Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LAMP HOLDER ASSEMBL

Active
SPE2DH-26-T-5292Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a single lamp holder assembly identified by NSN 6530-01-566-6739, intended for use on Federal Medical surgical ceiling lights. The item must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 and MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to commercial standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with all units sealed in suitable containers to prevent damage and shipped in commercial exterior containers using the lowest-cost carrier to the specified delivery point. The item is not regulated by the FDA. Delivery is required within 20 days FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Shipping must avoid parcel post and use the fastest traceable means, with parcel post address and freight shipping details provided for USS ESSEX LHD 2. All packaging and labeling must conform to DLA Packaging Requirements and palletization standards. The solicitation number is SPE2DH-26-T-5292, with a response deadline of July 27, 2026, and an original required delivery date of July 21, 2026.

General Info

Procure single lamp holder assembly NSN 6530-01-566-6739 for surgical lights, no mercury, DLA standards, delivery in 20 days FOB destination.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

UNIT 100150 BOX 1, FPO, AP, 96643, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE2DH-26-T-5292

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LAMP HOLDER ASSEMBL
LAMP HOLDER ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
END ITEM IDENTIFICATION 6530-01-564-0746 AND 6530-01-564-0744,
CEILING LIGHTS APL DEVELOPMENT
LAMP HOLDER ASSEMBLY FOR USE ON FEDMEDICAL SURGICAL CEILING LIGHTS
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS NOT REGULATED BY THE FDA
.
.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
SPE2DH-26-T-5292
SECTION B
https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
FEDMEDICAL, INC 3EG46 P/N 1000378
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017524037 0001 EA 1.000
NSN/MATERIAL:6530015666739
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
SPE2DH-26-T-5292
SECTION B
PR: 7017524037 PRLI: 0001 CONT’D
M/F: (TCN) N2153361900426
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
SPE2DH-26-T-5292 NSN/Part Number: 6530-01-566-6739 Quantity: 1 EA Purchase Request: 7017524037QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331313
New
DIBBS
MASSAGER, MUSCLEThe contract is for a hand-held muscle massager featuring a foam-covered, ergonomically designed body with non-slip grips, suitable for targeted relief on the neck, arms, shoulders, upper and lower back, hips, glutes, quads, hamstrings, IT bands, calves, shins, and feet. The foam is closed-cell, non-porous, and free of rubber or latex, ensuring durability and ease of cleaning with antibacterial gel or spray. The unit measures 18 inches overall with a 10-inch roller length and is portable for convenient use. It is supplied as a single unit under the NSN 6530-01-600-2392, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. The government mandates removal of its identification from non-accepted supplies, and bidders must clearly state the source and part number being offered. The solicitation number is SPE2DH-26-T-5334, issued on July 20, 2026, with responses due by July 27, 2026, under a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located at Fort Bliss, Texas. Primary point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
FOAM ROLLER, PHYSICAL TThe contract is for the procurement of two foam rollers designed for physical therapy, specifically a firm blue round foam roller measuring 6 inches by 12 inches, identified by the NSN 6530-01-600-8194. Each unit must be individually packaged in a sealed commercial container that protects against damage or breakage and then packed in suitable commercial shipping containers to ensure safe and cost-effective delivery to Fort Bragg, North Carolina, with a delivery deadline of 20 days after award. All packaging and labeling must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and suppliers must reference this standard for proper identification and marking. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract also includes provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. Bidders are required to specify the manufacturer, part number, and source of the foam rollers being offered, and all submissions must be received by the response deadline of July 27, 2026. The procurement is managed by the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
FOAM ROLLER, PHYSICAL T
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
Federal
Niobium Material Supply
Fermilab - DOE Contractor

POSTED

about 23 hours ago

DEADLINE

in 17 days
View Details
NAICS: 331313
New
DIBBS
Supply of Raw Aluminum Alloy MaterialThe contract calls for the supply of certified aluminum alloy raw material with full traceability from source to delivery, including comprehensive mill test reports to verify composition, mechanical properties, and processing history. All materials must meet stringent defense industry specifications and comply with applicable environmental regulations to ensure suitability for critical aerospace and defense applications. The material is destined for performance at Tinker Air Force Base, with delivery and compliance deadlines strictly enforced. Submission responses are due by July 27, 2026, and the contract is structured as a subcontract under the NAICS code 331313, indicating classification within the aluminum rolling, drawing, and extruding industry. The ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with no set-aside provisions applied. The procurement is managed through the DIBBS platform, and bidders must ensure adherence to all technical, documentation, and logistical requirements outlined in the solicitation to qualify for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
Raw Materials & Components SupplyThe contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 331313
New
DIBBS
HYGIENE KIT, HOSPITAL PThe contract is for a hospital patient hygiene kit containing thirty units, each comprising a hair brush, comb, soap, a 6x10 inch ziplock bag, a razor, a toothbrush, toothpaste, a clear vinyl pouch, a 4x4 inch box label, and five packets of 0.25 ounce shaving cream. The unit of issue is a package of thirty items, with one package ordered under NSN 6530-01-618-9373 and purchase request 7017513490. All items must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA specifications, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and bidders must provide the source and part number for each item supplied. Delivery is required within five days of award, and the solicitation, issued under SPE2DH-26-T-5258, closes on July 23, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 331313
New
DIBBS
Bronze Strainer Manufacturing and SupplyThe contract calls for the manufacture and supply of precision bronze strainers specifically designed for use in medical sterilization equipment, requiring strict adherence to technical specifications that ensure performance under rigorous clinical conditions. All products must be produced using domestically sourced materials and components to meet federal sourcing requirements, and must be packaged according to military packaging standards to guarantee integrity during transport and storage in austere environments. The work is classified as a subcontract under NAICS code 331313, indicating it falls within the copper foundry industry, and performance is expected to occur at a military postal address designated as FPO with zip code 96678. The solicitation was posted on July 15, 2026, with a response deadline of July 22, 2026, and is being managed by the Department of Defense’s Medical Supply Chain FSH office, reflecting its critical role in supporting military medical operations.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 331313
New
DIBBS
VALVE, BALL ANLRThe contract specifies the procurement of a ball valve designated as VALVE, BALL ANLR with NSN 6530-01-546-3565 and part number 700321 REV J, requiring one unit for delivery within 20 days to a FPO military address. The item is classified as a medical device regulated by the FDA under Regulation 880.6880, Class II, requiring compliance with 510(k) premarket notification, registration, labeling, and good manufacturing practices. All packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging guidelines require each unit to be sealed in a protective container and shipped in commercial exterior containers suitable for safe transport at the lowest freight rate. The valve is subject to strict prohibitions against intentional use of mercury or mercury compounds except in approved applications like batteries or sensors, with additional containment requirements for portable devices. The vendor must ensure compliance with DLA packaging and labeling standards and use only authorized unit of issue codes. The delivery is FOB destination with zero variance allowed, inspection and acceptance occur upon arrival, and shipping must bypass parcel post in favor of traceable methods. The contract references technical and quality requirements from the DLA Master List, and the supplier must comply with all applicable defense logistics regulations including radiation-controlled environments and defense information handling. The point of contact for inquiries is Tina Vu of the Department of Defense, and the solicitation response deadline is July 22, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 331313
New
DIBBS
STRAINER, BRONZThe contract is for the procurement of one unit of a brass strainer, NSN 6530-01-546-3556, intended for use with a general purpose sterilizer within the U.S. Department of Defense’s Medical Supply Chain FSH. The solicitation, identified as SPE2DH-26-T-5209, was issued on July 15, 2026, with responses due by July 22, 2026, and requires delivery by July 17, 2026, within a 20-day ADO window. The item must be shipped FOB destination to USS ARLINGTON LPD 24, FPO, ZIP 96678, using the fastest traceable means without parcel post. Packaging must comply with commercial standards and be secure in a sealed unit container to prevent damage, with exterior shipping containers suitable for safe, low-cost carriage to the delivery point. All labeling and marking must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and supersede ASTM D3951 where applicable. The item is subject to the Buy American Act and Berry Amendment, with a reduced threshold of $150,000, requiring full disclosure of non-domestic materials. The contractor must comply with cybersecurity mandates including NIST SP 800-171 DoD Assessment Requirements and safeguarding of covered defense information, in addition to FAR and DFARS clauses covering trafficking in persons, equal opportunity, electronic submission of payments via WAWF, and prohibited materials such as hexavalent chromium. Payment and receiving reports must be submitted electronically through WAWF under DFARS Appendix F requirements, and the contractor must maintain active SAM registration with updated socioeconomic and small business status representations. This solicitation is not a small business set-aside, and award will be based on compliance with all technical, packaging, regulatory, and cybersecurity conditions.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 331313
New
DIBBS
HYGIENE KIT, PATIENTThe HYGIENE KIT, PATIENT is a medical supply item with NSN 6530-01-621-4282, procured in quantities of 10 boxes, each containing 12 units, for delivery within five days to San Antonio, Texas, under contract SPE2DH-26-T-5236. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging that ensures safe, cost-effective delivery via common carrier, with compliance to Medical Marking Standard No. 1, which replaces MIL-STD-129. All items must be properly marked per MMS NO. 1 guidelines, and technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The procurement is governed by federal standards under NAICS code 331313, with the offering deadline set for July 22, 2026, and the primary point of contact is Tina Vu at DLA Troop Support.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 331313
New
DIBBS
COVER, HEAT TREATMENT PThe item is a heat treatment pad cover, specifically designed for cervical use, measuring 24 inches in length and 6.6 inches in width, made of washable terry cloth material. It is intended for use with heat treatment pads and is to be supplied as individual units, with a quantity of two required. The product is identified by the NSN 6530-01-600-2674 and must comply with the DLA Packaging Requirements for Procurement, incorporating all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. Bidders are required to specify the source and part number being offered. Delivery is due within 20 days after award, and the procurement is under solicitation SPE2DH-26-T-5225, issued by the Department of Defense’s Medical Supply Chain FSH. The solicitation was posted on July 15, 2026, with responses due by July 22, 2026, and performance will take place at Fort Bliss, Texas, 79918-0000. The primary point of contact for inquiries is Tina Vu, reachable via email and phone.
MEDICAL SUPPLY CHAIIN FSH

POSTED

6 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Delivery CoordinationThis contract requires precise coordination of time-sensitive FOB Destination deliveries for hazardous material shipments, with all deliveries required to be completed within 20 days of award. Compliance with Department of Defense standards is mandatory, including adherence to all regulatory documentation and real-time tracking protocols for hazardous cargo. The work falls under NAICS code 484220 and is categorized as a subcontract within the Medical Supply Chain FSH organization under the Department of Defense. Performance is designated to take place at FPO with ZIP code 09588, indicating operations may involve overseas or military post locations. Responses must be submitted by the deadline of July 27, 2026, following the solicitation posted on July 20, 2026, with no set-aside designation specified, leaving eligibility open to qualified bidders regardless of business size or certification status.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks providers to deliver regulatory compliance services specifically tailored to hazardous materials labeling, safety data sheet preparation, and MIL-STD-129 marking for military shipments. These services are critical to ensuring adherence to federal and Department of Defense standards for the safe handling, transport, and identification of hazardous substances within the military supply chain. The contractor will be responsible for accurately documenting and marking hazardous materials to meet mandated regulatory requirements and to support seamless logistics operations across Department of Defense channels. The work is categorized under NAICS code 541690 and is structured as a subcontract with a response deadline of July 27, 2026. Performance is required at FPO, ZIP 09588, which indicates delivery to military postal addresses typically used for overseas or expeditionary locations. The solicitation originated from the Medical Supply Chain FSH under the Department of Defense, emphasizing the importance of precision and compliance in medical and logistical contexts involving hazardous material shipments. All deliverables must align with current Department of Defense and federal transportation regulations to avoid operational delays or safety violations.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
Supply of CO₂ Gas Analyzer Measuring TubesThe contract requires the manufacture and supply of 14,000 packages of glass measuring tubes specifically designed for use in CO₂ gas analyzers with a measurement range of 100 to 3000 parts per million. Each tube must feature melted tips to ensure precision and safety during use, and all items must strictly comply with the National Stock Number NSN 6630121893126 and the military packaging standard MIL-STD-129 to ensure uniformity, traceability, and durability in defense logistics. The products are intended for military medical applications and must meet exacting technical and packaging specifications to support reliable operation in field and facility environments. The solicitation, posted on July 20, 2026, with a response deadline of July 27, 2026, is structured as a subcontract under the NAICS code 334510, which classifies it within the Instrument and Laboratory Equipment Manufacturing sector. The contracting activity is managed by the Department of Defense through the Medical Supply Chain FSH, with performance required to be delivered to FPO, ZIP 09588. Although no specific point of contact is listed, the official solicitation can be accessed via the DIBBS portal, indicating this is part of a broader defense procurement process intended to maintain and resupply critical analytical equipment for medical monitoring systems.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Nickel-Titanium Alloy for Medical DevicesThe contract seeks a supplier capable of providing medical-grade nickel-titanium (NiTi) alloy specifically for the manufacture of endodontic rotary files, with stringent requirements for full traceability throughout the material’s production lifecycle and mandatory biocompatibility certification to ensure safety for human use. The alloy must meet exacting medical standards to support precision dental instruments used in root canal procedures, with all documentation and quality controls verified and maintained to comply with regulatory expectations for implantable medical devices. The material must be consistently produced under certified processes to guarantee mechanical properties, shape memory characteristics, and corrosion resistance critical to the performance and reliability of the final product. This is a subcontract opportunity posted under the Department of Defense’s Medical Supply Chain FSH, with a response deadline of July 27, 2026, and a NAICS code of 331492 indicating classification under other fabricated metal product manufacturing. The place of performance is designated as FPO, ZIP 96672-4090, indicating potential delivery to military medical facilities or defense-contracted manufacturers. Although no point of contact or set-aside details are provided, the solicitation number SPE2DH26T5305 and public DIBBS portal link confirm the formal procurement process, requiring bidders to submit proposals that fully address documentation, compliance, and supply chain integrity to qualify for award.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics Support for Medical ShipmentsThe contract requires the provision of DoD-compliant packaging, labeling, and logistics services for medical supplies destined for naval hospital ships, ensuring full adherence to MIL-STD-2073-1E and DLA RP001 standards. All packaging and labeling procedures must meet stringent military specifications for durability, traceability, and environmental resilience to support operational readiness in maritime environments. The services encompass end-to-end logistics management, including inbound receipt, storage, consolidation, outbound preparation, and shipment coordination to a FPO address with ZIP code 96672-4090, with performance centered on maintaining the integrity and timely delivery of critical medical assets. This is a subcontract under the Department of Defense, classified under NAICS code 493190, and was posted on July 20, 2026, with a response deadline of July 27, 2026. The contract is managed by the Medical Supply Chain FSH office and targets vendors capable of supporting the unique demands of naval medical logistics, including strict compliance with federal defense regulations and the ability to operate within the constraints of maritime deployment timelines and conditions. No set-aside designation is specified, and the point of contact details are not provided, with all submissions and inquiries directed through the designated DIBBS platform link.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Supply of Endodontic Rotary Files (Protaper Gold Rotary Finishing Files)The contract solicits the manufacture and supply of FDA-compliant endodontic rotary finishing files constructed from nickel-titanium alloy, specifically Protaper Gold Rotary Finishing Files, for use in root canal treatments aboard U.S. military hospital ships. These instruments must meet stringent medical device regulations and be suitable for high-precision dental procedures in a deployed maritime environment, ensuring reliable performance under field conditions. The deliverables are intended to support the dental care mission of the Department of Defense, with performance required at the FPO address 96672-4090, indicating shipment to naval vessels operating in the Pacific region. This is a subcontract opportunity under NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector, and is being managed by the Medical Supply Chain FSH under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, leaving a limited seven-day window for qualified manufacturers to submit proposals. Bidders must ensure compliance with FDA standards, military specifications for medical devices, and the logistical requirements of delivering sensitive dental instruments to remote, mobile medical facilities. While no set-aside provisions are indicated, participation is open to all eligible subcontractors capable of meeting the technical, regulatory, and delivery timelines.
Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488999
New
DIBBS
FOB Destination Delivery and LogisticsThe contract requires end-to-end logistics and delivery services to APO AE 09227-0000 in Kaiserslautern, Germany, under FOB Destination terms, meaning the vendor assumes full responsibility for transportation, customs, and delivery costs until the goods reach the final destination. The delivery must be completed in compliance with all international shipping regulations and military receipt protocols, with ownership and risk transferring only upon arrival at the assigned APO address. The NAICS code 488999 indicates this is a specialized logistics support service outside standard freight categories, likely involving secure, tracked, and time-sensitive transport for Department of Defense medical supply needs. This subcontract is issued by the Medical Supply Chain FSH under the Department of Defense and was posted on July 20, 2026, with a response deadline of July 27, 2026. The place of performance is strictly defined as the APO box address, requiring precise alignment with U.S. military postal guidelines for overseas delivery. No specific set-aside provisions are listed, and the procuring office information is incomplete, but the solicitation number SPE2DH26T5299 and official DIBBS platform link confirm its legitimacy within federal contracting systems. Vendors must ensure complete compliance with all military logistics standards, including documentation, tracking, and delivery confirmation, as failure to meet FOB Destination requirements may result in rejection or financial liability.
All Other Support Activities for Transportation

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)The contract requires implementation of NIST SP 800-171 safeguards to protect Controlled Unclassified Information (CUI) and the ongoing maintenance of cyber incident reporting capabilities as mandated by DFARS 252.204-7012. This subcontract is focused on ensuring that all systems and processes handling CUI meet federal cybersecurity standards, including the deployment of technical, administrative, and physical controls to prevent unauthorized access, disclosure, or alteration of sensitive information. Continuous compliance is expected, with immediate reporting of any cyber incidents affecting CUI in accordance with federal requirements. The solicitation is issued under the NAICS code 541512 for Computer Systems Design Services and is tied to the Department of Defense through the Medical Supply Chain FSH. Performance is to be conducted at APO, ZIP 09227-0000, indicating potential deployment in a military or overseas operational environment. The response deadline is set for July 27, 2026, with the posting date of July 20, 2026, indicating a tight seven-day window for submission. The contract is structured as a subcontract, emphasizing its role within a broader defense or federal supply chain framework, and all participating entities must be prepared to demonstrate rigorous adherence to CUI protection protocols and incident response protocols without exception.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and DocumentationThe contract requires strict adherence to OSHA’s Hazard Communication Standard for all hazardous materials involved in cabinet production or preservation processes, ensuring proper labeling, safety data sheets, and employee training are maintained throughout operations. The work is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through its Medical Supply Chain FSH entity, with the place of performance located at APO 09227-0000. All activities must comply with federal safety regulations concerning the identification, handling, and documentation of hazardous substances to protect worker health and ensure regulatory compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for submissions. There is no set-aside designation specified, and the contract does not include a point of contact, suggesting potential reliance on the DIBBS portal for correspondence. Contractors are expected to demonstrate robust systems for managing hazardous material documentation and safety protocols as part of their proposal, with full compliance mandatory for contract execution. The work is tied to military medical supply logistics, implying that any noncompliance could impact broader defense operations.
Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Medical Item Labeling and Marking ComplianceThis contract requires compliance with Medical Marking Standard No. 1 for the labeling and marking of durable medical items, effectively replacing the outdated MIL-STD-129 standard for all medical-related applications. The work involves applying precise, durable markings to ensure accurate identification, tracking, and inventory management within the military medical supply chain, adhering strictly to the new standard’s technical and logistical requirements. All subcontractors must ensure their marking processes meet the specified durability, legibility, and format criteria to support seamless integration into existing defense medical logistics systems. The contract is issued under NAICS code 339999 for other miscellaneous manufacturing and is classified as a subcontract within the Department of Defense’s Medical Supply Chain FSH framework. Responses are due by July 27, 2026, with a posted date of July 20, 2026, indicating a tight seven-day window for submission. Performance is expected to occur at APO 09227-0000, underscoring the global nature of the supply chain and the need for consistent marking standards across forward-deployed and expeditionary medical environments. Participation requires full understanding and implementation of the new standard without reliance on legacy military specifications.
All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for narcotic control cabinets in strict compliance with MIL-STD-2073-1E standards to ensure resilience and functionality throughout military logistics operations. The work must safeguard sensitive medical equipment against environmental degradation, physical damage, and contamination during transport and storage, meeting the rigorous durability requirements mandated by the Department of Defense. The packaging must preserve the operational integrity of the cabinets and support long-term storage under varied climatic and logistical conditions typical of military supply chains. This subcontract is issued under the NAICS code 561910 and is designated for performance at APO 09227-0000, reflecting its alignment with deployment-focused logistics networks. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, emphasizing the critical nature of the packaged items in maintaining secure, controlled medical protocols in operational environments. All subcontractors must demonstrate proven expertise in military-grade packaging systems and full adherence to federal preservation standards without deviation.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339920
New
DIBBS
Supply of Narcotic Control Cabinets (Double Locking)The contract is for the procurement and delivery of narcotic control cabinets featuring double locking mechanisms that meet both military and medical standards, ensuring secure storage of controlled substances in high-sensitivity environments. The items must comply with stringent regulatory requirements to safeguard against unauthorized access, tampering, or diversion, making them essential for secure pharmaceutical handling within military medical facilities. The cabinets are intended for use at a U.S. military installation located at APO with a ZIP code of 09227-0000, indicating deployment in overseas or expeditionary medical settings where strict control protocols are mandated. This is a subcontract issued under NAICS code 339920, specifically for other medical and dental equipment manufacturing, and is managed by the Department of Defense through the Medical Supply Chain FSH. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a standard seven-day window for bids. Interested parties must submit proposals by the deadline through the DIBBS portal, as no point of contact or set-aside specifications are provided, and the award will likely be based on compliance with technical requirements, security certifications, and delivery timelines rather than cost alone, given the critical nature of the equipment for patient safety and regulatory adherence.
Sporting and Athletic Goods Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details