Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

LI/SOC/FBW Procurement Requirement

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The LI/SOC/FBW Procurement Requirement is a forecasted contract issued by the Department of the Navy through Navsup WSS. The procurement involves the acquisition of 466 special studs. This requirement is currently categorized as a forecast, indicating that the agency is planning for future procurement activities rather than issuing an immediate solicitation for bids. The place of performance for this contract is designated as the vendor's facility, placing the responsibility for production and fulfillment on the selected contractor. While specific solicitation numbers and set-aside details are not currently listed, the procurement is managed under the Navy's organizational structure. Interested parties can monitor updates through the official Department of the Navy small business resources link provided for procurement planning.

General Info

Navy forecasted procurement for 466 special studs to be performed at vendor facility.

Agency

Department Of The Navy → Navsup WssView Agency

NAICS

339994 - Broom, Brush, and Mop ManufacturingView NAICS

Place of Performance

VENDOR'S FACILITY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 2

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Wss

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Navy → Navsup Wss

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement of 466 EA of STUD,SPECIAL

Similar Contracts

Same NAICS industry code

COL LAR, PIN-RIVET

Solicitation # SPE4A6-26-T-21JM

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for the procurement of COL LAR, PIN-RIVET, identified by NSN/Part Number 5320-00-004-4035. This federal procurement request, numbered 7015252026, seeks to acquire a total quantity of 5,868 units. The solicitation is officially tracked under number SPE4A6-26-T-21JM and was posted on August 23, 2026. Interested parties must submit their responses by the established deadline of August 28, 2026, at 17:00:00 UTC. This solicitation is managed through the Defense Logistics Agency's procurement systems to support departmental requirements. Detailed information regarding the submission process and specific requirements can be accessed through the official DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

BRUSH, CLEANING, BRON

Solicitation # SPE2DS-26-T-361V

This federal solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of a single cleaning brush, identified by NSN 6515-01-462-0643. The procurement is tracked under purchase request 7017974741 and solicitation number SPE2DS-26-T-361V. This requirement is categorized as a federal solicitation intended to fulfill specific logistical needs within the defense supply chain. Interested parties must adhere to the established timeline, as the solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Potential vendors can access further details and submit documentation through the official DLA Internet Bid Board System. No specific set-aside designations or NAICS codes are listed in the current contract data, indicating a standard solicitation process for this specialized cleaning component.

Defense Logistics Agency

POSTED

DEADLINE

BRUSH, CLEANING, TOOL

Solicitation # SPE8E5-26-T-4055

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of three cleaning tool brushes identified by NSN 7920-12-399-7384. The procurement is categorized as a federal solicitation under the identification number SPE8E5-26-T-4055. The solicitation was posted on August 23, 2026, with a formal response deadline established for September 3, 2026. Interested parties must submit their responses through the designated procurement portal to be considered for this requirement.

Defense Logistics Agency

POSTED

DEADLINE

BRUSH-SPONGE, SURGIC

Solicitation # SPE2DH-26-T-6197

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of a single surgical brush-sponge identified by NSN 6530-01-519-5786. The procurement is categorized under solicitation number SPE2DH-26-T-6197 and is managed as a federal requirement. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. No specific set-aside designations or NAICS codes were provided in the initial contract data.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3531

This contract, solicitation number SPE8E9-26-T-3531, is for the procurement of 2,000 synthetic filament paint brushes, specifically Type II, Grade AA, size 4 (102 mm). The brushes must adhere to technical specifications outlined in CID A-A-3192A and meet strict quality and packaging standards, including MIL-STD-129R for marking and MIL-STD-2073-1E for packaging. Approved manufacturers for these items include Muralo Company, Inc., Spectrum Paint Applicator Corp, and Delaware Paint Company, Ltd. The delivery is scheduled for 106 days after award, with a required need date of December 16, 2026, and an original required delivery date of January 15, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania. Inspection and acceptance will both occur at the destination. The contract is managed by the Department of Defense under the Construction and Equipment MRO Service I agency, and technical requirements are governed by the DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE7M1-26-Q-1378

This contract is for the procurement of 11 swivel casters, identified as commercial off the shelf items with part number 916-AL-1 from Columbus Jack Corporation. The agreement is established as a firm fixed price contract with a delivery timeline of 346 days after order. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements for procurement. A key environmental restriction prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the items. Inspection and acceptance will take place at the destination, with shipping handled as FOB origin.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CLIP, HEADBAND HELME

Solicitation # SPE1C1-26-Q-0410

Solicitation SPE1C1-26-Q-0410 is a Firm Fixed Price request for the manufacture and delivery of 264 Team Wendy headband helmet clips, part number 80-CAK-BP, under NSN 8470-01-729-3458. The requirement is split across four delivery locations, including Marine Aviation Logistics Squadron 26 in Jacksonville, NC, and the USS George Washington and USS George H.W. Bush. Delivery is required within 100 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to high-level quality standards, specifically ANSI/ISO/ASQ Q9001-2015 or an equivalent, and maintain supply chain traceability documentation. Packaging and marking must comply with MIL-STD-129, MIL-STD-147, and MIL-STD-2073-1E, with palletization following DLA requirement RP001. Administration is handled through the DLA Troop Support C and T Supply Chain, requiring electronic invoicing via the VIM-ASAP and WAWF systems. This is not a small business set-aside, and the solicitation incorporates various FAR and DFARS clauses regarding security prohibitions, cyber incident reporting, and defense priorities.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3962

This contract is a solicitation from the Defense Logistics Agency for the procurement of cleaning cloths, identified by NSN 7920-01-614-3522 and part number 599306. The requirement is for two boxes, with each box containing 100 units. Delivery is required within 20 days after receipt of order, with a required delivery date of August 13, 2026. The items are to be delivered FOB Origin and will be inspected and accepted at the destination. The contract specifies strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. A critical shelf life requirement of 12 months applies to these items, designated as Type 2 Code 4. Shipping must be conducted via traceable means to the designated facility at Fort Buchanan, and all government identification must be removed from any non-accepted supplies.

Defense Logistics Agency

POSTED

DEADLINE

in about 10 hours

ENHANCED PATROL RIFLE PACKAGES

Solicitation # FIN-0803

The Town of Plainfield, Connecticut, is soliciting sealed proposals from qualified vendors to supply twenty-five complete Enhanced Patrol Rifle Packages for its Police Department, with each package containing a Colt Enhanced Patrol Rifle II PRO with an 11.5-inch barrel, an Aimpoint PRO optic, a Magpul MS1 sling, GrovTec sling swivels, a Streamlight ProTac Rail Mount 1 light, a Savior Equipment American Classic Double Rifle Bag, and all necessary mounts, hardware, and batteries. All components must be professionally installed by a certified armorer, fully inspected for safety and function, and delivered in service-ready condition with proper documentation including serial numbers, armorer certifications, and completed National Firearms Act transfer paperwork. Proposals must be submitted in sealed envelopes to the Finance Department at Plainfield Town Hall no later than 12:00 P.M. on August 27, 2026, and will be publicly opened at that time; proposals received after the deadline will be returned unopened and all submitted proposals must remain valid for sixty days following submission. The award will be made using a trade-off methodology, weighing cost competitiveness at 55 percent, contractor experience and qualifications at 25 percent, ability to meet schedule at 10 percent, references and past performance at 5 percent, and completeness of proposal at 5 percent, with no requirement to select the lowest-priced bid. Each rifle package must be packaged in the specified Savior Equipment double bag, clearly labeled as approved by the Plainfield Police Department, and accompanied by a detailed itemized packing list and firearm identification list. All items must be new, unused, factory-original, and delivered to the Plainfield Police Department at 210 Norwich Road for inspection and acceptance, which will occur within ten business days of delivery; delivery does not constitute acceptance, and the contractor retains responsibility for the condition of the equipment until formal acceptance. The Town requires full compliance with MIL-STD-1913 for Picatinny rail mounting, manufacturer specifications, and all federal, state, and local firearms laws, with no substitutions permitted unless authorized in writing. The contractor must be registered with the Connecticut Secretary of the State, hold a valid Federal Firearms License, certify compliance with affirmative action and equal employment requirements, and indemnify the Town against all claims arising from defective products or improper installation. Insurance requirements include $1 million per occurrence commercial general liability, $1 million errors and omissions coverage, and the Town must be named as an additional insured.

DAS Procurement

POSTED

DEADLINE

Supply of Artist’s Brushes (Commercial Off-the-Shelf Item)The contract entails the procurement and delivery of 5,700 units of artist’s brushes designated by NSN 8020006641375, classified as a commercial off-the-shelf item, to be supplied in full compliance with federal packaging, labeling, and logistics requirements. The shipment will be delivered on an FOB Origin basis, meaning all risk and responsibility transfer to the buyer once the carrier accepts the goods at the point of origin. This procurement is managed under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense, with the North American Industry Classification System code 339994 indicating it falls under Other Miscellaneous Manufacturing. The solicitation was posted on August 5, 2026, and performance is not restricted to a specific geographic location beyond the FOB terms. The contract identifier is SPE8E926V2075 and is accessible through the DIBBS system for official records.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Wipe Cloths SupplyThe contract requires the supply and delivery of five boxes of commercial wipe cloths, identified by NSN 6850014872859 and manufacturer part number AC9165, to Luke Air Force Base in Arizona. All items must fully comply with the specified contractual requirements and be delivered no later than August 20, 2026. Shipments must be sent using a traceable express method to ensure accurate monitoring and timely confirmation of delivery. This agreement is classified as a subcontract under the NAICS code 339994, and the contracting authority is the Defense Logistics Agency, operating under the Department of Defense. The solicitation details are tied to the contract reference SPE4AX16D9008 and delivery reference SPE4A726FA9K3, with the posting date listed as August 5, 2026.

Defense Logistics Agency

POSTED

DEADLINE

70--RTM, ADLINK COMPATI

Solicitation # N0010426QUC19

The Government is seeking a sole-source contract for a specialized component identified by NSN 1H-7010-016671872, titled 70--RTM, ADLINK COMPATI, under solicitation number N0010426QUC19, with a proposed delivery to W25G1U, W1A8 DLA DISTRIBUTION in New Cumberland, PA. Due to the unique nature of the part, the Government does not own the technical data or intellectual property rights required to source the item from alternative suppliers, and both acquiring the data and reverse engineering the component have been deemed uneconomical. The solicitation is issued under FAR 6.302-1, allowing for noncompetitive negotiation with a single source, though all responsible parties may submit capability statements within 45 days of the notice, or 30 days if under an existing Basic Ordering Agreement. The award will be contingent upon the offeror, product, or manufacturer meeting all qualification standards at the time of contract award, as specified in FAR clause 52.209-1. Technical specifications and military standards referenced in the procurement may be obtained through ASSIST-Online or the DODSSP, but design documents such as drawings or deviation lists are not available through these channels. This acquisition is designated as a Small Business Set Aside, Total, and the Government is not applying FAR Part 12 commercial item acquisition policies; however, interested parties may still propose commercial alternatives within 15 days of the notice. Primary contact for inquiries is Leigh E. Catchings at NAVSUP Weapon Systems Support Mech in Mechanicsburg, PA.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Wss

Same awarding agency

CRUDES Procurement RequirementThe Department of the Navy, specifically Navsup Wss, has issued a forecast for the procurement of one circuit card assembly. This requirement was posted on July 2, 2026, as part of the CRUDES procurement process. The performance of this contract is expected to take place at the vendor's facility. Further details regarding the solicitation and small business opportunities can be accessed through the Secretary of the Navy's small business portal.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 months ago

DEADLINE

MSC Repair RequirementThe Department of the Navy, specifically Navsup Wss, has issued a forecast for the repair of one circuit card assembly. This requirement is intended to ensure the operational readiness of critical electronic components through specialized repair services. The work is designated to be performed at the vendor's facility. Interested parties can find further information regarding small business opportunities and naval requirements through the official Secretary of the Navy small business portal.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

COMMON HM&E Repair RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the repair of one alternating current motor as part of the Common HM&E Repair Requirement. This procurement action is intended to restore the functionality of a specific motor unit to meet operational standards. The work is designated to be performed at the vendor's facility rather than a government site. Interested parties can find further information regarding this requirement through the Secretary of the Navy's small business portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

CRUDES Procurement RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the procurement of two circuit card assemblies. This requirement is listed under the CRUDES procurement category and was posted on July 2, 2026. The performance of this contract is designated to take place at the vendor's facility. Further details regarding the solicitation number, NAICS code, and specific set-aside designations have not been provided in the current forecast.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 months ago

DEADLINE

SUBMARINE LOGISTICS Procurement RequirementThe Department of the Navy, specifically Navsup Wss, has issued a forecast for the procurement of 31 temperature transducers to support submarine logistics. This requirement was posted on July 2, 2026, and is intended to secure necessary hardware for naval operations. The performance of this contract will take place at the vendor's facility. Further details regarding the solicitation number and specific set-aside designations have not been provided in the current forecast.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 months ago

DEADLINE

LI/SOC/FBW Repair RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the repair of one sleeve and slide unit. This requirement is designated as a repair service to be performed at the vendor's facility. The opportunity was posted on July 2, 2026, under the title LI/SOC/FBW Repair Requirement. Further details regarding the procurement process can be accessed through the Secretary of the Navy small business portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

CARRIER Repair RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the repair of 18 units of 16-inch gate valves. This requirement is designated as a carrier repair project and was posted on July 2, 2026. The work is intended to be performed at the vendor's facility. Interested parties can find further information regarding small business opportunities through the Secretary of the Navy's official portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

COMMON ELECTRONICS Procurement RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the procurement of one elevation servo under the Common Electronics Procurement Requirement. This acquisition is intended to secure a specific electronic component necessary for naval operations. The performance of this contract will take place at the vendor's facility. Interested parties can find further information regarding small business opportunities and procurement guidelines through the Secretary of the Navy's official small business portal.

Other Electronic Component Manufacturing

POSTED

about 2 months ago

DEADLINE

CRUDES Repair RequirementThe Department of the Navy, specifically Navsup Wss, has issued a forecast for the repair of five circuit card assemblies under the CRUDES Repair Requirement. This procurement action is intended to restore essential electronic components to operational status to support naval systems. The work is designated to be performed at the vendor's facility rather than a government site. While specific solicitation numbers and set-aside details have not yet been finalized, the requirement was officially posted on July 2, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

CRUDES Repair RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the repair of four circuit card assemblies under the CRUDES Repair Requirement. This procurement action is intended to restore essential electronic components to operational standards. The work is designated to be performed at the vendor's facility. This requirement was posted on July 2, 2026, and is currently categorized as a forecast to notify potential contractors of the upcoming need.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

LI/SOC/FBW Procurement RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the procurement of 50 units of socket head cap screws. This requirement is listed under the LI/SOC/FBW procurement project and was posted on July 2, 2026. The performance of this contract is to take place at the vendor's facility. Further information regarding this opportunity can be accessed through the Secretary of the Navy's small business portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 months ago

DEADLINE

CRUDES Repair RequirementThe Department of the Navy, through Navsup Wss, has issued a forecast for the repair of 19 radar modulators. This requirement focuses on the restoration of critical radar components to ensure operational readiness. The work is designated to be performed at the vendor's facility. While specific solicitation numbers and set-aside details have not yet been provided, the project was posted on July 2, 2026, as part of the agency's procurement planning.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 2 months ago

DEADLINE