-26-T-6030
Solicitation SPE2DH-26-T-6030, issued by the DLA Troop Support Medical Supply Chain, is a request for quotations for four water quality analysis sets under NSN 6630-01-641-1591. These economical portable labs must be capable of monitoring chlorine (0-3.4 mg/L), nitrate (0-40 mg/L), and total coliforms and E. coli via the presence-absence method. Each set must include all necessary chemistry testing reagents, a portable incubator, thermometer, glassware, and a pocket pro pH and TDS tester. The items are required to have a minimum shelf life of 12 months, with no more than two months having elapsed from the date of manufacture to the date of delivery. The contract specifies that delivery is required by August 18, 2026, to the Distribution Management Office at Camp Kinser, Japan, with inspection and acceptance occurring at the destination. Packaging must be commercial and compliant with MIL-STD-2073-1E, while marking must adhere to Medical Marking Standard No. 1. Bidders are required to specify the source and part number being supplied and must provide Safety Data Sheets for any hazardous materials prior to award. Payment and receiving reports are to be processed through the Wide Area Workflow system. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

NAICS: 333310
New
Federal
Water Modification Kit
Solicitation # 4610-01-699-8815
DLA Troop Support is conducting market research to identify qualified manufacturers capable of supplying the Water Modification Kit with NSN 4610-01-699-8815, focusing on items with the same form, fit, and function as the existing specification. This Sources Sought Notice is not a solicitation, and the government has no obligation to award a contract based on responses. Interested vendors must complete a market survey detailing their manufacturing capabilities, commercial sales history, delivery timelines, pricing structures, EDI capacity, and warranty terms, and submit it via email to Marco.Rollo@dla.mil no later than close of business on July 24, 2026. The annual estimated requirement is 3,509 KT, with deliveries expected FOB Origin and inspection performed at the destination in Susquehanna, Pennsylvania. The North American Industry Classification System code is 333310, indicating the focus is on other commercial and service industry machinery manufacturing. Vendors must be registered in SAM.gov, and only commercial items will be considered, with no military specifications cited in the current notice. While no formal contract clauses, evaluation factors, or packaging standards are included, the survey gathers information to determine the feasibility of a future Definite Quantity Contract. Pricing, quantities, and award criteria will be established only if a solicitation is issued, which will be announced on SAM.gov. No compensation or reimbursement is provided for responses, and all information submitted remains the property of the respondent unless otherwise utilized in a subsequent procurement.
Commercial and Service Industry Machinery Manufacturing

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 339999
New
Federal
SOURCES SOUGHT NOTICE FOR NSN: 6920-01-164-9625
Solicitation # 6920-01-164-9625
The Defense Logistics Agency is conducting market research through a Sources Sought Notice for the National Stock Number 6920-01-164-9625, seeking industry input on the capability to produce a Mannequin Target. This notice is not a solicitation and does not obligate the government to make a purchase. Interested contractors must evaluate the technical specifications, including design exceptions such as a color deviation referencing Specification Drawing 9363146, a dimensional tolerance of ±.03 for two-place decimals on Drawing 11829332, and packaging requirements following MIL STD 129 with boxes labeled as the unit of issue. Quality control standards have been updated to require MIL-STD-1916 for product acceptance in place of MIL-STD-105, with verification levels set at VL III for major characteristics and VL II for minor ones, and MIL-C-46168 has been superseded by MIL-DTL-53039E ECP H12I3002. The Technical Data Package includes multiple referenced drawings and quality assurance plans with varying revision dates, some extending into future years, indicating ongoing documentation updates. The notice mandates responses by September 8, 2026, to be submitted to Manuel De La Hoz via email, with no compensation offered for responses; any future solicitation would be posted on SAM.gov for public access.
All Other Miscellaneous Manufacturing

POSTED

6 days ago

DEADLINE

in 13 days
View Details