Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Legacy System Upgrade and Integration Package

Active

Federal

Response Deadline07/20/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the development of a system upgrade package to modernize legacy pop-up target systems by integrating them with new control and communications infrastructure, ensuring enhanced operational effectiveness and compatibility with current military standards. This effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 541511 indicating it falls under Custom Computer Programming Services. The work is specifically tied to Fort Moore, Georgia, where the upgraded systems will be deployed and tested as part of broader modernization initiatives within the Department of Defense. The solicitation was posted on June 22, 2026, and responses are due by July 20, 2026, at 6:00 PM Eastern Time, leaving a five-week window for qualified small businesses to prepare and submit proposals. The contracting activity is managed by the FA4830 23 Cons Cc office, and the project emphasizes technological modernization while maintaining strict compliance with federal subcontracting guidelines for small business participation.

General Info

Small business subcontract for pop-up target system upgrade at Fort Moore, Georgia, under NAICS 541511, due July 20, 2026.

Agency

Department Of Defense → FA4830 23 Cons CcView Agency

NAICS

541511 - Custom Computer Programming ServicesView NAICS

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 22

subcontract

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2026, 06:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4830 23 Cons Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4830 23 Cons Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development of a system upgrade package to integrate legacy pop-up target systems with new control and communications infrastructure.

Similar Contracts

Same NAICS industry code

D--Software Development Services for Coastal Remote S

Office Of Acquisiton Grants

POSTED

about 20 hours ago

DEADLINE

7A21--Amion Enterprise Agreement (VA-26-00071814)The Department of Veterans Affairs Technology Acquisition Center intends to award a sole source contract to DOXIMITY INC. for the subscription and ongoing technical support of the Amion healthcare scheduling platform, which enables VA hospitals to manage real-time on-call and shift schedules for medical staff, ensuring timely provider availability for urgent care needs such as stroke, heart attack, and emergency surgeries. This platform supports Veteran-centered care by aligning physician coverage with critical specialty and mental health requirements. Technical support must be provided 24/7/365 and include all updates, security patches, system fixes, regulatory compliance adjustments, third-party integrations, and seamless migration of data from existing non-Amion systems without operational disruption. The contract will be awarded as a firm-fixed-price agreement under the sole source authority of FAR 6.103-1, as Amion is deemed the only solution meeting the Department’s unique requirements. Interested parties may submit a capabilities statement by July 22, 2026, at 1:00 PM EST to demonstrate their ability to fulfill the requirement, but the Government retains full discretion to proceed without competition if no viable alternatives are presented. All submissions must be in writing; verbal responses will not be considered. The point of contact for this action is Phillip Kang, Contract Specialist, reachable at Phillip.kang@va.gov.

Technology Acquisition Center Nj (36C10B)

POSTED

about 20 hours ago

DEADLINE

Electronic Flight Bags-iPad Mini 7The United States Air Force is seeking a single Firm Fixed Price Purchase Order for Apple iPad Mini 7 models, specifically the 8.3-inch A17 WiFi variant with 256GB storage, to support electronic flight bag requirements. All offerings must meet the exact specifications detailed in Attachment 1 and are required to be delivered directly to Aviano Air Base in Italy. This acquisition is exclusively reserved for Women-Owned Small Businesses certified in the SBA’s Small Business Certification database; only qualifying WOSB entities are eligible to respond, and non-WOSB submissions will be rejected outright. The solicitation number is FA568226QA058, with responses due by July 27, 2026, and the North American Industry Classification System code is 541511. Funds for this requirement are not currently available, and any award is entirely contingent upon the future appropriation of funds in accordance with FAR 52.232-18. The U.S. Government reserves the right to make no award regardless of the number or quality of submissions. The contract opportunity is managed by the Department of Defense through the office headquartered in APO, AE, with Point of Contact Jason Haro as the primary representative and Jessica De Benedet as the secondary contact. The solicitation is posted on SAM.gov under the specified UI link and is categorized as a combined source selection with a sole source WOSB set-aside.

