Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LIFTING TOOL, HUB AN

Active
SPE7L1-26-Q-1382Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits 14 units of a Hub and Final Drive Lifting Tool with NSN 4910-01-127-2712, under solicitation number SPE7L1-26-Q-1382, with a required delivery deadline 320 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item must comply with DLA packaging requirements and严禁 the use of Class I ozone-depleting chemicals, requiring approval for any alternative substances unless explicitly permitted by specifications. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons anywhere, including U.S.-based subsidiaries or employees, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The place of performance is specified as Texarkana, Texas, 75507-5000, and the contracting officer is Adam Howell, reachable via email and phone provided. The NAICS code is 333310, and the solicitation was posted on July 28, 2026, with responses due by August 4, 2026.

General Info

14 Hub and Final Drive Lifting Tools required, delivery in 320 days, ITAR/EAR controlled, Texarkana, Texas delivery.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-Q-1382.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
ADAM HOWELL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HUB AND FINAL DRIVE LIFTING TOOL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4910-01-127-2712 Quantity: 14 EA Purchase Request: 7017439254QTY: 14 Delivery: 320 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
INSERT TOOL, RECEPTAThe contract pertains to the procurement of an INSERT TOOL ASSEMBLY with a RECEPTICAL O-RING, identified by NSN 4921-01-382-9778 and part number BA38897-01, with a required quantity of four units. Delivery must be completed within twenty days from contract award, shipped FOB origin, and inspected and accepted at the destination. Packaging must comply with ASTM D3951, but is subject to higher precedence requirements from the DLA Master List of Technical and Quality Requirements, with labeling and marking conforming to MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and the use of ozone-depleting chemicals is strictly prohibited; any substitute chemicals require prior approval unless explicitly authorized by governing specifications. The item is classified as a critical application and is subject to Covered Defense Information protocols, requiring compliance with CMMC Level 2 self-assessment standards. Shipping is directed to the Navy Submarine Torpedo Facility in Yorktown, Virginia, and must be sent via the fastest traceable means—parcel post is prohibited. The contract number is SPE7M4-26-T-289M, with a required delivery date of July 23, 2026, and the primary point of contact is Rory O'Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
CLEANER, PRESSURE, SOThis contract is for the procurement of two units of a pressure cleaner under solicitation SPE7M4-26-T-289P, with a total price of $2.00 per unit and a required delivery within 20 days FOB origin. The item is identified by NSN 4940-01-497-9549 and is designated for delivery to the AWCF SSF Guam Storage Facility at Barrigada, Guam. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which are incorporated by reference, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents as authorized by NAVSEA. Portable devices containing mercury must meet shockproof standards and include a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination. Transportation guidelines are governed by DLAD Proc Notes C19 and C20. The action is a total small business set-aside under NAICS code 333310, with a response deadline of August 10, 2026, and the original required delivery date is July 23, 2026.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
CAP, FILLER OPENINGThe contract pertains to the procurement of two CAP, FILLER OPENING items with NSN 2590-01-646-1138 and part number CD-297 from Eaton Corporation, under solicitation SPE7L1-26-T-884K. Delivery is required within 20 days of contract award, with FOB destination terms and zero variance allowed on quantity. Inspection and acceptance both occur at the destination, and the items must be packaged in compliance with ASTM D3951, while adhering strictly to MIL-STD-129 marking and labeling requirements. Packaging must also conform to DLA’s Master List of Technical and Quality Requirements, which override any conflicting ASTM standards. The use of Class I ozone-depleting chemicals is expressly prohibited, and any substitute materials require prior approval unless explicitly authorized by specifications. The delivery location is APO AE 09853, with the freight shipping address at Abu Dhabi, UAE, designated as USE TAC 2 for shipping only. Transportation logistics are governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 23, 2026, and the procurement is under a federal DLA contract with NAICS code 333310. The primary point of contact is Kristina Derry at the Department of Defense, and all contractual obligations incorporate the DLA Master List active on the solicitation issue date.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR C
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
INSERT TOOL RECEPTA
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
WHITEBOARD CAPTURE
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
INSERT TOOL RECEPTA
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
INSTALLATION KIT, VE
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
OXY REMOVE CARTRIDG
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
Federal
Multi-tank water softener system and installationThe Phoenix Area Indian Health Service is seeking a qualified Indian Small Business Economic Enterprise (ISBEE) to supply and install a single Twin Tank Water Softener System at the Phoenix Indian Medical Center in Phoenix, Arizona, to replace an aging and deteriorating brine tank that has become unreliable due to structural weakness, sludge accumulation, salt bridging, and potential bacterial contamination. The system must be new, supplied directly by an OEM-authorized distributor, and include all necessary plumbing materials, labor, and full installation at the specified site—4212 N. 16th Street, BLDG 9, Phoenix, AZ 85016. Proposals must include verifiable proof of ISBEE status and an authorized distributor letter from the manufacturer to qualify, as only Native American-owned small businesses are eligible under a total small business set-aside. Refurbished, used, or gray market equipment is strictly prohibited, and the award will not be split; all components and services must be offered in a single comprehensive submission. The government will inspect and accept the system upon completion at the installation site, ensuring it meets performance standards for consistent water softening, protection of medical equipment, and uninterrupted hospital operations. Payment will be processed electronically via the Treasury’s Integrated Payment Processing (IPP) system as required by HHSAR 352.232-71, and all submissions must be emailed to the designated contracting point of contact by the specified deadline, with no electronic portal used for receipt. This solicitation serves as a market research tool under a Sources Sought action, and while no formal evaluation criteria or contract value has been established, responders must satisfy mandatory eligibility and compliance requirements related to small business status, OEM authorization, equipment newness, and full system delivery and installation.
Phoenix Area Indian Health Svc

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
Federal
Purchase SID4-DWIR wavefront sensor package
Naval Research Laboratory

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333310
New
DIBBS
BORESCOPE KITThe contract is for the procurement of five borecope kits identified by NSN 6650015906625 under solicitation SPE7L7-26-T-4323, issued as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333310. The delivery is required within 70 days after the date of order, with FOB Origin terms and destination inspection and acceptance. The contract specifies that the kits must match one of two approved part numbers: OPTIM LLC 2K570 P/N F015367 or SENECA ENTERPRISES LLC 58YR0 P/N VJ153. Packaging and marking must comply with MIL-STD-129 and DLA’s RP001 packaging requirements, with non-hazardous items packaged per ASTM D3951 and hazardous items per TQ requirement IP025 as defined by FED-STD-313, with all DLA Master List of Technical and Quality Requirements taking precedence over commercial standards. Sampling and inspection follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based method, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes deemed major. Zero non-conformances are required for acceptance under MIL-STD-105/ASQ Z1.4 unless otherwise stated. The contractor must be registered in the System for Award Management, update size and socioeconomic status in SAM as required, and comply with all applicable clauses including FAR 52.203-19, 52.222-50, 52.222-54, 52.223-3, 52.247-7023, and DFARS 252.204-7012, 252.223-7006, 252.223-7008, 252.225-7001, and 252.240-7997. The Berry Amendment and Buy American Act apply, and the use of additive manufacturing is prohibited. Payment must be processed through Wide Area Workflow with
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTIONThe contract specifies the procurement of a fuel injection nozzle with part number 27910-10 and NSN 2910013183720, quantity of eight units, to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containerization, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to the Assault Craft Unit 4 in Virginia Beach, Virginia, with explicit instructions to avoid parcel post and ship via the fastest traceable means. The required delivery date is July 10, 2026, with inspection and acceptance occurring at the destination. The contract includes detailed government-use identifiers, freight shipping information, and a point of contact for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of one unit of a specific item identified by NSN 5340015750820 and part number AT364985 under solicitation SPE7L1-26-T-885S, with a required delivery within 20 days of award. The item must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under FED-STD-313, it must be packed in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped by traceable means, not parcel post, and delivered to the designated military facility at Camp Lejeune, NC, using the specified freight address and contact information. The required delivery date is July 24, 2026, and the contract includes government-only identifiers and logistics codes for internal tracking and distribution. All technical and quality specifications referenced in the DLA Master List are binding and take precedence over any standard commercial practices.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
TAPPET, ENGINE POPPEThe contract is for the procurement of six TAPPET, ENGINE POPPE LIFTER, VALVE units with NSN 2815-00-450-9341 and part number 7S3161 supplied by CATERPILLAR INC. Each unit has a fixed price of $6.00, resulting in a total contract value of $36.00, with delivery required within five days of award at FOB origin. The items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must follow RP001 guidelines, with palletization conforming to specified DLA requirements and no parcel post permitted for shipment. Deliveries are to be routed to the government facility at Fort Eustis, Virginia, with a required delivery date of July 27, 2026, and must be sent by the fastest traceable means. The contract enforces zero variance in quantity and mandates inspection and acceptance at destination. Government-specific identifiers and markings are required, and all supplies must be labeled and documented according to DLA protocols, including the use of the provided military freight address, mark for details, and tracking information. The solicitation number is SPE7L1-26-T-883V, issued under the Department of Defense’s Land Supply Chain, with procurement subject to federal acquisition regulations and technical directives.
Other Engine Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336350
New
DIBBS
GEAR SUBASSEMBLY, SPThe contract pertains to the procurement of one gear subassembly with NSN 3010-01-570-7423 and part number A88245047, issued under solicitation SPE7L1-26-T-883Q by the Department of Defense’s Land Supply Chain. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. The item must be palletized per DLA packaging standards and shipped via traceable means, excluding parcel post, to the designated delivery point in Burlington, Kentucky. The unit of issue is each, with a total price of one unit at $1.00, and the required delivery date is July 29, 2026. All markings, labels, and documentation must follow specified government formatting guidelines, including the inclusion of the government procurement request number and designated shipping identifiers.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
PARTS KIT, AIR-HYDRAThe contract is for a Parts Kit, Hydraulic Brake Slave Cylinder with NSN 2530-00-204-9906, quantity of 33 units, under Purchase Request 7017385501, with delivery required within 185 days after award. The solicitation number is SPE7L1-26-Q-1381, issued on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, configuration change management via engineering change proposals and variance requests, and inspection and acceptance at origin. Export control regulations under ITAR or EAR apply to associated technical data, restricting its disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandated training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is Tracy, California, with the contracting office under the Department of Defense’s Land Supply Chain, and the primary point of contact is Adam Howell.
Motor Vehicle Brake System Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
CABLE AND CONDUIT AThe contract pertains to the procurement of one unit of a vehicular cable and conduit assembly identified by NSN 2530015596286 and part number 15300, supplied by SILVER EAGLE MANUFACTURING CO, under solicitation SPE7L1-26-T-885M. Delivery is required within 20 days from the award date with FOB origin terms, and no variance in quantity is permitted. The item must be packaged and preserved in strict compliance with MIL-STD-2073-1E and NEMA-WC26 standards, with marking governed by MIL-STD-129 and special preservation method ZZ as defined in SPE7L1-26-T-885M. The product is to be delivered to the designated government facility at 3920 KIRKWOOD HWY, WILMINGTON DE 19808-5194, with shipment required via the fastest traceable means and parcel post expressly prohibited. Inspection and acceptance occur at destination, and all packaging and shipping of hazardous materials must adhere to IP025 specifications. Preservation, packaging, and packing methods follow the technical requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract includes precise government-only identifiers and logistical codes including TCN M2232061980033, RDD, and project code TP 2, with the original required delivery date set for July 23, 2026. Point of contact for procurement inquiries is Kristina Derry at DLA.
Other Motor Vehicle Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
O-RINGThis contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1078 and part number 391 2882 499 from EATON CORP FLUID POWER OPNS, under solicitation SPE7L1-26-T-884B. The item must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-117, TYPE II, CLASS C, STYLE 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation. Marking shall follow MIL-STD-129, including special instruction “20 -20 Do not bend,” and palletization must meet DLA packaging requirements. The supply is destined for Prince Sultan Air Base, Saudi Arabia, with freight logistics governed by DLAD PROC NOTES C19 and C20. Technical and quality requirements referenced via R and I numbers are defined in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, and the purchase request number is 7017636739. The contract includes federal supply classification data and imposes hazardous materials shipping compliance under IP025. The original required delivery date is July 27, 2026, with a response deadline of August 10, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332439
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of a single mounting bracket, identified by NSN 5340-01-464-7761, with a delivery requirement of 10 days after contract award. It is issued under solicitation SPE7L1-26-T-882R by the Department of Defense’s Land Supply Chain, with performance located at Fort Benning, Georgia. The procurement is subject to full and open competition and incorporates stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The contractor must be a CMMC Level 2 certified third-party assessment organization and comply with DLA packaging requirements, including the removal of government identification from non-accepted supplies. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access and disclosure to foreign persons without prior authorization from the Department of State or Commerce; only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may handle the data. Compliance with DFARS 252.225-7048 is mandatory. The solicitation response deadline is August 10, 2026, and all terms are governed by applicable federal acquisition regulations.
Other Metal Container Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details