Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

KMU-473 KITS

Active
W912JD-16-Q-2020Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The 101st Base Contracting Office at Bangor ANGB, Maine, plans to award a firm-fixed-price sole source contract to Gentex Corporation, located in Rancho Cucamonga, California, for the procurement of KMU-473 kits. This decision is based on a formal justification for other than full and open competition in accordance with FAR 6.305, recognizing Gentex as the sole provider of the required product. Although this notice is not a solicitation, interested parties who believe their products match the government's requirements may submit information for consideration. The procurement falls under NAICS code 315990, with a size standard of 500 employees. The government retains sole discretion in deciding not to compete this acquisition. The contract will be awarded by the Department of Defense’s W7NC Uspfo Activity in Bangor, ME, with performance also located there. For inquiries or further details, the designated points of contact are Jason M. Edwards, Base Contracting Officer, and Lynn M. Libby, Purchasing Agent. Relevant information, including the complete justification, has been made available with this notice to ensure transparency in the sole-source procurement process.

General Info

Bangor AFB awards sole-source fixed-price contract to Gentex for KMU-473 kits procurement.

Agency

Department Of Defense → W7NC Uspfo Activity Meang 101View Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

BANGOR, ME, 04401, USA

Set-Aside

NONE

Documents

(1)

Single_Source_-Absence_of_Competition_Memorandum_signed.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7NC Uspfo Activity Meang 101
Contacts2 people available
OfficeBANGOR, ME, 04401-8005, USA
Organization / Agency
Department Of Defense → W7NC Uspfo Activity Meang 101
View Agency Profile
Office AddressBANGOR, ME, 04401-8005, USA
Contacts
Jason M. EdwardsBase Contracting Officer
Lynn M LibbyPurchasing Agent

Full Description

Show more
Sole-Source Justification & Approval The 101st Base Contracting Office, Bangor ANGB, ME intends to award a sole source commercial contract to Gentex Corporation at 9859 7TH ST, Rancho Cucamongo, CA 91730-6026. The requirement is for the acquisition of KMU-473 kits. The contract will be firm-fixed price. The purpose of this special notice is to make available the Justification for Other than full and open competition pursuant to FAR 6.305. This is not to be construed as a solicitation, however if you provide products that you feel meet the exact needs of what the Government intends to purchase you may provide notice to the Government for review. Currently, the Government recognizes a single product that is available and intends to award a contract on a sole-source basis to Gentex, Corporation in the amount of XXX. A determination by the government not to compete this requirement is solely within the discretion of the government. The NAICS for this acquisition is 315990. The size standard is 500employees. For further information the justification is attached to this notice. For questions, inquiries, or to speak to the cognizant agent handling the purchase of the requirement, contact SSgt Lynn Libby at lynn.m.libby.mil@mail.mil.

Similar Contracts

Same NAICS industry code

NAICS: 315990
New
DIBBS
DPAS-Rated Order Fulfillment SupportThe contract titled DPAS-Rated Order Fulfillment Support establishes an internal process and supply chain capability to ensure that orders rated under the Defense Priorities and Allocations System are given priority over commercial work, as required by Clause H18. This subcontract is issued under a Total Small Business Set-Aside, specifically targeting small businesses as defined by the SBA, with the NAICS code 315990 indicating a focus on other textile product mills. The Department of Defense, through its ASC Commodities Division, is seeking vendors capable of reliably integrating DPAS priority handling into daily operations to support national defense requirements without compromising commercial commitments. The solicitation is open for responses until August 3, 2026, with the posting date set for July 23, 2026. The place of performance and organizational details are not specified, but the requirement is tied directly to the vendor's ability to modify internal workflows, inventory allocation, and production scheduling to ensure DPAS-rated tasks are completed first. Compliance with this clause necessitates transparent tracking systems, employee training, and documented procedures to validate priority execution. This subcontract is critical to maintaining operational readiness within the defense logistics chain and demands proven experience in managing prioritized government contracts under strict regulatory frameworks.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
FACESHIELD, RIOT CONTROThe contract specifies the procurement of 110 units of Face Shield, Riot Control, part number DK5-X.250AF with NSN 8415-01-514-8856, issued under solicitation SPE1C1-26-T-1550 by the Department of Defense through C and T Supply Chain. The unit price is $110.00 per unit, totaling $12,100, with delivery required within 20 days to Fort Bragg, North Carolina, under FOB Destination terms. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing specifications over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is non-hazardous, commercial packaging per ASTM D3951 is acceptable only if not superseded by DLA requirements; if hazardous, Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001, and shipment must use traceable means, excluding parcel post. The cybersecurity requirement mandates a CMMC Level 2 self-assessment, and covered defense information protocols are active. The delivery must be completed by July 24, 2026, and shipping instructions direct delivery to Building Y5015, MMD Blvd, Fort Bragg, NC. All packaging and documentation must reflect the specified unit of issue, quantity per unit pack, and government tracking identifiers including the M/F code W58VRR62020001 and project code TP 3.
C AND T SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
PLUGThis contract, issued under solicitation number SPE8E6-26-T-3858 by the Defense Logistics Agency through Depot Oklahoma, calls for the procurement of 40 units of a plug item identified by NSN 4240-01-380-4949 and part number 7000029584 from 3M Company, used to seal facepiece ports to enable masks to operate in airline mode. The total contract value is $1,600 at a unit price of $40.000, with delivery required 55 days after award, no later than July 31, 2026, delivered FOB origin to Tinker Air Force Base, Oklahoma. The contract strictly mandates compliance with multiple military and federal standards: all packaging must adhere to MIL-STD-129 for marking and labeling, and individual items must be permanently marked per MIL-STD-130N for Unique Item Identification. Non-hazardous materials must be commercially packaged in accordance with ASTM D3951, but this is subordinate to the DLA Master List of Technical and Quality Requirements, which takes precedence; hazardous materials must be packaged under TQ Requirement IP025 as defined by FED-STD-313 and labeled per OSHA’s Hazard Communication Standard. Palletization is governed by RP001, DLA’s Packaging Requirements for Procurement. The inspection and acceptance occur at the destination, and all shipments must be tracked using WAWF for invoicing and receiving reports. The contract imposes stringent transportation requirements, including a prohibition on foreign-flag vessels unless a formal waiver is granted 45 days prior to shipment, supported by documented efforts to secure U.S.-flag alternatives. Contractors must submit Safety Data Sheets pre-award, fully compliant with 29 CFR 1910.1200, and disclose UEI and CAGE codes if providing covered defense telecommunications equipment. Compliance with numerous DFARS and FAR clauses is mandatory, including those related to combating trafficking, employment eligibility verification, sustainable products, whistleblower rights, information disclosure, and restrictions on compensation for former DoD officials. The contract includes deviations from standard clauses and requires offerors to affirm small business status, socioeconomic certifications, and adherence to all technical, packaging, and safety specifications as outlined in referenced standards and DLA directives, with failure to comply potentially resulting in disqualification or contract rejection.
DEPOT OKLAHOMA

