Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

L--PROFESSIONAL TECHNICAL SERVICES

Active
N0016704Q0036Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Surface Warfare Center Carderock Division is planning to negotiate a sole source procurement contract with Core Tech to design and construct dies specifically for producing ceramic leachable cores using a gravity process. These cores are required to have a minimum flexural strength of 1000 PSI and a maximum of 3000 PSI, as measured according to ASTM standards C158 and D6272. This procurement is justified under the authority of FAR 6.302-1, indicating that only Core Tech is considered capable of fulfilling the agency's technical requirements and no other suppliers or services will satisfy the needs of the project. The contract, titled "L--Professional Technical Services," was posted as a presolicitation by the Department of Defense's Naval Surface Warfare Center Carderock Division, located in Bethesda, Maryland. The solicitation number is N0016704Q0036. Although additional details such as NAICS codes and set-aside status are not specified, the contract emphasizes a professional technical service relationship focused on unique design and manufacturing capabilities essential for the agency's mission. The sole source nature of the contract underscores the specialized expertise Core Tech holds in this niche manufacturing process.

General Info

Navy awards sole source contract to Core Tech for specialized ceramic leachable core dies design.

Agency

Department Of Defense → Nswc Carderock

NAICS

333514 - Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

Place of Performance

MD

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Carderock
ContactsNo contacts available
OfficeBETHESDA, MD, 20817-5700, USA
Organization / AgencyDepartment Of Defense → Nswc Carderock
Office AddressBETHESDA, MD, 20817-5700, USA
ContactsNo contact information available

Full Description

Show more
THE NAVAL SURFACE WARFARE CENTER CARDEROCK DIVISION INTENDS TO NEGOTIATE A SOLE SOURCE PROCUREMENT WITH CORE TECH. THE CONTRACTOR WILL DESIGN AND CONSTRUCT DIES SUITABLE FOR MAKING CERAMIC LEACHABLE CORES USING A GRAVITY PROCESS. THE CORES WILL MEET A MINIMUM FLEXURAL STRENGTH OF 1000PSI AND A MAXIMUM OF 3000PSI WHEN TESTED IAW ASTM C158 AND ASTM D 6272. ONLY ONE RESPONSIBLE SOURCE AND NO OTHER SUPPLIES OR SERVICES WILL SATISFY AGENCY REQUIREMENTS UNDER THE AUTHORITY OF FAR 6.302.1. SEE NUMBERED NORE 22.

Similar Contracts

Same NAICS industry code

NAICS: 333514
New
DIBBS
INSERTER AND REMOVER, B
Solicitation # SPE4A6-27-T-6767
Solicitation SPE4A6-27-T-6767 is a fixed-price, small business set-aside contract issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of one bearing and bushing inserter and remover tool, identified by NSN 5120-01-738-1218. The item is to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of July 18, 2027, and a final required delivery date of October 31, 2027. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging standards according to ASTM D3951 and DLA RP001. Marking and labeling must comply with MIL-STD-129 and RQ017 for bare item marking. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity standards. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 333514
New
DIBBS
BUFFER REMOVAL TOOL
Solicitation # SPE4A7-27-R-X110
Solicitation SPE4A7-27-R-X110 is a total small business set-aside issued by the DLA Weapons Support ASC for the procurement of 30 Buffer Removal Tools, identified as NSN 4933-01-426-3871. This critical application item is associated with Northrop Grumman Systems Corp (CAGE 8KP69) part number 465-0725. The contract is structured as a firm fixed price agreement with a term of five years or until a total value of 350,000 dollars is reached. Delivery is required within 300 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The award will be based on best value, weighing cost or price approximately equal to non-price factors, with past performance and quoted delivery being the primary non-price considerations. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, with packaging following ASTM D3951 and marking per MIL-STD-129. Quality assurance involves zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements for handling controlled unclassified information and utilize the Wide Area WorkFlow system for electronic invoicing.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 4 days
View Details
NAICS: 333514
New
DIBBS
Casting Tooling and Mold FabricationThis subcontract for Casting Tooling and Mold Fabrication supports the DLA Weapons Support Land Supply Chain by providing specialized tooling and molds for prime contractors. The scope of work involves the design and fabrication of molds required to produce antipilferage seals according to the specific geometry of NSN 5340-00-522-2514. To ensure strict technical tolerances are met, the contractor must utilize CNC machining or EDM processes to deliver the completed casting tools and molds. The project is managed under NAICS code 333514 for the Department of Defense and will be performed at Tinker AFB. Interested parties should note the posted date of October 22, 2026, with a response deadline set for November 2, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 333514
New
DIBBS
Tooling Design and FabricationThis subcontract, titled Tooling Design and Fabrication, supports prime contractors serving the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The scope of work involves the design and fabrication of custom tooling, dies, and jigs specifically for forging and machining processes. Utilizing tool steel and Electrical Discharge Machining, the contractor is responsible for delivering custom manufacturing tools that meet the precise technical specifications for NSN 1285012308081. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333514, with the place of performance located in New Cumberland. The solicitation was posted on October 22, 2026, and requires a response by November 2, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 333514
Federal
P&W Support Equipment and Tooling MaintenanceThis subcontract, managed by the Department of Defense under the AFSC PZIMC agency, involves the evaluation and remedial maintenance of 24 unique part numbers of Pratt and Whitney support equipment and tools. The selected contractor will be responsible for assessing tool wear and condition, repairing specialized fixtures and jigs, and certifying all completed work according to applicable technical data to support prime contractors on US Air Force projects. To be eligible for this effort, contractors must hold either ISO 9001 or AS9100 certification. The primary objective is the delivery of fully repaired and certified support equipment and tooling. The response deadline for this opportunity is November 5, 2026, with performance associated with NAICS code 333514.
FA8132 Afsc Pzimc

