This Solicitation opportunity from Department Of Defense was posted on July 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
LIDOCAINE HYDROCHLORID
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Lidocaine Hydrochloride and Epinephrine Injection, USP, in a 2 percent concentration with a 1:100,000 epinephrine ratio, is supplied in 1.7 mL cartridges packaged in units of 50 per PG, with a total order quantity of 10 PG. The product is strictly for local dental anesthesia via nerve block or infiltration and must be stored at controlled room temperature below 25°C (77°F), protected from light and freezing, and labeled as latex-free. The item has a total shelf life of 15 months, with a mandatory minimum of 13 months of remaining shelf life upon receipt by the first government activity, and this shelf-life requirement is non-extendable. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all containers must be sealed to prevent damage or breakage, with exterior shipping containers ensuring safe, cost-effective delivery via commercial carrier to the destination. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged in accordance with ASTM D3951, unless overruled by DLA’s Master List of Technical and Quality Requirements, which takes precedence. Delivery is FOB destination within five days, with no variance allowed in quantity, and shipment must use the fastest traceable means—parcel post is prohibited. The delivery point is PCU JOHN F KENNEDY CVN-79 in Suffolk, VA, and the required delivery date is July 30, 2026. The product is FDA-regulated, and procurement must include confirmation referral via EBS with full manufacturer, NDC, and supplier details.
General Info
Agency
NAICS
Place of Performance
DOORWAY 71, SUFFOLK, VA, 23435-5000, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
LIDOCAINE HYDROCHLORIDE AND EPINEPHRINE INJECTION, USP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
2 PCT LIDOCAINE HYDROCHLORIDE AND RATIO OF 1:100,000 EPINEPHRINE<(>,<)>
.
1.7 ML CARTRIDGE, 50'S
.
U/I: PG (50 CARTRIDGES)
.
.
STORE AT USP CONTROLLED ROOM TEMPERATURE, BELOW 25°C (77°F).
SPE2DP-26-T-4345
SECTION B
PROTECT FROM LIGHT. DO NOT PERMIT TO FREEZE. LATEX-FREE
.
FOR LOCAL DENTAL ANESTHESIA BY NERVE BLOCK
OR INFILTRATION ONLY.
.
TOTAL SHELF LIFE IS 15 MONTHS.
.
THERE SHALL BE A MINIMUM OF 13 MONTHS
OF REMAINING SHELF LIFE AT THE TIME OF
RECEIPT BY THE FIRST GOVERNMENT ACTIVITY.
.
.
LABELING AND MARKING MUST IN ACCORDANCE WITH
MEDICAL MARKING STANDARD
1 PG = 50 EA
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. RS012: Shelf-life requirement RS001 for a TYPE I (CODE J) item with a shelf life of 15 months (non-extendable) applies to this item.
BENCO DENTAL SUPPLY CO. 1V865 P/N NDC66975-0425-51 HENRY SCHEIN, INC. 0NUS8 P/N 02A0100 HENRY SCHEIN, INC. 0NUS8 P/N 2285791 HENRY SCHEIN, INC. 0NUS8 P/N 4651205 HENRY SCHEIN, INC. 0NUS8 P/N NDC00404-6512-05 DARBY DENTAL SUPPLY, LLC 5GKH5 P/N 9515491
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017636425 0001 PG 10.000
NSN/MATERIAL:6505015971328
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
SPE2DP-26-T-4345
SECTION B
PR: 7017636425 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N23410
PCU JOHN F KENNEDY CVN-79
6701 COLLEGE DRIVE
DOORWAY 71
SUFFOLK VA 23435-5000
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23410
PCU JOHN F KENNEDY CVN-79
6701 COLLEGE DRIVE
DOORWAY 71
SUFFOLK VA 23435-5000
US
M/F: (TCN) N234106205ZP38
RDD: 999
PROJ: ZD8 TP 1
SUPP ADD: N62645 SIG: B
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: M9L ADV: 2A FC: 68
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017636597 0001 PG 10.000
NSN/MATERIAL:6505015971328
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
SPE2DP-26-T-4345
SECTION B
PR: 7017636597 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N23410
PCU JOHN F KENNEDY CVN-79
6701 COLLEGE DRIVE
DOORWAY 71
SUFFOLK VA 23435-5000
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N23410
PCU JOHN F KENNEDY CVN-79
6701 COLLEGE DRIVE
DOORWAY 71
SUFFOLK VA 23435-5000
US
M/F: (TCN) N234106205ZP53
RDD: 999
PROJ: ZD8 TP 1
SUPP ADD: N62645 SIG: B
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: M9L ADV: 2A FC: 68
SPE2DP-26-T-4345
SECTION B
PR: 7017636597 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE2DP-26-T-4345 NSN/Part Number: 6505-01-597-1328 Quantity: 10 PG Purchase Request: 7017636425QTY: 10 Delivery: 5 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS