This Government Contract opportunity was posted on September 10, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Laboratory Equipment

Awarded

FDA1059946Federal

Submission Closed09/02/2009, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519

New

SLED

Flagler Scale Replacement

Solicitation # DOT-SS-27-9024-JM

The Florida Department of Transportation, Office of Motor Carrier Size and Weight, is initiating a single source procurement for the Flagler Scale Replacement project, identified by solicitation number DOT-SS-27-9024-JM. The project involves a static scale partial replacement at the I-95 Northbound and Southbound locations in Florida to reduce average wait times for overlength trucks. The scope of work includes extending existing scales to a 50-foot platform and modifying the scale pit configuration by extending it by 10 feet. The agency intends to award the contract to Mettler-Toledo, LLC, as their proprietary electronic scales and Weigh-In-Motion software are essential for critical system functions, including auto calibration, center of gravity assessment, auto release, and WIM record verification. The estimated contract value is 866,046.00 dollars with a performance period of 8 months. This procurement is being handled as a sources-sought notice to determine if the required services are available from a single source. Prospective vendors were required to submit information regarding their capabilities by November 19, 2026. The primary point of contact for this action is Jocelyn Moore, with the request originating from Pamela Blake of the Motor Carrier Size and Weight office.

Florida Department of Transportation

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-563-9037)This subcontract through the Defense Logistics Agency involves the supply of 220 specialized incandescent lamps, specifically part number M6363/9-2 under NSN 6240-01-563-9037. The contractor is responsible for manufacturing or sourcing lamps that strictly adhere to MIL-DTL-6363J Revision J and MIL-DTL-6363/9A Revision A standards. All deliverables must meet rigorous quality assurance protocols per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129 and packaging compliant with RP001 and ASTM D3951. The project is subject to strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in Phoenix, Arizona, under NAICS code 334519. Interested parties must submit responses by November 9, 2026, to support prime contractors on DLA Troop Support projects.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fire Detector Sensing Elements (NSN 6350-37-530-6235)This subcontract involves the manufacture or sourcing of fire detector sensing elements meeting NSN 6350-37-530-6235 specifications for prime contractors supporting Department of Defense DLA supply contracts. The scope of work includes the production, marking, and labeling of radioactive materials with activity exceeding 0.002 microcuries per gram in strict accordance with safety regulations. The selected provider is responsible for delivering the packaged and labeled elements to the designated DLA delivery point in New Cumberland. Administrative requirements for this opportunity include mandatory registration in both SAM and WAWF. The contract falls under NAICS code 334519 and is associated with the DDSP New Cumberland Facility. Interested parties must submit their responses by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Fluorescent Lamps (NSN 6240-01-582-8354)This subcontract involves the supply of fluorescent lamps under NSN 6240-01-582-8354 for prime contractors supporting Defense Logistics Agency Troop Support. The contractor must adhere to the DLA Master List of Technical and Quality Requirements RA001, with packaging and marking following MIL-STD-2073-1E, RP001, and MIL-STD-129 using Special Marking Code 01. All deliverables must comply with the Buy American Act and the Berry Amendment. The scope of work requires the delivery of 73 packages, each containing 40 lamps, shipped FOB Origin to Phoenix, Arizona. This procurement falls under NAICS code 334519 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Reciprocating Counter ManufacturingThis subcontract involves the manufacture of 87 reciprocating counters under NSN 6680-01-390-8625 for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The scope of work requires precision machining and assembly to produce completed and tested units that strictly adhere to quality standards RA001, RC001, RP001, RQ002, and RQ011. Quality assurance must be maintained through zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334519 and is managed by the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties must respond by November 9, 2026, to provide the required hardware for the nuclear reactor program.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Fuel Flow Meter (NSN 6680011855660)This subcontract involves the supply of one Fuel Flow Meter meeting NSN 6680011855660 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The hardware must be delivered to Redstone Arsenal and must adhere to strict quality and logistics standards, including sampling per MIL-STD-1916 or ASQ H1331, marking according to MIL-STD-129, and packaging requirements set by RP001 DLA. The opportunity is categorized under NAICS code 334519 and was posted on October 28, 2026, with a response deadline of November 5, 2026. The successful provider will be responsible for delivering a single, fully packaged and marked unit that complies with all specified Department of Defense technical and administrative requirements.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Radiation Sensing Elements & Electronics SupplyThis subcontract opportunity is for the supply of radiation-sensing tubes, detectors, and military-grade electronic circuit boards to support DLA Weapons Support Maritime Supply Chain projects. The selected provider will deliver electronic and sensing component kits for six units, ensuring all PCBs and sensors meet specific technical requirements for detecting designated radiation types. The contract is designated as a Total Small Business Set-Aside under NAICS code 334519. Performance will take place in New Cumberland, Pennsylvania, and requires strict adherence to ITAR/EAR compliance and Hazard Communication Standards. Responses are due by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Radiacmeter Precision Assembly & IntegrationThe Radiacmeter Precision Assembly and Integration subcontract is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain. The project requires the final assembly, integration, and calibration of six Radiacmeters, adhering strictly to TDP Rev A Gen 1 and specific technical drawings. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 334519. Due to the nature of the equipment, the contractor must hold US/Canada Joint Certification Program certification to ensure full ITAR and EAR compliance. Interested parties must respond by November 9, 2026, to provide the specialized technical services required for these prime contractor deliverables.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-564-9098)This subcontract involves the supply of 97 incandescent lamps to prime contractors supporting the Defense Logistics Agency. The required items are identified by NSN 6240-01-564-9098 and Textron part number 45-35-0008. All deliverables must be shipped FOB Origin and must strictly adhere to packaging and marking standards per MIL-STD-129 and RP001, while meeting FED-STD-313 and TQ requirement IP025 for hazardous materials. The contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. Performance for this contract is centered in Greensboro, North Carolina, under NAICS code 334519. Interested parties must submit their responses by the deadline of November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Display Unit Manufacturing and SupplyThis subcontract involves the manufacture and supply of nine electronic Display Units, identified by NSN 7025-01-587-3102, to support prime contractors under DLA Troop Support supply contracts. The Department of Defense requires that all units be produced in strict accordance with the OEM Source Control Drawing and the DLA Master List of Technical and Quality Requirements. To be eligible, the provider must obtain OEM approval or a Source Approval Request certification and ensure full compliance with the Buy American Act and Section 889 regulations. The project focuses on the delivery of nine fully completed and tested units, with performance taking place in New Cumberland. This opportunity falls under NAICS code 334519 and is managed by the Construction and Equipment T & IFO EQ agency. Interested parties must adhere to the specified timeline, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Supply of Humidity-Temperature Probes (NSN 6685008037705)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the procurement of 12 specialized humidity-temperature probes identified by NSN 6685008037705. The selected provider must manufacture or source these probes in strict compliance with OEM specifications and provide comprehensive documentation regarding the brand, model, and OEM part numbers for the defense telecommunications equipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334519, with the place of performance located at Tinker AFB. Interested parties must submit their responses by November 5, 2026, to support prime contractors delivering on DLA Weapons Support ASC contracts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Humidity-Temperature Probe ManufacturerThis subcontract involves the manufacture of three high-precision humidity-temperature probes, identified by NSN 6685008037705, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to fabricate the probes in strict accordance with MIL-DTL-27723F and MS27188 standards, utilizing inspection systems that comply with SAE AS9003 or ISO 9001. Additional technical requirements include sensor resistance monitoring and the provision of Safety Data Sheets and Hazard Warning Labels as mandated by 29 CFR 1910.1200. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Robins Air Force Base. Interested parties must adhere to the timeline established by the posting date of October 28, 2026, with a response deadline set for November 5, 2026. The work falls under NAICS code 334519.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

The FDA is requesting quotations for a comprehensive laboratory system and associated services under solicitation FDA1059946. The procurement is for a firm fixed-price purchase order featuring an ElectroPuls E3000 Electrodynamic Test Instrument and a wide array of supporting components, including various load cells, testing software, a Dell Precision workstation, and specialized gripping and fixture hardware. The package also includes system installation, operator training, and force and stroke verification services. A critical requirement is that the system must be compatible with an existing Instron electrodynamic test instrument. This acquisition is conducted under simplified acquisition procedures for commercial items with full and open competition under NAICS code 334519. Delivery is specified as FOB Destination to Winchester, MA. Award decisions will be based on best value, with technical capability weighted significantly more than price. Quoters must provide detailed manufacturer literature to prove their products meet or exceed specifications and must be registered in the Central Contractor Registration system. All bids were required to be submitted via email to the designated point of contact by August 7, 2009.

General Info

Agency

N/A

Contract Value

$242,385

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

Instron Corporation NORWOOD MA 02062-2643 USA

Award Issued Date

09/02/2009, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedJul 23

Combined Synopsis

AwardedSep 2

Contract was awarded

Submission Closed

09/02/2009, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

David - Kordel

contact@example.gov

Full Description

Classification Code: 66 Subject: Laboratory Equipment Solicitation Number: FDA1059946 Response Date: 7 August 2009 DESCRIPTION: THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THIS SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES 13.5. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 05-35. The associated North American Industrial Classification System (NAICS) code for this procurement is 334519 for full and open competition. The FDA intends to issue a firm fixed-price purchase order for, brand-name or equal for the following laboratory system and service: CLIN 0001: ElectroPuls(TM) E3000 Electrodynamic Test Instrument, part #ID-E3000NL, quantity one (1). CLIN 0002: Electrical supply voltage: 208 VAC to 240 VAC 16 A single-phase 50/60Hz, part #ID-E3000NL-D2, quantity one (1). CLIN 0003: Strain Channel For 8800 Controller, part #8800-611, quantity one (1). CLIN 0004: Dynacell, Dynamic Load Cell. - 250 N (56 lb), part #1 2527-131, quantity one (1). CLIN 0005: Attachment kit for 250N and 1kN Dynacells to M20x1.5 RH female thread, part #8000-120, quantity one (1). CLIN 0006: WaveMatrix Dynamic Testing Software for Instron 8800 systems, ElectroPuls and Extend Upgrades, part #2495-915, quantity one (1). CLIN 0007: Bluehill 2 Materials Testing Software for new 3300, 5500, 5800 and 8800 systems and EXTEND Retrofits, part #2410-400, quantity one (1). CLIN 0008: Complete Bluehill 2 Software Suite. Includes Bluehill Software, part #2410-400Z1, quantity one (1). CLIN 0009: Dell Precision T3400 Workstation, part #2490-686, quantity one (1). CLIN 0010: Windows XP Professional operating system option, part #2490-686B1, quantity one (1). CLIN 0011: 19 inch Flat Panel LCD Monitor, part #2490-686C1, quantity one (1). CLIN 0012: PCI-GPIB board with cable option, part #2490-686E1, quantity one (1). CLIN 0013: Microsoft Office XP Professional, part #2490-686G1, quantity one (1). CLIN 0014: System Installation CLIN 0015: Basic System and Software Introduction, part #1450-050, quantity one (1). This includes a brief overview for up to 3 operators on the supplied system. Included in this item are Safety Awareness, General materials testing safety precautions and system safety features, Test instrument overview including integration and set-up of load frame and computer. CLIN 0016: Force Verification, 0-60 Kip, Tension & Compression at installation to Instron Specifications, which exceed ASTM Specifications for one Load Cell, part #1480-001, quantity one (1). CLIN 0017: Force Verification, Additional, 0-60 Kip Tension & Compression, part #1480-001A1, quantity one (1). CLIN 0018: Actuator Stroke Verification, part #1471-001, quantity one (1). CLIN 0019: BlueHill Extended System and Software Introduction, part #1450-055, quantity one (1). CLIN 0020: System Warranty CLIN 0021: High stiffness support table for ElectroPuls Test Instruments, part #1300-311, quantity one (1). CLIN 0022: 25N Dynamic Load Cell for use when testing individual stents. Includes mounting adapter to system, part #CP105249, quantity one (1). CLIN 0023: Force Verification, Additional, 0-60 Kip Tension & Compression, part #1480-001A1, quantity one (1). CLIN 0024: Tension/Compression Load Cell, Static Capacity: 10 N (1 kg, 2 lb), part #2530-428, quantity one (1). CLIN 0025: Adapter Plate for 2530-4xx Load Cell Mounts2530-4xx load cells to E3000 motor flange, part #CP102661-Q02, quantity one (1). CLIN 0026: Force Verification, Additional, 0-60 Kip Tension & Compression, part #1480-001A1, quantity one (1). CLIN 0027: Compression Anvil, 25 mm (1 in) Diameter. Type OO (6 mm connection with 2.5 mm clevis pin). Capacity: 100 N, part #2501-114, quantity one (1). CLIN 0028: Compression Anvil, 50 mm (2 in) Diameter. Type O (12 mm connection with 6 mm clevis pin). Capacity: 10 kN. Includes LVDT Mounting Holes, part #2501-083, quantity two (2). CLIN 0029: Screw Side Action Grips. Capacity: 500 N (100 lb, 50 kg), part #2710-004, quantity one (1). CLIN 0030: Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in), part #2702-130, quantity one (1). CLIN 0031: Faces, Serrated. 25 mm wide x 25 mm high (1 x 1 in), part #2702-131, quantity one (1). CLIN 0032: Faces, Line Contact. 25 mm wide (1 in). For 2710-004 Screw Action Grips. Set of four. Part #2702-133, quantity one (1). CLIN 0033: Fiber Clamps, Lever Action. Capacity: 5 N (1.10 lb, 500gm), part #2711-006, quantity one (1). CLIN 0034: - 3 kN Mechanical Fatigue-Rated Wedge Action Grips, part #2742-202, quantity one (1). CLIN 0035: Flat serrated jaw faces 25mm (1 in) wide for gripping flat specimens 0 to 6.3mm (0 to 0.25 in) thick. Quantity of 4 faces. Part #2703-801, quantity one (1). CLIN 0036: Vee jaw faces for gripping round specimens 3.0 to 7.8mm (0.12 to 0.31 in) diameter. Quantity of 4 faces. Part #2703-803, quantity one (1). CLIN 0037: 1 Set (Pair) of Fatigue Rated Adaptors for attaching accessories with M6 RH female thread to Electropuls E3000 fitted with a 5kN Dynacell. Part #8000-127, quantity one (1). CLIN 0038: Micro 3 Point Bend Fixture, part #2810-411, quantity one (1). CLIN 0039: BioPuls Bath, part #3130-100, quantity one (1). CLIN 0040: BioPuls Submersible Pneumatic Side Action Grips, part #2752-005, quantity one (1). CLIN 0041: Pneumatic Air Kit For Electrodynamic Test Instruments, part #2718-011, quantity one (1). CLIN 0042: 25 mm x 25 mm serrated faces. Part #2702-209, quantity one (1). CLIN 0043: Advanced Video Extensometer, part #2663-821, quantity one (1). CLIN 0044: Transverse Strain Measurement Option for 2663-821 Advanced Video Extensometer. Part #2663-821T1, quantity one (1). CLIN 0045: 60 mm Field of View Kit, part #2663-821L1, quantity one (1). CLIN 0046: Strain verification, Video or HRD Extensometer, part #1490-010, quantity one (1). CLIN 0047: 12 Station Fixture. Part #CP KY033009, quantity one (1). CLIN 0048: Force Verification Tension & Compression of 12 load cells on 12 station test fixure. Part #1481-012, quantity twelve (12). Specific requirement: System must be compatible with an existing Instron electrodynamic test instrument. Delivery terms shall be FOB Destination. FOB Destination means the contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. Award will be made to the party whose quote offers the best value to the Government, technical, price, and other factors considered. The Government may award this contract to other than the lowest price technically acceptable quote. The Government will evaluate information based on the following evaluation criteria: 1) Technical Capability factor described to "Meet or Exceed the Requirement," and 2) Price. Technical Capability is significantly more important than price. Evaluation of Technical Capability shall be based on the information provided in the quotation. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature or other product literature which CLEARLY DOCUMENTS that the offered product meets or exceeds the specifications stated herein. FAR provisions can be found on the following website: http://www.arnet.gov. The following provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors-Commercial Items; 52.225-2 Buy American Certificate; 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs: 52.222-3, Convict Labor 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-36, Affirmative Action for Workers with Disabilities 52.222-50, Combating Trafficking in Persons 52.225-1, Buy American Act--Supplies 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Fund Transfer-Central Contractor Registration. This is a Combined Synopsis/Solicitation for laboratory equipment as defined herein. The Government intends to award a Firm Fixed-Price Purchase Order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein. Additionally, all quotes shall include price (s); FOB point; a poc (name and telephone number); a statement from the offeror verifying that they are CCR Registered under NAICS code 334519; delivery date (delivery date is of the utmost importance); business size; and payment terms. Delivery shall be to FDA location in Winchester, MA 01890. FDA intends to make an award soon after the response date of this notice and all bids must be submitted via email and be received by 4:30 PM (1630) EST on 7 August 2009 to the attention of David Kordel, contact@example.gov. Offerors shall ensure the RFQ number is visible in the header of the email. FAX QUOTES SHALL NOT BE ACCEPTED.