Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Lead-Based Paint Abatement and Hazardous Material Removal

Active

Federal

Response Deadline08/07/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the complete removal, containment, and disposal of lead-based paint from steel bridge components, requiring strict adherence to environmental and safety regulations. This includes the establishment of full containment systems, use of HEPA filtration to control airborne particles, and proper handling and disposal of hazardous waste in compliance with all applicable federal and state guidelines. The work is focused on structural elements of a bridge located in Council Grove and must be executed with precision to prevent contamination and ensure worker and public safety. This is a subcontract opportunity posted by the Department of Defense under the agency name W076 Endist Tulsa, with a North American Industry Classification System code of 238990. The solicitation was made public on July 23, 2026, and responses are due by August 7, 2026, at 8:00 PM. The project demands specialized expertise in hazardous material abatement, rigorous documentation, and full compliance with regulatory standards for lead paint remediation, making it a high-stakes undertaking requiring certified personnel and approved methodologies.

General Info

Remove and dispose of lead paint from steel bridge in Council Grove with full containment and regulatory compliance.

Agency

Department Of Defense → W076 Endist TulsaView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Council Grove, KS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 08:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W076 Endist Tulsa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W076 Endist Tulsa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete removal, containment, and disposal of lead-based paint from steel bridge components, including containment setup, HEPA filtration, and hazardous waste handling in compliance with environmental and safety regulations.

Similar Contracts

Same NAICS industry code

City of Williams – Wastewater Collection System Improvement Project (Job No. 2290.16)

Solicitation # 2290.16

The City of Williams is seeking qualified contractors for the Wastewater Collection System Improvement Project, identified as Job No. 2290.16, with an estimated contract value of $4.1 million. The scope of work includes replacing up to 10,500 linear feet of 8-inch to 24-inch collection pipeline, replacing laterals and installing new two-way cleanouts within the right-of-way, replacing manholes, and lining approximately 320 linear feet of a 15-inch collection pipeline. The project requires the supply of materials such as aggregate and asphalt, precast concrete manholes, ready-mix concrete, waterworks pipe and fittings, and the provision of services including sawcutting, shoring rental, SWPPP services, striping, traffic control, and trucking. All subcontractors must comply with applicable state, county, and federal regulations as detailed in the project specifications. The solicitation is restricted to small businesses and emphasizes participation by certified DBE and SBE firms, encouraging second-tier subcontracting and procurement from certified small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. Bid submissions are due by August 8, 2026, at 2:00 PM, with plans and specifications available through an online portal or by email to Ranger Pipelines, Inc., the contracting entity. Bonding, insurance, and line of credit requirements will be provided directly by Ranger Pipelines, Inc., and the place of performance is located in California. The solicitation is issued as a Request for Quotes with no specified contract type or line-item pricing, leaving pricing and detailed terms to be determined by respondent proposals.

Ranger Pipelines Incorporated

POSTED

about 8 hours ago

DEADLINE

Crack Sealing Application ServicesThe contract entails performing crack sealing services on Interstate 10 within El Paso County, requiring thorough cleaning of pavement cracks followed by the application of hot-applied rubberized sealant in full compliance with Texas Department of Transportation specifications. The work is intended to preserve pavement integrity and extend road life by preventing water infiltration and further deterioration through precise, specification-driven sealant application techniques. All activities must adhere to TxDOT standards for material quality, application methods, and operational safety protocols. This is a subcontract opportunity under NAICS code 238990, with a response deadline of September 2, 2026, and was posted on August 5, 2026. The contracting authority is the Texas Department of Transportation, and performance is limited to IH-10 in El Paso County. Interested parties must submit proposals through the Texas SmartBuy portal by the specified deadline, and the work is structured as a subcontract rather than a direct award, indicating it is part of a larger project managed by a prime contractor. There is no set-aside provision specified, meaning all eligible subcontractors may compete regardless of size or business classification.

Texas Department of Transportation

POSTED

about 8 hours ago

DEADLINE

Sign Installation and Structural Steel WorkThe contract encompasses the on-site removal of existing signage and the installation of new signs mounted on breakaway posts, gantries, or cantilever arms, with full responsibility for bolting, precise alignment, and proper grounding to ensure compliance with safety and structural standards. All work must be performed in accordance with industry best practices and transportation safety regulations, requiring skilled labor and specialized equipment to handle elevated installations and demolition tasks safely and efficiently. The contract is classified as a subcontract under NAICS code 238990 and is issued by the Texas Department of Transportation, with responses due by September 3, 2026. The place of performance is within Texas, though specific locations are not detailed, indicating the work may span multiple sites across the state. Bidders must be prepared to mobilize onsite, manage logistics for sign removal and installation in active roadway environments, and adhere to all state and federal requirements for public infrastructure projects. The solicitation is accessible via the Texas SmartBuy portal for qualified subcontractors.

Texas Department of Transportation

POSTED

about 8 hours ago

DEADLINE

Exterior Door Installation and Labor ServicesComplete installation of exterior doors is required, encompassing the removal of existing doors, proper framing adjustments, weatherproofing to ensure resistance to environmental elements, installation of all necessary hardware, and a final inspection to confirm compliance with contract specifications. The work must adhere strictly to all documented requirements and standards outlined in the contract documents, ensuring durability, functionality, and safety. This subcontract under NAICS code 238990 is issued by BOE Maintenance in Connecticut with a response deadline of September 1, 2026, and is open for bidding through the specified procurement portal.

BOE Maintenance

POSTED

about 8 hours ago

DEADLINE

Non-Electric Traffic Control Signage DeploymentThe City of San Antonio is seeking a subcontractor to install, maintain, and manage non-electric traffic control infrastructure including signage, rumble strips, and temporary control devices. This procurement falls under NAICS code 238990, covering other specialized construction activities, and is intended for work to be performed within the city’s jurisdiction. The contract opportunity was posted on August 5, 2026, with a firm response deadline of September 4, 2026, at 8:00 PM. All performance will take place in San Antonio, Texas, focusing on enhancing road safety through physical traffic control measures that do not require electrical power. The project requires expertise in durable material installation, adherence to traffic control standards, and ongoing maintenance to ensure visibility and functionality under varying environmental conditions. Subcontractors must be prepared to coordinate with local authorities and comply with all applicable safety and regulatory requirements during deployment and maintenance activities.

CITY OF SAN ANTONIO

POSTED

about 8 hours ago

DEADLINE

Raised Pavement Marker (RPM) InstallationThe contract is for the supply and installation of raised pavement markers including Botts' dots and reflective domes to clearly delineate lanes on roadways within the City of San Antonio. It is classified as a subcontract under NAICS code 238990 and is open for bids with a response deadline of September 4, 2026. The work will be performed locally in Texas, with no specific city or zip code designated for performance. The posting date shows the opportunity became publicly available on August 5, 2026, and interested parties must submit proposals before the deadline to be considered. The contract is administered through the Texas SmartBuy platform, and all details and submissions are handled via the provided online portal. There is no set-aside designation, meaning all eligible contractors may compete regardless of business size or ownership characteristics.

CITY OF SAN ANTONIO

POSTED

about 8 hours ago

DEADLINE

Pavement Marking Installation and MaintenanceThe contract titled Pavement Marking Installation and Maintenance involves the removal and installation of reflective pavement markings on city roadways within San Antonio, including stripes, legends, and crosswalks. The work is being procured as a subcontract under the NAICS code 238990, with a response deadline of September 4, 2026, and was posted on August 5, 2026. All tasks must align with local standards for visibility, durability, and safety, ensuring that markings meet or exceed regulatory requirements for nighttime and weather-condition readability. The project is administered by the City of San Antonio, Texas, and performance is expected to occur across various city roadways, though specific locations are not detailed. The subcontractor is responsible for all materials, labor, equipment, and compliance with traffic control protocols during execution. No set-aside provisions have been designated, and the contract does not specify a point of contact, with the official solicitation details accessible through the provided Texas SmartBuy portal link.

CITY OF SAN ANTONIO

POSTED

about 8 hours ago

DEADLINE

T32-D7-Fencing-I20 EB/WB-Rockdale-190813

Solicitation # 48400-eRFQ-001899-2027

The Georgia Department of Transportation is soliciting bids for the installation, repair, and maintenance of fencing associated with state highway infrastructure, limited to contractors previously qualified through the department’s prequalification process for this specific service. Eligibility is restricted to those who have successfully completed the required prequalification as mandated under Georgia law, ensuring only experienced and vetted contractors may respond. The solicitation is governed by the terms of MMSA 48400-410-000033618 and the official ITB/RFQ form, and all respondents must fully adhere to the instructions provided, as failure to comply may result in bid rejection. The Department retains full discretion to modify contract terms, add new provisions, or waive minor irregularities at any point during the procurement process. The solicitation, identified as T32-D7-Fencing-I20 EB/WB-Rockdale-190813 under reference number 48400-eRFQ-001899-2027, was posted on August 5, 2026, with a response deadline of September 1, 2026. Work will be performed in Rockdale County, Georgia, and all contractual obligations must be fulfilled in accordance with state statutes authorizing ancillary services for public road construction and maintenance. Primary point of contact for inquiries is Timothy Swink, reachable by phone or email, and all submissions must be made through the official Georgia procurement portal. Bidders are strongly advised to review the complete solicitation materials prior to submission, as the State Entity reserves the right to reject any or all bids without explanation.

Department of Transportation

POSTED

about 10 hours ago

DEADLINE

Repoint Mortar at Fort Sumter

Solicitation # DOIDFBO260078

The National Park Service’s Historic Preservation Training Center is seeking a qualified small business contractor to perform repointing work at Fort Sumter by designing, erecting, assembling, and installing scaffolding on the exterior right face wall, which measures 100 feet in length and 25 feet in height. The project requires full provision of labor, materials, and equipment necessary to safely support the repointing operation, with all work performed in accordance with historic preservation standards. The solicitation, issued under DOIDFBO260078, is a Small Business Set Aside, ensuring eligibility is restricted to businesses certified as small by the SBA, and is categorized under NAICS code 238990 for other construction specialties. The opportunity was posted on August 5, 2026, with responses due by August 19, 2026, at 9:00 PM Eastern Time. The contracting office is based in Herndon, Virginia, under the Department of the Interior’s IBC Acquisition Services Directorate, and inquiries should be directed to Angelina Clements, the primary point of contact, via phone or email provided in the solicitation.

Ibc Acq Svcs Directorate (00004)

POSTED

about 12 hours ago

DEADLINE

Chain-link Fence Purchase and Installation

Solicitation # 69727626Q000003

The contract is for the purchase and installation of a chain-link fence at the Division of Gulf Operations, specifically covering the Warehouse Loading Dock and Parking Area at Poland Street Wharf, Berth 3, Door 38, New Orleans, Louisiana, 70146. This procurement is issued under solicitation number 69727626Q000003 and is classified as a combined solicitation with a Small Business Set Aside—Total designation, meaning only small business concerns are eligible to compete. The North American Industry Classification System code is 238990, which corresponds to other specialty trade contractors. The awarding agency is the Department of Transportation’s Maritime Administration, with the office located in New Orleans, Louisiana, 70130, and the work must be performed at the specified site in New Orleans, 70146. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 21, 2026, at 3:00 PM Eastern Time. Primary point of contact for inquiries is Carolyn Quinn, reachable via email at carolyn.quinn@dot.gov. All proposals must be submitted through the official SAM.gov portal linked in the solicitation.

697276 DOT Maritime Administration

POSTED

about 12 hours ago

DEADLINE

Y--Sources Sought Notice for Scaffolding for Chalmette Monument

Solicitation # DOIDFBO260079

The Department of the Interior through the Ibc Acq Svcs Directorate is seeking information from small business concerns capable of providing scaffolding services for the Chalmette Monument in Louisiana. This sources sought notice, identified by solicitation number DOIDFBO260079, was posted on August 5, 2026, with responses due by August 14, 2026 at 9:00 PM Eastern Time. The action falls under NAICS code 238990, which covers other specialty trade contractors, and is intended to assess the availability of small businesses qualified to perform the required work. The solicitation does not specify a set-aside type, indicating the government is gathering market intelligence prior to determining procurement strategy. The point of contact for inquiries is Sarah Ignacio, reachable via email at sarah_ignacio@ibc.doi.gov, with the office located in Herndon, Virginia. Performance of the work is expected to take place at the Chalmette Monument site, though specific location details are not provided in the notice.

Ibc Acq Svcs Directorate (00004)

POSTED

about 12 hours ago

DEADLINE

Emergency and On-Call Maintenance SupportThe contract titled Emergency and On-Call Maintenance Support requires prompt response to urgent plumbing leaks, electrical failures, and safety hazards, with a 24-hour response window for standard issues and a stricter 2-hour threshold for safety-critical situations. Contractors are expected to either perform minor repairs directly or arrange for specialized trade professionals to address more complex problems, ensuring continuous operational safety and functionality. All work must align with the needs of the Department of Transportation in North Carolina, with performance obligations rooted in maintaining critical infrastructure without delay. This subcontract, identified under NAICS code 238990, was posted on August 5, 2026, and requires proposals to be submitted no later than August 26, 2026, at 7:00 PM. The scope is focused on emergency maintenance support without specific geographic details provided beyond the state level, and while no set-aside provisions are designated, the opportunity is open to qualified subcontractors ready to meet rigorous response timelines and reliability standards for public infrastructure systems.

Department of Transportation

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → W076 Endist Tulsa

Same awarding agency

Midwest City Water Tower

Solicitation # W912BV26RA027

The U.S. Army Corps of Engineers Tulsa District is soliciting bids for the construction of a 500,000-gallon elevated storage tank and a high-service pump station in Midwest City, Oklahoma, under solicitation W912BV26RA027. The project, classified under NAICS code 237110, involves building new water infrastructure to enhance pressure in the southeastern distribution system, including approximately 650 linear feet of 12-inch ductile iron pipe, reconfiguration of existing 18-inch and 16-inch piping at the Titan Tower Tank site, and modifications at 15th Street and Westminster Road. All work must comply with erosion and sediment control standards, stormwater permitting requirements, and applicable federal, state, and local codes. The estimated contract value ranges from $10 million to $25 million, with a projected performance period of 450 calendar days. The solicitation is restricted to firm-fixed price contracts awarded using the Lowest Price Technically Acceptable approach, with no tradeoffs permitted between cost and technical merit. A pre-bid site visit was conducted on July 22, 2026, and the attendee list is available in the attachments. Proposals are due by August 6, 2026, and the procurement is unrestricted, open to all business sizes with no socioeconomic set-asides. The place of performance is exclusively in Midwest City, Oklahoma, and all deliveries and construction activities must occur on-site. Contract administration is managed by the Tulsa District with primary point of contact Tyler Godwin, and additional points of contact include Justin Hodd, Robert Clancy, and Midwest City representatives Corrie Evenson, Koren Steele, Matt Thomas, and Dan Cole. Payment will be processed through the U.S. Army Corps of Engineers Tulsa District using agency code W912BV, and invoicing is expected to follow standard DOD Wide Area Workflow procedures. No specific packaging, marking, inspection criteria, or special contract requirements like security clearances or key personnel qualifications are detailed in the pre-solicitation materials, and Section K representations and certifications will be provided in the formal solicitation document.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Helping Agencies Phase 3, Tinker AFB, OK

Solicitation # W912BV26RA031

The U.S. Army Corps of Engineers, Tulsa District, intends to award a sole-source contract to Cape Fox Expeditionary for Phase 3 work at Building 1 on Tinker Air Force Base in Oklahoma, under the Revolutionary FAR Overhaul authority. This contract will require comprehensive design and engineering services, along with all materials, labor, equipment, and quality control necessary to install humidity control systems and repair interior administrative spaces. The work builds directly on existing Phase 1 and Phase 2 contracts already being performed by Cape Fox, justifying the sole-source approach. The contract will be issued on a Firm Fixed Price basis, with the North American Industry Classification System code 236220 and an 8(a) Sole Source set-aside designation under the small business size standard of $45 million. Interested parties must submit documentation demonstrating their technical capability to meet the requirements by 3:00 p.m. CT on August 7, 2026, to the identified Contract Specialist. This notice serves only as an informational solicitation and is not a request for competitive proposals; responses will be evaluated solely to determine whether a competitive procurement is warranted. The government retains full discretion to proceed without competition based on the submissions received. The contract, identified by solicitation number W912BV26RA031, will be administered by the Tulsa District of the Corps of Engineers, with primary point of contact Cheyenne Redemann, and performance location in Midwest City, Oklahoma.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Small Business Subcontracting and Compliance SupportThe contract requires comprehensive administrative support to ensure compliance with FAR 52.219-14 regarding small business subcontracting obligations. This includes meticulous tracking of all subcontracts, preparation of accurate and timely reports, and maintaining complete documentation to demonstrate adherence to federal small business subcontracting goals. The contractor must establish and manage systems that monitor subcontractor classifications, utilization rates, and reporting metrics to align with Department of Defense requirements. All activities must be conducted with precision to avoid compliance risks and support audit readiness. The work is associated with the NAICS code 541611 and is tied to the Department of Defense agency W076 Endist Tulsa, with performance taking place in Council Grove. The solicitation was posted on July 23, 2026, and responses are due by August 7, 2026. This subcontract opportunity necessitates a contractor with proven experience in federal subcontracting compliance, strong documentation practices, and the ability to interface with government reporting systems. While no set-aside type is specified, the focus remains squarely on enabling prime contractors to meet their mandated small business participation targets through structured, transparent, and auditable processes.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Lead-Contaminated Waste Transportation and DisposalThe contract pertains to the transport and disposal of lead-contaminated debris and hazardous waste to facilities permitted under the Resource Conservation and Recovery Act, ensuring full compliance with federal hazardous materials regulations. All activities must include proper packaging, labeling, and manifesting in accordance with applicable environmental and safety standards to guarantee safe handling and documentation throughout the transportation and disposal process. The work is tied to a specific performance location in Council Grove, requiring logistics and operational planning aligned with regional environmental and regulatory requirements. This is a subcontract issued by the Department of Defense under the agency name W076 Endist Tulsa, with a North American Industry Classification System code of 484220, indicating a focus on specialized trucking services. The solicitation was posted on July 23, 2026, and responses are due by August 7, 2026, at 8:00 p.m. The contract does not specify a set-aside classification or detailed point of contact, and all activities must be executed in strict adherence to RCRA protocols to mitigate environmental and public health risks associated with lead contamination.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Environmental and Safety Compliance ManagementThe contract involves providing on-site environmental and safety compliance management for abatement and painting operations under the supervision of the U.S. Army Corps of Engineers EM 385-1-1 standards. Key responsibilities include continuous oversight of air monitoring, worker safety protocols, and adherence to environmental regulations to ensure full compliance during all phases of the work. The services are required at a location in Council Grove, with performance expected to meet federal defense project requirements. The contract is categorized as a subcontract under NAICS code 541620, which corresponds to environmental consulting services, and it was posted on July 23, 2026, with proposals due by August 7, 2026. The contracting entity is the Department of Defense through the W076 Endist Tulsa office, indicating this work is part of a larger military or federal infrastructure project requiring strict regulatory alignment. No set-aside provisions are specified, and the submission must demonstrate proven expertise in managing industrial abatement operations with a focus on health, safety, and environmental protection.

Environmental Consulting Services

POSTED

DEADLINE

Steel Bridge Girders and Appurtenances RepaintingThe contract involves surface preparation, abrasive blasting, and the application of protective coating systems on steel bridge girders and associated components to comply with U.S. Army Corps of Engineers corrosion protection standards. Work must be performed to ensure long-term durability and structural integrity of the bridge elements in accordance with federal specifications for marine and atmospheric exposure environments. All activities, including surface cleaning, coating application, and quality control measures, are expected to meet stringent performance and safety benchmarks established by the Department of Defense. The solicitation is classified as a subcontract under NAICS code 238210, indicating it falls within the structural steel contracting sector. The response deadline is August 7, 2026, with the opportunity posted on July 23, 2026. Performance is required at Council Grove, with no specific state or zip code provided. The contracting activity is managed by W076 Endist Tulsa under the Department of Defense, and while no point of contact is listed, interested parties can access further details through the provided SAM.gov link. The contract does not indicate a specific set-aside classification, making it open to general contractor participation.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Structural Steel FabricationThe contract pertains to the off-site fabrication of structural steel members in accordance with approved shop drawings, encompassing all necessary manufacturing processes such as cutting, welding, drilling, and galvanizing. This subcontract is issued under NAICS code 332312, indicating a focus on structural metal fabrication, and is managed by the Department of Defense through its W076 Endist Tulsa office. The work must be completed off-site, with all fabrication activities performed in a controlled environment prior to delivery and installation at the designated project location. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026, at 7:00 PM. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of business size or ownership characteristics. The place of performance is not detailed, suggesting the fabrication facility can be located anywhere, as long as the final products meet the required specifications and are delivered as agreed. Interested parties must submit their proposals before the deadline to be considered for award.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 19 hours

Ready-Mix Concrete SupplyThe contract requires the supply of high-strength, air-entrained, sulfate-resistant concrete specifically designed for use in foundation and secondary containment structures, ensuring durability under harsh environmental and chemical conditions. The concrete must meet stringent performance specifications to withstand prolonged exposure to sulfates and freeze-thaw cycles, making it suitable for critical defense infrastructure applications. All materials and mixing processes must comply with industry standards for structural integrity and long-term resilience. The contract is classified as a subcontract under NAICS code 327320, issued by the Department of Defense through the W076 Endist Tulsa office, with a response deadline of August 6, 2026. The performance location is not specified in the data provided, but the work is expected to support federal defense projects requiring reliable, chemically resistant concrete systems. Interested parties must submit proposals by the deadline to be considered for award, with no set-aside provisions indicated for small businesses or other categories.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

in about 19 hours

Piping, Valves, and Appurtenances InstallationThe contract titled Piping, Valves, and Appurtenances Installation involves the installation of inlet and outlet piping, control valves, level indicators, and access ladders with handrails, all must comply with hydraulic and safety specifications to ensure operational integrity and personnel protection. The work is scoped to meet rigorous technical standards and is intended for a defense-related infrastructure project under the Department of Defense, administered by W076 Endist Tulsa. The solicitation is classified as a subcontract and is open for responses until August 6, 2026, with a NAICS code of 238220 indicating specialized plumbing and pipefitting services. No set-aside provisions are specified, and the performance location details are not provided, though the work is likely tied to a DoD facility requiring precise execution under regulated conditions. All components must be procured and installed to meet functional, durability, and safety benchmarks without exception.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 19 hours

Electrical and Cathodic Protection System InstallationThe contract outlines the installation of cathodic protection systems designed to prevent underground corrosion of foundation steel and associated appurtenances, with integral monitoring stations to ensure long-term system effectiveness. This work is critical for preserving structural integrity in corrosive soil environments and includes all necessary materials, equipment, and labor for full system deployment and integration. The project falls under NAICS code 238210, classifying it as electrical and structural steel installation work, and is structured as a subcontract within the broader scope of Department of Defense infrastructure projects managed by W076 Endist Tulsa. All proposals must be submitted by August 6, 2026, at 7:00 PM, with the solicitation posted on July 23, 2026. The work is expected to occur at an unspecified location, tied to Defense Department assets requiring corrosion mitigation. While the exact site details and point of contact are not provided, the contract emphasizes technical compliance with standards for cathodic protection in subsurface applications, and successful bidders must demonstrate capability in both installation and ongoing monitoring infrastructure. No set-aside preferences are designated, making the opportunity open to all qualified subcontractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 19 hours

Tank Coating and Interior LiningThe contract involves the surface preparation and application of protective coatings to both the interior and exterior surfaces of a steel water tank, with the primary goal of preventing corrosion and ensuring the safety of potable water. All work must meet strict standards to safeguard water quality and maintain the structural integrity of the tank over its service life. The scope includes thorough cleaning, abrasive blasting, and the application of approved lining and coating systems compatible with drinking water regulations. This is a subcontract under the Department of Defense, issued by W076 Endist Tulsa, classified under NAICS code 238290 for other structural metal manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of August 6, 2026, at 7:00 PM. The place of performance and specific location details are not provided, but the work is expected to occur at a Department of Defense facility. Interested parties must submit proposals prior to the deadline to be considered for award.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 19 hours

Concrete Foundation and Anchor BoltingThe contract involves the excavation, rebar placement, formwork installation, and pouring of mass concrete to create a foundational structure capable of supporting a water tower, with particular emphasis on the accurate incorporation of embedded anchor bolts to ensure structural integrity and secure attachment of the tower. All work must comply with engineering specifications for load-bearing capacity, dimensional precision, and durability under environmental stress. The scope requires specialized knowledge in heavy civil concrete works and meticulous attention to detail during the placement of anchor bolts, as any misalignment or error could compromise the entire water tower assembly. This is a subcontract opportunity under NAICS code 238110, issued by the Department of Defense through the W076 Endist Tulsa office, with a response deadline of August 6, 2026 at 7:00 PM. The contract is not subject to any set-aside provisions and the place of performance is unspecified, indicating potential flexibility in location or requirement for bidder clarification. Interested parties must submit proposals by the deadline, and all technical execution must meet military standards for infrastructure reliability and safety, as the foundation will support critical water storage infrastructure under DoD jurisdiction.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 19 hours