Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

LATCH, DOOR, VEHICULAR

Open
SPE7L4-27-T-1109Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This Request for Quotations (RFQ) issued by the DLA Weapons Support LSO Combat Vehicles and Armament is for the procurement of one vehicular door latch, identified by NSN 2540-01-723-1688. The acquisition is designated as a small business set-aside under NAICS code 336360. The required delivery date is October 26, 2026, with a delivery timeline of 10 days after award. The item is to be delivered FOB destination to the 0087 CS BN CO A Composite at Fort Stewart, Georgia, and must be shipped via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and the Hazard Communication Standard. Environmental restrictions prohibit the use of Class I ozone depleting chemicals. Administratively, the contractor must use the Wide Area WorkFlow (WAWF) system for invoicing. Key regulatory clauses include DFARS 252.204-7012 for cybersecurity reporting, DFARS 252.225-7001 for the Buy American program, and a prohibition on the use of additive manufacturing processes unless specifically authorized. Inspection and acceptance will occur at the destination per FAR 52.246-2.

General Info

DLA RFQ for one vehicular door latch for delivery to Fort Stewart.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

336360 - Motor Vehicle Seating and Interior Trim Manufacturing

Place of Performance

BLDG 1509 WEST 6TH STREET, FORT STEWART, GA, 31314-5185, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT
Office AddressUSA
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LATCH,DOOR,VEHICULAR
LATCH,DOOR,VEHICULA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
BUYERS PRODUCTS COMPANY DBA 9X737 P/N LL90003
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018894577 0001 EA 1.000
NSN/MATERIAL:2540017231688
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7L4-27-T-1109
SECTION B
PR: 7018894577 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
MARKFOR
W33RBS
0087 CS BN CO A COMPOSITE
AWCF SSF
BLDG 1509 WEST 6TH STREET
FORT STEWART GA 31314-5185
US
M/F: (TCN) W33RBS62810124
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:10/26/2026
SPE7L4-27-T-1109 NSN/Part Number: 2540-01-723-1688 Quantity: 1 EA Purchase Request: 7018894577QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336360
New
DIBBS
VENTILATOR, AIR CIRCULA
Solicitation # SPE7L4-27-T-1116
The Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament is soliciting the procurement of 20 air circulating ventilators under NSN 2540-01-675-5058. This small business set-aside solicitation, numbered SPE7L4-27-T-1116, requires delivery within 125 days after receipt of order. The items must be produced according to specific technical drawings and quality assurance standards, including basic drawing 19207 12601372 and reference drawing 19207 12593834. Inspection and acceptance are conducted at the point of origin, and the contract utilizes the First Destination Transportation program, requiring offers to be submitted based on FOB Origin. The contract imposes strict cybersecurity and data protection requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must adhere to MIL-STD-129 and DLA master list requirements, with specific labeling for hazardous materials per 29 CFR 1910.1200. Additionally, the procurement is subject to the Berry Amendment and Buy American Act, and all invoicing must be processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
ARMOR, SUPPLEMENTAL, SMA
Solicitation # SPE7L1-27-T-4381
Solicitation SPE7L1-27-T-4381 is a fixed-price, small business set-aside contract issued by the DLA Weapons Support Land Supply Chain for the acquisition of eight units of supplemental armor designed for small arms and fragmentation protection. The required items are identified by NSN 2540-01-741-5836 and associated with Leading Technology Composites Inc part number 29923-41. Delivery is required within 137 days after receipt of order, with a need ship date of April 6, 2027, and a required delivery date of April 18, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001 requirements. Key restrictions include a total prohibition on Class I ozone-depleting chemicals and a restriction against using additive manufacturing processes unless specifically authorized. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and offerors must maintain valid registrations in the System for Award Management.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BELT, VEHICULAR SAFETY
Solicitation # SPE7L4-27-T-1104
Solicitation SPE7L4-27-T-1104, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a Small Business Set-Aside for the procurement of 115 vehicular safety belts (NSN 2540-01-520-6737). The contract requires adherence to specific technical drawings, including Basic Drawing 19207 12414451 and related reference drawings. Delivery is set for a period of 231 days, with a need ship date of May 10, 2027, and a required delivery date of March 6, 2028. The items must be delivered FOB Origin to DLA Distribution Red River in Texarkana, Texas, with inspection and acceptance also occurring at the origin. The contract mandates a First Article Test (FAT) for one unit, requiring the contractor to provide written notice 14 days prior to shipment and submit a test report within 30 days of the contract date. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and the use of Class I ozone-depleting chemicals is strictly prohibited. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AK15206737. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous materials, and the Buy American Act.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
Supply of Vehicular Mirror Heads (NSN 2540016583809)This subcontract involves the supply of 12 vehicular mirror heads, specifically identified by NSN 2540016583809, for prime contractors working with the Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament. The selected provider must either manufacture or source the parts and ensure strict adherence to DLA Master List Technical and Quality Requirements, specifically those designated by R or I numbers. Performance of the contract requires the provider to maintain a valid CAGE code and UEI. Packaging must be completed according to ASTM D3951 commercial standards or TQ requirement IP025 for hazardous materials. The place of performance is located in Barstow, California, with a response deadline set for November 16, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
Manufacturing of Vehicular Seats (NSN 2540-01-414-1245)This HUBZone set-aside subcontract involves the manufacturing of 57 vehicular seats for the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament project. The scope of work requires the fabrication of seat frames and assemblies, including the integration of cushioning and upholstery, while strictly adhering to source-controlled drawings and the DLA Master List of Technical and Quality Requirements. To successfully execute the contract, the provider must possess specialized equipment for precision metal fabrication and textile and foam integration. The project is governed by strict regulatory standards, including compliance with Buy American mandates and DFARS cybersecurity protocols. Performance will take place in Texarkana, Texas, under NAICS code 336360. Interested parties must respond by November 16, 2026, to provide the completed units as specified in the technical requirements.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
Vehicular Safety Belt Manufacturer/SupplierThis subcontract opportunity is for a manufacturer or supplier to provide 190 vehicular safety belts to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. All supplied units must strictly comply with NSN 2540-0171-82949 and the DLA Master List of Technical and Quality Requirements, with delivery terms set as FOB Origin. The procurement is designated as a Total Small Business Set-Aside under NAICS code 336360. Interested parties must submit their responses by November 16, 2026, for performance located in New Cumberland, Pennsylvania.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
Vehicular Seat Back Cushion Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 215 vehicular seat back cushions for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The cushions must be produced according to the technical specifications of NSN 2540-01-5000541, utilizing automotive-grade upholstery, foam, and interior components. The contractor is required to maintain strict compliance with domestic origin requirements and adhere to MIL-STD-2073-1E packaging standards. This procurement falls under NAICS code 336360, with a response deadline set for November 20, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
BELT, VEHICULAR SAFETY
Solicitation # SPE7L4-27-T-0973
Solicitation SPE7L4-27-T-0973 is a request for quotations issued by the DLA Weapons Support, LSO Combat Vehicles and Armament for the procurement of 73 vehicular safety belts under NSN 2540-01-360-6538. This acquisition is designated as a Small Business Set-Aside and requires submission via the DLA Internet Bid Board System. The required delivery date is May 27, 2027, with a need ship date of May 4, 2027. Shipping is handled as FOB Origin, with the destination for inspection and acceptance located at DLA Distribution Red River in Texarkana, Texas. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Compliance with the Buy American Act and the Berry Amendment is required for all quotes above the micro-purchase threshold. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and contractors must maintain active registration in the System for Award Management. Special provisions are included for the handling of hazardous materials and the safeguarding of covered defense information per DFARS 252.204-7012.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7L4-27-T-0980
Solicitation SPE7L4-27-T-0980, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is for the procurement of four vehicular seats under NSN 2540-01-413-1362. The contract requires the items to be manufactured according to TDP Rev B Gen 2 and specific reference drawings, with a delivery timeline of 258 days and a need ship date of May 4, 2027. The place of performance is Tracy, California, and the shipment is handled under the First Destination Transportation program with FOB Origin terms. The contract mandates strict quality and security compliance, including CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls. Quality assurance requires origin inspection and acceptance, with a mandatory First Article Test report due within 60 calendar days of the contract date. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all financial transactions must be processed through the Wide Area WorkFlow system. This procurement is designated as a total small business set-aside under NAICS 336360.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
BELT, VEHICULAR SAFETY
Solicitation # SPE7L4-27-T-0992
Solicitation SPE7L4-27-T-0992, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a small business set-aside for the procurement of vehicular safety belts under NSN 2540-01-577-4295. The contract consists of two line items totaling 19 units, with 7 units designated for delivery to DLA Distribution Barstow and 12 units for DLA Distribution Albany. The required delivery date is January 27, 2027, with a delivery period of 168 days ADO. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and TQ requirement IP025. Key regulatory requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 regarding cybersecurity and cyber incident reporting. All vendor payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
MAT, FLOOR
Solicitation # SPE7L4-27-T-0946
The Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament is soliciting the procurement of 153 rubber floor mats under solicitation SPE7L4-27-T-0946. The items, identified by NSN 2540-01-298-8449, are to be delivered to DLA Distribution Red River in Texarkana, Texas, with a delivery lead time of 168 days after order. The need ship date is May 4, 2027, and the final required delivery date is August 9, 2027. All quotes must be submitted via the DLA Internet Bid Board System by November 16, 2026. This contract is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and specific DLA training to access technical data. Compliance with the Buy American Act and Berry Amendment is required for quotes above the micro-purchase threshold. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials labeling under 29 CFR 1910.1200. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 336360
New
DIBBS
COUPLER, DRAWBAR, RING
Solicitation # SPE7L4-27-T-1056
Solicitation SPE7L4-27-T-1056, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a small business set-aside for the procurement of two ring drawbar couplers (NSN 2540-01-737-7079). The requirement is identified as a commercial item with a required delivery date of October 28, 2026, and a delivery window of five days after award. The contract specifies FOB Origin terms, with the final destination for inspection and acceptance located at the Portsmouth Naval Shipyard in Kittery, Maine. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA packaging requirements RP001. Hazardous materials must be packaged per TQ requirement IP025 and labeled according to the Hazard Communication Standard, while non-hazardous materials must follow ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 332322
New
DIBBS
Electrical Connector Bracket Supply
Sheet Metal Work Manufacturing

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Supply of Critical Application Flat Washers
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332812
New
DIBBS
Gear Heat Treatment and Surface FinishingThis subcontract for Gear Heat Treatment and Surface Finishing supports DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected contractor will provide heat treating, grinding, and specialized coating services for spur gears, utilizing industrial furnaces and precision grinding equipment to apply surface treatments according to NSN technical data. A critical environmental requirement is the total prohibition of hexavalent chromium in all plating processes. The performance of this contract will take place in Texarkana, Texas. To ensure high quality and precision, the contractor must maintain compliance with ISO 9001 or SAE AS9003 quality systems. The final deliverables consist of finished, treated, and inspected spur gears delivered to the prime contractor.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
Raw Material Supply for Spur Gear FabricationThis subcontract involves the supply of certified raw alloy or metal stock intended for spur gear fabrication on DLA Weapons Support projects. The selected provider must source and deliver materials that strictly adhere to the chemical and physical properties outlined in the technical data package for NSN 30200153901. Performance for this contract will take place in Texarkana, Texas, under NAICS code 331210. Crucial compliance requirements include the provision of Mill Test Reports and formal certifications confirming that the materials are free from hexavalent chromium and Class I ozone-depleting chemicals. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, for the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
Spur Gear Fabrication (NSN 3020015397901)This subcontract involves the precision machining and manufacturing of four spur gears for prime contractors supporting DLA Weapons Support projects. The fabrication must strictly adhere to NSN 3020015397901 and the DLA Master List of Technical and Quality Requirements, utilizing specialized gear cutting and hobbing machinery. Performance will take place in Texarkana, Texas. To qualify, the provider must maintain SAE AS9003 or ISO 9001 quality systems and ensure full DFARS cybersecurity compliance. The final deliverable consists of four completed spur gears that meet all established technical specifications. The response deadline for this opportunity is November 19, 2026.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
Supply of Straight Axles (NSN 3040-01-392-3875)
Mechanical Power Transmission Equipment Manufacturing

POSTED

43 minutes ago

DEADLINE

in 15 days
View Details
NAICS: 488510
New
DIBBS
Military Packaging and Shipping ServicesThis subcontract for Military Packaging and Shipping Services supports prime contractors delivering to the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work involves providing comprehensive packaging and logistics services, specifically requiring items to be packed according to ASTM D3951 and TQ requirement IP025. Additionally, the contractor must palletize shipments per RP001 and ensure all markings comply with MIL-STD-129. The contractor is responsible for managing all shipping documentation for the delivery of 33 palletized and labeled units to DLA Distribution San Joaquin. Performance will take place in Tracy, California, under NAICS code 488510. The response deadline for this opportunity is November 19, 2026.
Freight Transportation Arrangement

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332812
New
DIBBS
Surface Treatment and Coating for Stowage BoxesThis subcontract involves providing specialized surface treatment and industrial coating services for 33 stowage boxes supporting DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes degreasing and the application of military-grade primers and topcoats, with a strict requirement to avoid the use of Class I ozone-depleting chemicals. All deliverables must undergo rigorous verification of coating thickness and adhesion to ensure full compliance with military specifications. The project is managed under NAICS code 332812 and will be performed in Tracy, California. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense requirement.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
Fabrication of Accessories Stowage BoxesThis subcontract involves the fabrication, forming, and assembly of 33 metal stowage box shells for prime contractors supporting DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires cutting, bending, and welding metal sheets using CNC press brakes and TIG/MIG welding to ensure strict adherence to Technical Data Package Rev A Gen 1, Basic Drawing 19207 12524681. All deliverables must comply with MIL-STD-1916 quality assurance standards. The project is categorized under NAICS code 332312 and will be performed in Tracy, California. The response deadline for this requirement is November 19, 2026.
Fabricated Structural Metal Manufacturing

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 336311
New
DIBBS
Manufacturing and Supply of Vehicular Structural Frame Sections
Carburetor, Piston, Piston Ring, and Valve Manufacturing

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 488490
New
DIBBS
Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services supports prime contractors on DLA Weapons Support projects under the Department of Defense. The selected provider will perform specialized packaging and preparation for shipment, ensuring all items adhere to ASTM D3951 standards and that marking and labeling comply with MIL-STD-129. The scope of work involves delivering packaged and labeled components ready for transport, with shipments coordinated FOB Origin to DLA Distribution San Joaquin in Tracy, California. This opportunity falls under NAICS code 488490 and requires responses by November 19, 2026.
Other Support Activities for Road Transportation

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
Berry Amendment Compliant Raw Material SupplyThis subcontract involves the sourcing and delivery of raw metal and alloy stock to support prime contractors working on DLA Weapons Support projects. The supplier is responsible for providing materials that strictly adhere to Drawing NR 19207 12612820 specifications and delivering the certified stock directly to the designated fabricator. A critical requirement of this agreement is the provision of full traceability and certification of origin to ensure compliance with the Berry Amendment and the Buy American Act. The performance of this contract is centered in Tracy, California, under the oversight of the Department of Defense and the DLA Weapons Support LSO Combat Vehicles and Armament.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

43 minutes ago

DEADLINE

in 11 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS