Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LATCH, LOWER

Active
SPE4A7-26-T-694YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of one lower latch, identified by NSN 5342-01-217-3259. The contract requires delivery within 20 days after receipt of the order. The solicitation number is SPE4A7-26-T-694Y, with a response deadline of September 3, 2026. The agreement is subject to strict technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the contract involves covered defense information and requires CMMC Level 2 certification. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, meaning access is limited to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.

General Info

DoD procurement of one lower latch (NSN 5342-01-217-3259) requiring CMMC Level 2 certification.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-694Y RFQ

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
JOHANNA CRUZ CRUZ
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LATCH, LOWER
LATCH, LOWER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5342-01-217-3259 Quantity: 1 EA Purchase Request: 7018061230QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
SIGHT, FRONT
Solicitation # SPE7L1-26-T-966D
This contract, solicitation number SPE7L1-26-T-966D, is for the procurement of 275 units of front sights, identified by NSN 1005-01-689-7880 and Heckler & Koch Defense Inc. part number 51000246. The requirement is designated as a critical application item and is set aside for total small business. Delivery is required within 452 days, with an original required delivery date of August 12, 2026, and a need ship date of November 20, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing supply chain traceability documentation and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. Inspection and acceptance will take place at the destination. The procurement is managed by the Department of Defense Land Supply Chain agency under NAICS code 332994.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
CLEVIS, ADJUSTABLE
Solicitation # SPE4A7-26-T-669Z
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 60 adjustable clevises, identified by NSN 5342-01-166-0578. The contract requires delivery within 170 days after the order is placed and specifies that all items must adhere to DLA packaging requirements for procurement. Due to the nature of the technical data involved, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required DOD export-controlled technical data training and questionnaire. Performance of this contract will take place in New Cumberland, Pennsylvania.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A7-26-T-694Z
This contract is for the procurement of 30 units of grooved clamp couplings, identified by NSN 5342-01-132-0673 and part number 7M765-20D. The item is designated as a critical application item and is source-controlled, requiring strict adherence to McDonnell Douglas Corporation drawing 7M765, Revision L. Hydraflow is listed as an approved source for this component. The agreement specifies a delivery timeframe of five days and requires shipping to the Commanding Officer of 7 CFSD in Edmonton, Alberta, Canada. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. The contract incorporates DLA master technical and quality requirements, including specific protocols for configuration change management and physical item marking.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
MOUNT, GUN
Solicitation # SPE7L3-26-U-0680
This Request for Quotations (RFQ) issued by DLA Land and Maritime is for a fixed-price, unilateral Simplified Indefinite-Delivery Contract (SIDC) to procure 74 gun mounts (NSN 1005-01-323-7552). The contract has a maximum value of $350,000 and is subject to a Service-Disabled Veteran-Owned Small Business (SDVOSB) and Small Business set-aside cascade. Deliveries are required within 217 days after order acceptance, with terms set at FOB Origin. The procurement is governed by strict technical and quality standards, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. All items must be manufactured in accordance with specific Technical Data Package (TDP) Rev B Gen 2 reference drawings. The contract includes rigorous compliance requirements regarding cybersecurity, export control, and domestic sourcing. Contractors must adhere to Cybersecurity Maturity Model Certification (CMMC) Level 2 standards and safeguard covered defense information. Technical data is subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program (JCP) certification for access. Furthermore, offerors must comply with the Berry Amendment, the Buy American Act, and other domestic material restrictions. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS).
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEA
Solicitation # SPE4A7-26-T-660T
Solicitation SPE4A7-26-T-660T is a fixed-price request for quotations issued by DLA Aviation for the procurement of seven resilient weapon system mounts, identified as critical application items. The required hardware corresponds to NSN 5342006850612 and part number K1092-1/02 from Hutchinson Aerospace & Industry, Inc. This acquisition is a total small business set-aside under NAICS code 332994. The delivery timeline is set for 171 days after order, with a need ship date of February 12, 2027, and an original required delivery date of July 17, 2027. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and security standards, including a CMMC Level 2 self-assessment and compliance with the Buy American Act and Berry Amendment. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, hazardous material identification, and the prohibition of covered defense telecommunications equipment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
REPAIR RECOIL ADAPT
Solicitation # SPE7L3-26-T-205R
This contract, solicitation number SPE7L3-26-T-205R, is for the repair of recoil adapters, specifically NSN 1090-01-735-8193, with a total quantity of 56 kits. The requirement is issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency. Delivery is required within 170 days, with a need ship date of February 26, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and demilitarization standards for small arms weapons and parts. It prohibits the use of Class I ozone-depleting chemicals and specifies that surplus items are not acceptable. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, and palletization must follow DLA packaging requirements. Item Unique Identification is not required for this specific order.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
RING, CABLE SEAL RES
Solicitation # SPE4A7-26-T-658V
Solicitation SPE4A7-26-T-658V is a request for quotations issued by DLA Aviation for the procurement of 231 packages of Ring, Cable Seal Restraining, identified by NSN 5342-00-084-0375. This item is designated as a critical application item and is identified as a commercial product. The unit of issue has been updated to five units per pack. Technical specifications are governed by TDP Rev B Gen 2, specifically basic drawing NR 81205 BACS11L Revision G and reference drawing NR 81205 D-590 Revision F. Delivery is required at the DLA Distribution Depot in Tinker AFB, Oklahoma, with a need ship date of February 12, 2027, and an original required delivery date of May 9, 2027. The contract mandates strict quality and compliance standards, including manufacturer inspection systems that comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with zero non-conformances required for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization follows RP001. The solicitation includes significant regulatory requirements, such as CMMC Level 2 certification, ITAR and EAR export controls for technical data, and compliance with the Buy American Act and Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Offers involving additive manufacturing are ineligible for award unless specifically authorized.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-665N
Solicitation SPE4A7-26-T-665N is a fixed-price request for quotations issued by DLA Aviation for the procurement of 145 units of a resilient weapon system mount, identified as NSN 5342-01-405-9950. This item is classified as a critical application commercial item and must be manufactured according to Naval Air Systems Command Drawing 1935AS456. The required delivery date is May 11, 2027, with a need ship date of February 12, 2027, and a delivery timeframe of 171 days after order. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-129 for marking and RP001 for packaging. Inspection and acceptance will occur at the destination, utilizing sampling methods from MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to Buy American Act and Berry Amendment domestic sourcing restrictions. The solicitation is not a small business set-aside and falls under NAICS code 332994.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
RETAINER, ROD END LOCKI
Solicitation # SPE7M4-26-T-366X
This contract is for the procurement of 69 units of rod end locking retainers, identified as part number NAS1193K5C and NSN 5340-00-915-2368. This is a critical application item classified as a commercial product, subject to full and open competition. The order is managed by the Department of Defense Fluid Handling Division, with delivery required at DLA Distribution San Diego. The delivery timeline is set for 156 days after order, with a need date of February 12, 2027. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-PRF-23199E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Additionally, the contract enforces a strict mercury-free requirement, prohibiting the intentional addition of mercury or mercury compounds in the hardware, preservation, or packaging.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
HINGE HALF, LOWER
Solicitation # SPE4A7-26-T-694S
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of three lower hinge halves under part number 5342-01-226-1055. The contract requires delivery within 86 days after receipt of order and is categorized under NAICS code 332994. Performance is centered in New Cumberland, Pennsylvania, with the primary point of contact being Keyanna McNeil-Johnson. The agreement is subject to rigorous technical and quality standards as defined in the DLA Master List, including specific requirements for packaging, source approval, and configuration change management. Notably, the contract mandates compliance with CMMC Level 2 certification and strict export controls under ITAR and EAR regulations. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-controlled training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BRUSH, CLEANING, ARTI
Solicitation # SPE7L1-26-T-968K
This solicitation, identified as SPE7L1-26-T-968K, is issued by the Department of Defense Land Supply Chain for the procurement of 45 units of 120mm cleaning and bore brushes under NSN 1015-01-583-3785. The contract requires delivery within 120 days after the order is received and specifies performance in Bremerton, Washington. The agreement is subject to rigorous technical and quality standards, including CMMC Level 2 cybersecurity assessments and strict adherence to DLA packaging and marking requirements. Because the items fall under Category I munitions, the contract mandates specific demilitarization protocols and strict export controls under ITAR and EAR regulations. Additionally, the supplier must comply with qualified products and manufacturers lists and ensure that all technical data is handled according to US/Canada Joint Certification Program standards.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
COVER
Solicitation # SPE7L7-26-T-4973
This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of one unit of a cover, identified by NSN/Part Number 1020-01-176-9939. The contract requires delivery within 20 days after receipt of the order. The solicitation, numbered SPE7L7-26-T-4973, was posted on August 26, 2026, with a response deadline of September 8, 2026. The agreement incorporates several strict technical and quality requirements, including CMMC Level 2 cybersecurity assessments and specific DLA packaging and marking standards. It emphasizes rigorous quality control through inspection and acceptance at origin and configuration change management. Additionally, the contract contains stringent export control mandates under ITAR and EAR regulations, restricting the disclosure of technical data to authorized personnel and requiring approved JCP certification for access.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
HINGE, NACELLE PANEL
Solicitation # SPE4A7-26-T-658K
Solicitation SPE4A7-26-T-658K is a fixed-price request for quotations issued by DLA Aviation for the procurement of nacelle panel hinges, identified by NSN 1560-00-023-9397 and part number 65302-12003-114. The requirement consists of two line items totaling 15 units, with 2 units destined for DLA Distribution Cherry Point and 13 units for DLA Distribution San Diego. The need ship date is February 12, 2027, with an original required delivery date of June 25, 2027. Delivery terms are FOB Origin, and the government will utilize Government-Arranged Transportation under the First Destination Transportation program. The items are designated as critical application items and must be manufactured according to drawing 65302-12003, with specific exceptions regarding the use of Sikorsky and MIL specifications for materials and finishes. Quality assurance requires compliance with ISO 9001:2015 and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and IP025. The contract incorporates strict regulatory compliance, including CMMC Level 2 Self-Assessment, the Buy American Act, and the Berry Amendment. Inspection and acceptance will occur at the destination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-667E
Solicitation SPE4A7-26-T-667E is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of 44 sleeve bushings identified by NSN 5365016762949. The requirement is categorized under NAICS code 332119. Delivery is expected within 171 days of award, with a need ship date of February 12, 2027, and an original required delivery date of April 4, 2027. The items are to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements per RP001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing and payment processing are to be managed through the Wide Area WorkFlow system.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A7-26-T-658P
Solicitation SPE4A7-26-T-658P is a Request for Quotations issued by DLA Aviation for the procurement of 159 pounds of solid rivets under NSN 5320001175853. The items are classified as critical application hardware and must be manufactured in accordance with TDP Rev D Gen 4, specifically referencing drawing 13873 EI-001175853 and non-government standard NASM5674 Revision 2. Delivery is required within 171 days, with a need ship date of February 12, 2027, and an original required delivery date of May 18, 2027. The terms are FOB Origin, with both inspection and acceptance occurring at the origin. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance must adhere to SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331, emphasizing a zero-nonconformance acceptance policy. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act and Berry Amendment, and specific preferences for certified HUBZone small businesses.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
BELT, V, 2-BAND, AIRCR
Solicitation # SPE4A7-26-T-666F
Solicitation SPE4A7-26-T-666F is a fixed-price request for quotations issued by DLA Aviation for the procurement of 13 aircraft V-belts, identified by NSN 1680015193510 and Rix Industries part number 41-B82-2. The delivery is required within 171 days after the award, with shipping terms set as FOB Origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires zero non-conformances in sample lots, with sampling methods following MIL-STD-1916 or ASQ H1331. Technical requirements are governed by the DLA Master List, and the contractor must comply with the Buy American Act and the Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area Workflow system. Additionally, the solicitation prohibits the use of additive manufacturing unless authorized and forbids the use of mercury or mercury compounds in packaging.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A7-26-T-670Q
This contract is for the procurement of 478 shear bolts, specifically part number NAS6206-7, identified by NSN 5306-01-157-9938. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of the applicable AIA/NAS part standards. Quality assurance requires inspection and acceptance at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Marking and identification must comply with MIL-STD-130 and SAE AS478, while dimensions and tolerances follow ASME Y14.5. Delivery is set for 158 days after order, with a required delivery date of December 17, 2026, and a need ship date of January 31, 2027. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. The items are to be shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. This acquisition is managed by the Department of Defense under solicitation SPE4A7-26-T-670Q.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A7-26-T-662M
Solicitation SPE4A7-26-T-662M is a Request for Quotations issued by the Defense Logistics Agency for the procurement of grooved clamp couplings, identified by NSN 5342010487743. The requirement consists of multiple line items totaling 93 units, with specific quantities distributed across four CLINs, including 69 units for CLIN 0004. Deliveries are scheduled for various DLA distribution centers in Utah, California, Georgia, and Pennsylvania, with a need ship date of February 12, 2027, and an original required delivery date of May 9, 2027. The delivery timeframe is specified as 171 days after order. The contract is established as a commercial item procurement with FOB Origin terms for both inspection and acceptance. Technical and quality compliance is governed by the DLA Master List, with manufacturers required to maintain inspection systems meeting SAE AS9003 or ISO 9001 standards. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001 requirements. Notably, the contract strictly prohibits the use of mercury or mercury compounds in preservation, packaging, and marking. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
FRAME, AIRCRAFT
Solicitation # SPE4A7-26-T-694U
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of seven aircraft frames, identified by NSN 1560-01-162-0917. The contract requires delivery within 100 days after receipt of order, with performance taking place at Tinker AFB. The solicitation was posted on August 26, 2026, with a response deadline of September 3, 2026. Due to the nature of the technical data involved, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Unauthorized disclosure to foreign persons or nationals is prohibited, and compliance with DFARS 252.225-7048 is mandatory.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A7-26-T-663L
Solicitation SPE4A7-26-T-663L is a request for quotations issued by DLA Aviation for the procurement of 4,000 dial indicating pressure gages, identified by NSN 6685012298889. The requirement specifies a range of 0-300 with a 4.5 inch dial. Delivery is set as FOB Origin under the First Destination Transportation program, with a need ship date of February 12, 2027, and an original required delivery date of April 18, 2027. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special marking code for delicate instruments. Inspection and acceptance will occur at the destination. Quality assurance sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions per NAVSEA 5100-003D. Offerors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and submit quotations via the DLA Internet Bid Board System.
Other Measuring and Controlling Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-670D
This contract is for the procurement of 293 machine thread plugs, identified by NSN 5365013057067. The order is designated as a critical application item and must adhere to specific technical and quality requirements set forth in the DLA Master List. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The material does not have a shelf life requirement. Delivery is required within 170 days, with a need ship date of February 12, 2027, and an original required delivery date of June 7, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements. The contract allows for zero quantity variance.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-694L
This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of two elevator fairing assembly strip inboard ends under part number 0001S00000052. The contract requires delivery within 486 days after the order is placed and is associated with NAICS code 336413. Performance will take place at Robins Air Force Base. The contract is subject to stringent security and quality mandates, including Covered Defense Information and CMMC Level 2 certification. It incorporates various DLA master technical and quality requirements, specifically regarding packaging, physical identification, and inspection at origin. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details