This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 7, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

[LCS Fund Project] Preventive Maintenance of Paint Booth Equipment at Kunsan AB, ROK

Closed

W90VN7-21-R-0024Federal

Submission Closed06/11/2021, 04:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for a fee-for-service, lump sum contract to provide panic hardware installation services for electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project requires the contractor to bypass internal lock mechanisms and install Grade I commercial-grade panic/crash bars, including matching exterior trim, rim cylinders, strikes, and door closers, across five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational areas. The scope includes conducting site surveys to verify door dimensions and fire-ratings, performing full door and frame replacements where necessary for double doors, and executing at least 10 consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and the Americans with Disabilities Act. This opportunity is set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. To be considered for award, bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification form, three references for similar projects, and applicable SBA certification letters by December 1, 2026. The contract incorporates various Federal Acquisition Regulation clauses, including requirements for minimum wages under Executive Order 14026, paid sick leave under Executive Order 13706, and restrictions on certain foreign purchases. Awardees will be required to provide proof of insurance and a 12-digit Unique Entity Identifier. Inspection and acceptance will be conducted by MTC or the Government at the designated point of delivery following the verification of smooth, continuous operation of the installed hardware.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

NODC Roll-Up Counter Shutter Replacement

Solicitation # SRC0000042163

Solicitation SRC0000042163 is a request for quotes for the turnkey replacement of a roll-up counter shutter in the building 610 canteen at the Northwest Ohio Developmental Center in Toledo, Ohio. The scope of work includes the removal and disposal of the existing shutter and the installation of one Wayne Dalton Rolling Counter Door, Model CFS-510. This specific model must be nonrated, clear anodized aluminum with flat slats for face of wall mounting, featuring a right-side hand-crank manual operation and pad-lockable slide bolts on both ends. The project is estimated to be effective from October 19, 2026, through June 30, 2027, with a mandatory site visit held on October 6, 2026, and a response deadline of October 16, 2026. Bids will be awarded to the lowest responsive and responsible bidder. To be considered, bidders must submit a formal quote via OhioBuys, including a completed item grid for parts and labor, a Contractor Information Form, and a Standard Affirmation and Disclosure Form. Bidders may also submit a Contractor Certification Statement Form to claim preferences for Buy American, Buy Ohio, or Veteran Friendly Business Enterprise status. The awarded contractor must comply with Ohio Prevailing Wage Laws, ADA and Rehabilitation Act standards, and strict site conduct policies, including OSHA-approved barricading and a zero-tolerance drug and alcohol policy. Additionally, all personnel performing work on-site must meet specific criminal background and conduct requirements under the Ohio Revised Code.

Developmental Centers, Ddd207000 Northwest Ohio Dc Nwdc

POSTED

DEADLINE

IFB No. 133713 FMS 25 Multiple Roll-up Door Repairs and Preventative Maintenance, Hammer Field Armory

Solicitation # 133713

The California Military Department is soliciting bids under IFB No. 133713 for comprehensive repairs and five-year preventative maintenance of multiple roll-up doors at the Hammer Field Armory (FMS 25) in Fresno, California. The scope of work includes targeted component replacement, safety and control system upgrades, and the full replacement of one door to ensure operational reliability. The selected contractor must possess a D-28 Doors, Gates and Activating Devices license and is allotted 120 calendar days to complete the project. Award will be granted to the lowest responsive responsible bidder, with a 25 percent Small Business participation goal and a 5 percent Disabled Veteran Business Enterprise (DVBE) goal. Prospective bidders were required to attend a mandatory pre-bid job walk on October 26, 2026. All bids must be submitted electronically as a single PDF by November 16, 2026, at 2:00 PM. Required documentation includes a rate sheet and various certifications, such as the Darfur and Iran Contracting Act forms, Payee Data Record, and Non-Collusion Affidavit. The contract mandates compliance with State General Prevailing Wage Rates, the Buy American Act for construction materials, and ADA standards. Payment will be processed electronically in arrears, with invoices submitted no more frequently than monthly and no less than quarterly. Bonding requirements apply if the bid or public works expenditure exceeds $24,999.99, requiring bid, payment, and performance bonds.

California Military Department

POSTED

DEADLINE

Commercial Sliding Door Technical ServicesThe Commercial Sliding Door Technical Services subcontract involves providing specialized technical labor and maintenance for sliding door systems on Collin County facility projects. The selected provider will work under prime contractors to inspect tracks, rollers, and automated operators, while performing general repairs and parts installation to ensure all systems are fully operational and safety-compliant. This opportunity is categorized under NAICS code 238290 and is managed by the Facilities agency in Texas. Interested parties must submit their responses by the deadline of November 12, 2026, following the posting date of October 19, 2026.

POSTED

DEADLINE

Garage and Overhead Door Technical ServicesThis subcontract for Garage and Overhead Door Technical Services involves providing specialized technical labor and preventive maintenance for Collin County facility projects. The selected provider will work under prime contractors to ensure door systems are operational and safety-compliant by inspecting and adjusting critical components, including operator limit switches, belts, rakes, springs, and gear reducers. Additionally, the scope includes checking safety labels, locks, slats, endlocks, guides, and weather-stripping. The contract requires the availability of repair labor during regular business hours as well as overtime and holidays to maintain facility standards. This opportunity falls under NAICS code 238290 and is managed by the Facilities agency in Texas. Interested parties must submit their responses by the deadline of November 12, 2026.

POSTED

DEADLINE

Process Equipment and InstrumentationThis subcontract for Process Equipment and Instrumentation involves the supply and installation of process equipment and control instrumentation for prime contractors working on Toronto and Region Conservation Authority pump station restoration projects. The scope of work includes installing equipment according to Process Narratives, preparing detailed panel layouts and wiring schematics, and conducting both Factory Acceptance Tests and Site Acceptance Tests in compliance with Section 13000 to ensure the delivery of fully commissioned equipment and control panels. The opportunity was posted on October 19, 2026, with a response deadline of November 13, 2026. Classified under NAICS code 238290, the contract is managed by the Toronto and Region Conservation Authority. Interested parties can find further details through the official bids and tenders portal.

Toronto and Region Conservation Authority

POSTED

DEADLINE

Contractor that shall provide comprehensive preventative maintenance, inspections, testing, minor repairs, and reporting services for 9 elevators at the MSDH Central Campus to ensure safe, reliable, and compliant operation in accordance with all applicabl

Solicitation # 1301-27-R-IFBD-00008-V01

The Mississippi State Department of Health is soliciting bids under solicitation number 1301-27-R-IFBD-00008-V01 for a contractor to provide comprehensive preventative maintenance, inspections, testing, minor repairs, and reporting for nine elevators at the MSDH Central Campus in Jackson, Mississippi. The anticipated period of performance is from January 6, 2027, to June 30, 2032, with a maximum cumulative duration of five years including potential one-year renewals. The scope of work includes monthly maintenance per manufacturer recommendations, annual safety inspections and full load testing, and 24/7 emergency callback services with a two-hour on-site response time. The base contract covers labor and parts for minor repairs up to 250 dollars per incident. All services must comply with ASME A17.1 Safety Code, ADA requirements, OSHA safety regulations, and State of Mississippi standards. The contract will be awarded to the lowest responsible and responsive bidder. To be deemed responsible, vendors must have at least five years of experience in similar services, be registered with the Mississippi Secretary of State, and hold a valid Mississippi Elevator Contractor License. Required insurance includes workers compensation and general or professional liability insurance with minimum limits of 1,000,000 dollars per occurrence, naming MSDH as an additional insured. Bids must be submitted electronically via the OpenGov Procurement portal by 2:00 pm CST on November 20, 2026. Payments will be made via the state's electronic remittance vehicle, with undisputed amounts typically paid within 45 calendar days of invoice receipt.

POSTED

DEADLINE

Historic Window Restoration and Installation

TBF01 - Town of Brimfield

POSTED

DEADLINE

Elevator Maintenance & Related Services (Columbus, OH & Dayton, OH)

Solicitation # 47PF5327Q0001

Pbs Facility Management East - Branch C

POSTED

DEADLINE

WTX Elevator Inspections and Load Testing Services

Solicitation # 36C25727Q0027

Solicitation 36C25727Q0027 is a firm-fixed-price contract issued by the Department of Veterans Affairs Network Contracting Office 17 for a comprehensive elevator compliance program at the West Texas VA Health Care System in Big Spring, Texas. The scope of work requires the provision of all labor, supervision, tools, and certified test weights to perform semi-annual third-party inspections and five-year Category 5 full-load testing. All services must adhere to ASME A17.1, A17.2, and A17.3 standards, VHA Engineering Policy SOP 34, and regulations from OSHA, NFPA, NEC, and the Joint Commission. The contract has a total performance duration not to exceed five years, with semi-annual inspections required every six months plus or minus 30 days. This acquisition is 100 percent set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 238290. Award will be based on the Lowest Priced Technically Acceptable (LPTA) procedure. To be considered technically acceptable, offerors must provide current QEI certificates for all inspectors and a list of three past performance references from the last three years for services of similar size and scope. Proposals must be submitted via email to the contracting specialist by November 5, 2026. Payment is processed via Electronic Funds Transfer and is contingent upon the acceptance of deliverables by the Contracting Officer's Representative.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Steel/Metal Structures and Site AmenitiesThis subcontract involves the supply and installation of metal structures and site amenities for prime contractors working on Virginia Department of Transportation highway improvement projects in Rockingham County. The scope of work includes the installation of steel and metal structures under SS407, the application of protective coatings per SS411, and the placement of site amenities such as trash receptacles and bicycle racks. The project requires strict adherence to Form C-21C regarding steel price adjustments. Interested parties must submit their responses by November 18, 2026, at 3:00 PM. The contract falls under NAICS code 238290 and focuses on the delivery of fully installed metal components and amenities.

Virginia Department of Transportation

POSTED

DEADLINE

Hydraulic Elevator Modernization - Car 1

Virginia Railway Express

POSTED

1 day ago

DEADLINE

in 28 days

General Info

Agency

Department Of Defense → 0906 Aq Co Det B Contracti

Contract Value

$94,770.05

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Set-Aside

NONE

Awardee

SUDO MACHINE INDUSTRY CO.LTD

Award Issued Date

01/23/2024, 12:00:00 AM UTC

Documents

Attachment+1_Bldg.+2820+Paint+Booth+Manufacturer+Information.docx

Attachment+2_Bldg.+2221+Paint+Booth+Manufacturer+Information.docx

QA+for+W90VN7-21-R-0024+Preventive+Maintenance+of+Paint+Booth.docx

W90VN7-21-R-0024+Preventive+Maintenance+of+Paint+Booth+Equipment.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedMay 21

Combined Synopsis

Notice updatedJun 7

Notice details unchanged. Attachments may have changed.

Response DeadlineJun 11

Deadline has passed

Submission Closed

06/11/2021, 04:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → 0906 Aq Co Det B Contracti

Contacts2 people available

OfficeAPO, AP, 96202-5273, USA

Organization / AgencyDepartment Of Defense → 0906 Aq Co Det B Contracti

Office AddressAPO, AP, 96202-5273, USA

Contacts

Ms. An Hye Son

contact@example.gov

Mr. Song Kil Chae

contact@example.gov

Full Description

NOTICE TO OFFEROR(S) LCS Funded Requirement. Only registered business entity in Korean Government may submit a proposal or quote as applicable IAW Republic of Korea (ROK)-United States (U.S.) Status of Forces Agreement (SOFA). Local Korean source eligibility shall be determined by the Contracting Officer and may reject a proposal or quote if the entity is(are) determined as Non- Korean business entity. 1. General: The Contractor shall furnish all personnel, equipment, tools, vehicles, materials, parts, and supervision to perform Inspection, Preventive Maintenance (PM), and On-Call Service of Paint Booth Equipment and Related Accessories located in various facilities of 8th Maintenance Squadron as defined in this Solicitation. 2.Background: 2.1 Corrosion Control Facilities: The facilities have complex ventilation systems to ensure the facilities comply with applicable environmental, fire protection, and occupational health requirements. These systems remove paint particulates, solvent vapors, and hazardous air pollutants from the ambient area of aircraft maintainers. Repair and maintenance of the associated air handling equipment is specialized and required to ensure the paint booth facilities remain in proper running order to apply corrosion preventative coating systems in accordance with Air Force Instructions. The paint booth facilities generate air flow through the industrial areas to ensure hazardous vapors and particulates are removed and collected in the filters prior to the air exiting the booth to the environment. 2.2 8th Maintenance Squadron Maintenance Facilities: These facilities require up to date maintenance in order to comply with applicable environmental, fire protection, and occupational health requirements. Additionally, these equipment items are tasked in direct support of aircraft and support equipment operations at Kunsan Air Base. Losing this equipment would be detrimental to the base mission capabilities.