Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LEVER, FUEL CONTROL

Active
SPE4A5-26-Q-0639Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a lever fuel control item identified by NSN 2915-00-565-7132 and part number 755116-1 from ONTIC ENGINEERING & MANUFACTURING, INC, with a quantity of four units to be delivered within 255 days after contract award. The item is designated as a critical safety item and a critical application item by the Air Force, requiring strict compliance with all associated technical and quality standards, including SAE AS9100 for higher-level quality requirements. Documentation must adhere to DLA’s Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA Packaging Requirements, including marking in accordance with MIL-STD-129, with each unit labeled with lot and serial numbers, contractor and manufacturer cage codes, and part number. Physical identification and bare item marking are required, though item unique identification is waived per customer request. The contract mandates inspection and acceptance at origin, with no variance allowed in quantity delivery. All packaging must be palletized per RP001 and shipped to the designated DLA Distribution Depot in Tinker AFB, Oklahoma. Cybersecurity requirements include CMMC Level 2 self-assessment and compliance with Covered Defense Information protocols. Measuring and test equipment must be calibrated and documented per RT001, and all supplier requests for waivers or deviations must be submitted to the DSC Contracting Officer for approval. The acquisition is governed by DLA’s authorized unit of issue and references specific quality assurance procedures including QAP-13873 and QAP-106 Rev B. Delivery is FOB origin, with freight and transportation procedures governed by DLAD Proc Notes C19 and C20. The contract solicitation number is SPE4A5-26-Q-0639, issued on July 22, 2026, with response deadline July 28, 2026, and the government’s material need date is September 6, 2027.

General Info

Four critical safety lever fuel controls delivered to Tinker AFB within 255 days, meeting AS9100, MIL-STD, and CMMC Level 2 requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-Q-0639.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Linda Chatman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEVER, FUEL CONTROL RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI). . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE)<(>,<)> CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER.
CRITICAL APPLICATION ITEM
ONTIC ENGINEERING & MANUFACTURING, INC 45934 P/N 755116-1
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 QAP-106 REVISION NR B DTD 07/09/2012 PART PIECE NUMBER:
Critical Safety Item
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-Q-0639
SECTION B
SUPPLY/SERVICE: 2915-00-565-7132 CONT'D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 2915-00-565-7132 4.000 EA $ _______________ $ ______________ LEVER,FUEL CONTROL
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 255 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:02 WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:BE OPI:M INTRMDTE CONT:EC INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7015854326 0001 N/A N/A N/A 09/06/2027

SPE4A5-26-Q-0639 NSN/Part Number: 2915-00-565-7132 Quantity: 4 EA Purchase Request: 7015854326QTY: 4 Delivery: 255 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
RING, RETAININGThe contract is for the procurement of retainer rings identified by NSN 5325-01-116-4977 and part number M2742610163D, with a quantity of 3,344 units to be delivered within 99 days under solicitation SPE4A6-26-T-09AN. All items must conform to the current revision of MIL-DTL-27426E and MIL-DTL-27426/1B standards, and any hardware manufactured after the solicitation date must meet the latest version of these standards. The product is classified as a critical application item, and compliance with tailored higher-level quality requirements is mandatory. Manufacturing and inspection must adhere to the DLA Master List of Technical and Quality Requirements, which override other standards including ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, comply with DLA Packaging Requirements for Procurement, and be palletized in accordance with RP001. All items are to be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the origin point. The delivery destination is the DLA Distribution Albany facility in Albany, Georgia, with a required ship date of March 27, 2026, and an original delivery deadline of March 14, 2027. The contract is administered by the Department of Defense’s ASC Commodities Division, and all technical, quality, and packaging specifications are governed by official DLA and DoD directives.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLICThe contract is for the procurement of 2 nonmetallic grommets with NSN 5325-01-481-1737 and part number 863-000613, issued under solicitation SPE4A7-26-T-590K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with precedence given to the DLA Master List of Technical and Quality Requirements over ASTM standards. The unit of issue is each, with a fixed price of $2.00 per unit, totaling $4.00. Packaging must follow RP001 DLA packaging requirements and be palletized accordingly. Shipments must be sent via traceable freight, explicitly prohibiting parcel post, and delivered to the specified military logistics address at March ARB, CA. The required delivery date is July 16, 2026, and the contract references applicable technical and quality standards identified by R or I numbers from the DLA Master List. The responsible point of contact is Naron Sanderlin, with additional government-use codes and identifiers provided for tracking and disposition.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract is for the procurement of 63 units of a spacer sleeve identified by NSN 5365-00-061-8248 and part number NAS43HT6-24, manufactured in accordance with NAS43 Revision 12 dated 11/30/2012. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Inspection and acceptance are to occur at origin, with sampling conducted under MIL-STD-1916 or an equivalent zero-based sampling plan, and zero non-conformances required unless otherwise specified. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization following those same standards. The item is designated as a critical application item and must be marked and labeled per RQ017. Delivery is FOB origin with no variance permitted in quantity, and the required delivery date is 107 days from contract award, with an original deadline of February 17, 2027 and a needed ship date of November 15, 2026. The delivery address is DLA Distribution Jacksonville, and all transportation instructions must follow DLAD Proc Notes C19 and C20. The contract number is SPE4A7-26-T-590S, issued as a federal solicitation under NAICS code 332510, with procurement initiated through Purchase Request 7016845196.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, WEAThis contract, identified as SPE4A6-26-R-XB58, is a Firm-Fixed-Price solicitation issued by the Defense Logistics Agency Aviation, Commodities Division under the Department of Defense, targeting a total small business set-aside with a NAICS code of 332510 for resilient mount supplies. The contract has an estimated aggregate ceiling of $350,000 over a five-year period, with variable delivery order quantities per year ranging from a minimum of 37 to a maximum of 224 units, though no unit pricing has been established and offers are solicited to fill these blanks. Performance is required under F.O.B. Origin terms, with delivery expected within 119 days after receipt of order, and inspections are conducted at the contractor’s facility prior to shipment, adhering to FAR 52.246-2 and 52.246-11 for quality assurance with final acceptance authority resting with the government. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130, including mandatory 2D Data Matrix barcoding, adherence to RP001 DLA packaging guidelines, and strict prohibition of mercury compounds under IP056, while items designated as TYPE I with CODE W must maintain a non-extendable 120-month shelf life through designated preservation methods. The contract incorporates multiple FAR and DFARS clauses mandating compliance with Buy American requirements, prohibitions on hexavalent chromium and fluorinated aqueous film-forming foam, restrictions on toxic materials, and a preference for U.S.-flagged commercial vessels in transportation. Subcontracting obligations require flow-down of key clauses, with full text of the prohibition on foreign-flag vessels and transportation representation requirements binding upon the prime contractor and any subcontractors exceeding the simplified acquisition threshold. Deviations are authorized and annotated in specific clauses, including a unique deviation for the small business set-aside notice and subcontracts for commercial products. Invoicing must occur exclusively through WAWF with no alternatives permitted, and payment processing is governed by specific DoDAAC identification requirements. Solicitation responses require full representation of entity size status and UEI/CAGE codes through SAM, affirmative disclosures regarding prohibited telecommunications, forced labor, or controlled substances, and certification of compliance with cybersecurity and safeguarding requirements under DFARS 252.204-7012
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
CUSHIONING MATERIALThe contract specifies the procurement of cushioning material identified by part number 24760 and NSN 8145-01-603-9516, supplied by Knight's Armament Company, with a total quantity of 13 units to be delivered FOB origin within 56 days, targeting a required delivery date of October 26, 2026. Each unit is priced at $13.00, with no variance allowed in quantity, and inspection and acceptance are to occur at the destination. The material must be packaged in strict compliance with ASTM D3951, subject to precedence of the DLA Master List of Technical and Quality Requirements, and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and all packaging must be marked and labeled according to the contract. The goods are to be delivered to the designated receiving warehouse in Tracy, California, with shipping instructions governed by DLAD Proc Note C19 and C20. The solicitation, issued under contract number SPE8ED-26-T-1165, falls under NAICS code 332510 and was posted July 22, 2026, with responses due by August 3, 2026. This procurement involves covered defense information and requires strict control over government identification removal from non-accepted supplies during handling.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SLIDE, DRAWER, EXTENSThe contract pertains to the procurement of one slide drawer extension unit, identified by NSN 5340-01-525-8105 and part number 1506206-R, under solicitation SPE7L1-26-T-862M. Delivery is required within 20 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including specific packaging methods, materials, and unit containment procedures, with palletization governed by DLA packaging requirements. No mercury or mercury-containing compounds may be intentionally incorporated or come into direct contact with the hardware unless exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or chemically specified reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract reference incorporates technical and quality requirements from the DLA Master List, with controls tied to solicitation and award dates depending on acquisition type. The delivery destination is the USS RAFAEL PERALTA DDG 115, with shipping instructions and transportation protocols detailed in DLAD procedural notes. All commercial items must adhere to the DoD unit of issue standards, and the contract requires strict compliance with all specified packaging, marking, and regulatory conditions for government acceptance.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CASE, TRANSIT, AMALThe contract pertains to the procurement of 40 transit cases designated as CASE, TRANSIT, AMAL, with part number 332100-FR and NSN 8145-01-563-8608, manufactured by Becklin Holdings, Inc. DBA ECS Case. Each case measures 33L x 25W x 16H inches, weighs 39 pounds, is colored green with black hardware, and includes special features such as stackability, fire retardancy, composite resin construction, no cushion, an air valve, and non-hinged design. The items must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including marking and labeling per MIL-STD-129. Packaging and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Delivery is FOB origin with a 140-day delivery window, no variance in quantity allowed, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE8ED-26-T-1167, with a total set-aside for small businesses, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The unit of issue is each, with a total contract value based on the unit price for 40 units, and the original required delivery date is February 19, 2027.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BUCKLE, RATCHETThe contract pertains to the procurement of a single ratchet buckle, identified by NSN 3020-01-293-5153 and part number FE7739-20 from Kinedyne LLC, with a required delivery of one unit within 20 days of award. Delivery is FOB origin and inspection and acceptance occur at the destination, with no tolerance for quantity variance. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 must be followed, including compliance with DLA’s packaging directives and prohibitions against mercury or mercury compounds except in specifically exempted functional components like batteries or sensors approved by NAVSEA, which must also include secondary containment as mandated by NAVSEA 5100-003D. The item is classified as a critical application component for naval Trident systems, requiring adherence to all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. Shipping must use the fastest traceable method, avoiding parcel post, and must be directed to the receiving officer at the Trident Refit Facility in Kings Bay, Georgia. The solicitation number is SPE7L1-26-T-861T, with a response deadline of August 3, 2026, and the original required delivery date is July 20, 2026. All contractual obligations are governed by the DLA’s authorized unit of issue and federal acquisition regulations, under the oversight of the Department of Defense’s Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
INCLINOMETER, INDUSTThe contract is for the procurement of two industrial inclinometers, identified by NSN 5340-01-629-1586 and part number 20035A28, under solicitation SPE7L1-26-T-862G. The requirement is for delivery of both units within twenty days of contract award to the U.S. Army SSA SUSBDE APS 405th AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with FOB origin terms and zero tolerance for quantity variance. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, superseding general industry standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with hazardous material exceptions governed by TQ requirement IP025. The unit of issue is each, and the total contract value for two units is based on a fixed price with no variation allowed. The goods must be marked, labeled, and palletized according to DLA specifications, with specific freight and transportation procedures referenced via DLAD Proc Notes C19 and C20. Delivery must occur no later than July 20, 2026, and the contract is managed under the Land Supply Chain of the Department of Defense, with Kristina Derry as the primary point of contact. The solicitation is open to all eligible suppliers under NAICS code 332510, with responses due by August 3, 2026. Government identification on non-accepted supplies must be removed per RQ011, and all packaging data must reflect the QUP of 1 unit per pack. The contract includes mandatory compliance with DLA’s electronic procurement standards and documentation referenced through official DLA and DoD portals.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, SPECIALThe contract pertains to the procurement of two specialized springs identified by NSN 5360-00-404-5062, with a required delivery within five days of award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. The applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment specifically updates the requirements, in which case the amendment date governs. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for authorized functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. The solicitation, issued under number SPE7L1-26-T-862Q, was posted on July 22, 2026, with responses due by August 3, 2026, and falls under NAICS code 332510. The contracting activity is managed by the Department of Defense’s Land Supply Chain, with performance to be delivered to FPO, zip code 96632. Primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACE, INFLATABLE BOThe contract mandates the procurement of six inflatable boat braces with NSN 2040015006574 under solicitation SPE7M4-26-T-273P, requiring delivery within 20 days to Fort Meade, Maryland, FOB origin, with no variance allowed in quantity. All items must comply with ASTM D3951 packaging standards unless superseded by higher-priority technical or quality requirements from the DLA Master List of Technical and Quality Requirements, and all packaging must be marked and labeled per MIL-STD-129. The Unit of Issue is each, and palletization must follow DLA Packaging Requirement RP001. Shipment must be sent by the fastest traceable method, excluding parcel post, to the specified Fort Meade delivery point with a required delivery date of July 20, 2026. Packaging must include the designated Unit of Issue and Quantity per Unit Pack as specified, and the supplier must remove any government identification from non-accepted supplies. The contract is managed by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly, and the solicitation response deadline is August 3, 2026.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET AND SEAL SETThe contract pertains to the procurement of a GASKET AND SEAL SET with NSN 5330-01-308-3522, designated as a Navy Critical Safety Item, requiring strict adherence to technical, quality, and security protocols. Compliance is governed by referenced DLA Master List requirements identified by R and I numbers, with applicable revisions tied to either the solicitation or award date depending on acquisition size. The supplier must meet stringent documentation mandates including a Source Approval Request, Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and adherence to DLA packaging standards. Inspection and acceptance occur at origin, with non-accepted items requiring removal of government identification, and all items must be physically marked per RQ017, including contractor and manufacturer CAGE codes, part number, and lot or serial number, though Item Unique Identification is not required. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defects permitted unless otherwise specified, and measuring equipment must comply with RT001 standards. All technical data is controlled under ITAR or EAR, prohibiting export without authorization and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA approval. DFARS 252.225-7048 applies to all technical data handling. Packaging and marking must conform to MIL-STD-129, and any waivers or deviations require formal approval from the DSC Contracting Officer. Delivery is due within 333 days after contract award.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PIThe contract is for the procurement of three transducers, motional PI, identified by NSN 6695-01-737-0929, under solicitation SPE4A5-26-Q-0640, with a response deadline of August 5, 2026, and a delivery requirement of 136 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contractor must comply with DLA packaging standards, configuration change management procedures, and documentation requirements for source approval requests. Technical data associated with the transducer is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons—even within the United States—is strictly prohibited without prior authorization from the Department of State or Department of Commerce; DFARS 252.225-7048 governs this restriction. Access to this controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have received formal approval from DLA. Additionally, all supplies must be properly marked per physical identification requirements, and government identification must be removed from non-accepted items. The contract falls under a federal acquisition with performance location in Tracy, California, and primary point of contact is Hannah Song of the Department of Defense’s ASC Supplier Operations OEM Division.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332111
New
DIBBS
SHAFT, TURBINE, AIRCRAFTThe contract pertains to the procurement of two aircraft gas turbine engine turbine shafts, identified by NSN 2840-00-837-2071 and part number 3011095, manufactured by Pratt & Whitney Canada Corp and sourced through the Canadian Commercial Corporation. This is a Critical Safety Item designated by the Air Force, subject to stringent quality and cybersecurity controls including CMMC Level 2 self-assessment and compliance with SAE AS9100 for non-tailored higher-level quality requirements. Manufacturing must follow a forging process, requiring specialized tooling, and all supplies must adhere to MIL-STD-129 marking standards with lot and serial numbers, contractor and manufacturer cage codes, and part numbers included on each unit pack. Inspection and acceptance occur at origin under zero-defect sampling principles per MIL-STD-1916 or comparable zero-based plans, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Tooling and sourcing inquiries must be directed to designated DLA supply chain teams. The item must be packaged per MIL-STD-2073-1E with specified preservation methods and materials, and palletized according to DLA packaging requirements. Delivery is due in 88 days after award under a firm fixed price structure with no tolerance for quantity variance. All waivers or deviations require formal approval from the DSC Contracting Officer, and the item is subject to Covered Defense Information protocols and government identification removal procedures for non-accepted items.
Iron and Steel Forging

POSTED

about 4 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MOUNTThe contract specifies the procurement of a single unit of a BEZEL, INSTRUMENT MOUNTING with NSN 6695-01-122-7941 and part number AM11085, manufactured by ONTIC ENGINEERING & MANUFACTURING UK. The item is classified as a critical application component and must comply with a range of technical, quality, and packaging standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging and palletization must conform to DLA’s procurement requirements, and the item is subject to zero tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery required FOB origin within 171 days of contract award, targeting January 18, 2027, as the needed ship date. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier must hold a CMMC Level 2 self-assessment, and documentation for source approval is required. The item is not required to include Unique Item Identification per DFARS 252.211-7003(c)(1)(i). All technical and quality requirements referenced are governed by the DLA Master List, with revisions tied to the solicitation issue or award date. Delivery is directed to DLA Distribution San Diego, and transportation protocols must align with DLA procedural notes C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, SEALThis contract specifies the procurement of a retainer and seal with part number 411T1141-18B and NSN 5330016527881, requiring delivery of one unit within 20 days FOB origin to Fort Hood, Texas. The item is classified as a critical application component under Boeing’s specification and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Directive Procurement Note C03, and FAA bare item marking standards. The contractor must retain traceability documentation and meet specific packaging and marking mandates, including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 to protect against UV degradation. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are to be verified at designated levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. A Certificate of Airworthiness and Conformance is mandatory for FAA-certified parts per RQ019 and Proc Note L32. Delivery must occur via traceable freight methods, exclude parcel post, and align with the required delivery date of July 10, 2026. The contract enforces a zero variance in quantity and requires inspection and acceptance at destination.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BALL AND SEAT ASSEMThe contract pertains to the procurement of three BALL AND SEAT ASSEM units, identified by NSN 1630-01-036-6507, under solicitation SPE4A5-26-T-305D, with a response deadline of July 30, 2026, and a delivery requirement of 170 days after award. The item is not subject to Item Unique Identification per the Service customer’s request, and no shelf life restrictions apply. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract incorporates DLA packaging standards, requirements for the removal of government identification from non-accepted supplies, and physical marking of bare items. Documentation for source approval requests is required, and measuring and test equipment must meet adequate data standards. The place of performance is Tracy, California, with Courtney Minor of the ASC Supplier Oper OEM Division listed as the primary point of contact. The NAICS code 336413 indicates this is for aircraft and spacecraft component manufacturing, and the contracting agency is the Department of Defense.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
PACKING, PREFORMEDThis contract pertains to the procurement of preformed packing items identified by NSN 5330-01-478-2010, with a quantity of 48 units to be delivered within 170 days from the contract award, FOB origin. The packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with all components sealed in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, and stock shipments. Packaging and palletization must comply with DLA’s specific requirements, including the use of GB wrap, JB cushioning, and designated intermediate containers. The item is classified as a critical application under Hamilton Sundstrand Corporation part numbers 772746, and unit identification is not required per Service customer request, with DFARS 252.211-7003(c)(1)(i) applicable. All technical and quality mandates referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Sampling protocols require conformity to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes must be verified at specified levels: VII for critical, IV for major, and II for minor, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals or variance requests, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Measuring and test equipment must meet RT001 standards, and hazardous materials packaging follows IP025 guidelines. The delivery destination is DLA Distribution San Diego, with a required ship date of January 17, 2027 and original delivery deadline of September 14, 2027. Pricing and contract line item details remain fixed with zero variance tolerance, and all documentation must align with DLA’s procurement and logistics protocols, including transportation references to DLAD Proc Notes C19 and C20.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTINGThis contract pertains to the procurement of a fitting identified by NSN 1560-01-256-2172 and part number 209-064-224-101, manufactured via a metal casting process requiring specialized tooling. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1, enforcing zero non-conformances unless otherwise stated. Attributes are assigned specific verification levels or AQLs, and all marking and packaging must adhere to MIL-STD-129 and MIL-STD-2073-1E, with palletization following DLA packaging requirements. The item is to be delivered FOB origin within 20 days, with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. The contractor is required to meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment standards and must submit documentation for source approval as outlined in RC001. The delivery destination is the Taiwan Army Zuo-Ying Ammunition Sub facility, with freight forwarding instructions referencing DLAD procedural notes. The purchase request number is 7017584377 with a total price of $144.00 for 12 units at $12.00 each, and the contract is issued under solicitation SPE4A5-26-T-304U with an original delivery deadline of July 24, 2026. The supplier must utilize the designated unit of issue and comply with all government-specific identifiers and data codes, including the manufacturer's code PTWZ5V62012654 and project code TP 2. Direct contact for sourcing, tooling, or material assistance is provided through DLA’s Aviation or Land and Maritime Supply Chain teams.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, FIBE
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAINING
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details