Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

LEAD, ELECTRICAL

Awarded

SPE4A0-26-T-4325Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A0-26-T-4325 is a federal procurement issued by the Defense Logistics Agency Aviation Supply Chain ESOC Buys for one electrical lead, identified by NSN 5995-01-702-1197. The requirement is for a single unit with an estimated value of 2,335.95 dollars. Delivery is required within five days after the date of order to Fort Stewart, Georgia. The item is subject to a non-extendable shelf life of 12 months and is governed by strict export control regulations under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and specific DLA authorizations to access technical data. The contract mandates that inspection and acceptance occur at the origin. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation is open for responses until August 25, 2026, and all quotes must be submitted electronically via the DLA Internet Bid Board System. Compliance with various FAR and DFARS clauses is required, including those related to cyber incident reporting, safeguarding covered defense information, and sustainable products.

General Info

DoD solicitation for one electrical lead; 5-day delivery; ITAR/EAR export controls apply.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$1,950

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

AEROSPHERE ENGINEERING INC

Award Issued Date

08/26/2026, 12:00:00 AM UTC

Documents

2

Request for Quotations SPE4A0-26-T-4325

rfq

High

SPE4A0-26-V-0809 - Order for Supplies or Services

award

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedAug 17

Solicitation

AwardedAug 26

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

LATITIA ORANGE

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE4A026V0809 posted on DIBBS. Awardee: AEROSPHERE ENGINEERING INC (CAGE 19DN2) Total Contract Price: $1,950.00 Award Date: 08-26-2026 Solicitation: SPE4A0-26-T-4325 Line items: - LEAD, ELECTRICAL (NSN/Part 5995017021197, PR 7017338200)

Similar Contracts

Same NAICS industry code

Solicitation # SPRMM127QKA09

This solicitation, issued by DLA Mechanicsburg, is for the manufacture and procurement of a power supply for the AN/UYK-43 computer set, specifically part of the PP-8099/UYK-43(V) power supply. The requirement is for the design represented by Cage Codes 90536 and 52088. Because the government cannot provide the Stable Base Master Phototools, the contractor is responsible for acquiring or developing the necessary artwork for manufacture. The contract mandates compliance with several military standards, including MIL-STD-130 for identification, MIL-STD-1686 for electrostatic discharge control, and MIL-STD-2000 for soldering. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability defined as full compliance with solicitation instructions and no exceptions to the terms. The government will utilize the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. Key administrative requirements include the electronic submission of invoices and receiving reports via PIEE-WAWF and the use of the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. If the offeror is not the original equipment manufacturer, they must identify the OEM's CAGE code and part number, as refurbished materials are not acceptable. Additionally, the contract incorporates various FAR and DFARS clauses, including requirements for Cybersecurity Maturity Model Certification (CMMC) and the transportation of supplies by sea.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

61--POWER SUPPLY ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAHY

Solicitation N00104-26-Q-YAHY, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the teardown, evaluation, repair, and modification of two Power Supply Assemblies (NSN 6130-01-326-8686). The contract is DO certified for national defense under the Defense Priorities and Allocations System. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization from the OEM. Following the initial evaluation of the items, the contractor is required to submit a detailed cost proposal reflecting actual repair costs. The contractor must adhere to strict quality and technical standards, including MIL-STD-129 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is that all materials must be mercury-free to prevent contamination on submarines and surface ships. Inspection and acceptance will occur at the origin, and the contractor must maintain all inspection records for 365 days after final delivery. Payment will be processed electronically through Wide Area WorkFlow. The solicitation also mandates compliance with various federal regulations, including the Buy American Act, cybersecurity maturity model certification levels, and prohibitions on covered defense telecommunications equipment.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

POWER DISTRIBUTION-

Solicitation # SPRMM126QGF05

Solicitation SPRMM126QGF05, issued by DLA Mechanicsburg for NAVSUP Weapon System Support, is a small business small purchase for the manufacture and delivery of one Power Distribution unit. The requirement specifies the item must adhere to the design represented by Cage Code 38200 and reference number 148967-1, with the National Item Identification Number 200072349. Award will be determined using the Lowest Price Technically Acceptable (LPTA) criteria, where technical acceptability is based on compliance with solicitation instructions and the absence of exceptions to the terms. The government will also utilize the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. The contract requires delivery as soon as possible (ASAP) with FOB Origin terms. Inspection and acceptance will occur at the contractor's or subcontractor's plant. Strict quality and packaging standards are mandated, including physical identification per MIL-STD-130, preservation according to MIL-STD-2073-1, and adherence to ANSI/ESD S20.20-2021 for electrostatic discharge sensitive items. All invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPRMM126QGB20

This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture and provision of a power supply (NSN 7HH 6130-01-714-0090) based on the design represented by Cage Code 15055, reference number 8704449H01. The contract is a fixed-price requirement with delivery expected as soon as possible (ASAP), shipped FOB Destination to the DLA Distribution DDSD New Cumberland facility in Pennsylvania. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contractor is responsible for all inspection and acceptance at the origin and must maintain quality records for 365 days following final delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labels and ESD protection where applicable. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and refurbished materials or those produced via additive manufacturing are not acceptable.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0038327QDA06

Solicitation N0038327QDA06 is a small business set-aside request for quotation issued by Navsup Weapon Systems Support Philadelphia for the repair of power supplies. This firm fixed price requirement is governed by FAR part 13 and is designated as a DO rated order under the Defense Priorities and Allocations System. The government intends to make a single award based on a best-value determination, prioritizing past performance as the primary evaluation factor via SPRS color ratings, with price serving as a secondary factor. The contract mandates a Repair Turnaround Time of 120 days from asset acceptance, with an induction expiration date set for 365 days after the award. Contractors must comply with SAE AS9100 Quality Management Systems and adhere to strict packaging and marking standards, including MIL-STD-2073-1 and MIL-STD-129. Payment and receiving reports are to be processed electronically through the Wide Area Workflow system. Key administrative requirements include compliance with the Buy American Act, NIST SP 800-171 for cybersecurity, and specific hazardous material labeling per OSHA standards. Final inspection and acceptance will occur at the contractor's location.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPRMM126QKJ06

This solicitation, issued by DLA Mechanicsburg under Emergency Acquisition authority, seeks the manufacture and delivery of a Power Supply (NSN 6130-01-617-3285). The procurement is designated as a small business small purchase and will be evaluated based on the Lowest Price Technically Acceptable (LPTA) criteria. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification, as the items are intended for use on submarines or surface ships. Offerors who are not the Original Equipment Manufacturer must provide the OEM's CAGE code and part number, and authorized distributors must submit proof of authorization on company letterhead. The contract mandates electronic processing of all invoices and receiving reports through PIEE-WAWF. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for electrostatic discharge protection and shipping levels based on destination. Inspection and acceptance will occur at the origin. Following two amendments, the final deadline for the receipt of offers is October 30, 2026, at 4:30 PM local time. Additionally, the contract incorporates cybersecurity requirements, including CMMC Level 1 self-certification and DFARS 252.204-7012 for safeguarding covered defense information.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010427QTA12

This solicitation, issued by the Navsup Weapon Systems Support Mech, is a request for quotations for the teardown, evaluation, repair, and potential modification of the PWA PROFIBUS (NSN 5935-01-662-2789). The government is seeking a single award from an authorized distributor or the original manufacturer, with an evaluation process that prioritizes past performance over price. The contract includes a primary requirement for one unit and an option quantity for up to 100 percent of the initial item. Key requirements include a specific Repair Turnaround Time (RTAT) of 229 days, though accelerated delivery is encouraged. The government also requires a quote for testing and evaluation fees in the event the asset is determined to be beyond economical repair. The contract mandates strict quality and safety standards, including Government Source Inspection (GSI) and compliance with MIL-STD-129 for marking and MIL-STD-2073-1 for packaging. A critical requirement is the prohibition of metallic mercury and mercury contamination, as the material is intended for use on submarines or surface ships. All freight is handled as FOB Origin, and payment will be processed via the Wide Area Workflow (WAWF) system. Additionally, the awardee must comply with cybersecurity maturity model certification requirements and provide detailed documentation for any design or part number changes.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010427QNA14

Solicitation NO0014-27-Q-NA14, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the teardown, evaluation, repair, and modification of a power supply (NSN 6130-01-630-9299). The requirement is pursued under Emergency Acquisition Flexibilities and is designated as a DO-rated order for national defense. The resulting contract will be a bilateral Firm-Fixed Price agreement. Offerors must be authorized distributors of the original equipment manufacturer (OEM) and are required to provide a signed letter of authorization on OEM letterhead. Vendors must provide an estimated repair price and have 90 days after receiving the carcass to complete a teardown and evaluation and submit a final firm-fixed price quote. The scope of work includes all quality requirements for the repair process, with physical identification following MIL-STD-130 and packaging adhering to MIL-STD-2073. Delivery is required within 120 days, FOB Destination, to the DLA Distribution New Cumberland facility. Award will be based on a combination of past performance and price, with past performance weighted as more important. Technical acceptability requires full compliance with solicitation instructions and no exceptions to the terms. Administrative requirements include the use of Wide Area Workflow (WAWF) for invoicing and receiving reports, and compliance with cybersecurity maturity model certification level requirements.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Connector Covers (Part 654446-5)This subcontract involves the manufacture or procurement of 108 specialized electrical connector covers, specifically Part Piece Number 654446-5, to support prime contractors delivering to the Defense Logistics Agency Weapons Support Maritime Supply Chain. All units must be produced in strict compliance with NSN 5935014116300 and delivered under FOB Origin terms. Eligible providers must maintain an active CAGE code and current registration in SAM.gov. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingThis subcontract involves the manufacture and supply of 14 special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the assemblies according to NSN 6150-01-616-6125 specifications and ensuring all items are mercury-free. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335931. Strict quality and logistical standards must be met, with inspections performed per MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must be packaged and marked in accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly SupplierThis subcontract involves the manufacture and supply of 12 special purpose electrical cable assemblies for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor is required to produce assemblies that meet NSN 6150015954673 and strictly adhere to the DLA Master List of Technical and Quality Requirements. The project falls under NAICS code 335931 and will be performed in New Cumberland. Logistics are handled via FOB Origin terms for all packaging and shipping. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Pressure Switches (NSN 5930-01-060-7268)This subcontract involves the manufacture or procurement of 34 pressure switches under NSN 5930-01-060-7268 for the DLA Weapons Support Electrical Devices Division. The contractor must ensure all units adhere to the DLA Master List of Technical and Quality Requirements and follow MIL-STD-129 and RP001 standards for packaging and marking. Delivery of the completed units is required FOB Origin to Tracy, California. To be eligible, the provider must maintain ITAR and EAR compliance and complete a CMMC Level 2 self-assessment. The contract falls under NAICS code 335931 and is managed by the Department of Defense. Responses to the solicitation are due by October 29, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Valve Caps (NSN 4820-01-733-3664)This subcontract involves the procurement and delivery of valve caps for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider must be a manufacturer or qualified distributor capable of supplying hardware components that strictly adhere to the technical specifications of NSN 4820-01-733-3664. All deliverables must comply with FAR 52.211-5 and FAR 52.213-4 and be delivered to the designated destination in Cambridge Springs. The opportunity is categorized under NAICS code 332911 and was posted on October 18, 2026, with a response deadline of October 29, 2026. This requirement is managed under the Department of Defense for the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Safety Relief Valve (NSN 4820014070685)This subcontract involves the procurement of a Safety Relief Valve, identified by NSN 4820014070685, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The selected vendor is responsible for the manufacture or distribution of the original equipment manufacturer part, ensuring all items are packaged and palletized according to RP001 standards and marked in compliance with MIL-STD-129. Additionally, the contractor must adhere to the requirements set forth in Section 1656 of the NDAA FY2018 and deliver the physical valves to the Pearl Harbor Naval Shipyard IMF. The opportunity is designated as a total small business set-aside under NAICS code 332999. Managed by the Department of Defense through the Defense Logistics Agency, the contract requires performance at the Pearl Harbor location. Interested parties must submit their responses by October 29, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Casting and Forging for Valve SeatThis subcontract involves the production and supply of four raw cast or forged metal blanks for valve seats under National Stock Number 4820015218447. The selected provider will support prime contractors fulfilling Defense Logistics Agency requirements by utilizing industrial furnaces or forging presses to create near-net shape components. The scope of work includes essential heat treatment and material stabilization according to specific alloy requirements, with the mandatory provision of mill test reports to ensure material certification. The project is managed under the Department of Defense and is categorized under NAICS code 332111. Performance of the contract will take place in Fort Chaffee, Arkansas. Interested parties must adhere to the response deadline of October 29, 2026, to be considered for this procurement effort.

Iron and Steel Forging

POSTED

DEADLINE

Valve Seat Fabrication and ManufacturingThis subcontract involves the full manufacturing and fabrication of four Valve Seats, identified by NSN 4820015218447, for prime contractors supporting Defense Logistics Agency supply contracts. The work requires the use of precision machining equipment and specialized tooling to ensure all finished components adhere to strict DLA quality and dimensional technical specifications. The project is managed under NAICS code 332710 for the Department of Defense and will be performed at Fort Chaffee, Arkansas. Interested parties must note the response deadline of October 29, 2026, for this specific procurement effort.

POSTED

DEADLINE

Supply of Neutra Rust 661 Rust Arresting CoatingThis subcontract involves the supply of Neutra Rust 661, a vinyl-acrylic copolymer resin system manufactured by Neutra Rust International Ltd, for prime contractors supporting Defense Logistics Agency contracts. The requirement specifies the delivery of one gallon of Type I Code H product to Egg Harbor Township, New Jersey, ensuring a minimum shelf life of 12 months. The contractor must ensure strict adherence to several regulatory and technical standards, including 29 CFR 1910.1200, FED-STD-313F, MIL-STD-2073-1E, and MIL-STD-129. Additionally, the agreement mandates full compliance with the Buy American Act and requires official certification for the shipping of hazardous materials.

Soap and Other Detergent Manufacturing

POSTED

DEADLINE

Supply of Globe Valve (NSN 4820-01-661-2511)This subcontract involves the procurement and supply of one Globe Valve, identified by NSN 4820-01-661-2511, to support Defense Logistics Agency weapons support maritime hardware and electrical contracts. The selected provider is responsible for manufacturing or procuring the valve to exact specifications, ensuring the product is entirely free of Class I Ozone Depleting Chemicals, and delivering the compliant unit to the designated DLA location in San Diego, California. Managed under NAICS code 332911 for the Department of Defense, the opportunity was posted on October 18, 2026, with a response deadline of October 29, 2026. The contract focuses on strict adherence to technical standards and environmental regulations to ensure the component meets the operational requirements of the prime contractors.

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Raw Materials or Components for Globe Valve NSN 4820015547192This subcontract involves the supply of raw materials and precision-machined sub-components, specifically valve bodies, stems, or seats, to support Defense Logistics Agency supply contracts for Globe Valve NSN 4820015547192. The selected provider is responsible for sourcing certified alloys and metals and performing precision machining according to strict technical data specifications. Performance of this contract will take place in Schenectady, New York. Compliance with ITAR and EAR regulations is mandatory, and the provider must furnish Mill Test Reports or Certificates of Conformance to ensure material integrity. Interested parties must respond by October 29, 2026. The scope of work encompasses the delivery of either the final machined components or the necessary raw materials under NAICS code 332710.

POSTED

DEADLINE

Manufacture and Supply of Globe Valves (NSN 4820015547192)This subcontract involves the manufacture and supply of Globe Valves under NSN 4820015547192 for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for the fabrication and assembly of one Globe Valve, ensuring strict adherence to technical specifications and the execution of First Article Testing per CLIN 0002 and FAR 52.209-3. Final deliverables include the physical valve and a certified FAT report to validate quality standards. The project requires specialized FAT testing equipment and strict compliance with ITAR or EAR export control regulations. Performance will take place in Schenectady, New York, under NAICS code 332911. Interested parties must submit their responses by October 29, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Welding Nozzle Supplier/ManufacturerThis subcontract involves the manufacture and supply of welding nozzles for prime contractors supporting Defense Logistics Agency contracts. The supplier is responsible for ensuring all products meet the technical specifications for NSN 3431016286825 and must adhere to strict packaging, marking, and palletization standards, specifically MIL-STD-129, ASTM D3951, and RP001. Delivery of the physical goods is handled on an FOB Origin basis. Compliance requirements include adherence to the Buy American Act and DFARS 252.204-7012 regarding the safeguarding of covered defense information. The opportunity falls under NAICS code 332999 and is associated with the Department of Defense. Interested parties must respond by October 29, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Nut and Bolt Retainer SupplierThis subcontract involves the manufacture or sourcing of specialized nut and bolt retainers for prime contractors supporting the Defense Logistics Agency. The supplier must ensure all hardware meets NSN 5340LN0032833 and adheres to quality control standards outlined in DLA Master List RA001. Additionally, the contractor is required to comply with DFARS 252.225-7001 and follow specific packaging, marking, and palletization guidelines per ASTM D3951, MIL-STD-129, and RP001. The scope of work requires the delivery of two units of retainers FOB Destination to Jacksonville, Florida. This opportunity falls under NAICS code 332722 and is managed through the Department of Defense. Interested parties must submit their responses by October 26, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Fluid Cooler Core Assembly SupplierThis subcontract opportunity is for a supplier to provide two Fluid Cooler Core Assemblies for prime contractors supporting the Defense Logistics Agency. The selected vendor is responsible for manufacturing or procuring assemblies that meet the technical specifications for NSN 4420014409414, utilizing aluminum or copper alloys and specialized brazing or welding equipment. All units must undergo quality control according to DLA standards and be packaged in compliance with RP001 requirements. The procurement is designated as a Total Small Business Set-Aside under NAICS code 332410. Interested parties must submit their responses by October 29, 2026. Performance for this contract will take place in FPO 96678.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Helical Compression Spring Supplier (NSN 5360-01-627-5886)This subcontract involves the procurement of one helical compression spring for prime contractors under a Defense Logistics Agency project. The selected supplier is responsible for manufacturing or sourcing the component to meet the exact specifications of NSN 5360-01-627-5886, utilizing precision spring-winding and heat-treatment equipment to ensure compliance with military technical and quality standards. To be eligible, providers must possess a valid CAGE code and active SAM registration. The contract requires the delivery of the completed spring to a specified destination in FPO 09583. Responses to this requirement are due by October 29, 2026, under NAICS code 332613.

Spring Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS