LENS, OPHTHALMIC, COMPOU
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract pertains to the procurement of ophthalmic compound lenses regulated by the FDA under Class I, requiring compliance with registration, labeling, and GMP standards despite the absence of a 510(k) submission. All packaging and labeling must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and must conform to ASTM D3951 unless overridden by higher-priority DLA Master List of Technical and Quality Requirements. Each unit must be sealed in commercial packaging capable of preventing damage, and shipments must be routed in commercially suitable exterior containers to ensure safe, cost-effective delivery to the destination point. The item is identified by NSN 6540016457931 with a purchase request number of 7017485270, and the ordered quantity is 8 units, each designated as a PR unit. Delivery is required FOB destination within 20 days of contract award, with zero tolerance for quantity variance. All shipments must be traceable and exclude parcel post, with detailed markings including the manufacturer part number POLY-ON-72MMSM050.125 and the government-assigned tracking code W50YEF61940232. The delivery address is Fort Hood, Texas, with shipping instructions referencing DLA Packaging Requirements for Procurement and palletization standards. The contract is issued under solicitation SPE2DS-26-T-235Y, with a response deadline of July 21, 2026, and an original required delivery date of July 16, 2026, under the authority of the Department of Defense’s Medical Supply Chain.
General Info
Agency
NAICS
Place of Performance
BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
LENS,OPHTHALMIC,COM
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
Regulation 886.5844, Class I. Even though a 510(K) is not required, it is necessary to meet other requirements for marketing. These include: Registration and Listing, Labeling, or GMP’s
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE2DS-26-T-235Y
SECTION B
ALLAN BAKER, INC. 0BJC6 P/N POLY-ON-72MMSM050.125
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017485270 0001 PR 8.000
NSN/MATERIAL:6540016457931
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W50YEF
W6YR USALRCTR FT HOOD
III CORPS TACTICAL AREA AWCF SSF
BLDG 4925 SANTA FE AVE
FORT HOOD TX 76544
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W50YEF
W6YR USALRCTR FT HOOD
III CORPS TACTICAL AREA AWCF SSF
BLDG 4925 SANTA FE AVE
FORT HOOD TX 76544
US
SPE2DS-26-T-235Y
SECTION B
PR: 7017485270 PRLI: 0001 CONT’D
MARKFOR
W50YEF
W6YR USALRCTR FT HOOD
III CORPS TACTICAL AREA AWCF SSF
BLDG 4925 SANTA FE AVE
FORT HOOD TX 76544
US
M/F: (TCN) W50YEF61940232
RDD: 206
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026
SPE2DS-26-T-235Y NSN/Part Number: 6540-01-645-7931 Quantity: 8 PR Purchase Request: 7017485270QTY: 8 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