FA5682 31 Cons (unit 6102)

POSTED

about 20 hours ago

DEADLINE

Notice of Intent to Sole Source Services for Feature Development of Adaxis AdaOne software platformThe U.S. Army Corps of Engineers, Engineer Research and Development Center’s Geotechnical and Structures Laboratory, Concrete and Materials Branch, intends to award a sole-source contract to Adaxis USA, Inc. for the development, maintenance, enhancement, and technical support of the AdaOne software platform, which is critical to advancing additive manufacturing research for large civil works components. The software must deliver precise control over fiber-reinforced deposition, including continuous toolpath generation without breaks, discrete start and stop zones for regional fiber application, gradual initiation sequences to protect connection points, user-defined preferential directions for fiber infill, and strict geometric constraints to enforce minimum and maximum bend radii—recommended at 1 to 2 centimeters—to prevent fiber damage. These capabilities are essential to ensuring the reliability and performance of 3D-printed structural elements under research conditions. The procurement falls under NAICS code 541511 for custom computer programming services with a $34 million size standard and is being conducted under FAR Part 12 for commercial products and services. This notice is not a solicitation for competitive bids, but parties may submit capability statements with pricing by the deadline of 3:00 p.m. Central Time on Friday, July 24, 2026, via email to the designated points of contact. Submissions must be in Word, Excel, or PDF format and will be evaluated solely to determine whether competition is feasible. If no meaningful responses are received within fifteen days of publication, the acquisition will proceed as a sole-source award to Adaxis USA, Inc. No phone inquiries will be accepted, and the Government retains full discretion over the decision to proceed without competition.

W2R2 USA Engr R & D Ctr

POSTED

about 20 hours ago

DEADLINE

Web-Based Training Development for Ralph H Johnson VAMCThis contract seeks web-based training development services for the Ralph H Johnson VAMC under RFQ 36C24726Q0690, structured as a firm-fixed price award through a commercial items solicitation under FAR Part 12. The requirement is strictly set aside 100% for small businesses, with the NAICS code 541511 (Custom Computer Programming Services) and a size standard of $34.0 million. The work involves two distinct phases: a base year from September 1, 2026, through August 31, 2027, and an optional one-year extension from September 1, 2027, through August 31, 2028. Key deliverables include ongoing oversight, support, and enhancement of the Transplant Medication Monitoring Dashboard across five VA sites, as well as integration of digital and graphic enhancements with interactive learning modules on top of the existing base-year system. Quotes must be submitted via email to thaddeus.gray@va.gov no later than July 28, 2026, at 12:00 PM ET, with no hand delivery or fax accepted, and must adhere to a 4MB email limit. Offers must include two volumes: technical capability demonstrating compliance with the Statement of Work and a complete pricing schedule covering both base and option periods. All submissions must be signed, dated, and include the solicitation number, offeror’s UEI, contact details, and explicit agreement with all terms. Offers are evaluated on technical capability and price, with past performance considered but carrying less weight than the other two factors. The government may award without discussions and reserves the right to reject any or all offers. Contract performance is F.O.B. destination at the Charleston, SC, VA facility, with delivery expected within 30 days of award. The contract includes standard FAR provisions for inspection, acceptance, payment, disputes, and termination for convenience or cause, along with specific clauses addressing contractor compliance with labor standards, equal opportunity, prohibitions on trafficking and discriminatory DEI activities, cybersecurity, and electronic payments via EFT. The contract duration, including any options, is capped at five years, with a 6-month services extension available under 52.217-8. Compliance with SAM registration, prompt payment rules, and the VA’s specific requirements such as electronic payment submissions and adherence to Executive Order 13899 is mandatory

247-NETWORK Contract Office 7 (36C247)

POSTED

about 20 hours ago

DEADLINE

AI-Enabled Manpower Modeling and Readiness Optimization Solution

Director Of Contracting

POSTED

about 20 hours ago

DEADLINE

Website Redesign & Front-End DevelopmentThe City of Meriden is seeking a contractor to redesign and develop a modern, accessible, and mobile-responsive website using HTML5, CSS3, and JavaScript. The project requires comprehensive UI/UX design, planning for content migration, and full front-end implementation to ensure a seamless user experience across all devices. The website must meet current accessibility standards and reflect the City’s commitment to inclusive digital services. This subcontract opportunity is open for bids with a response deadline of August 7, 2026, and is classified under NAICS code 541511 for custom computer programming services. All work is to be performed in support of the City of Meriden’s digital presence, with submissions managed through the Connecticut Purchasing portal.

