Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

KNOB

Active
SPE7L1-26-T-917LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 249 units of a knob identified by NSN 5355-00-559-8943 under solicitation number SPE7L1-26-T-917L, with a response deadline of August 17, 2026, and a delivery requirement of 136 days after award. All items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA packaging guidelines, and any non-accepted supplies must have government identification removed. Contractors are required to retain supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be approved unless explicitly permitted by the specification. Items must be free of asbestos, and previously listed asbestos-containing codes or part numbers are no longer acceptable; any alternative materials require approval under Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supply Chain, with performance taking place in Jacksonville, Florida, and the primary point of contact is Kristie Fown.

General Info

Procure 249 knob units NSN 5355-00-559-8943, deliver in 136 days, comply with DLA standards, no asbestos or ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-917L DLA Land and Maritime Aug 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristie Fown
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KNOB
KNOB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 CONDITIONS FOR NSN/Part Number: 5355-00-559-8943 Quantity: 249 EA Purchase Request: 7017601692QTY: 249 Delivery: 136 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7M2-26-T-5996
This contract, identified by solicitation number SPE7M2-26-T-5996, specifies the procurement of 175 knobby items with NSN 5355-01-033-2742 under full and open competition. All supplies must comply with DLA’s Packaging Requirements and technical quality standards referenced in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds except for specified functional applications such as batteries, fluorescent lights, and certain instruments, which must include secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned entirely, and any substitute materials require prior approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with plastics avoided for wrapping, cushioning, or dunnage whenever possible. Palletization follows DLA packaging standards, and items must be identified with MIL-STD-130N markings per NASM91528 and NASM3926 specifications. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at stringent levels. Delivery is FOB origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date 161 days from order and a need ship date of January 26, 2027. Inspection and acceptance occur at destination, with no variance permitted in quantity. The contract mandates compliance with all applicable DoD standards and specifies David Larsen as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-26-T-3853
This contract specifies the procurement of a nonmetallic special shaped section, supplied on a 25-foot coil, with a required delivery quantity of 17 feet to be delivered within five days to Fort Hood, Texas. The item is identified by NSN 9390-01-179-4508 and purchase request number 7017745767, with a unit price of $17.00 per foot and a total price based on the contracted quantity. The product is classified as a critical application item, and its packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129. Plastic wrapping, cushioning, or dunnage is to be avoided whenever possible, and packaging must prevent distortion during shipping and storage. Shipment must be made via traceable freight methods, excluding parcel post, and directed to a designated warehouse facility at Fort Hood. The contract incorporates all technical and quality requirements referenced by R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin with a 10% quantity variance allowed on the upper end and zero on the lower end, with inspection and acceptance occurring at the destination. The item is covered by defense information and subject to restrictions on government identification removal, and all markings and shipping documentation must align with specified codes and protocols.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3827
The contract involves the procurement of 86 units of filament, additive M, under solicitation SPE8E5-26-T-3827, with a delivery requirement of 167 days from the award date and a mandatory delivery point of origin. The material is identified by NSN 9330-01-696-5540 and must be supplied by MATTHERACKERS, INC. with part number M-V12-08E7, conforming to reference drawing 5B5M3 11B5190923 Revision A dated 07/06/2022. Strict packaging requirements mandate heat-sealed vapor bags with desiccant to prevent moisture absorption, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA packaging standards. Any box with a short quantity must be labeled with a red X and “SHORT BOX” and placed on top of the pallet. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and the required ship date is February 1, 2027, though the original required delivery date was December 25, 2026. Technical and quality requirements are governed by the DLA Master List, and configuration change management procedures apply to materials from Edgewood Chemical Biological Center. Transportation details follow DLAD Proc Notes C19 and C20, and the unit of issue is each (EA), aligned with ANSI X12 standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3854
The contract specifies the procurement of a nonmetallic special component with dimensions and shape compliant with Lockheed-Georgia standards, manufactured to meet Lockheed Standard Material Specification STM 23-402 Class 1 Grade 50. The item is subject to strict export control under either ITAR or EAR regulations, prohibiting any transfer, including disclosure to foreign persons regardless of location, without explicit authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this technical data, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and approved access through the DLA questionnaire process. The item carries NSN 9390-00-055-4369 with a quantity of 67 LG units, and delivery is required within 167 days after award. The solicitation, identified as SPE8E5-26-T-3854, was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 327999. Performance will occur at Robins AFB, Georgia, with Nafis Beyah designated as the primary point of contact. The contractor must maintain CMMC Level 2 certification as verified by a certified third-party assessment organization.
WARNER ROBINS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E9-26-T-3306
This contract specifies the procurement of a nonmetallic special shaped section compliant with ASTM D2000 M 3 BE 610 A14 E014 F19 material standards, supplied in white color with a unit length of 10 feet. The total quantity ordered is 754 feet under purchase request 7017758063, with delivery required within 89 days after award. The item is identified by NSN 9390-00-603-7358 and is part of a solicitation issued by the Department of Defense through the Construction & Equipment MRO Service I office, with performance required at Tinker AFB, Oklahoma. The solicitation number is SPE8E9-26-T-3306, posted on August 5, 2026, with responses due by August 17, 2026. The contract incorporates technical and quality requirements from the DLA Master List, enforces DLA packaging standards, and mandates strict compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. The supplier must be a CMMC Level 2 certified third-party assessment organization, and all data handling must adhere to DFARS 252.225-7048. The solicitation is a federal procurement under NAICS code 327999, with Matthew Kruc listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
TAPE, REFLECTIVE
Solicitation # SPE8E5-26-T-3784
Reflective tape in red, 6 inches wide, is being procured under contract SPE8E5-26-T-3784 with a total quantity of 158 rolls, each containing 1,800 inches of material, for a total length of 284,400 inches. The unit of issue is RO (roll), and delivery is required within 61 days after the order, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous under FED-STD-313, in which case IP025 applies. All packaging and palletization must adhere to DLA’s RP001 requirements, and the DLA Master List of Technical and Quality Requirements supersede all other standards. The tape must meet TDP Rev A Gen 1 per ASTM D4956-19, with verification sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, where unspecified attributes are treated as major and acceptance requires zero non-conformances. The NSN is 9390009518833, and the procurement is under a Women-Owned Small Business Set-Aside with a response deadline of August 17, 2026. Deliveries must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with the required delivery date being November 22, 2026, and the need ship date set for August 5, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
POINTER, DIAL
Solicitation # SPE4A5-26-T-328B
The contract pertains to the procurement of a POINTER DIAL with NSN 5355-00-646-5376, quantity of 12 units, under solicitation SPE4A5-26-T-328B, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 500 days from the original required delivery date of July 13, 2027, with shipment FOB origin and inspection and acceptance occurring at the destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. Sampling protocols must align with MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted items. The item is designated as a Critical Application Item by Rolls-Royce Corporation, part number 6812620. Packaging and labeling must strictly follow DLA directives, and delivery must be sent to DLA Distribution Warner Robins at Robins AFB, Georgia. The unit of issue is each, with no variance allowed in quantity. The need ship date is April 15, 2025, and the solicitation response deadline was August 12, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 327999
New
DIBBS
KNOB ASSEMBLY
Solicitation # SPE7L1-26-T-916B
The KNOB ASSEMBLY is a defense-related item with the NSN 5355-01-461-8648, requiring a quantity of 619 units under purchase request 7017437748, with delivery expected within 66 days after order. The item is governed by strict export control regulations under either ITAR or EAR, meaning any transmission of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program who have completed required DLA training and approved the export-controlled data questionnaire are permitted to access or handle the technical data. The solicitation number is SPE7L1-26-T-916B, posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 327999, and the procurement is managed by the Department of Defense’s Land Supply Chain through the DLA. The place of performance is New Cumberland, PA, 17070-5002, with Kristie Fown identified as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE4A5-26-T-322N
The contract pertains to the procurement of a knob identified by NSN 5355-01-101-3430, with a quantity of 18 units, under solicitation number SPE4A5-26-T-322N. Delivery is required within 64 days of the award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting standards, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The item does not require the use of Class I ozone-depleting substances. The unit of issue is each, with a unit price of $18.00 and a total contract value of $324.00. The delivery must be made to DLA Distribution Warner Robbins at Robins AFB, Georgia, using the specified parcel post and freight shipping addresses. The original required delivery date is January 1, 2027, with a needed ship date of October 16, 2026. All technical and quality specifications referenced are controlled by the DLA Master List revision effective on the solicitation issue date. The contract is managed by the ASC Supplier Operations OEM Division, with Anthony Nickens as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 327999
New
DIBBS
DIAL, CONTROL
Solicitation # SPE7L1-26-T-913W
This contract is for the procurement of one unit of a DIAL, CONTROL with NSN 5355-01-316-2328 under solicitation SPE7L1-26-T-913W, issued by the Department of Defense’s Land Supply Chain. The requirement is for delivery within five days after award, with responses due by August 17, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. The item must comply with DLA packaging standards and cannot contain mercury or mercury compounds unless explicitly exempted for functional uses such as in batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as dictated by NAVSEA 5100-003D. The use of Class I ozone depleting substances is prohibited. The point of contact for the solicitation is Kristina Derry, with primary communication via email and phone provided, and the place of performance is designated as FPO with a ZIP code of 09573.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7L3-26-T-090B
The contract pertains to the procurement of a knob identified by NSN 5355-01-462-2416, with a total quantity of 196 units requested under purchase request 7017300686. The solicitation, numbered SPE7L3-26-T-090B, was posted on June 25, 2026, and responses are due by July 6, 2026. It falls under the NAICS code 332510, indicating classification within the industrial milling and turning product manufacturing sector, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation is open to federal procurement and does not specify any set-aside for small businesses or other categories. The place of performance and office address details are not provided, though the agency operates within the United States. Interested parties can access additional information through the provided DIBBS portal link.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of a gasket item identified by NSN 5330-01-557-0920 and part number X-113BT, with a requirement of 600 feet delivered in continuous lengths. The unit of issue is the foot, with the order unit being a roll of 500 feet, and delivery must occur within five days of award. Delivery is FOB origin, and the quantity allowable variance is plus 10 percent with zero tolerance for reduction. Inspection and acceptance are both conducted at the destination. Packaging must comply with MIL-STD-2073-1E, using black plastic for preservation, with no cushioning or dunnage, and markings must follow MIL-STD-129 with no special handling codes. The item is not classified as hazardous, but shipment must be sent by the fastest traceable method, explicitly prohibiting parcel post. The destination for delivery is the Distribution Management Office at MCLB Albany, Georgia. The gasket is sourced from approved vendors including Trim-Lok Inc, Charleston Rubber & Gasket Co Inc, and General Dynamics Land Systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The contract is issued under solicitation SPE7L1-26-T-916W, with a response deadline of August 17, 2026, and an original required delivery date of August 6, 2026. The NAICS code is 339991, and the contracting activity falls under the Department of Defense’s Land Supply Chain.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-917D
This contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1000 and part number 2403/0252, supplied by JCB INC, under solicitation SPE7L1-26-T-917D. The item must be delivered in strict compliance with MIL-DTL-117, Type II, Class C, Style 1 packaging standards, requiring medium duty, waterproof, greaseproof, and opaque packaging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling with code 20–20 “Do not bend,” and palletization as outlined in DLA packaging requirements. The delivery is FOB origin with zero variance tolerance, inspection and acceptance occurring at the destination, and shipment must be traceable—parcel post is prohibited. The required delivery date is August 3, 2026, with a 20-day lead time, and the item must be sent to the defense logistics agency warehouse in Johnston, Iowa, under government control codes and shipping instructions. The contract integrates referenced technical and quality standards from the DLA Master List, and includes compliance requirements for hazardous materials packaging under IP025, along with data handling protocols for covered defense information. The unit of issue is each (EA), priced at $1.00, with a total contract value of $1.00. Special handling instructions include preservation method 33, dry climate control, and specific container types with no cushioning material. The point of contact is Kristie Fown, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. This procurement is categorized under NAICS 336310, managed by the Department of Defense’s Land Supply Chain, and is subject to federal acquisition regulations and DLA-specific administrative protocols, including government-only metadata fields and traceability markers.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L1-26-T-917U
This contract is for the procurement of one bracket, angle with NSN 5340-01-537-5042 and part number 3471822 from Oshkosh Defense LLC, under solicitation SPE7L1-26-T-917U. The item is a critical application component required for delivery within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. Delivery must be made to NMCB 4 at Port Hueneme, California, with shipping required via traceable means only—parcel post is prohibited. All packaging must comply with DLA’s master requirements, including MIL-STD-129 for labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under Fed-Std-313, with DLA’s technical and quality requirements taking precedence over any commercial standards. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be pre-approved. The contract enforces strict compliance with DLA packaging and procurement protocols, including specific unit of issue and quantity per unit pack details, and requires palletization in accordance with RP001. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with the delivery destination and shipping instructions clearly defined. The required delivery date is July 15, 2026, and all documentation must reflect the approved solicitation revision in effect at the award date. The item must be marked and tracked using the provided traceable control number and project identifier, and government-specific coding such as IPD 13 and DIC A4A must be applied. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332510 for metal fabrication.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-Q-1455
This contract solicits four units of a critical gun part designated as a lever and shaft, with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, mandating that all manufacturers or exporters register with the Directorate of Defense Trade Controls; failure to provide proof of registration will render an offer ineligible. Government First Article Testing is required, and offerors may be contacted post-submission to price the FAT requirement. Two exhibits must be submitted: one fully assembled and coated unit and one machined but unassembled, uncoated unit. The NSN is 0001S00000052, with a delivery schedule of 281 days after contract award. The solicitation number is SPE7L1-26-Q-1455, issued on August 5, 2026, with responses due by August 14, 2026, under the Department of Defense’s Land Supply Chain, with performance at Hill AFB, Utah. The contracting office point of contact is Zane Zwayer, reachable via email and phone listed in the contract data.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, FUEL TANK
Solicitation # SPE7L1-26-T-917P
The contract specifies the procurement of a Parts Kit for a Fuel Tank, with a quantity of 113 units identified by NSN 2910-01-292-3253 and purchase request number 7016266849. Delivery is required within 49 days after delivery order issuance, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 336310 and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must have government identification removed if rejected. The contract is subject to Covered Defense Information rules and mandates CMMC Level 2 certification for third-party assessors. Technical data associated with this item is export-controlled under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including subsidiaries and overseas employees, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The place of performance is Anniston, Alabama, 36201-4199, with Rita Hughes of DLA listed as the primary point of contact.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-917S
The contract is for the procurement of 200 units of a PLUNGER, DETENT with NSN 5340-00-782-1762 under solicitation SPE7L1-26-T-917S, issued by the Department of Defense through the Land Supply Chain office. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special coding. The item must conform to Technical Data Package Rev A, referenced to drawing number 19207-10949808 Revision B dated January 1, 1999, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The contract prohibits the use of Class I ozone-depleting chemicals in any form and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Inspection and acceptance criteria follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for critical, major, and minor attributes are set at VII, IV, and II respectively. A Certificate of Conformance is authorized under FAR 52.246-15 unless overridden by a quality assurance letter. The end recipient is the Government of Israel Ministry of Defense, with delivery coordinated through the freight forwarder InterGlobal FWRD SV Inc Co G&B PKG Co in Jersey City, NJ, and the primary point of contact is Forsan Saad. The required delivery date is June 1, 2026, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. Configuration control and potential deviations require an Engineering Change Proposal or formal variance request, and covered defense information protocols apply.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-917T
The item specified is a mounting bracket identified by NSN/Part Number 5340-01-628-3279, with a quantity of eight units required under purchase request 7016687716. The delivery is due within 77 days after award, and the solicitation is issued under contract number SPE7L1-26-T-917T, with a response deadline of August 17, 2026. The procurement is governed by Defense Logistics Agency requirements, including technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, restricting any transfer of technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization are permitted to handle the technical data. The place of performance is in New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s Land Supply Chain, and inquiries should be directed to Isabelle Szulewska at the provided contact information.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916U
The contract pertains to the procurement of one helical compression spring identified by NSN 5360-01-339-0693 and part number A51091MDX, supplied by HUNT VALVE COMPANY, INC. Delivery is required within 20 days to the destination FOB, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment, and marking procedures, with no special marking required. Packaging must be palletized according to DLA requirements, and shipment is designated for vessel delivery to USS BOXER LHD 4 at FPO AP 96661 under DLAD procedures C19 and C20. The contract strictly prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The solicitation number is SPE7L1-26-T-916U, with a response deadline of August 17, 2026, and the required delivery date is August 3, 2026. Technical and quality standards referenced in the DLA Master List are incorporated by reference, with compliance determined based on the revision in effect on the solicitation or award date. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916L
This contract specifies the procurement of two helical compression springs with part number 41001657 and NSN 5360-00-566-6315, furnished under solicitation SPE7L1-26-T-916L. The springs must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging levels, and marking guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the springs, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The items are to be delivered FOB origin within 20 days, with no tolerance for quantity variance. Delivery is to the Taiwan Army Zuo-Ying Ammunition Sub-Depot in Kaohsiung City, with no special marking required beyond standard military specifications. The contract mandates that all supplies be shipped without Government identification if rejected, and applies Covered Defense Information requirements as applicable. The unit of issue is each, with a total price of $2.00 for two units, and the freight forwarding and transportation procedures follow DLAD Proc Notes C19 and C20. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. The original required delivery date is August 7, 2026, and the contract is governed by the DoD’s authorized procurement framework, incorporating all relevant DLA packaging, inspection, and acceptance protocols applicable at origin. The NAICS code is 332510, and the solicitation is open to federal contractors under a standard commercial item acquisition process.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details