Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LIGHT, INDICATOR

Active
SPE4A6-26-T-22TZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 21 indicator lights, identified by NSN 6220992331322 and part number 347/20547 from JCB Inc. The agreement specifies a delivery timeframe of 135 days after order, with a required delivery date of April 15, 2027. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to strict quality and packaging standards, including DLA packaging requirements, MIL-STD-129 for marking and labeling, and specific sampling methods per MIL-STD-1916 or ASQ H1331. Technical and quality requirements are governed by the DLA Master List, and the contract mandates the removal of government identification from non-accepted supplies and specific physical item marking. Inspection and acceptance will take place at the destination.

General Info

JCB Inc will supply 21 indicator lights to DLA by April 15, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-22TZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Shalon Bond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LIGHT,INDICATOR
LIGHT,INDICATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
JCB INC. 0JKF0 P/N 347/20547
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A6-26-T-22TZ
SECTION B
PR: 7017572757 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572757 0001 EA 21.000
NSN/MATERIAL:6220992331322
DELIVERY (IN DAYS):0135
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/17/2027 Original Required Delivery Date:04/15/2027
SPE4A6-26-T-22TZ
SECTION B
PR: 7017572757 PRLI: 0001 CONT’D
SPE4A6-26-T-22TZ NSN/Part Number: 6220-99-233-1322 Quantity: 21 EA Purchase Request: 7017572757QTY: 21 Delivery: 135 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333515
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A6-26-T-16ND
Solicitation SPE4A6-26-T-16ND is issued by the Department of Defense ASC Commodities Division for the procurement of one Light Assembly, INDI (NSN 6220-01-592-8284). The requirement specifies adherence to Technical Data Package Rev A Gen 1 and basic drawing 30003 3922AS121, among others. Delivery is required by August 12, 2026, to the FRC Supp Equip Fort Worth NAS JRB in Texas, with terms set as FOB Origin and a delivery window of five days after order. The contract mandates a CMMC Level 2 self-assessment and requires the use of Wide Area WorkFlow (WAWF) for all electronic invoicing. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and IP025, or commercial packaging per ASTM D3951 for non-hazardous items. Identification marking must follow MIL-STD-130N. Offerors must submit quotes electronically via the DLA Internet Bid Board System (DIBBS) by August 21, 2026. Key regulatory compliance includes the prohibition of hexavalent chromium, adherence to the Buy American Act, and strict hazardous material labeling under 29 CFR 1910.1200.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333515
New
DIBBS
LIGHT ASSEMBLY, INDICAT
Solicitation # SPE8E7-26-T-3694
This contract, identified as SPE8E7-26-T-3694, is a solicitation issued by the Defense Logistics Agency for the procurement of two indicator light assemblies, part number 5252105 and NSN 6220015884675. The delivery is required within 20 days after receipt of the order, with a required delivery date of August 24, 2026. The shipment is destined for US Forces 378 ELRS LGRDDC at Prince Sultan Air Base, Saudi Arabia, with shipping terms set as FOB Origin. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on the hazardous nature of the material, packaging must follow either TQ requirement IP025 or ASTM D3951. Inspection and acceptance will take place at the destination. The contract also incorporates technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies to this procurement.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333515
New
Federal
Live Fire Fabrication Tools
Solicitation # W911S226U3940
The U.S. Army Office at Fort Drum, under the Department of Defense, is seeking authorization to procure specialized fabrication tools required to produce 800 rotating target mounts for use in Rotational Live Fire Training Exercises. These tools are critical for cutting, welding, drilling, and assembling the mounts to precise strength and performance standards, ensuring they meet the operational demands of live fire training. Without the proper tooling, the Operations Group cannot achieve the necessary production volume or timeline adherence, compromising the efficiency and effectiveness of training exercises. The procurement will enable long-term sustainment of the target mounts and directly enhance training outcomes by improving target reorientation speed and overall live fire flexibility. This solicitation is designated as a Small Business Set Aside under NAICS code 333515, targeting qualified small businesses to fulfill the requirement. The combined notice was posted on August 5, 2026, with a response deadline of August 14, 2026. The place of performance is listed as 92310, and the primary point of contact is Garfield Fairclough, reachable via phone or email. The solicitation number is W911S226U3940, and all correspondence and submissions must follow the official SAM.gov portal link provided. The contract aims to secure not just equipment, but the foundational capability to maintain and scale live fire training readiness across the force.
W6QM Micc-Ft Drum

POSTED

about 10 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333515
New
DIBBS
HOLDER SECTION, CUTT
Solicitation # SPE8E5-26-T-4073
This contract, identified as SPE8E5-26-T-4073, is a solicitation issued by the Defense Logistics Agency for the procurement of 30 units of part number BH46HM017 (NSN 3460-01-620-4101) from FECON, LLC. The agreement specifies a delivery timeframe of five days and requires shipment via the fastest traceable means to the Distribution Management Office in Beaufort, South Carolina. The original required delivery date is set for August 24, 2026. The contract mandates strict adherence to DLA packaging and marking standards, specifically referencing MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. It incorporates technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies. Inspection and acceptance will take place at the destination, with shipping terms set as FOB Origin.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333515
New
DIBBS
GAGE, DEPTH, RULE
Solicitation # SPE8E5-26-T-4062
This solicitation, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-4062, is for the procurement of one depth rule gage, identified by NSN 5210-01-602-6297. The request was posted on August 25, 2026, with a response deadline of September 8, 2026. The item is required for delivery within five days after the order is received and will be performed at a location in FPO, zip code 96607. The contract is subject to strict technical and quality requirements as outlined in the DLA Master List, including Cybersecurity Maturity Model Certification Level 2 and regulations regarding covered defense information. Furthermore, the item contains technical data subject to export controls under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed training to access the data. All quotes must be submitted via DIBBS and comply with applicable FAR and DFARS clauses, including the Buy American Act and HUBZone preference notices.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333515
New
DIBBS
TREPANNING TOOL, MAC
Solicitation # SPE8E5-26-T-4044
This contract is for the procurement of one Trepanning Tool, MAC, identified by NSN 3455-01-725-6198 and part number CP2-SY-001 from Perfect Point EDM Corporation. The agreement, under solicitation number SPE8E5-26-T-4044, specifies a delivery timeframe of 167 days after order, with a required delivery date of March 2, 2027. Shipping is set as FOB Origin, and the item is to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific guidelines for source approval requests, covered defense information, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following the RP001 requirements. Inspection and acceptance will take place at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333515
New
Federal
Supply of Tube-Line TF3.0 Manual End Finishing Machine
FA4887 56 Cons Cc

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
Federal
Tube-Line TF3.0 Manual End Finishing Machine
Solicitation # FA488726Q0042
The Department of Defense, specifically through the 56th Combat Communications Squadron at Luke Air Force Base, Arizona, has issued solicitation FA488726Q0042 for the procurement of a Brand Name Tube-Line TF3.0 Manual End Finishing Machine. This requirement is designated as a Total Small Business Set-Aside under NAICS code 333515. Interested parties must submit quotes by the deadline of September 4, 2026. It is important to note that funding is not currently available for this effort, and no award will be made until such funds are secured. The government maintains the right to cancel the solicitation at any time without obligation to reimburse offerors for any incurred costs. Offerors are requested to provide firm quotes that remain valid through September 30, 2026; however, if market volatility necessitates a shorter period, the maximum duration for price validity must be clearly stated. Performance and delivery are centered at Luke Air Force Base, and all activities must adhere to established Department of Defense security protocols. This includes compliance with anti-terrorism and force protection guidelines, such as identifying suspicious activities and understanding Force Protection Condition levels and mass notification systems used on the installation.
FA4887 56 Cons Cc

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
DIBBS
DOG, LATHE
Solicitation # SPE8E9-26-T-3491
This contract, identified by solicitation number SPE8E9-26-T-3491, is for the procurement of 10 units of a lathe dog, classified under NSN 3460-01-440-0783. The acquisition is managed by the Department of Defense through the Defense Logistics Agency, with a required delivery timeframe of 120 days from the order date. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania. The contract incorporates specific technical and quality requirements found in the DLA Master List, and the manufacturer must adhere to strict sampling methods such as MIL-STD-1916 or ASQ H1331 to ensure product compliance. Strict compliance with packaging, preservation, and marking standards is mandatory, specifically following MIL-STD-2073-1E, MIL-PRF-23199E, and MIL-STD-129. Additionally, the contract includes a prohibition on the intentional addition of mercury or mercury-containing compounds to any hardware or supplies, with limited functional exceptions. Bar coding must comply with ISO/IEC 16388 standards. The procurement process is subject to specific quality assurance provisions regarding critical, major, and minor attributes, and the supplier is responsible for ensuring all non-accepted supplies have government identification removed.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 333515
DIBBS
BLOCK, STEP, MACHINISTS'
Solicitation # SPE8E5-26-T-4009
This solicitation, issued by the Defense Logistics Agency under contract number SPE8E5-26-T-4009, calls for the procurement of two machinist block, step units, identified by NSN 5220-01-627-4746 and part number CL-20-BS from Carr Lane Manufacturing Co. The requirement specifies a delivery timeframe of 10 days with FOB Origin terms, and both inspection and acceptance are to occur at the destination. The shipment is to be sent to the OD CO Support Maintenance facility in New Orleans, Louisiana, using the fastest traceable shipping method, specifically excluding parcel post. The contract incorporates strict technical and quality requirements as outlined in the DLA Master List, which take precedence over standard ASTM D3951 packaging protocols. All items must be marked and labeled in accordance with MIL-STD-129, and palletization must comply with DLA packaging requirements for procurement. Additionally, the contract notes that covered defense information may potentially apply, and the supplier is responsible for the removal of government identification from any non-accepted supplies.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 333515
DIBBS
LAMP UNIT, VEHICULAR
Solicitation # SPE8E7-26-T-3640
This contract, identified by solicitation number SPE8E7-26-T-3640, is for the procurement of 87 vehicular lamp units under National Stock Number 6220-01-576-3671. The items are associated with part numbers 01-6239-74 from Grote Industries Inc and GRO 01 6239 74 from Daimler Truck North America LLC. The delivery is scheduled for approximately 152 days after the order, with a target need date of January 31, 2027, and a required delivery date of February 5, 2027. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and potential coverage of covered defense information. Packaging must comply with MIL-STD-129 for marking and labeling, and must follow specific protocols for hazardous or non-hazardous materials as defined by FED-STD-313 and ASTM D3951. Additionally, the contract incorporates specific DLA master list requirements and mandates the removal of government identification from any non-accepted supplies. All palletization and shipping must adhere to the established DLA procurement notes and packaging requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 333515
DIBBS
CUTTER, MILLING, END
Solicitation # SPE8E5-26-T-4019
This contract, identified by solicitation number SPE8E5-26-T-4019, is for the procurement of 27 end milling cutters, specifically part number 39708TA from Ultra Tool International Inc. The acquisition is managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility. The items are subject to strict technical and quality requirements as outlined in the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds to the hardware, with limited functional exceptions. The delivery terms specify a destination-based inspection and acceptance process with a required delivery date set for early 2027. Shipping and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, ensuring proper marking and palletization according to DLA procurement requirements. The contract also notes that covered defense information may apply and that no technical data bidset is currently available from the DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

