Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

LIGHT EMITTING DIODE

Active
SPE7M2-26-T-5596Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract encompasses the procurement of light emitting diodes under solicitation SPE7M2-26-T-5596, with a requirement for 511 units delivered within 168 days to Tinker Air Force Base, Oklahoma. The items are classified as commercial items and must comply with DLA packaging standards outlined in RP001, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking required. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected unless otherwise specified, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Mercury and mercury-containing compounds are strictly prohibited in or on the supplies except in approved exceptions such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specifically identified by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and transportation is governed by DLAD procedural notes C19 and C20. The NSN for the item is 5980-01-307-5939, and the contract is managed by the Department of Defense’s Nuclear Reactor Program with David Larsen as the primary point of contact.

General Info

DLA seeks 511 military-grade LEDs via solicitation SPE7M2-26-T-5596, due July 20, 2026, for U.S. performance.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5596.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS

Full Description

Show more
LIGHT EMITTING DIODE
LIGHT EMITTING DIOD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
WAMCO, INC. 58774 P/N 0LY6228-0
STACO SYSTEMS, INC. 12522 P/N 15082-216
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M2-26-T-5596
SECTION B
PR: 7017437217 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017437217 0001 EA 511.000
NSN/MATERIAL:5980013075939
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/05/2027 Original Required Delivery Date:03/06/2027
SPE7M2-26-T-5596 NSN/Part Number: 5980-01-307-5939 Quantity: 511 EA Purchase Request: 7017437217QTY: 511 Delivery: 168 days ADO

Similar Contracts

NAICS: 334413
New
Federal
CBr4 Gas Delivery SystemThe U.S. Department of Commerce, National Institute of Standards and Technology (NIST), through its Physics Measurements Laboratory Applied Physics Division Quantum Nanophotonics Group, is conducting market research to identify potential commercial suppliers of a carbon tetrabromide (CBr4) gas delivery system for use in molecular beam epitaxy (MBE) processes to grow quantum dot structures. This sources-sought notice, identified by solicitation number NB686100-26-01989, is not a solicitation or request for quotation and does not obligate the government to award a contract. The agency seeks detailed capability statements from small businesses capable of providing a new, off-the-shelf cryogenic gas source system that delivers CBr4 under ultra-high vacuum conditions, is compatible with VEECO Molly software and a VEECO GEN10 MBE system with dual gas/solid source injectors, and supports precise doping levels between 1e16 cm-3 and 1e20 cm-3 in GaAs at one monolayer per second. The system must feature a temperature-controlled, sealed, and vented cabinet for the CBr4 bottle, heated injection lines to prevent condensation, and closed-loop pressure control with stability under 0.2 mTorr. All systems must be commercially available, new, and covered by the manufacturer’s full warranty; refurbished, prototype, gray-market, or unverified components are not acceptable. Manufacturers must perform on-site testing prior to shipment and provide verifiable temperature and pressure data. Respondents must submit a four-page capability statement including company and manufacturing entity names, country of origin, product specifications and examples, typical lead time, and any supplemental information, submitted electronically to deionne.jones@nist.gov by the deadline of June 15, 2026. Sales brochures and marketing materials are prohibited. The system is intended for delivery to NIST-Boulder, Colorado, with an expected timeline of six months after order receipt, and partial shipments are acceptable. US citizenship is required for on-site visits, and foreign nationals must register at least 30 days in advance. All proprietary information must be clearly labeled, and the government will not compensate respondents for information submitted. The action is a total small business set-aside under NAICS code 334516, with a small business size standard of 1,000 employees, and the government is evaluating potential vendors within this framework to inform future procurement
Department Of Commerce Nist

POSTED

3 days ago

DEADLINE

in 8 days
View Details