Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from National Aeronautics And Space Administration was posted on September 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Kratos Ultraspec CobotScan System

Awarded
80NSSC26943584QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. Interested parties must submit their responses by November 3, 2026. The primary point of contact for this opportunity is Sepideh Aria, who can be reached via email or phone for further coordination regarding the solicitation requirements.
Kiewit Infrastructure West Co.

POSTED

about 8 hours ago

DEADLINE

in 6 days
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. This opportunity is specifically targeted toward Disadvantaged Business Enterprises as defined by the Department of Transportation. Primary coordination for this solicitation is managed by Liz Jordan-Wettstein at Aanko Technologies Inc.
Aanko Technologies Inc.

POSTED

about 8 hours ago

DEADLINE

in 20 days
NAICS: 541330
New
SLED
SAT Commissioning and Technical Start-up ServicesThe Nebraska Public Power District is seeking a subcontractor to provide SAT Commissioning and Technical Start-up Services for DVR systems at the Cooper Nuclear Station. The selected provider will be responsible for delivering technical direction and on-site support to prime contractors, focusing on the startup, tuning, and commissioning of the systems. Key technical duties include performing Site Acceptance Testing, aligning power system stabilizers, protectors, compensators, and limiters, and documenting unit response characteristics through on-line tuning. To be eligible for this engagement, the contractor must obtain CNS site access and hold Qualified Manufacturer's Representative status. This subcontract opportunity was posted on October 27, 2026, with a response deadline of January 14, 2027. The primary objective of the contract is the delivery of a fully commissioned and tuned DVR system.
Nebraska Public Power District

POSTED

about 8 hours ago

DEADLINE

in 3 months
NAICS: 541330
New
SLED
State Project No. 0108-0196
Solicitation # 49015
The Connecticut Department of Transportation is seeking technical proposals for State Project No. 0108-0196, which focuses on the Quinebaug River Trail located in the Town of Plainfield. This solicitation, identified by number 49015, falls under NAICS code 541330 for engineering services and is categorized as a SLED organization project to be performed within the state of Connecticut. Interested parties must submit their responses by the deadline of November 13, 2026, at 7:00 PM. The solicitation was officially posted on October 27, 2026, and further details regarding the submission process can be accessed through the Bid Express platform.
Connecticut Department of Transportation

POSTED

about 9 hours ago

DEADLINE

in 17 days
NAICS: 541330
New
SLED
Seismic Safety ComplianceThis subcontract opportunity with the California Department of General Services focuses on achieving seismic safety compliance for lease projects. The selected provider will perform structural evaluations and analysis to install seismic reinforcements, specifically targeting ceilings, lighting, and wall reinforcements. All work must be executed using structural steel and anchors in strict accordance with the California Building Code and State seismic safety specifications. The project falls under NAICS code 541330 and requires the delivery of certified seismic safety compliance for the involved facilities. Interested parties should note the response deadline of November 12, 2026, for this specialized structural engineering and installation effort.
California Department of General Services

POSTED

about 10 hours ago

DEADLINE

in 15 days
NAICS: 541330
New
SLED
Structural Design for Trail InfrastructureThis subcontract for Structural Design for Trail Infrastructure involves providing specialized structural analysis and design services for prime contractors working on Northwest Hills Council of Governments projects. The scope of work focuses on the design of bridges, boardwalks, and culverts to ensure stability and resolve structural challenges, with a requirement for the use of structural analysis software. Key deliverables include detailed structural drawings, load calculations, and material specifications. To qualify for this engagement, the provider must hold a Professional Engineering license in Structural Engineering. The opportunity is managed through DAS Procurement for the state of Connecticut under NAICS code 541330. Interested parties must submit their responses by the deadline of November 30, 2026.
DAS Procurement

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Multi-Use Trail Design and EngineeringThis subcontract for Multi-Use Trail Design and Engineering involves providing primary planning and civil engineering design services for prime contractors working on Northwest Hills Council of Governments projects. The selected provider will be responsible for planning trail systems, developing technical implementation methodologies, and establishing project timelines with specific milestones. Key deliverables include final design plans, technical specifications, and comprehensive project schedules, with a requirement for the use of CAD and GIS mapping tools. To be eligible, the contractor must hold a Professional Engineer license and maintain insurance that includes a Waiver of Subrogation. This opportunity is managed through DAS Procurement for the state of Connecticut under NAICS code 541330. Interested parties must submit their responses by the deadline of November 30, 2026.
DAS Procurement