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
HAZMAT EQUIPMENT, SPThis contract, identified by solicitation number SPE8E9-26-T-3244, solicits HAZMAT EQUIPMENT, SPECIAL from NEW PIG CORPORATION under part number WPL265-10 and NSN 4240014388790, with a quantity of 94 units. The item is classified as a Critical Application Item with a Type I shelf life of 60 months, non-extendable, and must comply with MIL-STD-130N for identification marking and MIL-STD-129 for packaging and marking. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservative treatment type 10, dry storage, and container code D3, while palletization follows DLA Packaging Requirements. The contract incorporates technical and quality standards referenced by R or I numbers from the DLA Master List, and all supplies must be marked according to special code 32 indicating shelf-life compliance. Removal of government identification from non-accepted supplies is required per RQ011. Delivery is FOB origin with no variance permitted in quantity, and inspection and acceptance occur at the destination. The required delivery date is 43 days from contract award, with an original delivery target of September 19, 2026, and a need ship date of September 16, 2026. The shipping destination for all deliveries is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with transportation governed by DLAD Proc Notes C19 and C20. The contract applies to simplified acquisition procedures, with the applicable revision of the DLA Master List determined by the solicitation issue date, and the unit of issue is PR as defined in the DLA authorized unit of issue standards. All hazardous materials packaging and shipping must meet IP025 requirements. The point of contact is Matthew Kruc, and the procurement falls under NAICS code 315990 with the Department of Defense as the contracting agency.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
COVERALLS, TYVEKThe contract specifies the procurement of 50 units of Tyvek coveralls with hood, elastic wrists, and booties, identified by part number GEN-24165 and cage code 3BXL5, with a secondary part number 44428 and cage code 3X069 from Lakeland Industries Inc and Genesis Disposables LLC. The coveralls must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any commercial standards. Each coverall must be individually labeled with a paper tag made of bleached sulfate paper weighing 100 pounds, featuring a smooth finish suitable for thermal transfer and direct printing, with a hole for attachment via fastener. The tag must display a 13-digit National Stock Number (NSN) and a 12-digit Universal Product Code (UPC) assigned by the government, both in high-density barcode format, clearly visible when folded and packaged, and positioned to avoid damaging the item. The UPC must also appear on all shipping cartons. Barcodes must be fully scannable, with human-readable text present; omissions or illegibility constitute critical defects. Packaging must follow MIL-STD-129 and DLA’s RP001 standards, with non-hazardous items packed per ASTM D3951 unless overridden by DLA requirements. Hazardous items, if applicable, must meet TQ requirement IP025 per FED-STD-313. Label types must conform to MIL-DTL-32075, Type VII for plastic bagged items and Type VIII for bundled or individual items. Items must be palletized as specified and shipped FOB destination within five days of contract award. The delivery point is Joint Expeditionary Base Little Creek-Fort Story, Virginia Beach, and the shipment must use traceable freight methods—parcel post is prohibited. The required delivery date is July 27, 2026, with zero variance allowed in quantity, and inspection and acceptance occur at destination. The contract number is SPE1C1-26-T-1551, the NSN is 8415-01-436-8854, and the point of contact is Shane Moore.
C AND T SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
LANYARD, EJECTION SEThe solicitation SPE4A6-26-R-XB64 seeks a lanyard for ejection systems with NSN 1670-01-068-4200 under an IDIQ contract structure, with a maximum aggregate value of $350,000 across all delivery orders. The contract requires compliance with strict packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including CAGE codes, part numbers, lot and serial numbers, and special labeling for production lot samples. Barcoding is mandatory, and preservation follows Method 33 with controlled drying conditions. Delivery is governed by a tiered schedule: production units and PLT samples due 120 days after receipt of order, Government evaluation within 50 days, and final delivery within 30 days, totaling a 380-day timeline with an official government requirement of 275 days ARO. FOB terms are destination, with deliveries to various CONUS stock locations managed by DLA Aviation and Maritime. Inspection occurs at the contractor’s site for FAT and PLT, while acceptance occurs at the government’s destination point. The solicitation enforces a comprehensive set of FAR and DFARS clauses covering small business set-asides with Alternate I of 52.219-6, equal opportunity for veterans and workers with disabilities, labor and trafficking protections, environmental controls including prohibitions on hexavalent chromium and toxic materials, and cybersecurity mandates such as antiterrorism training and restrictions on network access to certain websites. Offerors must complete representations regarding small business status, UEI and CAGE codes, and any use of covered telecommunications equipment. Evaluation is based on past performance—weighted most heavily and dominated by historical quality and delivery compliance—followed by cost or price and quoted delivery schedule, with award determined through a best-value trade-off, not LPTA. All invoicing must be submitted via WAWF, and contractual administration relies on DoDAACs for payment processing without pre-filled financial or personnel details. Deviations to contract clauses are permitted under clause 52.252-6, and the contract allows for multiple delivery orders over a five-year period.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 315990
New
DIBBS
HOSE, NONMETALLICThe contract specifies the procurement of a 6-foot nonmetallic hose with NSN 4720-01-007-1940 under solicitation SPE7M4-26-T-277S, with a delivery requirement of 246 days after award. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the Qualified Products List or Qualified Manufacturers List applies since this item is designated as a primary QPL/QML. The hose must not contain mercury or mercury-containing compounds except in specific functional exceptions such as batteries, fluorescent lamps, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, and any portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. The supplier is required to provide a Certificate of Quality Compliance for each manufacturing lot, fully aligned with the Supplemental Quality Assurance Provision, and must make an electronic copy available via the iRAPT system as an attachment to the Receiving Report. For government-inspected contracts, the certificate must be available for review at the time of material acceptance and may be signed off through WAWF upon proper documentation upload. Covered defense information provisions apply, and any configuration changes or deviations require an Engineering Change Proposal. The contract falls under NAICS code 315990 and is managed by the Department of Defense’s Fluid Handling Division, with performance located in Tracy, California.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → W7NC Uspfo Activity Meang 101

Same awarding agency

NAICS: 236220
New
Federal
Maine Air National Guard Fuel Cell Hangar ConstructionThe Maine Air National Guard is soliciting sealed bids for the construction of a 42,374 square foot Fuel Systems Maintenance Hangar at Bangor Air National Guard Base, Maine, under solicitation W50S8326BA001. This is a firm fixed-price contract set aside 100% for small businesses, with a NAICS code of 236220 and a size standard of $45,000,000. The project requires the full provision of labor, materials, equipment, tools, transportation, supervision, and all other resources necessary to build a permanent facility including a Fuel System Maintenance bay, shop space, and dirty/clean transition areas, in compliance with DoD Unified Facilities Criteria, ANGH 32-1084, and antiterrorism/force protection standards. Key components specified include Sargent Manufacturing Company locks, Honeywell Niagara-AX controls, Armstrong acoustical ceiling tiles, Monaco fire alarm systems, and Sherwin Williams paint. The contract duration is 670 calendar days from the notice to proceed, inclusive of inspection and punch list completion. The bid opening has been extended to July 28, 2026, and offerors must be registered in SAM.gov, possess a valid CAGE code and UEI, and submit annual representations and certifications electronically through SAM. Amendments to the solicitation have removed the mandatory Project Labor Agreement requirement, incorporated FAR 52.223-2 for biobased product procurement, and updated the Davis-Bacon wage decision to ME20260051, Mod 1. The plumbing division has been amended to include Table II for pressure piping materials, and attachments 2 through 6 have been revised accordingly. Evaluation will be based solely on lowest price, with CLINs 0001 through 0005 forming the base bid and CLIN 0006 (satellite parking) treated as an additive item considered only if all base bids are below the Independent Government Estimate. The Contracting Officer Representative will conduct inspection and acceptance via WAWF, with payment contingent on conformance to specifications and successful inspection. Contractors must comply with all security protocols including HSPD-12 and FIPS PUB 201 identity verification, obtain necessary security clearances prior to work commencement, and maintain adequate protection against theft and vandalism. Performance and payment bonds are required under FAR 52.22
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in 1 day
View Details