Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LEAD, ELECTRICAL

Active
SPE4A6-26-T-09NSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 14 units of LEAD, ELECTRICAL with NSN 5995-01-040-8768 under solicitation SPE4A6-26-T-09NS, with a response deadline of August 3, 2026, and a delivery requirement within 140 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions determined by the solicitation or award date depending on acquisition size. Compliance with Cybersecurity Maturity Model Certification Level 2 by a certified third-party assessment organization is mandatory. Physical identification and bare item marking are required, and the item is subject to Defense Logistics Agency packaging standards and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, including foreign nationals within the U.S., and DFARS 252.225-7048 applies. Distribution is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of DOD export control training, and formal DLA approval. Covered Defense Information requirements are active, and all activities fall under the Department of Defense through the ASC Commodities Division.

General Info

Procure 14 LEAD ELECTRICAL units per NSN 5995-01-040-8768, deliver within 140 days, CMMC L2 compliant, ITAR/EAR controlled, DLA standards apply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09NS.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ernest Penrose
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEAD,ELECTRICAL
LEAD, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5995-01-040-8768 Quantity: 14 EA Purchase Request: 7017574349QTY: 14 Delivery: 140 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
FILTER ASSEMBLY, ELECTRThe contract pertains to the procurement of 18 units of a FILTER ASSEMBLY, ELECTRICAL with NSN 5915-01-533-8556, under solicitation SPE7M5-26-U-0055, with a response deadline of August 10, 2026, and a delivery requirement of 125 days after contract award. The technical and quality standards governing this procurement are fully incorporated from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation or award date depending on the procurement size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. While MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero non-conformances unless otherwise contracted. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless directed otherwise. Government identification must be removed from non-accepted supplies, and the contract applies to covered defense information. The acquisition is managed by the Department of Defense’s Active Devices Division, with Jacob Hamilton as the primary point of contact, and the NAICS code is 334419 for other electronic component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVEThe contract pertains to the procurement of a sensitive switch with NSN 5930-00-666-1927 and part numbers 316 and 3HF5, supplied by Raytheon Company and Saint Technologies Inc, respectively. A total quantity of 11 units is required, to be delivered FOB origin within 132 days from the required delivery date of June 22, 2025, with no variance permitted in quantity. The item is classified as a critical application component and must comply strictly with DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, as well as military specifications including MIL-STD-2073-1E for packaging and MIL-DTL-28786 for preservation, with marking adhering to MIL-STD-129 and no special marking codes applied. Mercury or mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lights, sensors, weapon systems, and specified reagents, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and shipping of hazardous materials must follow IP025 guidelines, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, and the unit of issue is each (EA), with pricing set at $11.00 per unit for a total contract value of $121.00. All requirements are governed by the DLA acquisition framework under solicitation SPE7M8-26-T-5611, with primary point of contact Dawn MacLean and electronic access to procurement details via the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SPACER, BALLThe contract is for the procurement of 186 units of a spacer, ball item with NSN 1440-00-961-5057 and part number 29-13703-3, sourced under solicitation SPE4A6-26-T-09RU. Delivery is required FOB origin within 117 days from the contract award, with a mandatory ship date of November 29, 2026, and an original delivery deadline of December 4, 2027. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements referenced by R-numbers, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and no government identification may be removed from non-accepted supplies. Unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at destination. Quality assurance is governed by tailored and non-tailored higher-level requirements, including ISO 9001:2015 for both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment must meet RT001 specifications. The item does not require Unique Identification per DFARS 252.211-7003(c)(1)(i). All packaging must be marked and labeled per MIL-STD-129 and delivered to the designated receiving facility in Tracy, CA, with transportation logistics governed by DLAD procedural notes C19 and C20. The solicitation was issued July 26, 2026, with responses due by August 3, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract pertains to the procurement of a cable assembly identified by NSN 6150-01-555-8887, with a quantity of eight units, under solicitation SPE4A6-26-T-09RT, designated as a Women-Owned Small Business Set-Aside. The item is source-controlled and must be manufactured and tested using limited rights data that only approved vendors with verified access or traceability to the approved source can obtain; unauthorized quotation is prohibited. Technical data associated with this item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, and access is restricted solely to contractors holding US/Canada Joint Certification Program approval, having completed mandatory DOD export control training, and being formally authorized by DLA. All work must adhere to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including quality standards such as SAE AS9100 for both manufacturers and non-manufacturers, and specific inspection protocols as defined by MIL-STD-1916 or equivalent zero-based sampling plans, with critical attributes requiring a verification level of VII or AQL 0.1. Packaging must meet DLA requirements, and non-accepted items must have government identification removed prior to return. A Quality Assurance Letter of Instruction will be issued by DCMA and is mandatory without waiver. The supplier must submit a Source Approval Request if proposing new manufacturing sources, and the delivery deadline is 158 days after award, with performance located in Tracy, California.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
ADAPTER, FUEL TANKThe contract pertains to the procurement of four ADAPTER,FUEL TANK units with NSN 4925-00-351-2693, under solicitation SPE4A7-26-T-594S, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The delivery is required within 20 days after award, and bids must be submitted by August 3, 2026. This item is classified with export-controlled technical data governed by either ITAR or EAR, meaning any disclosure, transfer, or access by foreign persons—including foreign nationals within the United States—is strictly regulated and requires prior authorization from the U.S. Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with an approved US/Canada Joint Certification Program certification, who have completed the required DLA training and questionnaire, may access this technical data. The place of performance is Keyport, WA, with Christian Roberson designated as the primary point of contact for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract pertains to the procurement of a LIGHT, INDICATOR with NSN 6210-01-334-2919 and part number 11460090-1, governed by stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. All items must comply with MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Production lot testing is mandatory for all lots, and test items are not to be destroyed during evaluation. The item is classified as a Critical Application Item, requiring adherence to TDP Rev A Gen 1 per reference drawing 18876 11460090-1 dated 09/01/2023, and must meet cybersecurity requirements under CMMC Level 2 via self-assessment. Packaging must conform to ASTM D3951 and be marked per MIL-STD-129, with palletization following DLA Packaging Requirements. The contract specifies a zero variance in quantity, with inspection and acceptance occurring at origin. The order consists of two line items: the primary item for 105 units at $105.00 each, and a secondary line item representing the mandatory production lot test requirement. Delivery is required FOB origin within 231 days, with an original delivery date of March 26, 2027. All packaging and labeling must reflect the specified U/I and QUP as defined in the contract, with no exceptions permitted. The supplier must provide a Certificate of Conformance unless explicitly prohibited by a Quality Assurance Letter of Instruction. The contract is a total small business set-aside under NAICS 334419, issued by the Department of Defense through the DDSP New Cumberland Facility. Shipping instructions and transportation protocols are governed by DLAD Proc Notes C19 and C20, with the delivery destination clearly identified as New Cumberland, PA. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and point of contact is Kelly Mitchell.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
TABLE, TILTING, GYROThe contract pertains to the procurement of two tilting gyro tables, identified by NSN 4920-01-718-1334 and part number 930-100-001, under solicitation SPE4A5-26-T-308L. Delivery is required within 20 days of contract award, with goods to be shipped FOB origin and inspected and accepted at the destination. Strict compliance with DLA’s Master List of Technical and Quality Requirements governs all specifications, superseding other standards like ASTM D3951 when conflicting. Packaging must adhere to MIL-STD-129 and RP001 packaging guidelines, with all items marked in accordance with physical identification requirements and government identification removed from non-accepted supplies. Sampling and inspection follow zero-defect acceptance rules under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Cybersecurity compliance at CMMC Level 2 is required, and the contractor must complete a self-assessment. Shipping must be via traceable freight—not parcel post—to the designated Tinker AFB location, with a strict quantity variance of plus or minus zero percent. The contract mandates use of the DoD unit of issue and references official DLA resources for unit conversion. Contract data includes the primary point of contact, Hien-Van Trinh, and specifies the original required delivery date of July 20, 2026, with a posted date of July 26, 2026, indicating a forward-looking procurement timeline.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SHAFT ASSY FLEXThe contract pertains to the procurement of a Shaft Assembly Flex with part number 491F1200303-001 and NSN 4920015344506, quantity of seven units, to be delivered FOB origin within 167 days of the contract award, with a required delivery date of August 8, 2027. The item is classified as a Commercial Off the Shelf (COTS) product and is subject to Item Unique Identification (IUID) compliance per MIL-STD-130 and DFARS 252.211-7003. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with palletization conforming to specified guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively. Documentation for source approval and covered defense information applies. Delivery is to be made to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with inspection and acceptance occurring at the destination. The unit of issue is each, with no variance allowed in quantity, and the contract is issued under solicitation SPE4A5-26-T-308S with a response deadline of August 3, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWEThe contract pertains to the procurement of five cable assemblies, power, electrical, identified by NSN 6150014951817 and part number G661920-15, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery is required within 349 days of the contract award, with a required ship date of July 19, 2027, and an original delivery deadline of October 14, 2026. Items must be delivered FOB origin with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, supplemented by strict adherence to MIL-STD-129 for labeling and packaging, with palletization governed by DLA’s packaging requirements. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. The supplier must perform a Cybersecurity Maturity Model Certification Level 2 self-assessment, and all non-conforming supplies must be de-identified per government regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. The contract is issued under solicitation SPE4A6-26-T-09SK, with the unit of issue as a single unit, and the total price for the five units is based on the contracted unit price. The responsible point of contact is Shalon Bond, and the item is classified under NAICS code 334419.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SUPPORT, BORESCOPE TThe contract specifies the procurement of one unit of a borescope support tube with NSN 4933-01-536-1238 and part number PXTM626060SG from WAYGATE TECHNOLOGIES USA LP, under solicitation SPE4A6-26-T-09SF. The item must be delivered within five days to the designated military address in Kingsville, Texas, with FOB origin terms and zero tolerance for quantity variance. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA’s RP001 packaging requirements, while technical and quality standards referenced by R and I numbers from the DLA Master List take precedence over any other specifications. Inspection and acceptance occur at the destination, and the contractor must adhere to zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. The item must be shipped via the fastest traceable freight method, with parcel post prohibited, and labeled according to DLA guidelines including the RDD 777 shipment code and government-specific identifiers. The required delivery date is May 8, 2026, with the contract issued by the Department of Defense’s ASC Commodities Division and primary point of contact Emma Garrett.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIThe contract is for a commercial off-the-shelf cable assembly identified by part number 1-3737-600-3204 and NSN 5995-01-549-9672, with a quantity of 70 units to be delivered in 117 days under solicitation SPE4A6-26-T-09RQ. The item is classified as a critical application product and does not require Unique Item Identification per Service customer request. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and labeling must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. Deliveries are FOB origin, inspected and accepted at destination, with no variance permitted in quantity. The unit price is $70 per each, totaling $4,900. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a required ship date of November 29, 2026, and original delivery deadline of June 19, 2027. Transportation details reference DLAD procedural notes C19 and C20, and the contract is managed by the ASC Commodities Division under the Department of Defense, with Sterling Mason as the point of contact.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STRIP, ELECTRICAL GRThe contract pertains to the procurement of four units of STRIP, ELECTRICAL GROUNDING with NSN 5999016750565 and part number 4096984, issued under solicitation SPE7L1-26-T-879B by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, with all units to be shipped FOB origin and inspected and accepted at the destination. The quantity is fixed with zero variance allowed, and the unit price is $4.00 per unit, resulting in a total contract value of $16.00. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and all items must be labeled and marked per MIL-STD-129. Non-hazardous materials must be commercially packaged in accordance with ASTM D3951 unless otherwise dictated by DLA requirements, while hazardous items must meet TQ requirement IP025 per FED-STD-313. Palletization must follow RP001 guidelines and the Unit of Issue and Quantity per Unit Pack are strictly defined. Shipment must occur by the fastest traceable method, excluding parcel post, to the designated delivery point at Picatinny Arsenal, New Jersey. The government requires the original delivery date be met by June 2, 2026, and all shipments must bear the RDD number 555 and the specified marking for W58ULM. The contract mandates full and open competition, and technical specifications are governed by the DLA Master List referenced in RA001, with compliance enforced at all stages of fulfillment.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIALThe contract pertains to a special purpose electrical cable assembly identified by part number SFV.L01.47 and NSN 5995-01-727-7502, with a quantity of ten units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced specifically by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging standards, with marking following MIL-STD-129 and no special marking codes applied. The item is classified as a critical application item, requiring strict quality controls. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted in the sample lot unless otherwise stipulated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is due within 150 days from the order date, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no quantity variance permitted. Transportation guidelines are referenced under DLAD Proc Notes C19 and C20, and the freight destination matches the parcel post address. The contract was issued under solicitation SPE4A6-26-T-09SX, with a response deadline in August 2026 and a required ship date of January 1, 2027, and original delivery date of April 29, 2027. Documentation for source approval, removal of government identification from rejected items, and compliance with all referenced standards is required, and the point of contact for inquiries is Angela Boyce of the Department of Defense’s ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVETThe item specified is a threaded pin-rivet with NSN 5320-00-869-1498, with a total quantity of 36,805 units required under solicitation SPE4A6-26-T-09QW, which is a total small business set-aside classified under NAICS code 332510. The contract is issued by the Department of Defense through the ASC Commodities Division, with performance delivery expected at Cherry Point, North Carolina, within 275 days after delivery order. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the primary point of contact is Summer Allen, reachable via email and phone provided. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. firms. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to handle such data. DFARS 252.225-7048 governs the handling and safeguarding of this information, and all contractors must comply with these requirements to be eligible for award or performance under this contract.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROLThis contract pertains to the procurement of 13 units of Hamilton Sundstrand Corporation part number 772028, identified by NSN 3040-01-478-2006, under solicitation SPE4A6-26-T-09RD. Delivery is required within 166 days of award, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. While Unit Unique Identification is not mandated, the item is classified as a Critical Application Item requiring high reliability. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and any covered defense information is subject to applicable controls. The unit of issue is each (EA), with no tolerance allowed for quantity variance. The delivery deadline is set for August 29, 2027, though an earlier ship date of January 17, 2027 is requested. All documentation and compliance obligations are governed by DLA’s official requirements and referenced standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details