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
RFP/RFQ - On-Call Engineering Services for Torrington Transfer Station/NRRA
Solicitation # EDC 11- 2026 -01
The Northwest Hills Council of Governments (NHCOG) is soliciting proposals under solicitation number EDC 11- 2026 -01 for on-call engineering services to support the Torrington Transfer Station and the Northwest Resource Recovery Authority (NRRA). The agency seeks a qualified firm specializing in Municipal Solid Waste and Recycling Transfer Stations to provide technical analysis, facility and operational capacity assessments, site planning, and permitting assistance. These services are intended to support ongoing operations and inform the NRRA Strategic Plan and future capital investment decisions, ensuring compliance with CT DEEP General Permits. Interested firms must submit their proposals by November 30, 2026, at 11:00 AM. Submissions must include a project management plan, key personnel resumes limited to two pages, three relevant references, a technical approach, and a detailed project timeline. A fee proposal containing hourly rates or lump sum allocations must be submitted in a separate sealed envelope. Evaluation will be based on personnel qualifications, experience with multiuse trails and waste facility planning, the proposed project approach, and the fee schedule. Awardees must provide proof of workers compensation, liability, and vehicle insurance, including a waiver of subrogation and naming the State of Connecticut and NHCOG as additional insureds within ten days of the award. Required documentation also includes a Non-Collusion Affidavit and certifications of non-discrimination.
DAS Procurement

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
Acoustic Consulting & Specialized Music Room DesignThis subcontract opportunity with the Los Angeles Community College District involves providing specialized acoustic consulting and design services for music facility projects. The selected contractor will be responsible for designing acoustic treatments, sound isolation, and room geometry, while performing detailed acoustic modeling and specifying sound-absorbing materials. A primary focus of the work is ensuring proper isolation between performance spaces and practice rooms to maintain high audio standards. The project requires deep expertise in noise vibration control and music facility acoustics to deliver comprehensive design reports and technical specifications. Performance of the contract will take place in Los Angeles, California. Interested parties must submit their responses by the deadline of November 25, 2026.
Los Angeles Community College District

POSTED

about 14 hours ago

DEADLINE

in 29 days
NAICS: 541330
New
SLED
Professional Design Service For The Annual Pavement Rehabilitation 2027
Solicitation # 20261026023
City of Orinda

POSTED

about 16 hours ago

DEADLINE

in 23 days
NAICS: 541330
New
SLED
Campus Consulting – Geotechnical Engineering Services
Solicitation # RFP2026-05AM
California State University, Chico is soliciting proposals under RFP2026-05AM for a non-exclusive Task Order Service Agreement to provide professional geotechnical consulting services on an as-needed basis. The scope of work includes conducting standard geotechnical and geologic seismic investigations, recommending and coordinating boring locations, and interfacing with project architects to produce Geotechnical or Soils Investigation Reports. These reports must ensure that project designs meet all current codes and physical conditions, although complete geologic hazard studies for non-essential campus buildings are specifically excluded. The contract features an initial term of two years with the option for two additional two-year renewals. Qualified respondents must submit a proposal by November 5, 2026, including a standard fee schedule, detailed firm experience, resumes of key staff, and sample engineering documents. Evaluation will place emphasis on the firm's project history, specifically the construction costs of previous projects and experience working with higher education institutions, particularly the California State University system. Awarded providers must comply with various California legal mandates, including registration with the Department of Industrial Relations, adherence to the California Taxpayer and Shareholder Protection Act of 2003, and the maintenance of comprehensive insurance coverage, including $4 million in general liability and $1 million in workers' compensation. Payments are processed monthly in arrears upon the submission of invoices in the required CSU format.
California State University, Chico

POSTED

about 16 hours ago

DEADLINE

in 9 days
NAICS: 541330
New
SLED
TP-870
Solicitation # 49634
The New Jersey Department of Transportation Procurement is seeking proposals for solicitation TP-870, which focuses on Concept Development services. This agreement is structured as a three year term contract specifically for Design B-1 Level A and H-1 Level A requirements. The project falls under NAICS code 541330, indicating a focus on engineering services. Interested parties must submit their responses by the deadline of November 17, 2026, at 3:00 PM. The solicitation was officially posted on October 27, 2026, and is managed through the Bid Express platform.
New Jersey Department of Transportation Procurement

POSTED

about 17 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The NASA Shared Services Center is seeking a capability statement for the Kratos Ultraspec CobotScan System under solicitation number 80NSSC26943584Q. This special notice is categorized under NAICS code 541330 and is managed by the National Aeronautics And Space Administration. The place of performance for this requirement is located in Hampton, Virginia. Interested parties must submit a capability statement by the response deadline of September 11, 2026. The agency has explicitly stated that quotes will not be accepted or reviewed at this stage. Primary inquiries should be directed to Cara Craft.

General Info

NASA seeks capability statements for Kratos Ultraspec CobotScan System by September 11, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

Contract Value

$216,000

NAICS

541330 - Engineering Services

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Awardee

KRATOS SRE, INC.

Award Issued Date

Documents

2

SATPC0042719 Tab 04 4 SOW - NASA LaRC UltraSpec CobotScan

PDF, High priority: read this first1 page · sow
High

SATPC0042719 - Sole Source Capability Statement Notice

PDF, Low priority1 page · sources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

special-notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts1 person available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
Cara Craft
contact@example.gov

Full Description

Show more

Please see the attached documents for details. 


QUOTES WILL NOT BE ACCEPTED OR REVIEWED. IF YOU FEEL YOUR COMPANY CAN PROVIDE THIS REQUIREMENT, SUBMIT A CAPABILITY STATEMENT. 

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 811310
New
Federal
Laboratory Instrument Installation and CalibrationThis subcontract, titled Laboratory Instrument Installation and Calibration, involves the physical installation, setup, and calibration of the THW-L1S system for prime contractors supporting NASA Marshall Spaceflight Center projects. The scope of work includes transporting and positioning equipment within Lab 105E of Building 4205, establishing power and temperature control connections, and performing precise calibrations for volumetric specific heat and thermal conductivity measurements. Managed by the NASA Shared Services Center under NAICS code 811310, the project requires personnel with specific security clearance for access to Building 4205. The final deliverable is a fully commissioned and calibrated system. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333413
New
Federal
External Chiller/Heater Unit Supply and IntegrationThis subcontract through the NASA Shared Services Center involves the supply and integration of an external chiller/heater unit for laboratory projects at the NASA Marshall Spaceflight Center. The primary objective is to provide a temperature control unit capable of operating between -50°C and 200°C, which must be integrated with the THW-L1S instrument to ensure stable temperatures during propellant measurements. The contractor is responsible for delivering a fully operational integrated system that adheres to all technical and safety specifications required for Lab 105E. This procurement falls under NAICS code 333413 and is intended to support prime contractors in meeting the rigorous environmental control standards of the facility.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811219
New
Federal
NV6000 to NV9000 Profiler Series UpgradeThis subcontract involves performing technical hardware and software upgrades for prime contractors on NASA/NSSC projects located at the Marshall Space Flight Center in Huntsville. The primary scope of work includes the removal of legacy NV6000 components and the installation of NV9000 series upgrade components, specifically part number 6311-0908-01, followed by comprehensive system calibration and verification to deliver a fully operational NV9000 Series Profiler. To qualify for this project, the contractor must hold OEM certification for Zygo system upgrades and maintain strict compliance with all NASA/MSFC facility access and safety requirements. The project is categorized under NAICS code 811219 and is managed through the NASA Shared Services Center.
Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
Federal
Peripheral Kit for Zygo Metrology SystemsThis subcontract involves the procurement of a specialized 6300-0239-53 Peripheral Kit intended for use by prime contractors on NASA/NSSC metrology projects. The hardware is specifically designed for integration with existing Zygo Metrology Systems and will be utilized at the Marshall Space Flight Center in Huntsville. The contract requires the delivery of one completed peripheral kit that adheres to NASA/MSFC receiving standards for commercial items in accordance with FAR Part 12. Managed under NAICS code 334519, the project is overseen by the NASA Shared Services Center.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 532490
New
Federal
NIST-Traceable Calibration Equipment ProviderThis subcontract through the NASA Shared Services Center involves the supply or lease of high-precision, NIST-traceable measurement tools for prime contractors operating at the NASA Langley Research Center in Hampton, Virginia. The scope of work specifically requires the provision of calibrated thermocouples, vacuum gages, and data acquisition systems necessary to meet AMS 2750H survey standards. The provider is responsible for delivering both the physical calibrated hardware and the corresponding current NIST traceability certificates for all equipment. This opportunity is categorized under NAICS code 532490 and was posted on October 27, 2026, with a response deadline of October 29, 2026.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 811210
New
Federal
AMS 2750H Vacuum Furnace Calibration ServicesThis subcontract for the NASA Shared Services Center involves providing specialized vacuum furnace calibration services at the Langley Research Center in Hampton. The scope of work includes the calibration of furnace instrumentation, control thermocouples, and vacuum gages for prime contractors, as well as conducting Temperature Uniformity Surveys using NASA-provided structures. All work must be performed in accordance with AMS 2750H standards using NIST-traceable equipment, with the final delivery consisting of detailed certification data and properly labeled calibrated instrumentation. Personnel assigned to this project are required to obtain security badges to ensure authorized access to the research center. The contract falls under NAICS code 811210 and is managed through the National Aeronautics And Space Administration.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
Federal
Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.
Solicitation # 80NSSC27946410Q
NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
Federal
Vision Technologies Installation Services KSC
Solicitation # 80NSSC26946930Q
The NASA Shared Services Center is seeking to award a sole source contract to Vision Technologies, LLC for the installation of cellular Distributed Antenna System (DAS) services at the NASA Kennedy Space Center, specifically for the K6 B2496 building. This procurement, categorized under NAICS code 541512, is intended as an 8(a) sole source acquisition under FAR 12.102(a) for commercial items and services. The scope of work involves providing materials, project management, and engineering services to establish LTE and NR cellular coverage. Vision Technologies will be responsible for designing the system to industry standards, procuring DAS materials, and installing head end and active equipment, while cabling and antenna installation will be handled by others. The contractor is required to configure, test, commission, and monitor the system to ensure proper operation with a live signal. Key deliverables include submittal drawings, antenna placement locations, testing methodology, and comprehensive close-out documentation consisting of as-built information, firmware revisions, equipment serial numbers, and warranty documentation. Final acceptance is contingent upon a verification test and validation survey once the system is operational. Interested organizations were requested to submit capability statements by October 30, 2026, to determine if the procurement should be conducted on a competitive basis.
Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
Federal
Yateks 3D video borescope system
Solicitation # 80NSSC27946179Q
Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 13 hours
View Details
NAICS: 312111
New
Federal
NCS Customized Flex-11 Security Cabinet (CITM AUTH REQUIRED PRIOR TO AWARD)
Solicitation # 80NSSC26946481Q
Solicitation 80NSSC26946481Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of two TAA-compliant NCS Customized Flex-11 Security Cabinets and associated accessories. The required hardware includes electronic keypad locks with physical overrides, eleven Corning Fiber Optic Cables, seventeen Blackbox-KVM Extender Kits over Fiber supporting dual monitors and DisplayPort 4K, and Corning Closet Connector Housing. This is a delivery-only requirement with no installation services included, and equivalent cabinets are not accepted. The place of performance is the AEGIS facility at the NASA Marshall Space Flight Center in Huntsville, Alabama, with delivery terms specified as FOB Destination. This procurement is set aside for small businesses under NAICS code 312111, and all offerors must be registered in the System for Award Management. The government will award the contract based on the lowest price technically acceptable (LPTA) criteria, provided the offeror demonstrates the ability to meet all technical requirements. The period of performance is six weeks after receipt of order. Quotes must be submitted via email to the primary point of contact by October 26, 2026. Contractors are required to comply with U.S. export control laws, including ITAR and EAR, and must adhere to specific packaging and marking requirements for duty-free entry of foreign supplies.
Soft Drink Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
Federal
Zygo Purchase
Solicitation # 80NSSC27948060Q
The NASA Shared Services Center is pursuing a sole source procurement under FAR 12.102(a) to award a contract to Zygo Corporation for the upgrade of an existing NewView 6000 series optical profiler to the NewView 9000 series. This upgrade is critical for improving metrology capabilities used to measure micrometeoroid impacts, which directly informs the architecture of the Habitable Worlds Observatory. The government has determined that Zygo Corporation is the only authorized provider capable of performing this work due to their proprietary knowledge of the control systems and the need to mitigate technical risks associated with system incompatibility. The scope of work includes the procurement of a NewView 9000 series optical head, electronics, staging, a Core Ultra i7 System Controller with 32 GB DDR5 SDRAM, a 5-axis motorized system, and various specialized lenses and turrets. Additionally, the contract covers 16 hours of on-site installation labor at the NASA Marshall Space Flight Center in Huntsville, Alabama, and requires a Certificate of Calibration utilizing ISO-17025 traceability. The estimated lead time for delivery is 8 to 10 weeks after receipt of order, with an additional 3 to 4 weeks for installation. This acquisition is conducted as a commercial item procurement under FAR Part 12 and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
Federal
Purchase of Haynes alloy sheet
Solicitation # 80NSSC27945835Q
The NASA Shared Services Center, acting for the NASA Glenn Research Center, is soliciting the purchase of proprietary Haynes alloy sheets, specifically Haynes 230, 233, 282, and 244. This procurement is conducted as a Brand Name Justification because the materials are proprietary to Haynes International and remain within the patent timeframe. Consequently, the government intends to negotiate exclusively with vendors capable of providing the subject brand name materials. The contract is designated as a total Small Business Set Aside under NAICS code 331491. Technical requirements mandate that all deliverables include the OEM name and lot numbers, along with certification and verification of AMS specifications regarding chemistry and mechanical properties. The estimated lead time for delivery is three months, with the place of performance located in Cleveland, Ohio. All bids must be submitted as PDF documents by the deadline of October 26, 2026. Quotes must include the cost per piece or unit to be considered for award. The primary point of contact for this effort is Cara Craft, and the contracting officer is Karen Artia.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Closed
Federal
RWP Independent Air Supply
Solicitation # FA9101269IAS
FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Closed
Federal
Integrated Air and Missile Defense (IAMD) Battle Command System (IBCS) Ground Systems Maintenance and Optimization (GSM&O) II
Solicitation # W31P4Q-27-F-A001
W6QK Acc-Rsa

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Closed
Federal
RFP Professional Engineering Services Support
Solicitation # N4425526R31SP
Navfacsyscom Northwest

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 541330
Closed
Federal
T-ESD and ESB Class Alteration Design Support
Solicitation # N32205-26-RFPREQ-DSM-N7-0636
Mschq Norfolk

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Closed
Federal
Notice of Intent to Sole Source to GEI Consultants Inc. (GEI)
Solicitation # N66001-26-Q-6304
Niwc Pacific

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Closed
Federal
31-0002, Fleet Construction, Provisioning, Logistics Support
Solicitation # N64498-27-RFPREQ-PD-31-0002
Nswc Philadelphia Division

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Awarded
Federal
AFSI MATOC ATG-R
Solicitation # SP4706-26-F-0029
DCSO-COLUMBUS-DIVISION-2

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Closed
Federal
C--Requirements Analysis (A&E) for Army (ATEC)
Solicitation # 140D0426Q0842
Ibc Acq Svcs Directorate (00004)

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Closed
Federal
Network Stub Design & Engineering Support
Navsup Weapon Systems Support Mech

POSTED

about 2 months ago

CLOSED

22 days ago
View Details
NAICS: 541330
Closed
Federal
Pedestrian Impact Data Analysis
693JJ9 Nhtsa Office Of Acquistion

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 541330
Closed
Federal
Spacecraft & Mission Hardware Engineering
NASA Johnson Space Center

POSTED

about 2 months ago

CLOSED

22 days ago
View Details
NAICS: 541330
Closed
Federal
Crown Customer Service Package (Technical Support)
NASA Shared Services Center

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS