Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LENS, LIGHT

Active
SPE4A5-26-T-317YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single unit of a lens and light component identified by NSN 6220-01-343-3962 and part number 25-0929-1543, classified as a commercial item. The requirement is governed by a set of technical, quality, and packaging standards, including mandatory compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with special fragile labeling. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical attributes are subject to stringent verification levels. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. The item is designated for delivery FOB origin within 20 days to a military recipient in Kaohsiung, Taiwan, with no variance allowed in quantity. Unit of issue is each, and the contract references a comprehensive set of DLA technical and quality requirements available through their official portal. Packaging must adhere to DLA-specific palletization and container directives, and all documentation must support source approval and traceability. The contract is issued under a federal solicitation with a designated point of contact and is intended for Defense Logistics Agency acquisition.

General Info

Procure one lens and light component FOB origin to Kaohsiung, Taiwan, within 20 days under strict DLA and MIL-STD requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-317Y for DLA Aviation Supplier OEM Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Sarah Kennedy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LENS,LIGHT
LENS, LIGHT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
--
--
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
--
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
--
SPE4A5-26-T-317Y
SECTION B
ONTIC ENGINEERING & MANUFACTURING, INC 45934 P/N 25-0929-1543
GRIMES AEROSPACE COMPANY 72914 P/N 25-0929-1543
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017702691 0001 EA 1.000
NSN/MATERIAL:6220013433962
SPE4A5-26-T-317Y
SECTION B
PR: 7017702691 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWZ00
TAIWAN ARMY
ZUO-YING AMMUNITION SUB
NO. 127, GUSHAN 3RD RD
KAOHSIUNG CITY
TW
MARKFOR
BTWZ00
TAIWAN ARMY
ZUO-YING AMMUNITION SUB
NO. 127, GUSHAN 3RD RD
KAOHSIUNG CITY
TW
M/F: (TCN) PTWZ5V62082077
RDD:
PROJ: TP 2
SUPP ADD: BA4KMX SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE4A5-26-T-317Y NSN/Part Number: 6220-01-343-3962 Quantity: 1 EA Purchase Request: 7017702691QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
Reel Assembly, Hose SupplyThe contract calls for the supply of a complete reel assembly with hose as a commercial off-the-shelf item, ensuring it meets all applicable military specifications without modification. The item must be delivered in its existing commercial form but is subject to destination inspection to verify compliance with required military standards, emphasizing functionality, durability, and performance under operational conditions. The procurement is structured as a subcontract and falls under the NAICS code 336320, which pertains to other transportation equipment manufacturing, indicating the focus is on specialized equipment used in defense logistics or vehicle systems. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Department of Defense through its Construction & Equipment Manu & Con agency. Although specific location details for the place of performance or point of contact are not provided, the procurement is hosted on the DIBBS platform, which governs defense-related contract opportunities. The requirement for destination inspection underscores the government’s need to validate compliance prior to acceptance, and bidders must ensure the COTS product inherently satisfies all military standards without customization or retrofitted components.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
Marine Seat Manufacturing and AssemblyThe contract seeks a subcontractor to fabricate and perform final assembly of a marine seat designated by NSN 2090-20-008-1750 and Part No. SWP-1055-LM, adhering strictly to military specifications with engineering approval required from the government. The work involves precision manufacturing processes to meet operational standards for naval environments, ensuring durability, safety, and compatibility with military platforms. All components and assemblies must comply with documented technical requirements and undergo verification under government oversight to confirm conformance. Performance is required at the location in Virginia Beach, Virginia, with a response deadline of August 13, 2026, and the solicitation posted on August 2, 2026. The North American Industry Classification System code 336320 identifies this as part of the transportation equipment manufacturing sector, specifically focusing on ship and boat building or related component fabrication. The ordering activity is the Fluid Handling Division under the Department of Defense, indicating the end-use is for defense-related maritime operations. Subcontractors must be prepared to meet schedule demands and quality controls typical of military procurement while operating under federal contracting obligations without set-aside designations.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336320
New
DIBBS
PARTS KIT, ELECTRICAL E
Solicitation # SPE7L1-26-T-902M
The contract is for a parts kit labeled as ELECTRICAL ENGINE STARTER with NSN 2920-00-089-3369, quantity of 21 units, under Purchase Request 7017688184, with delivery required within 20 days after award. The solicitation, identified as SPE7L1-26-T-902M, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense through the Land Supply Chain organization. The place of performance is designated as Camp Lejeune, North Carolina, with Kristina Derry as the primary point of contact. Technical data associated with this item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer to foreign persons, regardless of location. This restriction extends to foreign national employees and overseas subsidiaries of U.S. companies and is governed by DFARS 252.225-7048. Access to the controlled technical data is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training and questionnaires, and have received explicit approval from the DLA controlling authority for data access.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M3-26-T-7807
The contract is for a strainer element, sediment with NSN/part number 4730-01-320-7111, quantity of 131 units, under purchase request 7017437890, with delivery required within 200 days after award. The solicitation number is SPE7M3-26-T-7807, posted on August 2, 2026, with responses due by August 13, 2026. It is classified under NAICS code 336320 and issued by the Department of Defense’s Fluid Handling Division. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States or abroad, and applies to all entities including U.S. subsidiaries. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires and received explicit authorization. The place of performance is New Cumberland, Pennsylvania, 17070-5002, with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LI
Solicitation # SPE4A6-26-T-98F3
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking quotations for four indicating panels with NSN 6220013547598, to be delivered to DLA Distribution Cherry Point within 107 days after award. The item is classified under NAICS code 336320 and the solicitation number is SPE4A626T98F3, posted on June 22, 2026, with a response deadline of June 29, 2026. Only the approved source 97424 3103W21G701 is authorized for this procurement, though all responsible sources may submit quotes if received electronically before the deadline. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided. Quotations must be submitted electronically via the SAM.gov platform, and inquiries should be directed to the designated point of contact listed in Block 5 of the solicitation document, accessible through the provided UI link or by searching the solicitation number on DIBBS.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336320
New
Federal
Seating Module SupplyThe contract seeks the supply of a passenger seating module designed for integration into naval aircraft or vessel interiors, classified as a commercial or custom item under NAICS code 336320. The work is scoped as a subcontract under the Department of Defense, specifically managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, with a response deadline set for August 12, 2026, at 5:00 p.m. Eastern Time. The module must meet stringent military standards for durability, safety, and compatibility with existing naval platforms, ensuring seamless installation and long-term operational reliability in demanding environments. All deliverables are expected to align with defense-specific requirements for space utilization, weight constraints, and environmental resilience, including resistance to saltwater, extreme temperatures, and high vibration. While no set-aside designation or point of contact is specified, the solicitation is open to qualified vendors capable of fulfilling defense logistics needs with either commercial-off-the-shelf solutions or customized designs. The seating module must support passenger comfort and crew ergonomics without compromising structural integrity or mission-critical space allocations aboard naval assets. Performance is anticipated to occur across naval facilities managed by the Department of Defense, with the exact location undetermined. Interested parties must submit proposals prior to the deadline through the official SAM.gov portal, ensuring full compliance with technical specifications, quality assurance protocols, and delivery timelines required for military integration.
Navsup Flt Logistics Ctr Puget Sound

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
Brake Drum Supply and BalancingThe contract pertains to the supply of balanced brake drums as serviceable defense hardware, requiring the contractor to either manufacture or source components that meet military specifications, followed by precise balancing, inspection, and compliance with MIL-STD-129 packaging and labeling standards. All work must ensure the brake drums are fully functional and ready for immediate use in military vehicle systems, with strict adherence to quality and documentation requirements throughout the production and delivery process. The place of performance is specified as Tracy, California, with the ZIP code 95304-5000, indicating the physical location where the product must be delivered or prepared for issue. This is a subcontract opportunity under the NAICS code 336320, which classifies it within the automotive parts manufacturing sector, and it is managed by the Department of Defense through the Land Supplier Operations Vehicle Support organization. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, giving potential subcontractors a short window to submit proposals. While no set-aside type is designated, the requirement clearly targets qualified suppliers capable of handling defense-grade components with rigorous technical and logistical standards. The contract is accessible via the DIBBS portal, and all submissions must align with the Department of Defense's procurement protocols for serviceable hardware.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
Aircraft Lighting Subassembly ManufacturingThe contract requires the manufacture and assembly of a commercial off-the-shelf (COTS) light subassembly with part number 66-2778-1, specifically designed for aerospace applications and must fully comply with original equipment manufacturer and defense technical specifications. The work is classified as a subcontract under NAICS code 336320, indicating its alignment with aircraft parts and accessories manufacturing, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and is administered by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, reflecting its critical role in supporting defense-related aerospace systems. All submissions must meet stringent quality and compliance standards to ensure operational reliability in high-stakes environments.
ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 336320
New
DIBBS
Manufacture and Supply of Disk Brake Kit (NSN: 2530016795071)The contract mandates the manufacture, quality assurance, packaging, and delivery of eight military-specification Disk Brake Kits identified by NSN 2530016795071, to be completed in accordance with stringent defense and safety standards. All units must conform to MIL-STD-129 for proper labeling and documentation, ensuring traceability and readiness for military logistics systems, while also adhering to OSHA hazard communication requirements, which include the submission of complete safety data sheets for all components and materials used in the kits. The work is subject to rigorous quality controls to guarantee reliability under operational conditions, with compliance verified through documented procedures and inspections. The solicitation, issued under NAICS code 336320 for automotive brake system manufacturing, is classified as a subcontract and was posted on July 30, 2026, with a response deadline of August 10, 2026. The contracting organization is the Land Supply Chain under the Department of Defense, though no specific office address or point of contact is provided. Performance is expected to meet military supply chain requirements without geographic restriction specified, and all submissions must be made through the official DIBBS portal linked in the contract details. Timely compliance with documentation, labeling, and delivery timelines is critical to procurement approval.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
ROTOR ASSEMBLY
Solicitation # SPE7L1-26-T-848N
The contract pertains to the procurement of two rotor assemblies with NSN 2920000806489 for use in the Detroit Diesel Allison Division of GMC Model 149 diesel engine, supplied by Rolls-Royce Solutions America Inc under part number 5139168. Delivery is required within 20 days after order placement to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, with FOB origin terms, where both inspection and acceptance occur. Packaging must strictly comply with MIL-STD-2073-1E, utilizing preservation method 33, cleaning/drying method 1, preservation material 49, wrapping material GB, cushioning material GA, and an E5 unit container with OPI O, packaged at level B with code Q. Marking must adhere to MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement, excluding overpacking if the unit container is a wooden box or crate. Mercury or mercury-containing compounds are prohibited unless part of functional components like batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; in such cases, portable lamps and instruments must be shock-proof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List referenced online, and all deliverables must align with DFARS provisions on covered telecommunications equipment, safeguarding covered defense information, and prohibition of hazardous substances. Cybersecurity controls under NIST SP 800-171 and DFARS 252.204-7012 are mandatory, and contractors must submit Safety Data Sheets for all hazardous materials prior to award. The contract mandates electronic submission via DIBBS by July 30, 2026, with payment processing exclusively through WAWF, and includes clauses for small business representation, accelerated payments to small business subcontractors, unenforceability of unauthorized obligations, inspection under FAR 52.246-2, and default provisions. The unit price is $389.59 per unit, totaling $779.18, with no variance allowed. No contract type is officially specified, but the structure indicates a fixed-price supply contract, and no options, modifications, or extended quantities
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 336320
New
DIBBS
MOUNT, RECTIFIER, ALT
Solicitation # SPE7L5-26-T-4662
The contract is for the procurement of 115 units of a mount rectifier alternator identified by NSN 2920-00-116-9485 under solicitation SPE7L5-26-T-4662, with a response deadline of August 10, 2026, and a delivery requirement of 120 days after order. The item falls under NAICS code 336320 and is managed by the Department of Defense through the Land Supplier Ops Engines organization, with performance to be delivered to Tracy, California, ZIP 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which must be accessed online, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment updates it. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and all compliance with DLA packaging requirements is mandatory. Primary point of contact is Shane Harrington, reachable via email and phone provided.
LAND SUPPLIER OPNS ENGINES

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
TEE, PIPE
Solicitation # SPE7M3-26-T-7773
This contract specifies the procurement of a TEE, PIPE item identified by NSN 4730-01-418-9505 and part number 44Z486D7, with a quantity of 91 units, each priced at $91.00, for a total contract value of $8,281.00. Delivery is required within 168 days with FOB origin terms, meaning the supplier is responsible for packaging and initial transport but not for in-transit costs or risks beyond the shipping point. The item must be delivered to DLA Distribution Anniston in Anniston, Alabama, and inspection and acceptance occur at destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and containerization standards, with marking requirements adhering to MIL-STD-129 and no special marking codes applied. The quantity variance is strictly zero percent, meaning exact delivery of 91 units is mandated without tolerance. Packaging and palletization must follow DLA’s RP001 requirements, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation, issued under number SPE7M3-26-T-7773, was posted on July 30, 2026, with proposals due by August 10, 2026, and falls under NAICS code 336320 for fluid handling systems. Technical and quality requirements are inherited from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, and apply per the revision in effect on the solicitation issue date. The point of contact for inquiries is William Cain, with direct phone and email provided.
FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Commercial Supply Chain and Logistics CoordinationThe contract involves end-to-end logistics management for the delivery of contract line items, requiring strict adherence to MIL-STD-129 labeling standards and RP001 packaging specifications, ensuring all physical and documentation requirements meet military compliance. Responsibility includes orchestrating shipment logistics and submitting WAWF invoices accurately and on time to facilitate seamless payment and tracking throughout the supply chain process. The work must be performed in alignment with Department of Defense protocols, with performance centered at the location specified by the zip code 17070-5002 in New Cumberland. The solicitation is structured as a subcontract under NAICS code 484220, indicating a focus on truck transportation and related logistics services. Interested parties must submit responses by the deadline of August 10, 2026, following the procedures outlined in the DIBBS system under solicitation number SPE4A526T318U.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and First Article Testing (FAT) ServicesThe contract requires comprehensive quality inspection and First Article Testing services aligned with MIL-STD-1916 or ASQ H1331 standards, utilizing AQL sampling criteria with stringent acceptance levels: critical defects at 0.1, major defects at 1.0, and minor defects at 4.0, with an absolute zero tolerance for non-conformances. All testing and inspection activities must be performed to ensure full compliance with military and industry quality benchmarks, emphasizing rigorous verification of initial production samples before full-scale manufacturing. The work is scoped under a subcontract agreement tied to the NAICS code 541380, indicating engineering and technical services, and is specifically designated for performance at the location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, under the oversight of the ASC Supplier Oper OEM Division within the Department of Defense.
Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Labeling and Compliance SupportThe contract requires the provision of hazard communication labeling for hazardous components, ensuring full compliance with applicable federal regulations including OSHA’s HazCom standard, the Federal Insecticide, Fungicide, and Rodenticide Act, and the Federal Food, Drug, and Cosmetic Act. All labels must adhere to MIL-STD-129 specifications and be submitted prior to contract award to demonstrate readiness and adherence to military labeling requirements. The work is scoped under a subcontract for the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation, identified under NAICS code 541620 for scientific research and development services, was posted on August 2, 2026, and responses are due by August 10, 2026.
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
Chain Assembly Manufacturing and PackagingThe contract requires the manufacture, packaging, labeling, and delivery of a chain assembly to meet exact military specifications, including stringent dimensional standards and preservation requirements using the Cling/Dry method in compliance with MIL-STD-2073-1E packaging guidelines. The work must be performed to ensure the assembly retains its integrity and readiness for military use, with all packaging procedures adhering to federal defense standards for long-term storage and transport. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the location where the product must be delivered or processed. This is a subcontract opportunity under the NAICS code 332439, which pertains to other fabricated metal product manufacturing, with the solicitation issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The request for proposal was posted on August 2, 2026, and responses are due by August 10, 2026, leaving a limited window for qualified vendors to submit proposals. While no set-aside type is specified, the requirement is targeted toward suppliers capable of meeting exacting defense-grade manufacturing and packaging standards, emphasizing precision, compliance, and reliability in all phases of production and delivery.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Manufacture and Supply of Aircraft Access CoversThe contract requires the manufacture, packaging, and delivery of 600 aircraft access covers with strict adherence to military standards governing inspection, packaging, marking, and hazardous materials reporting. All deliverables must meet defined military specifications to ensure operational safety, traceability, and compliance during handling and transport. The work is classified as a subcontract and falls under NAICS code 336411, indicating involvement in aerospace product and parts manufacturing. The solicitation was posted on August 2, 2026, with a firm response deadline of August 10, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Performance is expected to support defense-related aerospace systems, though the specific location of performance is not designated. All parties must ensure full compliance with federal and military regulatory requirements throughout the production and delivery lifecycle.
Aircraft Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Export-Controlled Data Access & JCP-Certified PersonnelOnly personnel holding JCP certification are authorized to access and handle ITAR- and EAR-controlled technical data, including drawings and specifications, under this subcontract. Access to such data requires explicit approval from the DLA Controlling Authority, ensuring strict compliance with U.S. export control regulations. The contract is issued under NAICS code 541330 by the ASC SUPPLIER OPER OEM DIVISION, a division of the Department of Defense, with performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. This subcontract is specifically targeted toward firms capable of providing technical services while maintaining rigorous adherence to export control compliance protocols.
Engineering Services

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541211
New
DIBBS
Government Invoicing & WAWF DocumentationThe contract requires compliance with electronic invoicing and receiving reporting procedures through the Wide Area Workflow system, specifically mandating the use of Invoice 2in1 or Invoice Receipt and Rejection (IRR) submissions to fulfill financial and logistical reporting obligations. All parties must complete WAWF registration and adhere strictly to the Federal Acquisition Regulation clause FAR 52.232-7006, which governs the mandatory use of electronic invoicing for Department of Defense contracts. This obligation applies to all invoicing activities related to the subcontract, ensuring timely, accurate, and traceable documentation of payments and deliveries. The subcontract is issued under the agency name ASC SUPPLIER OPER OEM DIVISION within the Department of Defense, with performance taking place at NEW CUMBERLAND, PA 17070-5002. It is classified under NAICS code 541211, indicating professional, scientific, and technical services, and the solicitation remains open for response until August 10, 2026. There is no specified set-aside type, and while the point of contact is not listed, full compliance with WAWF protocols and regulatory requirements is non-negotiable for award consideration and contract execution.
Offices of Certified Public Accountants

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling & SDS ComplianceThe contract pertains to the identification, classification, and documentation of hazardous materials utilized in manufacturing processes, with a strict emphasis on compliance with OSHA regulations and the Globally Harmonized System of Classification and Labelling of Chemicals. The winner will be responsible for ensuring accurate Safety Data Sheet submission and proper hazard classification according to GHS standards, maintaining full regulatory alignment throughout the lifecycle of material usage. This work is critical for operational safety, legal compliance, and supply chain transparency within the manufacturing environment. The contract is a subcontract issued under NAICS code 541620 by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance required at a location in New Cumberland, Pennsylvania, ZIP 17070-5002. It was posted on August 2, 2026, and responses are due by August 10, 2026. There is no set-aside designation specified, and while no point of contact is listed, the official solicitation details are accessible via the provided DIBBS link. All activities under this contract must adhere to federal safety and documentation mandates, and failure to meet compliance requirements may result in contract termination or financial penalties.
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Packaging & LabelingThe contract requires full compliance with MIL-STD-129 for packaging, marking, and labeling of military shipments, ensuring all items are properly identified and prepared for logistical handling within the Department of Defense supply chain. All items must also be marked with Item Unique Identification (IUID) in accordance with MIL-STD-130 and the contractual clause DFARS 252.211-7003, which mandates the registration of unique identifiers in the DoD IUID Registry to enable asset tracking and accountability. The work is structured as a subcontract under NAICS code 493190 and is performance-based at the designated location in New Cumberland, PA, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with the contracting activity managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense.
Other Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
Gearbox Assembly Manufacturing & TestingThe contract requires the manufacture, integration, and testing of an AI gearbox assembly according to technical drawing NR 81755 16Z001, with strict adherence to AS9100 quality management standards and MIL-STD-1916 zero-defect inspection protocols. All work must be performed to ensure defect-free production, emphasizing precision, reliability, and compliance with military-grade quality requirements. The assembly must meet all specified engineering criteria and undergo comprehensive testing to validate performance under operational conditions. The opportunity is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required at the location in New Cumberland, Pennsylvania, designated by zip code 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The NAICS code 336390 identifies the procurement within the Other Transportation Equipment Manufacturing sector, indicating specialized manufacturing for defense-related systems. Interested parties must submit proposals before the deadline to be considered for award.
Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
DIBBS
Terminal, Wire Rope Supply (NSN 4030017336828)The contract requires the supply of one Terminal, Wire Rope with National Stock Number 4030017336828, fully compliant with technical specifications set by the Defense Logistics Agency, military packaging and marking standards, and all applicable DFARS and FAR regulations. The item must meet exacting quality and performance criteria to ensure operational reliability in military applications, with strict adherence to federal procurement guidelines governing documentation, testing, and delivery. The contract is structured as a subcontract and is part of a broader acquisition effort under the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, giving vendors a brief window to submit proposals. The place of performance is designated as FPO with a zip code of 96694, indicating delivery to a military postal facility, likely supporting overseas or expeditionary operations. The NAICS code 332439 identifies the industry as Other Fabricated Wire Product Manufacturing, aligning the supplier’s capabilities with precision metal component production. No set aside program is specified, meaning the opportunity is open to all eligible contractors, and all submissions must conform to federal acquisition standards without exception.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and DocumentationThis contract requires the preparation and submission of OSHA-compliant Safety Data Sheets and Material Safety Data Sheets, along with proper hazard warning labels for hazardous materials used in preservatives, coatings, or lubricants associated with specific components. All documentation must adhere strictly to current regulatory standards to ensure full compliance with occupational safety and health requirements. The contractor is responsible for maintaining ongoing regulatory adherence throughout the performance period, including updates to documentation as material formulations or regulations change. The work is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required in Norfolk, Virginia, at ZIP code 23511-2123. The North American Industry Classification System code is 541620, indicating it falls under environmental consulting services. Proposals must be submitted by August 10, 2026, following the solicitation posted on August 2, 2026, and all deliverables must meet federal compliance expectations without exception.
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details