This Government Contract opportunity from Department Of Defense was posted on October 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Life Raft Case Testing and Validation

Closed

Federal

Submission Closed10/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

POSTED

DEADLINE

Production Lot Testing and Quality ValidationThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves performing production lot testing and quality validation for CUNI pipe flanges. The selected contractor will coordinate random sample selection with the Government QAR and execute tests according to the Technical Data Package to ensure quality conformance. Key deliverables include the preparation of DD Form 1222 and detailed certified test reports. The project is based in New Cumberland and falls under NAICS code 541380. Due to the handling of export-controlled technical data, the contractor must maintain CMMC Level 2 and JCP certifications. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors under the DLA Weapons Support Aviation Supply Chain. The primary objective is to execute contractor testing in accordance with procurement note E03 to ensure that aviation-grade shear bolts comply with all required technical and material standards. The scope of work involves utilizing specialized laboratory equipment for material verification and culminates in the delivery of a formal Production Lot Test approval and certification report. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in Cherry Point. Interested parties should note the solicitation timeline, which includes a posted date of November 4, 2026, and a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing specialized verification testing for prime contractors on Navy aviation and ship projects. The scope of work includes conducting First Article Testing for process validation, Production Lot Testing for batch sampling, and Product Verification Testing as requested by the Contracting Officer. All operations must utilize NDI tools and stress-testing rigs that comply with DoD safety standards to deliver certified test reports and pass results. The opportunity is categorized under NAICS code 541380 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Infrastructure Inspection and Watertightness TestingThis subcontract for the City of Richmond Hill involves providing physical inspections and watertightness testing for wastewater infrastructure projects. The selected contractor will support prime contractors by assessing the condition of manhole frames, covers, pump station wet wells, valve vaults, and impellers. These evaluations must be conducted using specialized vacuum testing equipment and inspection cameras, with all work performed by certified inspectors specializing in wastewater and concrete. The primary deliverables for this engagement include detailed condition assessment reports and formal watertightness test results. Interested parties should note that the response deadline is December 3, 2026, and the project falls under NAICS code 541380.

City of Richmond Hill

POSTED

DEADLINE

Field Performance Testing and CertificationThe Palos Verdes Peninsula Unified School District is seeking a subcontractor for Field Performance Testing and Certification for intermediate school projects located in Palos Verdes Estates. The selected provider will perform independent safety testing for prime contractors, specifically focusing on G-Max rating and shock attenuation testing. All work must be conducted using certified G-Max testing equipment in accordance with ASTM F1936 standards to verify the impact attenuation of finished synthetic surfaces. The contractor is responsible for delivering certified test reports and all necessary compliance documentation directly to the District. This opportunity is categorized under NAICS code 541380, with a response deadline set for November 18, 2026.

Palos Verdes Peninsula Unified School District

POSTED

DEADLINE

SFCC Functional Testing and Certification ServicesThe SFCC Functional Testing and Certification Services subcontract involves providing comprehensive inspection and performance testing for prime contractors on U.S. Navy SFCC projects. The scope of work requires the verification of form, fit, and function for Circuit Card Assemblies to ensure they meet strict system performance specifications. Additionally, the contractor is responsible for conducting traceability audits and producing precise material certification documents in accordance with SFCC protocols and DoDI 5230.24. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, this engagement focuses on the delivery of signed certification reports and detailed inspection results for 16 specific units. The project falls under NAICS code 541380, with a response deadline set for December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Quality Assurance, Inspection, and Testing for F100 ComponentsThis subcontract involves providing quality assurance, inspection, and testing services for F100 components to support prime contractors delivering DLA supply contracts for the Department of Defense. The selected provider will perform independent dimensional inspections, material testing, and final quality assurance in strict accordance with the Engineering Data List and Qualification Requirements. Technical execution requires the use of non-destructive testing equipment and Coordinate Measuring Machines to ensure all certified components and inspection reports meet rigorous standards. To be eligible for this engagement, the contractor must maintain AS9100 certification. The project is categorized under NAICS code 541380 and is managed by the DLA Aviation office in Oklahoma City. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Critical Safety Item (CSI) Testing and Certification ServicesThis subcontract for Critical Safety Item Testing and Certification Services supports the DLA Weapons Support Maritime Supply Chain by providing specialized testing, inspection, and validation for prime contractors. The scope of work includes conducting First Article Testing, source inspections, and ensuring precise marking and labeling in accordance with MIL-STD-129 and MIL-STD-130N(1) standards. These tasks are performed using high-precision metrology equipment and CMM to deliver certified inspection certificates and test reports. To qualify for this engagement, providers must maintain CMMC Level 2 compliance and hold either ISO 9001 or AS9100 certification. The opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 18, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Third-Party Quality Inspection and CertificationThis subcontract for Third-Party Quality Inspection and Certification supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform independent quality audits and inspections for prime contractors, focusing on Government Source Inspections and the verification of physical identification according to MIL-STD-129. Key responsibilities include validating ISO 9001 compliance and ensuring mercury-free certifications through the use of precision measurement and mercury detection equipment. The contractor is required to deliver detailed inspection reports and certifications of compliance to ensure all project standards are met. This opportunity falls under NAICS code 541380, with a response deadline set for November 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Environmental Laboratory Analysis (Lead & Asbestos)This subcontract for the City of Bell involves providing comprehensive analytical laboratory testing for lead, asbestos, and mold samples on environmental projects. The scope of work includes performing PCM, PLM, and TEM for asbestos, AAS for paint chip and dust lead, and spore trap and fungal direct examinations for mold. The selected provider is responsible for delivering all laboratory analysis results and completed Chain of Custody forms to the prime contractors. To qualify, the laboratory must maintain several critical certifications, including EPA ELLAP, EPA NLLAP, NVLAP, and AIHA, and must participate in the ELPAT Program. The project is categorized under NAICS code 541380 and will be performed in Bell, California. Responses for this opportunity are due by November 17, 2026.

POSTED

DEADLINE

Construction Quality Control TestingThis subcontract for Construction Quality Control Testing involves providing material testing and inspection services for prime contractors working on Maine Department of Transportation bridge projects statewide. The scope of work includes performing concrete slump tests, cylinder compression tests, and coating thickness measurements to ensure structural integrity and compliance. The selected provider must utilize certified testing personnel and is responsible for delivering detailed inspection reports and material certifications. This opportunity was posted on November 4, 2026, with a response deadline of November 25, 2026, falling under NAICS code 541380.

Maine Department of Transportation

POSTED

about 13 hours ago

DEADLINE

in 20 days

AI Contract Overview

The Life Raft Case Testing and Validation subcontract, issued by the Department of Defense via Depot Oklahoma, requires the performance of First Article Testing and Production Lot Testing for prime contractors on DLA supply contracts. The selected provider must execute all tests in accordance with QAP 14153 SQAP-FAT3 and SQAP-PLT3, utilizing the DNDT-80809B format for reporting and coordinating directly with NAWC Patuxent River for government testing. Final deliverables include signed certifications for both First Article and Lot Testing. This opportunity is a Total Small Business Set-Aside under NAICS code 541380. To be eligible, contractors must possess JCP Certification, ITAR/EAR authorization, and MIL-STD-1916 accreditation. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

General Info

DoD subcontract for life raft testing and validation for certified small businesses.

Agency

Department Of Defense → DEPOT OKLAHOMA

NAICS

541380 - Testing Laboratories and Services

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E5-27-Q-0019.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CASE, LIFE RAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 15

subcontract

Response DeadlineOct 22

Deadline has passed

Submission Closed

10/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DEPOT OKLAHOMA

Office AddressN/A

ContactsNo contact information available

Full Description

Performs First Article Testing (FAT) and Production Lot Testing for prime contractors on DLA supply contracts. Executes tests per QAP 14153 SQAP-FAT3 and SQAP-PLT3 and prepares reports using DNDT-80809B format. Coordinates with NAWC Patuxent River for government testing. Requires JCP Certification, ITAR/EAR authorization, and MIL-STD-1916 accreditation. Delivers signed FAT and Lot Testing certifications.