7 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-22RT
This contract is a solicitation for the procurement of 100 retaining rings under NSN 5325-00-944-8277. The requirement specifies several approved part numbers from Smalley Steel Ring Co, Spirolox Inc, and Hamilton Sundstrand Corporation. The delivery is required within 5 days after receipt of order, with FOB origin for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-130N for identification and MIL-STD-129 for marking. Logistics involve G&B Packing Company as the freight forwarder, with the final destination being the Government of Israel Ministry of Defense. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-22UY
This contract is for the procurement of 25 plain slotted hexagon nuts, identified by part number MS9364-16 and NSN 5310009436609. The items must adhere to SAE AS9364 standards with a thread class of 3B and are designated as critical application items. The hardware must be manufactured according to the current revision of the part standard, though previously manufactured stock meeting the then-current revision is acceptable. The agreement specifies a delivery timeframe of five days with FOB origin for both inspection and acceptance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by specific DLA master list requirements, including tailored higher level quality requirements and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The final shipment is destined for the UH-60M Main Warehouse in Australia via a designated freight forwarder.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-22RB
This contract, solicitation number SPE4A6-26-T-22RB, is for the procurement of six blind rivets under NSN 5320-01-290-9684 for the Department of Defense ASC Commodities Division. The delivery requirement is set for 112 days after receipt of order, with the place of performance located at Hill AFB. The procurement is subject to specific DLA packaging, marking, and documentation requirements, including source approval requests and configuration change management. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, with specific AQLs assigned for critical, major, and minor attributes. While item unique identification is not required, the contract contains strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
This solicitation is for the procurement of 267 self-locking hexagon nuts under contract number SPE4A6-26-T-17LV for the Department of Defense ASC Commodities Division. The items must be manufactured according to current military or consensus non-government part standards, with a delivery requirement of 171 days after receipt of order. Performance is based in Jacksonville, Florida, and the procurement is conducted as fully competitive. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging, bare item marking, and the removal of government identification from non-accepted supplies. Quality assurance involves inspection and acceptance at origin using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional purposes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
This contract is for the procurement of 4,428 shear bolts, identified by NSN 5306-01-130-8993 and part number NAS6604-5. The items are classified as critical application hardware and must be manufactured according to the current revisions of NAS6603 through NAS6620 and NAS4002. Delivery is required within 171 days, with a need date of February 12, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-130N identification is mandatory. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of three structural aluminum plates under NSN 1560-01-723-7586. The contract requires delivery within 198 days after receipt of order and is categorized under NAICS code 336413. Performance is to take place in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, DIAL
Solicitation # SPE4A6-26-T-17YY
This contract is for the procurement of nine dial indicating differential pressure gages, identified by NSN 6685010738428 and part number 20NCX250X25K2BBAXX03 from Cameron Energy Services Corp. The delivery is set for 171 days after order, with a required delivery date of January 14, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, specifically noting the items as delicate instruments. Quality assurance will be managed via MIL-STD-1916 or ASQ H1331 sampling plans, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds. Item Unique Identification is not required for this request.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSION
Solicitation # SPE4A6-26-T-17MB
This contract is for the procurement of 11 spring tension washers, identified by NSN 5310014451502 and part number BEL-2801-241. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of December 11, 2026. The contract specifies a delivery window of 171 days and allows for zero quantity variance. Compliance requirements include adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Technical data for this item is currently proprietary or insufficient for competitive procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XV
This contract is for the procurement of 103 blind rivets, identified as a critical application commercial item under NSN 5320010422897. The hardware must be manufactured according to the current revisions of part standards NAS9310 and NAS1687. The order is managed by the ASC Commodities Division of the Department of Defense with a required delivery date of March 19, 2027, and a delivery window of 171 days. The agreement specifies strict quality and sampling requirements following MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17KC
This contract is a solicitation for the procurement of 156 turnlock fastener studs under part number 5325-00-728-8500. The delivery requirement is set for 84 days after order, with the place of performance located in Cherry Point. The acquisition is managed by the Department of Defense through the ASC Commodities Division. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, bare item marking, and sampling methods based on MIL-STD-1916 or ASQ H1331. It includes critical security and compliance mandates such as CMMC Level 2 certification, the protection of covered defense information, and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-16UR
This contract is a solicitation for the procurement of 1,100 flat washers under NSN 5310-00-235-3544 for the Department of Defense ASC Commodities Division. The delivery requirement is set for 107 days after the order is placed, with performance located in San Diego, California. The acquisition is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating standards for packaging, the removal of government identification from non-accepted supplies, and bare item marking. Quality assurance is managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases approved by NAVSEA. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-22QV
This contract is for the procurement of 255 self-locking plate nuts, identified as NSN 5310015971830 and part number M45913/1-010CS3. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Delivery is required within 249 days, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Identification marking must comply with MIL-STD-130N and MIL-STD-129, while packaging and palletization must follow MIL-STD-2073-1E and DLA requirement RP001. The contract specifies a zero percent quantity variance and mandates that inspection and acceptance occur at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details