Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Texas was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Laboratory Ovens and NCAT Asphalt Furnaces for the Abilene District

Closed
601340000066278State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333994
New
DIBBS
OVEN, BAKING AND ROA
Solicitation # SPE3SE-26-Q-0428
This procurement document specifies the acquisition of one unit of an OVEN, BAKING AND ROA under the National Stock Number 7310-01-570-2769, with a firm fixed price pricing structure and no variance allowed in quantity. The item must be delivered within 30 days after award to a designated destination in Draper, Utah, with FOB destination terms placing risk of loss on the contractor until receipt. Inspection and acceptance occur at the destination, and the contractor is required to comply with all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 packaging guidelines. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack strictly as defined in the contract. The item must be shipped by traceable means, excluding parcel post, and the government retains the right to reject non-accepted supplies if government identification remains on them. The contract mandates strict compliance with Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including the requirement to apply unique item identification per DFARS 252.211-7003, which necessitates marking the item with a two-dimensional data matrix containing enterprise identifier, serial number, and other traceability elements in accordance with MIL-STD-130. The contractor must report item identification data through Wide Area Workflow or the DoD Item Unique Identification Registry and ensure all markings are machine-readable using approved verification technology. Additional compliance obligations encompass safeguarding covered defense information under DFARS 252.204-7012, prohibiting the use of covered telecommunications equipment under DFARS 252.204-7018, adhering to Buy American and specialty metal restrictions, implementing counterfeit part detection systems, and providing whistleblower rights notifications. The contractor must display fraud hotline posters, inform employees of whistleblower protections, and comply with export control, labor, and sustainability requirements. Subcontractors must be bound by the same requirements, and all submissions must be made through the DLA Internet Bid Board System by the deadline, with no alternate parts permitted. The acquisition is non-set-aside, and the government reserves the right to evaluate and award based on price, delivery reliability, and compliance with all statutory and regulatory obligations.
SUBSISTENCE FSE SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
NAICS: 333994
New
Federal
High Temperature Controlled Atmosphere Furnace Suite
Solicitation # N6893626Q5141
The Naval Air Warfare Center Weapons Division at China Lake, California, is conducting market research to identify capable vendors for a High Temperature, Controlled Atmosphere Furnace Suite to support the development and processing of metal and ceramic-based composite materials, particularly for additive manufacturing components such as hypersonic radomes, nozzles, and leading edges. The suite must consist of two furnace chambers—one capable of reaching 1300 degrees Celsius with an interior chamber size of 14.8 x 11.8 x 11.8 inches, and another capable of 2200 degrees Celsius with a 12 x 12 x 12 inch chamber—along with two vacuum systems, a combined chiller, and a unified cabinet structure featuring an active switching mechanism to direct operations between chambers. The system must include comprehensive technical documentation such as assembly drawings with utility callouts, installation and operation manuals, and a recommended layout plan. Delivery and installation are required on-site at China Lake, with FOB Destination terms, and the contractor must provide up to two days of training at their facility during a government site visit prior to shipment and up to three days of on-site training immediately after installation. The equipment must be completed and ready to ship within one year of order and deposit receipt, accompanied by a one-year warranty commencing at commissioning. Responses must be submitted by June 15, 2026, and are expected to include a capability statement detailing the firm’s experience, assets, and qualifications, with a demonstrated track record of at least ten years in designing, delivering, and supporting high-temperature, controlled-atmosphere laboratory furnaces. The furnace suite must meet electrical certification by a Nationally Recognized Testing Laboratory and incorporate design features to ensure safe operation within a confined facility, including routing of all utility lines—gas, vacuum, cooling water, compressed air, and electrical—through conduits or along structural elements to eliminate operator tripping hazards. A Cyber Maturity Model Certification (CMMC) Level 1 (FCI Self) is anticipated; contractors questioning this level must provide a rationale and recommended alternative. While this solicitation is strictly for market research and not a formal request for proposal, feedback on the draft Performance Work Statement is welcome and should be included in responses. The solicitation number is N6893626Q5141, with the applicable NAICS code 333994, and inquiries should be directed to Kyle Hedman or Luke Kelley at the
Naval Air Warfare Center

POSTED

6 days ago

DEADLINE

in 9 days
NAICS: 333994
New
Federal
44--1MW Modular Test Furnace
Solicitation # 89243326QFE000544
The National Energy Technology Laboratory, under the Department of Energy, is soliciting proposals for the design, fabrication, and delivery of a 1MW modular test furnace under solicitation number 89243326QFE000544. The opportunity is open to industry partners with expertise in high-temperature industrial systems and modular engineering solutions, with a North American Industry Classification System code of 333994. Proposals must be submitted by July 27, 2026, at 9:00 PM Eastern Time, following the requirements outlined in the official solicitation. The furnace will serve as a test platform for advanced energy technologies and must be engineered for scalability, operational reliability, and integration with existing research infrastructure. Performance is expected to occur at the NETL facility in Morgantown, West Virginia, though the exact location details are not specified beyond the agency’s primary address. David J. Lahey serves as the primary point of contact for inquiries and submissions, reachable via email at David.Lahey@netl.doe.gov or phone at 412-386-9187. The solicitation is open to all eligible respondents without restriction based on set-aside programs, and all bids must meet technical, logistical, and compliance standards to be considered. This procurement reflects the Department of Energy’s commitment to advancing next-generation energy systems through targeted laboratory-scale testing capabilities. Interested parties should review the full details via the provided SAM.gov link to ensure full alignment with expectations, timelines, and technical specifications prior to submission.
National Energy Technology Laboratory

POSTED

6 days ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The Texas Department of Transportation is seeking bids for Laboratory Ovens and NCAT Asphalt Furnaces for its Abilene District under solicitation number 601340000066278, with responses due by July 13, 2026. All information, including amendments, questions, and additional documents, must be monitored through the TxDOT Procurement Portal, as no submissions will be accepted after the deadline. The procurement is classified under NAICS code 333994 and requires vendors to be registered on the Centralized Master Bidders List through the Euna Procurement system, though no specific contract type, estimated value, or pricing details are provided. Delivery is expected within Texas, specifically for use in the Abilene District, but no exact delivery address, FOB terms, or performance timeline is specified. The Point of Contact is Amanda Davenport, who serves as the primary liaison for this solicitation, though no Procuring Contracting Officer or detailed Contracting Officer’s Technical Representative designation is named. While the solicitation references compliance with NIGP codes and TxDOT procurement procedures, it lacks explicit technical specifications, quality standards, inspection criteria, packaging requirements, or evaluation factors such as weightings or award basis. No detailed contract clauses, representations, certifications, or accounting data such as TAS or ACRN codes are included in the provided documentation, and there is no indication of invoicing methods, payment addresses, or special requirements like security clearances or OCI restrictions. Response submissions must be made electronically via the Bonfire Hub portal, with no alternative delivery methods permitted.

General Info

Texas DOT seeks lab ovens and asphalt furnaces for Abilene District, response due July 13, 2026, by Amanda Davenport.

Agency

Texas Department of Transportation

NAICS

333994 - Industrial Process Furnace and Oven ManufacturingView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(1)

Solicitation 601340000066278 - Ovens, Laboratory

TXTrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Response Deadline

Deadline has passed

Posted

Solicitation

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTexas Department of Transportation
Contacts1 person available
OfficeTX, USA
Organization / Agency
Texas Department of Transportation
Office AddressTX, USA
Contacts
Amanda Davenport

Full Description

Show more
OVENS, LABORATORY NOTE: All information or changes related to this solicitation will be posted on this website. Respondents should monitor this website for any addendums, additional documents, questions and answers, or changes. The opening date specified on this posting is the due date for submittal of responses. Response submittals will not be accepted after the opening date and time.