POSTED

9 days ago

DEADLINE

in 7 days
View Details
NAICS: 333514
Federal
Precision Machined Shafts, Spindles, and GearsThis subcontract involves the manufacture of high-precision mechanical drive and transmission components for prime contractors supporting DLA Weapons Support projects. The scope of work includes the turning, milling, and grinding of shoulder shafts, gearshafts, mechanical spindles, and worm wheels. Production requires the use of CNC lathes and gear cutting machinery to ensure all finished machined parts adhere to specific NSN/NIIN dimensions and Alfa Laval part specifications. The project falls under NAICS code 333514 and is managed by the Department of Defense. Interested parties must note the response deadline of November 3, 2026. The primary objective is the delivery of high-tolerance shafts, spindles, and gears that meet rigorous military and technical standards.
DLA Weapons Support

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
Federal
P&W Tooling Evaluation and Repair
Solicitation # PZIMCPWASSS
The Department of Defense, through the AFSC PZIMC at Tinker Air Force Base, Oklahoma, is conducting a sources sought synopsis under solicitation PZIMCPWASSS to identify qualified contractors for the evaluation and remedial maintenance of Pratt and Whitney (P&W) specific tooling. The scope of work involves the inspection and repair of 24 unique part numbers of PWA support equipment and tools, requiring all work to be performed in accordance with original equipment manufacturer specifications and applicable P&W technical data, engineering drawings, and manuals. Interested sources must demonstrate the ability to certify that repairs meet these technical standards and provide detailed inventory records and reporting on repair status. This market research effort seeks vendors with established quality programs, such as ISO 9001 or AS9100, and the necessary expertise to handle specialized tooling under NAICS code 333514. Respondents must submit a Contractor Capability Survey by November 5, 2026, providing comprehensive business information, including CAGE codes and socioeconomic status, along with detailed responses regarding their technical capabilities and past experience. Primary points of contact for this effort are Roger Farris and Sherry Harvey-Tuley. Security clearance levels and foreign participation restrictions have not yet been determined.
FA8132 Afsc Pzimc

POSTED

9 days ago

DEADLINE

in 7 days
View Details
NAICS: 333514
COMPRESSOR TOOL KIT — 4310017370673 — N0010427QBA25
Solicitation # N0010427QBA25
Solicitation NO0014-27-Q-BA25 is a total small business set-aside request for quotations issued by the Department of the Navy, Navsup Weapon Systems Support Mech, for the manufacture and design of a Compressor Tool Kit. The required item is identified by NSN 1HM 4310-01-737-0673 and part number 377-37156-000, with Johnson Controls Navy Systems, LLC listed as the manufacturer. The part number is considered fully descriptive, and no separate technical drawings or data packages are provided. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. The contractor must adhere to strict quality and safety standards, including the total exclusion of mercury and compliance with Naval Nuclear Propulsion Information safeguarding policies. Packaging must conform to MIL-STD-2073 and MIL-STD-129, with specific requirements for kit packaging and DLR labeling. Inspection and acceptance will occur at the origin. Invoicing is to be processed electronically via the Wide Area Workflow system. Offerors must submit a completed Standard Form 33, the Schedule of Supplies, and updated SAM representations and certifications to be considered for award.
Navsup Weapon Systems Support Mech

POSTED

21 days ago

DEADLINE

in 15 days
View Details
NAICS: 333514
BLUE CHECK TOOL — 5120017393768 — N0010426QEJ99
Solicitation # N0010426QEJ99
Solicitation NO0014-26-Q-EJ99 is a total small business set-aside request for quotations issued by the Navsup Weapon Systems Support Mech for the procurement of Blue Check Tools (NSN 5120-01-739-3768). The requirement consists of 20 units in total, split equally between shipment locations W25G1U and W62G2T. This is a fixed-price procurement with delivery required within 180 days on an FOB Destination basis. Award will be determined based on the Lowest Priced Technically Acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Technical compliance requires adherence to specific drawings and part numbers, including drawing 820-8353227 and part number 820-8353227PCBC5000-90SHT26, with a strict prohibition on the intentional addition of mercury. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for Level A or B packing depending on the destination. Inspection and acceptance will occur at the origin. Contractors are required to use the Wide Area Workflow system for invoicing and must provide a Certificate of Compliance upon delivery. The solicitation also mandates compliance with cybersecurity standards under DFARS 252.204-7012 and requires the submission of Safety Data Sheets for any hazardous materials.
Navsup Weapon Systems Support Mech

POSTED

29 days ago

DEADLINE

in 1 day
View Details
NAICS: 333514
DIBBS
Precision Mold Tooling SupplyThe contract awards the design and supply of precision mold tooling specifically for the production of a drain assembly fan component, under the NAICS code 333514 for Die and Die Tooling Manufacturing. This subcontract is issued by the Defense Logistics Agency within the Department of Defense and is intended to support defense-related manufacturing needs. The solicitation was posted on July 21, 2026, and the precise location for performance has not been specified, indicating flexibility in where the molds will be fabricated or delivered. The contract does not have a set-aside designation, meaning it is open to all qualified businesses regardless of size or status. The awarded entity is responsible for delivering molds that meet exacting precision standards to ensure consistent, high-quality output of the component. All work must align with the technical and quality requirements dictated by the defense supply chain, with performance tied to the specified contract reference number SPE4A726V1839.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 333514
Federal
N00164-26-RFPREQ-CR-JXM-0006The Department of the Navy, specifically USSOCOM, has issued a forecast for a contract regarding DCS Family Battery Insertion/Extraction Fixturing and Handling Trays. This requirement falls under NAICS code 333514, which pertains to the manufacturing of non-electric industrial machinery and equipment. The opportunity was posted on July 2, 2026, under the reference number N00164-26-RFPREQ-CR-JXM-0006. Interested parties can find further information through the Secretary of the Navy's small business portal.
Ussocom

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 333514
DIBBS
Supply of Diesel Engine Generator Repair KitThe contract pertains to the procurement, packaging, and delivery of a military-specification diesel generator repair kit designated by NSN 6115016287993 and part number A045Y128, intended for use at Prince Hassan Air Base in Jordan. The work is to be completed under FOB destination terms, meaning the supplier assumes responsibility for all costs and risks until the goods arrive at the specified destination. The contract is classified as a subcontract under the NAICS code 333514, which relates to the manufacture of industrial and commercial machinery and equipment. It is issued by the Defense Logistics Agency on behalf of the Department of Defense, reflecting its alignment with U.S. military supply chain requirements. The solicitation was posted on June 26, 2026, and is associated with contract number SPE7LX21D0007 and delivery order SPE7L126FAP2H. There is no set-aside designation, indicating the contract is open to all qualified vendors without preference for small businesses or other categories. The packaging and delivery must meet exacting military standards to ensure operational readiness, and all components must comply with the technical specifications of the NSN. Failure to deliver the kit in full and on time could impact critical power systems at the air base, making timely and precise execution essential. The point of contact and specific location details are not provided, but the delivery destination is clearly established as Prince Hassan Air Base, Jordan.
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

NAICS: 541330
New
Federal
Synthetic Signature Generation (SSG) Support Services
Solicitation # N0016726R1006
The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting a single-award indefinite-delivery/indefinite-quantity (IDIQ) contract for scientific, engineering, and technical services to support Synthetic Signature Generation (SSG) based simulation systems. The scope includes the design, development, fabrication, integration, testing, fleet implementation, and maintenance of systems across five Navy fleet training categories: Submarine Team, Navigation, Surface, Surveillance, and On-Board. The contractor will operate within an Integrated Product Team (IPT) to provide technical engineering support to onsite maintenance personnel and support tactical testing and analysis for common simulation subsystems. The contract is structured with Cost-Plus-Fixed-Fee (CPFF) Level of Effort (LOE) CLINs and Cost Only Other Direct Costs (ODC) CLINs, with a total estimated labor requirement of 455,040 hours over a three-year period from August 10, 2027, to August 10, 2030. The procurement is a full-and-open competition evaluated on a best-value basis, prioritizing technical approach, management, and personnel over past performance and cost. Key requirements include a Top Secret facility clearance and Secret safeguarding for personnel, with specific Cyberspace Workforce (CWF) certifications aligned with DoDM 8570.01. Performance will be monitored via a Quality Assurance Surveillance Plan (QASP) using a rating scale from Exceptional to Unsatisfactory. Proposals must be submitted by November 9, 2026, and include detailed staffing plans and past performance narratives. The government has established a small business participation goal of 17 percent and requires the use of Wide Area Workflow (WAWF) for invoicing, with a 15 percent fixed fee withholding policy until a threshold of 100,000 dollars is reached.
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423440
New
Federal
Supply of Raw Material for Tailcone StudsThis subcontract involves the supply of raw material for tailcone studs to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The scope of work requires the sourcing of high-grade alloys or specialty steels that strictly adhere to the specifications outlined in Drawing Ref2.1-(DISTR D)808-T01-07-260807. The supplier is responsible for delivering certified raw material stock to the fabricator, accompanied by necessary material mill test reports and certifications of compliance. Managed by the Department of Defense, this opportunity is designated as a total Small Business Set Aside under NAICS code 423440. The place of performance is located in Bethesda, Maryland. Interested parties must note the response deadline of November 5, 2026, to be considered for this procurement.
Other Commercial Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
Federal
Manufacture of Tailcone (TC) StudsThis small business set-aside subcontract with the Naval Surface Warfare Center, Carderock Division, involves the precision machining and fabrication of 96 Tailcone Studs. The contractor is responsible for procuring raw materials and utilizing CNC machining centers and precision inspection tools to manufacture 8 shipsets of 12 certified studs, ensuring all parts adhere to the dimensions specified in Drawing Ref2.1-(DISTR D)808-T01-07-260807. Key requirements for the project include strict CMMC compliance and the delivery of a Technical Report for the TC Studs as part of CDRL A001. The work will be performed in Bethesda, Maryland, under NAICS code 332710, supporting prime contractors on Department of Defense projects.
Machine Shops