POSTED

about 21 hours ago

DEADLINE

Decision Support Tool Integration

Energy Commission

POSTED

DEADLINE

SCADA System Upgrades and Compliance SupportThe contract seeks technical expertise to support the upgrade of SCADA hardware and software systems, with the primary objectives of ensuring regulatory compliance and modernizing critical infrastructure. The work involves providing accurate technical estimates and hands-on implementation assistance throughout the upgrade process, ensuring seamless integration of new systems while maintaining operational continuity and meeting all applicable standards. The scope is focused on enabling the California Department of Corrections & Rehabilitation to maintain secure, reliable, and up-to-date supervisory control and data acquisition capabilities. The opportunity is issued as a subcontract under NAICS code 541511, indicating it is for custom computer programming services, and is posted on the CalEProcure portal with a response deadline of July 31, 2026. While no specific location for performance is detailed, the contracting agency is based in California, and the work is expected to support state-owned facilities and systems under its jurisdiction. There is no set-aside designation specified, and no point of contact information has been provided, requiring potential bidders to review the official posting on the CalEProcure platform for additional submission details.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Cybersecurity for Controlled Unclassified Information (CUI)The contract requires the implementation of NIST Special Publication 800-171 security controls to protect Controlled Unclassified Information (CUI) within contractor systems, ensuring compliance with federal cybersecurity standards for handling sensitive but unclassified data. This subcontract is tied to the Department of Defense and specifically supports the Medical Supply Chain MD Surg FSF, with performance centered at Fort Stewart, Georgia, 31314-5185. The solicitation, posted on July 16, 2026, mandates a response by July 22, 2026, and falls under NAICS code 541511, indicating it pertains to computer systems design and related services. Compliance with NIST SP 800-171 involves establishing and maintaining a range of security controls covering access control, audit, configuration management, identification and authentication, maintenance, media protection, personnel security, physical protection, risk assessment, system and communications protection, and incident response to secure CUI at all stages of handling. Contractors must demonstrate the technical capability and operational readiness to fully implement these controls within their information systems before performance begins.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Electronic Invoicing and WAWF Integration SupportThe contract seeks support services for electronic invoicing through the Wide Area Workflow system, encompassing end-to-end invoice submission, coordination of receiving reports, and monitoring of payment status to ensure timely and accurate financial processing. This subcontract is focused on integrating and maintaining seamless operations within the Department of Defense’s maritime supply chain, requiring proficiency in DLA’s WAWF platform and adherence to standardized federal invoicing protocols. The work is performance-based and must be executed at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and falls under the NAICS code 541511 for Computer Systems Design Services. While no set-aside designation is specified, the contract is classified as a subcontract within the broader DOD procurement framework. The agency responsible is the Maritime Supply Chain under the Department of Defense, and interested parties must engage through the official DIBBS portal to submit proposals. All deliverables must align with federal requirements for electronic data interchange and financial accountability, emphasizing accuracy, timeliness, and compliance with DoD standards.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

API & System Integration ServicesThe contract seeks qualified vendors to develop and manage API and SFTP integrations between a SaaS platform and the existing systems of the Trinity River Authority of Texas, ensuring seamless data synchronization in JSON and CSV formats. The work involves designing secure, reliable data exchange protocols that align with the Authority’s infrastructure requirements, supporting real-time or scheduled transfers of operational and administrative data. Vendors must demonstrate expertise in integration architecture, data mapping, error handling, and system compatibility across disparate platforms. This subcontract opportunity is open for response until August 7, 2026, with a competitive bid process managed through the ProcureWare platform. The NAICS code 541511 indicates the scope centers on custom computer programming services, emphasizing technical implementation over general consulting. The place of performance and agency office details are unspecified, but the work will directly support Texas-based operations. Proposals must address compliance with industry standards for data security, interoperability, and system uptime, as failures may impact critical water resource management functions.

Trinity River Authority of Texas

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

Training Facility & Logistics SupportA secure, large-scale indoor industrial facility is required within a nine-hour drive of Moody Air Force Base to support full mission profile training, including environmental simulation and comprehensive logistics support. The facility must be capable of replicating real-world operational conditions to enable realistic and mission-critical training scenarios for military personnel. The contract is classified as a subcontract under NAICS code 531120, with a response deadline of July 22, 2026, and is managed by the Department of Defense through FA4830 23 Cons Cc. Performance is to occur at Fort Moore, Georgia, with the facility serving as the central hub for training activities and supporting the full spectrum of logistical needs required for sustained, high-fidelity exercises.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

about 20 hours ago

DEADLINE

Live Tissue Training (LTT) Program Support ServicesThe Live Tissue Training (LTT) Program Support Services contract seeks to deliver advanced medical training for military personnel using live tissue models to simulate surgical and trauma response scenarios, ensuring hands-on readiness under strict regulatory standards. The training is designed to replicate real-world combat medical conditions, enhancing the proficiency of personnel in high-stress, time-sensitive procedures while adhering to all applicable federal and military compliance frameworks. This subcontract emphasizes immersive, high-fidelity learning environments to improve clinical outcomes and operational effectiveness in battlefield medical scenarios. The contract is administered by the Department of Defense under agency FA4830 23 Cons Cc, with performance required at Fort Moore, Georgia, 31699. It falls under NAICS code 611430, indicating classification within medical and dental schools and other health-related educational services. The opportunity was posted on July 17, 2026, with responses due by July 22, 2026, specifying a narrow window for submission. While no solicitation number or set-aside details are provided, the focus remains on securing qualified subcontractors capable of delivering compliant, high-quality live tissue training services that meet the Department of Defense’s operational and ethical standards.

Professional and Management Development Training

POSTED

about 20 hours ago

DEADLINE

Full Mission Profile Combat Rescue & Medical TrainingA five-day full mission profile training program is being sought for the 38th Rescue Squadron to evaluate combat readiness, rescue operations, and advanced medical capabilities under realistic operational conditions. The training must simulate real-world scenarios to test and enhance the squadron’s ability to execute complex rescue missions with integrated medical support, ensuring personnel are prepared for high-stress, dynamic environments. This subcontract opportunity is tied to the Department of Defense through the FA4830 23 Cons Cc office, with performance required at Fort Moore, Georgia, under the NAICS code 611699 for other schools and instruction. The solicitation was posted on July 17, 2026, and responses are due by July 22, 2026, with no set-aside classification specified and no designated point of contact provided.

All Other Miscellaneous Schools and Instruction

POSTED

about 20 hours ago

DEADLINE

38 RQS Full Mission Profile TrainingThe 23D Contracting Squadron at Moody AFB is seeking a contractor to deliver a five-day, full mission profile training program scheduled for July 27–31, 2026, under solicitation FA483026Q0053. The training must take place at a secure, large-scale indoor industrial facility located within a nine-hour drive of Moody AFB and must accommodate 24 personnel, including 20 students and 4 evaluators from the 38th Rescue Squadron. The program is designed to assess and validate combat readiness, rescue operations, and advanced medical capabilities under realistic, all-weather conditions in alignment with the Statement of Objectives. The contract will be awarded using the Lowest Price Technically Acceptable methodology, with travel expenses for venues outside the nine-hour radius factored into the evaluation. All required details, including technical specifications, evaluation factors, and compliance instructions, are found in the attached solicitation document and must be fully addressed by offerors. Proposals must be submitted by 9:00 AM EST on July 22, 2026, with questions due by the same deadline on July 20, 2026. The contracting officer is 1st Lt Nasir Smith and the contract specialist is SrA Maximos Ramirez, both reachable via email and phone provided in the solicitation. The performance location is designated as Fort Moore, Georgia, and the NAICS code for this acquisition is 611699. No set-aside is being applied, and the opportunity is open to all qualified vendors. The solicitation is fully electronic, with all documentation hosted through the SAM.gov platform and accessible using the provided UI Link.

All Other Miscellaneous Schools and Instruction

POSTED

about 20 hours ago

DEADLINE

Laser EtcherThe 74th Fighter Generation Squadron is seeking a commercial-off-the-shelf laser etcher system to establish an in-house capability for permanently marking squadron assets, tools, and equipment with critical identification information. This acquisition is essential to meet mission requirements under AFI 21-101, as hand engraving is insufficient for durability and material integrity. The system must be capable of engraving on a range of materials, including hardened tool steels like M43 and chrome-moly, as well as rubber, foam, plastic, acrylic, glass, and wood. A mandatory feature is a 12-inch minimum workpiece height capability, along with a 39-inch by 24-inch working area to accommodate large items such as torque wrenches and breaker bars. The equipment must support automatic laser selection based on material, include rotational attachments and task plates for cylindrical objects, and come with a camera system for precise alignment. It must operate on a standard 110V outlet, feature a 4-inch exhaust port, and include integrated design software compatible with Windows. The vendor must provide on-site installation, five-person operator training, a manufacturer warranty, and direct technical support contact information. The requirement is strictly for a ready-made COTS product with no customization allowed, and failure to acquire it would force costly and mission-threatening outsourcing. This is a total small business set-aside under NAICS code 333517, with responses due by July 21, 2026, and the office managing this effort is located at Moody AFB, Georgia, with performance at Fort Moore.

Machine Tool Manufacturing

POSTED

about 20 hours ago

DEADLINE

38 RQS Free Fall training

All Other Miscellaneous Schools and Instruction

POSTED

DEADLINE

FPV Quadcopters, Unassembled FPV Quadcopter Kits, FPV Pilot KitsThis sources sought notice is issued for market research to identify potential vendors capable of supplying commercial off-the-shelf 7-inch First Person View quadcopter drones, unassembled drone kits, and FPV pilot kits including goggles and controllers. The government seeks 100 complete drones, 16 unassembled kits, 17 pilot kits, and one 3-day user training session. All equipment must weigh between one and two pounds,具备 a minimum payload capacity of five pounds and maximum of six pounds, operate at speeds between 100 and 120 miles per hour, and be fully NDAA-compliant under Section 848/889, ensuring no restricted foreign components in the flight controller, long range system, video transmitter, camera, or goggles. The systems must feature a solder-free design for easy field maintenance and an open architecture with no proprietary restrictions. Responses must include company details, a capability statement, socio-economic status, and reference the Sources Sought ID FA483026Q0035. No financial reimbursement will be provided for submission costs, and this notice does not obligate the government to issue a contract. All submissions must be emailed to SSgt Justin De Jesus by 4:00 PM Eastern Time on Monday, 20 July 2026. The requirement is set aside exclusively for small businesses as defined by the SBA.

Aircraft Manufacturing

POSTED

DEADLINE

Pop-up Target SystemThe contract solicitation FA483026Q0043 seeks a Total Small Business Set-Aside for the procurement of a comprehensive pop-up target system to be deployed at the Grand Bay Range, Moody Air Force Base, Georgia. The contractor must deliver nineteen new battery-powered pop-up targets designed to precisely match the existing ATA "PIT" target form factor and size for seamless integration into current berms. Alongside the targets, the contractor is required to supply two battery-powered control tablets for range tower operators and three battery-powered hand-held controllers for maintenance personnel, all running software capable of accurate hit scoring, real-time battery monitoring, control of background lighting effects, and triggering simulated return gunfire modes. A dependable long-range wireless communications network with a minimum two-mile operational range must be established between the range tower and target areas, with network components permitted to be solar- or battery-powered. The contractor must also provide a legacy upgrade package to ensure full compatibility of existing ATA pop-up targets and chassis with the new system. Comprehensive training for Grand Bay Range personnel covering routine operations, troubleshooting, battery and solar maintenance, and software use is required. A site visit was conducted on July 1, 2026, at the Grand Bay Range East Gate in Valdosta, Georgia, with all vendor inquiries due by July 8, 2026, and responses to those inquiries published via amendment on SAM.gov. Responses to this solicitation must be submitted electronically via email to the designated points of contact no later than 2:00 PM EST on July 20, 2026, and must reference the RFQ number and title. The NAICS code for this procurement is 333310, and only small business concerns qualify to respond. All hardware and software deliverables must be installed and trained at the Grand Bay Range, with no specified contract value or pricing details provided.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

On-Site Installation, Testing, and TrainingThe contract entails on-site installation, system testing, and technical training for military personnel focused on the operation, troubleshooting, and maintenance of a range target system. All work must be performed at Fort Moore, Georgia, with the contractor responsible for delivering comprehensive hands-on training to ensure military personnel are fully proficient in system use and upkeep. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility to small businesses as defined by the Small Business Administration. The North American Industry Classification System code is 238990, indicating the work falls under other construction related services. The contract is issued by the Department of Defense under the FA4830 23 Cons Cc office and is classified as a subcontract. Responses must be submitted by July 20, 2026, at 6:00 PM Eastern Time, with the opportunity posted on June 22, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Target Control and Monitoring Software DevelopmentThe contract seeks the development and integration of specialized software to enhance pop-up target systems with advanced functionality including hit scoring, precise lighting control, simulated return fire effects, and real-time battery monitoring. The software must be designed for seamless operation within military training environments at Fort Moore, ensuring accurate feedback and reliable performance under field conditions. The project requires robust real-time data processing and coordination between hardware components to deliver immersive and responsive training experiences. This is a small business set-aside subcontract under the NAICS code 541512 for computer systems design services, issued by the Department of Defense through the FA4830 23 Cons Cc office. Proposals must be submitted by July 20, 2026, and performance is expected to take place primarily at Fort Moore, Georgia. The contracting authority emphasizes capabilities that enable modernized, tech-driven live-fire training systems, with a focus on integration, reliability, and operational readiness in support of defense training objectives.

Computer Systems Design Services

POSTED

DEADLINE

Range Tower and Maintenance Control Hardware SupplyThe contract calls for the supply of ruggedized, battery-powered tablets and handheld controllers to support range operators and maintenance personnel at Fort Moore, Georgia, under a total small business set-aside as defined by the SBA. These devices must be engineered for harsh operational environments typical of military training ranges, ensuring durability, reliable performance, and extended battery life without requiring frequent recharging or maintenance. The solicitation is designated as a subcontract under NAICS code 334511, which classifies the manufacture of computer and peripheral equipment, and is open exclusively to small businesses as part of a federal set-aside program aimed at promoting small business participation in defense contracts. The opportunity was posted on June 22, 2026, with a response deadline of July 20, 2026, at 6:00 p.m. EST, and is managed by the Department of Defense through the FA4830 23 Cons Cc contracting office. Performance will be carried out at Fort Moore, with all delivered equipment expected to meet stringent military-grade specifications for environmental resilience, security, and interoperability with existing range control systems. While specific technical requirements are not detailed here, proposers must demonstrate capability to deliver hardware that supports seamless command, control, and maintenance functions in field conditions, and satisfy all compliance, certification, and delivery timelines mandated by the contracting agency.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Long-Range Wireless Communications Network Supply and InstallationThe contract calls for the supply and deployment of a long-range wireless communications network capable of operating over a minimum distance of two miles, specifically designed for use on remote military ranges. The system must support reliable, high-performance connectivity in challenging field environments and may incorporate optional solar-powered or battery-powered components to enable operation in locations without access to conventional power sources. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the North American Industry Classification System code 334220 indicating it pertains to communications equipment manufacturing. Performance of the work is required at Fort Moore, Georgia, with a response deadline of July 20, 2026, and the solicitation originates from the Department of Defense under the agency designation FA4830 23 Cons Cc.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE