Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LEVER, MANUAL CONTRO

Active
SPE7L3-26-T-223BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7L3-26-T-223B, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of one manual control lever, part number 3040-01-719-0188. The contract requires delivery within 20 days after receipt of order and is subject to full and open competition. Performance is centered in Mechanicsburg, Pennsylvania, with a response deadline of September 14, 2026. The agreement incorporates strict technical and quality requirements from the DLA Master List, including specific packaging standards and the prohibition of Class I ozone-depleting chemicals. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 and Covered Defense Information protocols is mandatory. Additionally, the item is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle technical data.

General Info

DoD procurement for one manual control lever due September 14, 2026, in Pennsylvania.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

5450 CARLISLE PK BLDG 209N, MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-223B Request for Quotations

PDF•20 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
LEE MILLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEVER,MANUAL CONTRO
LEVER<(>,<)> MANUAL CONTROL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
ALL PARAGRAPHS UNDER 8.3 (DESIGN AND DEVELOPMENT OF PRODUCTS AND SERVICES) DO NOT APPLY RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SPE7L3-26-T-223B
SECTION B
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-01-719-0188 Quantity: 1 EA Purchase Request: 7017744386QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE4A5-26-T-404D
This contract is for the procurement of 14 shouldered shafts, identified by NSN 3040-01-154-2688 and Honeywell part number 2666968. The item is designated as a critical application item and must adhere to specific technical and quality requirements, including CMMC Level 2 self-assessment and strict measuring and test equipment standards. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sampling plans. Delivery is required within 85 days, with a need ship date of April 17, 2026, and a final required delivery date of May 22, 2026. Shipping is FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract specifies no quantity variance and requires the removal of government identification from any non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
SHAFT ASSEMBLY, SHOU
Solicitation # SPE7L1-26-T-06S9
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-06S9, is for the procurement of one shouldered shaft assembly, identified by NSN 3040-01-682-6020. The contract requires delivery within 20 days after receipt of order. Primary point of contact for this acquisition is Kristina Derry. The contract is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the technical data for this item is subject to ITAR or EAR export controls. Access to this data is restricted to approved DLA contractors with a valid US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, OIL PUMP BLOW
Solicitation # SPE7L1-26-T-06N4
This contract is for the procurement of 15 units of an oil pump blow shaft, identified by NSN 3040009501872 and part number 590A2 from Steward Machine Co Inc. The order is designated as a critical application item and must adhere to specific technical and quality requirements outlined in the DLA Master List. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Delivery is required within 73 days, with a need ship date of April 14, 2025, and an original required delivery date of November 24, 2025. The items are to be shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements. Inspection and acceptance will take place at the destination.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M1-26-U-5326
This solicitation, identified as SPE7M1-26-U-5326, is issued by the Department of Defense Maritime Supply Chain for the procurement of 52 sensitive switches under NSN 5930-01-011-4233. The requirement is established as a total small business set-aside under NAICS code 333613. The contract is structured as a one-year indefinite delivery/indefinite quantity arrangement with a contract maximum value of 350,000 dollars, a minimum order quantity of 26 units, and a guaranteed minimum of 7 units. Delivery is required within 97 days after the order is placed. The procurement is subject to specific DLA packaging requirements and technical quality standards outlined in the DLA Master List. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional mercury in specific instruments or weapon systems as specified by NAVSEA. Additionally, any alternate offerors must provide a complete data package for both the approved and alternate parts. The response deadline for this solicitation is September 2, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333613
New
DIBBS
LEVER, REMOTE CONTRO
Solicitation # SPE7L3-26-T-223J
This contract is for the procurement of 68 units of a remote control lever, identified by NSN 3040-01-323-9839 and part number 3825093-4 from Marvin Engineering Co, Inc. The item is designated as a critical application component used on the Advance Medium Range Air-to-Air Missile for F/A-18 aircraft. Manufacturing requires a metal casting process and specific tooling, with sourcing support available through DLA Aviation and Land and Maritime supply chains. The agreement specifies a delivery timeframe of 49 days after order, with a required delivery date of April 7, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements, while technical and quality standards are governed by the DLA Master List.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE4A6-26-T-20PY
This contract is for the procurement of five gear clusters, identified by NSN 3020-01-497-1977 and part number 528037 from Honeywell International Inc. The agreement is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-20PY. Delivery is required within 243 days, with a need ship date of April 28, 2027, and a final required delivery date of August 27, 2027. The items are to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and specific DLA packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. There is a zero percent quantity variance allowed for this order.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-222B
This solicitation is for the procurement of one connecting link for a rig, identified by NSN 3040-01-484-2001. The contract is issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with a required delivery timeframe of 20 days after receipt of order. A notable exception to the standard requirements is that the paint finish will be applied by the requestioner rather than the supplier. The agreement is subject to strict regulatory compliance, including DLA packaging requirements and CMMC Level 2 certification. Because the item contains technical data subject to ITAR or EAR export controls, the contractor must have an approved US/Canada Joint Certification Program certification and have completed specific DOD export-controlled technical data training. Additionally, the contract mandates adherence to configuration change management and the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7LX-26-U-9908
This solicitation, identified as SPE7LX-26-U-9908, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of a control cam, part number 23502089, with NSN 3040016117904. The requirement is for an estimated quantity of 210 units, with a delivery timeframe of 127 days. This is a total small business set-aside under NAICS code 333613, structured as a one-year unilateral indefinite delivery contract below the Simplified Acquisition Threshold, with a contract maximum value of 350,000 dollars. The contract specifies that delivery is FOB Origin, while both inspection and acceptance will occur at the destination. All supplies must adhere to strict technical and quality requirements, including DLA packaging requirements for procurement and the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. The primary point of contact for this acquisition is Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, SPUR
Solicitation # SPE7L1-26-T-824A
The contract pertains to the procurement of a GEARSHAFT, SPUR with NSN 3040-00-192-2159 and part number 291366, supplied by SARGENT AEROSPACE & DEFENSE, LLC for use on the GALAXY C-5 aircraft, classified as a critical application item. A total quantity of 22 units is required, each priced at $22.00, for a total contract value of $484.00, to be delivered FOB origin within 168 days of contract award, with zero variance allowed in quantity. All items must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, while adhering to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, and all units must be marked with the correct Unit of Issue and Quantity per Unit Pack as specified. Delivery is directed to DLA Distribution Depot Hill at Hill AFB, Utah, with the parcel post and freight shipping addresses clearly defined. Inspection and acceptance occur at the destination point. The original required delivery date is June 20, 2028, with a need ship date of January 5, 2027. The solicitation, identified as SPE7L1-26-T-824A, was posted on July 9, 2026, with a response deadline of July 20, 2026, under NAICS code 333613 for gear and gear box manufacturing. The contract is issued by the Department of Defense, Land Supply Chain, with Meghan Ruehle as the primary point of contact. The unit of issue is the each (EA), and the DoD authorized unit of issue system applies, with reference to the official DLA unit of issue lookup tool. All logistics and transportation instructions must conform to DLAD Proc Notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-06P1
This contract is a solicitation for the procurement of five spur gears, identified by NSN 3020002467149 and part number 532169-5 from Ontic Engineering and Manufacturing, Inc. The order is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-06P1. Key delivery terms include a delivery window of 155 days, with a need ship date of September 15, 2026, and an original required delivery date of March 18, 2027. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The agreement mandates strict adherence to several technical and regulatory standards, including DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Additionally, the contractor must comply with Covered Defense Information regulations and the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L3-26-T-223N
This contract is for the procurement of one spur gear, identified by NSN 3020-01-044-6256, under solicitation SPE7L3-26-T-223N. The item must be manufactured according to Technical Data Package Revision A and basic drawing 53711 RE-C102174. Production may involve forging or metal casting processes, and the contractor is directed to contact specific DLA assistance teams for tooling and material sourcing. Delivery is required within 20 days after order, with a required delivery date of June 15, 2026, shipping FOB Origin to the NAVSEALOGCEN facility in Mechanicsburg, Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129. Environmental restrictions are in place, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Quality controls include tailored higher-level requirements and configuration change management. All shipments must be sent via traceable means, and parcel post is explicitly prohibited.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-222C
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 20 straight shafts under part number 0001S00000053. The contract requires delivery within 140 days after receipt of order and falls under NAICS code 333613. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to specific phosphate coating supplier certifications and DLA packaging standards. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-controlled technical data training to access necessary technical information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332911
New
DIBBS
Phosphor Bronze Valve Diaphragm Supplier
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
Nonmetallic Special Shaped Section Seal Supplier
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L3-26-T-223U
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of four O-rings under part number 5331-01-481-7092. The contract requires delivery within five days after receipt of the order. All supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The agreement is subject to several technical and quality requirements, including DLA packaging standards, configuration change management, and inspection and acceptance at the origin. Additionally, the components must adhere to Qualified Products Lists or Qualified Manufacturers Lists. Interested parties must respond by September 14, 2026, and can direct inquiries to the primary point of contact, Lee Miller.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-223Q
This contract is for the procurement of one plain encased seal, identified by NSN 5330992807353 and associated with Bosch Rexroth and KNDS Defence UK part numbers. The item is designated as a critical application item and must be delivered within 10 days. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the US Army SSA SUSBDE APS 405th AFSB in Zutendaal, Belgium. Strict packaging and environmental requirements apply, including the use of medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to prevent UV deterioration. The contract prohibits the use of Class I ozone depleting chemicals and mandates compliance with MIL-STD-130N for identification marking and MIL-STD-129 for general marking. All shipments must adhere to DLA packaging requirements and specific handling instructions, including a do not bend warning.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336999
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L3-26-T-223R
This contract, identified as SPE7L3-26-T-223R, is a solicitation from the Department of Defense Land Supplier Operations Vehicle Support for the procurement of five filler opening caps. The required items are specified as Ford Motor Company part number EC3Z6766A, corresponding to NSN 2590-01-632-2955. The delivery is required within 20 days after the order, with a final required delivery date of July 28, 2026. The shipment is destined for the Naval Expeditionary Logistics Support Group in Williamsburg, Virginia. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Terms specify that delivery and acceptance will occur at the destination, with shipping handled via the fastest traceable means, explicitly prohibiting the use of parcel post.
All Other Transportation Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7L3-26-T-223L
This contract is for the procurement of two safety relief valves, identified by NSN 4820015722228. The items are critical application components associated with part numbers from Circor Aerospace, Inc. and Rolls-Royce Marine North America Inc. Delivery is required within 69 days of order, with a final need date of November 23, 2026. The goods are to be delivered FOB Origin and shipped to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. A significant environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Inspection and acceptance will take place at the destination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-222D
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 600 plain encased seals under NSN 5330-00-492-1776. The contract is open for full and open competition and identifies the product as a commercial item. Delivery is required within 282 days after the order is placed, with the place of performance located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-130N for the identification marking of U.S. military property. A critical requirement is that all supplied items must be completely free of asbestos. Any alternative materials must be approved according to specific contractual clauses. The response deadline for this solicitation is September 14, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
ROD, DOOR CHECK, VEHICUL
Solicitation # SPE7L3-26-T-222L
This contract, solicitation number SPE7L3-26-T-222L, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of two vehicular door check rods, identified by NSN 2510-01-611-6876 and part number 106A0351-1 from Mil-Mar Century Corporation. The requirement specifies a delivery timeframe of 114 days after order, with a required delivery date of January 7, 2027. Delivery is set as FOB Origin, while both inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and RP001 packaging requirements. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the supplied items. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026, and falls under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL END
Solicitation # SPE7L3-26-T-1241
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 128 units of Seal End components under NSN 5330-01-284-2423. The contract requires delivery within 168 days after receipt of order and mandates strict adherence to DLA packaging and technical requirements, including the prohibition of asbestos as defined in FED-STD-313. Quality assurance is governed by specific sampling methods, requiring compliance with MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. The agreement specifies verification levels for critical, major, and minor attributes and requires the removal of government identification from any non-accepted supplies. Documentation for Source Approval Requests must be provided in accordance with established requirements.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-222Q
This solicitation from the Department of Defense Land Supplier Operations Vehicle Support is for the procurement of 32 gaskets under part number 5330-01-484-8996. The contract requires delivery within 111 days after receipt of order and is categorized under NAICS code 339991. Performance is to take place in Tracy, California. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
SEAL, NONMETALLIC CH
Solicitation # SPE7L3-26-T-222R
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of six nonmetallic channel seals under national stock number 5330-00-442-3823. The contract is designated as a total small business set-aside and requires delivery within 187 days after the order. Performance will take place at Robins Air Force Base. The supplier must adhere to strict technical and quality standards, including CMMC Level 2 certification for third-party assessment organizations. Key requirements include compliance with MIL-STD-130N for identification marking and specific packaging standards using waterproof, greaseproof, opaque bags to prevent UV deterioration. Additionally, all supplied items must be completely free of asbestos, and any alternative materials must be approved according to specified contractual clauses.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-T-221X
This solicitation is for the procurement of one replacement mechanical seal parts kit, identified by NSN 5330-01-530-9221, for the Department of Defense Land Supplier Operations Vehicle Support. The contract requires delivery within five days after receipt of order to the performance location in Jacksonville. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Specifically, the items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Additionally, all supplied materials must be completely free of asbestos, with any alternative materials requiring formal approval.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details