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
Tailcone Studs
Solicitation # N0016727Q0001
The Naval Surface Warfare Center Carderock Division is seeking a small business contractor under NAICS code 336611 to manufacture and deliver 96 tailcone studs, organized as eight shipsets of 12 studs each. This firm fixed price contract requires the contractor to provide all labor, equipment, and materials to produce the hardware in accordance with specific technical drawings and ASME B1.3 System 21 thread acceptability standards. The contractor must maintain a quality system meeting ISO 9001:2015 or later and ensure all material certifications comply with DFARS specialty metals restrictions. Deliverables include the hardware, a digital final certification technical report, and certificates of conformance. The period of performance is three months from the date of award, with final delivery to West Bethesda, Maryland. Packaging requirements are stringent, requiring each shipset to be individually packaged with a hardcopy certification package and then consolidated into a single watertight, heavy-duty hard plastic container. Marking must adhere to MIL-STD-130 and MIL-STD-129, utilizing two-dimensional data matrix symbology for unique identification. Award will be granted to the responsible quoter with a technically acceptable quote deemed most advantageous based on price and past performance. The contract also mandates strict cybersecurity compliance, including CMMC requirements and the safeguarding of covered defense information.
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 238220
New
Federal
Certified Installation of York Chill PumpThis subcontract involves the turn-key removal and installation of a York Chill Pump for prime contractors supporting the Naval Surface Warfare Center, Carderock Division in Bethesda, Maryland. The scope of work includes isolating and draining chill water pipes, removing the damaged pump, installing a new unit, and restoring chill water flow. To ensure a fully operational and leak-free system, the contractor must verify all wiring and perform comprehensive leak inspections. A critical requirement for this project is that all work must be performed by Certified Johnson Controls technicians. The opportunity is categorized under NAICS code 238220 and is associated with the Department of Defense. Interested parties must respond by November 6, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 423830
New
Federal
York Chill Pump Procurement and DeliveryThis subcontract involves the procurement and delivery of a brand-name York Chill Pump, specifically Model YLAA0080SJ46X, to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The selected provider is responsible for the acquisition of one new pump and must ensure compliance with Department of Defense unique identification requirements as specified by DFARS 252.211-7003 and MIL-STD-130. The contractor is tasked with managing all transportation and freight logistics to ensure the equipment reaches its FOB Destination in Bethesda, Maryland. This effort falls under NAICS code 423830 and is managed through the Department of Defense for the Nswc Carderock agency.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333415
New
Federal
NSWCCD York Chill Pump Replacement
Solicitation # N0016727Q1002
The Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting quotes for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1) for York Chiller No. 1 in Building 157. This equipment is critical for providing chilled-water cooling to the Building 13 Server Rooms. The project requires the removal of the damaged pump and the installation of a York Chill Pump, Model YLAA0080SJ46X, Serial SEMM-609950. Due to the proprietary nature of the equipment, the contractor must utilize certified Johnson Controls technicians or representatives. The installation must be completed on or before December 18, 2026, at the NSWCCD facility in Bethesda, Maryland. This is a brand-name restricted procurement under full and open competition and is not set aside for small businesses. The government intends to award a single firm-fixed-price purchase order based on the lowest price technically acceptable method, evaluating quotations on a pass/fail basis for technical requirements and considering past performance via the Supplier Performance Risk System. All quotes must be submitted on official company letterhead, including all-inclusive pricing and business size, and sent via email to the contract specialist and contracting officer by 09:00 AM EDT on November 06, 2026. The contract includes specific requirements for item unique identification per MIL-STD-130 and electronic invoicing through the Wide Area WorkFlow system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
Federal
RFP for Advanced Signatures Technologies (AST)
Solicitation # N0016726R3104
The Department of the Navy, Naval Surface Warfare Center Carderock Division (NSWCCD), is soliciting Advanced Signatures Technologies (AST) Support Services to integrate emerging software technologies into systems-of-systems for naval signatures tactical guidance, training, and synthetic simulation. The scope focuses on Big Data processing, cloud computing, predictive data analytics, and the development of software capabilities for Navy systems afloat and ashore. Technical requirements emphasize the use of Agile software development, DevSecOps, and adherence to Intelligence Community data standards. This effort involves both classified and unclassified programs, requiring personnel to hold Secret clearances at a minimum, with some roles requiring TS/SCI access. This requirement is a total small-business set-aside restricted to SeaPort-NxG Multiple Award Contract holders, with proposals submitted via the PIEE Solicitation Module. The contract is structured as a five-year period of performance consisting of a one-year base period and four one-year option periods. Pricing is based on a Cost-Plus-Fixed-Fee (CPFF) arrangement for labor and Cost No Fee for other direct costs. The total estimated level of effort over five years is approximately 200,640 hours for key personnel and 133,440 hours for non-key personnel. Award will be determined using a best-value trade-off approach, evaluating technical approach, management, personnel qualifications, and past performance.
Engineering Services

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 335911
New
Federal
AA Battery SupplyThis subcontract involves the procurement and delivery of 5,200 high-capacity AA batteries to support prime contractors working on projects for the Naval Surface Warfare Center Carderock Division. The batteries must be supplied in bulk lots and adhere to standard commercial battery specifications to ensure operational compatibility. Managed under the Department of Defense, the opportunity is categorized under NAICS code 335911. The solicitation was posted on October 22, 2026, with a response deadline set for November 19, 2026.
Storage Battery Manufacturing

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 326199
New
Federal
Configuration 2 Case SupplyThis subcontract, titled Configuration 2 Case Supply, involves the procurement of 2,800 ruggedized protective carrying and storage cases for prime contractors supporting the Naval Surface Warfare Center Carderock Division under the Department of Defense. The selected provider will be responsible for sourcing or fabricating high-impact polymer cases and integrating custom-cut protective foam inserts or mounting brackets. All deliverables must strictly adhere to the Configuration 2 specifications detailed in the Government Furnished Information. The opportunity was posted on October 22, 2026, with a response deadline of November 19, 2026, and is categorized under NAICS code 326199.
All Other Plastics Product Manufacturing

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 334417
New
Federal
RDS Common Probe Cable AssemblyThe RDS Common Probe Cable Assembly subcontract involves the supply and assembly of specialized connector cables for prime contractors supporting the Naval Surface Warfare Center Carderock Division. The scope of work includes the cutting, stripping, and terminating of high-reliability shielded cabling, as well as the installation of ruggedized military-grade connectors. To ensure quality and performance, all assemblies must undergo continuity and signal integrity testing in accordance with the JPOE technical baseline. The project requires the delivery of up to 1,800 Common Probe Cables under NSN 6150-01-672-7428. This effort falls under NAICS code 334417 and is managed through the Department of Defense. The solicitation was posted on October 22, 2026, with a response deadline set for November 19, 2026.
Electronic Connector Manufacturing

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 334516
New
Federal
Beta/Photon Probe FabricationThis subcontract involves the precision fabrication and testing of specialized Beta/Photon Probes for prime contractors supporting the Naval Surface Warfare Center Carderock Division. The scope of work requires the production of up to 1,800 radiation-sensitive probes utilizing gas-filled detectors, scintillation materials, and precision shielding. Each unit must undergo rigorous testing to ensure detection accuracy and ruggedness in accordance with PRF-JPM-RND-RDS-001 (Amd 5) and ASQ/ANSI Z1.4-2003 (R2018) standards. Managed under NAICS code 334516 for the Department of Defense, the project focuses on high-accuracy instrumentation for naval applications. Interested parties should note the response deadline of November 19, 2026, for this specialized manufacturing effort.
Analytical Laboratory Instrument Manufacturing

POSTED

7 days ago

DEADLINE

in 21 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 333514
Federal
28 -- NP2000 propeller support equipment
Solicitation # Reference-Number-N00019-04-P2-PJ018
Naval Air Systems Command

POSTED

almost 23 years ago

DEADLINE

N/A
View Details
NAICS: 333514
Awarded
Federal
49--TEST SET, DIESEL INJECTOR.
Solicitation # 03TYP0-42-P-0700

POSTED

about 23 years ago

CLOSED

about 23 years ago
View Details
NAICS: 333514
Federal
28 -- 28 - MTU Tooling
Solicitation # DTCG40-01-Q-41137
Sflc Procurement Branch 3(00040)

POSTED

over 23 years ago

DEADLINE

N/A
View Details
NAICS: 333514
Federal
51 -- Gage, Stretch Gage
Solicitation # MPNE-VV361-3

POSTED

over 23 years ago

DEADLINE

N/A
View Details
NAICS: 333514
Closed
Federal
10--Tool, Clamping
Solicitation # DAAH2303T0430
W6QK Acc-Rsa

POSTED

over 23 years ago

CLOSED

over 23 years ago
View Details
NAICS: 333514
Closed
Federal
51--Special Tool Kit, General Support
Solicitation # DAAE07-03-Q-S098
W4GG Hq US Army Tacom

POSTED

over 23 years ago

CLOSED

over 23 years ago
View Details
NAICS: 333514
Federal
49 -- Pneumatic Test Set
Solicitation # F9060303Q71129

POSTED

almost 24 years ago

DEADLINE

N/A
View Details
NAICS: 333514
Closed
Federal
51--Sources Sought Market Survey-DS Special Tool Kit
Solicitation # MARKET SURVEY 2003.38
W4GG Hq US Army Tacom

POSTED

almost 24 years ago

CLOSED

almost 24 years ago
View Details
NAICS: 333514
Closed
Federal
55--NOUN: GAGE, PROFILE
Solicitation # DAAH23-02-T-0928
W6QK Acc-Rsa

POSTED

about 24 years ago

CLOSED

almost 24 years ago
View Details
NAICS: 333514
Federal
51--Die Crimping Tool 5120-00-116-2975
Solicitation # RFQ-H3-5120-00-116-2975

POSTED

about 24 years ago

DEADLINE

N/A
View Details
NAICS: 333514
Federal
A -- Fixture for Assisting in the Removal and Emplacement of Pipe Strings in Boreholes
Solicitation # Reference-Number-FBO02-017-304

POSTED

over 24 years ago

DEADLINE

N/A
View Details
NAICS: 333514
Federal
MOTER MOUNT MOLD
Solicitation # DOE-SNOTE-020705-001

POSTED

over 24 years ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS