Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Lighting and Electrical DRAFT Solicitation_SPE4AX26R0018: Response to Industry Feedback

Active

DRAFT_SPE4AX26R0018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency Weapons Support in Richmond, Virginia, has issued a draft solicitation titled Lighting and Electrical DRAFT Solicitation_SPE4AX26R0018 to address industry feedback received on the initial draft published in May 2026. This document provides clarifications and responses to frequently asked questions but is not a final solicitation; a formal request for proposals is expected to follow shortly. The procurement is classified as an 8A competed set-aside under NAICS code 335999, indicating it is reserved for small disadvantaged businesses and will be competitively awarded. The primary point of contact for inquiries is Jessica Ozmore Rackley, reachable by phone and email, with Gary Miller listed as a secondary contact. The solicitation is administered by the Department of Defense and all correspondence should be directed through the official SAM.gov portal linked in the posting.

General Info

DOD issues 8A set-aside for small disadvantaged businesses to procure lighting and electrical systems in Richmond.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

VA

Set-Aside

8A

Documents

(1)

Lighting and Electrical Draft Solicitation SPE4AX26R0018 Responses to Industry Feedback

PDF•q-and-a

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhasePresolicitation

PostedJul 16

Presolicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts2 people available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

Jessica Ozmore (Rackley

contact@example.gov

+1 (555) 000-0000

Gary Miller

contact@example.gov

Full Description

Show more

In response to the industry feedback submitted regarding the Lighting and Electrical draft solicitation published on SAM.GOV on May 14, 2026, Defense Logistics Agency (DLA) Weapons Support (Richmond) has prepared the attached documentation addressing the most frequently raised questions and requests for clarification. A revised, formal solicitation is anticipated to be issued in the near future.

Similar Contracts

Same NAICS industry code

COMPUTER SUBASSEMBL

Solicitation # SPE8EN-26-T-2984

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

HEATER, THERMAL RELEASE

Solicitation # SPE7M5-26-T-419X

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-21AE

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ADAPTER, POWER SUPPLY

Solicitation # SPE7L7-26-T-4842

Defense Logistics Agency

POSTED

DEADLINE

BOOT, DUST AND MOIST

Solicitation # SPE7LX-26-U-9177

Solicitation SPE7LX-26-U-9177 is an Indefinite Delivery Contract issued by the DLA Land and Maritime, Strategic Acquisition Program Directorate, for the procurement of dust and moisture seal boots (NSN 5340-01-128-6056). The requirement is for an estimated quantity of 378 units, with a delivery schedule of 75 days after the date of order. The contract is governed by a maximum value of 350,000.00 dollars and specifies that inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, utilizing MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require compliance with FED-STD-313 and TQ Requirement IP025. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires the submission of Safety Data Sheets for any hazardous materials. Payment and invoicing must be processed through the Wide Area WorkFlow (WAWF) system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

in about 11 hours

INSULATION SHEET, ELECT

Solicitation # SPE4A5-26-T-376Z

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

INSULATION SHEET, EL

Solicitation # SPE4A7-26-T-638C

The contract specifies the procurement of electrical insulation sheets under NSN 5970014696198, with dimensions of 48.000 x 96.000 x 0.125 inches nominal, in a quantity of 226 units, each unit being one sheet. Delivery is required FOB origin with a lead time of 112 days, and the original delivery deadline is August 28, 2026, with a needed ship date of December 9, 2026. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the contractor’s origin. Packaging must conform to MIL-STD-2073-1E with specific preservation codes including method 10, climate control level 1, and no preservation material used. Marking must comply with MIL-STD-129, including bar code labeling for NSN, contract number, and shipping address, with no special marking required. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated for acceptance regardless of sampling method used, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The material has no shelf life requirement and qualifies as a critical application item, with the manufacturer identified as McMaster-Carr Supply Co, part number 8574K73. The contract includes mandatory cybersecurity requirements via CMMC Level 2 Self-Assessment and DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, alongside FAR clauses on employment verification, trafficking in persons, sustainable products, hazardous materials identification, and system for award management maintenance. Compliance with DoD packaging, marking, and transportation standards is enforced, including adherence to RP001 for palletization and DLAD proc note C19/C20 for freight logistics. All offerors must be registered in SAM and provide UEI and CAGE codes, and are required to self-certify small business status including WOSB, EDWOSB, SDVOSB, HUBZone, and 8(a) participation if applicable. A prohibition on acquiring covered defense telecommunications equipment applies, and hazardous materials must be fully disclosed with submitted

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 11 hours

Solicitation # SPE7LX-26-U-9216

Solicitation SPE7LX-26-U-9216 is an Indefinite Delivery Contract issued by the DLA Land and Maritime, Strategic Acq Program Directorate for the procurement of power supplies, specifically NSN 6130016124130 (Rockwell Automation P/N 1606-XLE120-E). The contract has a maximum value of 350,000 dollars and an estimated annual quantity of 39,000 units, with a guaranteed minimum of 5 units. Deliveries are required within 34 days after receipt of order on an FOB Origin basis, with inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Marking and labeling must comply with MIL-STD-129, and palletization must follow RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment, safeguarding of covered defense information, and a strict prohibition on the intentional addition of mercury to hardware. Administrative requirements include mandatory electronic invoicing via Wide Area WorkFlow and maintaining an active SAM registration.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

in about 11 hours

SOLENOID, ELECTRICAL

Solicitation # SPE7M1-26-U-4937

Solicitation SPE7M1-26-U-4937 is a Simplified Indefinite-Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of electrical solenids, specifically General Motors LLC part number 24248892 and NSN 5945-01-568-2679. The contract has an estimated annual quantity of 1,485 units, with a guaranteed minimum of 222 units and a maximum contract ceiling of 350,000 dollars. Delivery is required within 133 days after receipt of order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict military and industry standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IPC/JEDEC J-STD-609 for lead finish identification. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract incorporates comprehensive FAR and DFARS clauses covering cybersecurity requirements such as NIST SP 800-171 and DFARS 252.204-7012, as well as hazardous material labeling and sustainable product mandates. Proposals must be submitted electronically via the DIBBS portal by August 19, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

BOOT, DUST AND MOIST

Solicitation # SPE7L1-26-T-990K

LAND SUPPLY CHAIN

POSTED

DEADLINE

HOLDER ASSEMBLY, ELECTRICAL CONTACT BRUSH

Solicitation # SPE4AX-26-R-0010

The Defense Logistics Agency (DLA) Aviation intends to award a ten-year, requirements-type long-term contract to Moog, Inc. (CAGE 99932) for the sole-source procurement of consumable and Depot Level Reparable spare parts supporting various military weapon systems. This acquisition renews the existing contract SPE4AX-17-D-9415, which expires on August 24, 2027, and will be conducted under non-competitive procedures authorized by 10 U.S.C. 2304(c)(1) and FAR 6.103-1, as Moog, Inc. is the original equipment manufacturer and the only source capable of supplying these parts due to proprietary design and lack of technical data available to the government. The contract will consist of a five-year base period followed by a five-year option period, with pricing structured as firm fixed price and subject to price redetermination at the time of option exercise. An Economic Price Adjustment clause is anticipated to accommodate market fluctuations over the contract term. All items will be procured on a part number basis, with no technical specifications provided by the government, and deliveries will be made directly to DLA. The solicitation, identified as SPE4AX26R0010, is expected to be issued on August 14, 2026, and will follow FAR Part 15 negotiated procedures under a non-commercial classification. While the acquisition is primarily sole source, non-OEM suppliers, including surplus dealers, are invited to submit responses with traceability documentation or surplus certificates, along with evidence of supply capability, available quantities, and pricing; these submissions may influence the government’s decision to alter its acquisition strategy if surplus inventory or newly manufactured alternatives prove beneficial. All items are detailed in an attachment listing part numbers, FSC, NIIN, nomenclature, and estimated annual demand quantities, and while military-grade packaging and marking standards are implied, no specific requirements are stated. Contract performance will occur at Moog’s facility in Blacksburg, VA, with acceptance managed by DLA in Richmond, VA. No set-asides apply, and while responses are accepted through July 15, 2026, no commitment to award is implied by this announcement.

SMSG AVIATION SUP CH CORPORATE LTC

POSTED

DEADLINE

in about 2 months

Solicitation # SPE8E7-26-T-3653

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

LINER, FUEL TANK

Solicitation # SPE4A7-26-R-0714

The contract is for a liner, fuel tank item designated for use on the UH-60 helicopter, identified by NSN 1560-011215115 and part number 70211-03010-105, manufactured in full compliance with drawing 78286 70211-03010, revision K dated November 30, 2017. This procurement is structured as an indefinite quantity contract with a two-year base period and no options, issued as a total small business set-aside, with an estimated annual requirement of 80 units. All delivery of production units must be completed within 300 days of order placement, with FOB origin terms and inspection and acceptance performed at the manufacturer’s location. Access to technical data associated with this item is restricted to contractors certified under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Service to gain authorization. The solicitation, numbered SPE4A726R0714, will be made available exclusively through the DLA Internet Bid Board System on or about August 20, 2026, with proposals due by September 21, 2026. No paper copies will be distributed, and potential bidders must use the latest Adobe Acrobat Reader to access the PDF solicitation documents. The contracting office is located in Richmond, Virginia, with primary point of contact Ryan Loeffelholz.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Packaging, Palletizing & FOB-Origin Logistics

Other Warehousing and Storage

POSTED

DEADLINE

in about 11 hours

Hazardous Materials Compliance & Labeling Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 11 hours

Special-Purpose Electrical Cable Assembly Manufacturing

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

in about 11 hours

Cybersecurity Compliance (NIST SP 800-171 Assessment & Reporting)

Computer Systems Design Services

POSTED

DEADLINE

in about 11 hours

Hazardous Materials Compliance & SDS Management

Environmental Consulting Services

POSTED

DEADLINE

in about 11 hours

Military-Grade Packaging and Marking Services

POSTED

DEADLINE

in about 11 hours

Precision Valve Manufacturing – Linear Directional Control Valve

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 11 hours

Butterfly Valve Manufacturing and Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

CMMC Level 2 and NIST SP 800-171 Compliance Support

Computer Systems Design Services

POSTED

DEADLINE

in about 11 hours

Domestic Freight Delivery to DLA New Cumberland

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 11 hours

Military-Compliant Packaging, Labeling, and Hazard Communication

Other Warehousing and Storage

POSTED

DEADLINE

in about 11 hours