Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Linear Actuating Cylinder Assembly Fabrication

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of 22 linear actuating cylinders for prime contractors supporting the DLA Weapons Support Land Supply Chain. The project requires the manufacture of assemblies according to Basic Drawing NR 30003 3221AS703 Rev A and TDP Rev A Gen 1, resulting in the delivery of completed and tested Linear Actuating Cylinder Assemblies under NSN 3040-01-556-7999. Performance will take place in Jacksonville, Florida. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems, CMMC Level 2, and JCP certification for handling export-controlled data. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 333995. The response deadline for this Department of Defense requirement is November 2, 2026.

General Info

Fabricate 22 linear actuating cylinders for DLA by November 2, 2026, in Florida.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L1-27-T-2176.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CYLINDER ASSEMBLY, ACTU

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates 22 linear actuating cylinders for prime contractors on DLA Weapons Support Land Supply Chain projects. Manufactures assemblies per Basic Drawing NR 30003 3221AS703 Rev A and TDP Rev A Gen 1. Requires SAE AS9003 or ISO 9001 quality systems, CMMC Level 2, and JCP certification for export-controlled data. Delivers completed and tested Linear Actuating Cylinder Assemblies (NSN 3040-01-556-7999).

Similar Contracts

Same NAICS industry code

Specialized Hydraulic and Electrical Component SupplyThis subcontract for the DLA Weapons Support Land Supply Chain involves the provision of high-precision internal components, specifically valves, seals, and actuators, to support prime contractors. The scope of work requires the delivery of certified component kits for five drive assemblies, with all materials adhering to strict DLA technical data certifications. Compliance is a critical aspect of this agreement, as all supplied components must meet Berry Amendment and Buy American requirements. Additionally, the contractor must ensure that all parts are free of intentionally added mercury compounds. Performance for this contract is centered in New Cumberland.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Mechanical Seal Seats (NSN 2010017008296)This subcontract involves the manufacture and supply of mechanical seal seats, specifically NSN 2010017008296, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The selected provider must ensure all items meet strict DLA technical specifications and Master List requirements, with packaging and marking conducted in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance of the contract will take place in New Cumberland. Compliance is mandatory regarding the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 cybersecurity standards. The contract falls under NAICS code 333999 and requires the delivery of physical mechanical seal seats. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Linear Actuating Cylinder Assembly ManufacturingThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, involves the precision machining, fabrication, and final assembly of two linear actuating cylinder assemblies. The work must be performed in accordance with government drawings and MIL-T-31000 standards to satisfy NSN 3040-01-370-5485 specifications. All components must be produced using CNC machining and materials that comply with the Buy American Act and the Berry Amendment. The project is designated as a Total Small Business Set-Aside under NAICS code 333995, with the place of performance located in Texarkana, Texas. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

Casting Tooling and Mold FabricationThis subcontract involves the supply and fabrication of casting tooling and molds for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the design and manufacture of molds specifically based on Reference Drawing NR 19207 12297008 Revision B, with the final deliverable being the completed casting tooling. Performance for this project is located in New Cumberland. To be eligible for this contract, providers must hold JCP certification to access necessary technical data and maintain CMMC Level 2 compliance for secure data handling. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 333995.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Hydraulic-Pneumatic Linear ActuatorsThis subcontract involves the supply of two hydraulic-pneumatic linear actuators for prime contractors under Department of Defense DLA supply contracts. The required units must match NSN 4810012604373 and Flowserve part number 3M0801C, with performance taking place in New Cumberland. The provider must ensure full supply chain traceability in accordance with DLAD Procurement Note C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E standards for marking and packaging. All deliveries must include the necessary quality documentation for these critical application units.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Air Cylinder Assembly Fabrication (NSN 3040011693672)This subcontract involves the manufacture and supply of 23 pneumatic air cylinder assemblies for the DLA Weapons Support Land Supply Chain. The assemblies must be fabricated according to NSN 3040011693672 specifications for use on laundry presses, with performance taking place in New Cumberland. The contractor is required to maintain strict compliance with the Buy American Act, the Berry Amendment, and mercury-free material restrictions. This project falls under NAICS code 333995 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Manufacturing of NSN 1720-00-593-3827 (SCALE)This subcontract involves the manufacture of 28 units of NSN 1720-00-593-3827 (SCALE) for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The project requires the fabrication of components according to specific technical data drawings and strict NAVAIR Aircraft Launch and Recovery Equipment traceability standards. Additionally, all units must be mercury-free in accordance with NAVSEA 5100-003D and delivered fully finished and marked. Performance will take place in San Diego, California, under NAICS code 333995. Due to the sensitive nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

Supply of Critical Application Solenoid Valves (P/N SV30T32P6T33)This subcontract through the Department of Defense DDSP New Cumberland Facility requires the manufacture or distribution of ten SV30T32P6T33 solenoid valves for prime contractors on DLA supply contracts. The specified valves must be normally closed, operate at 24/28 VDC, feature a 1.062–12.2B internal threaded boss with gasket type seal connections, and be rated for 3000 PSI. Successful bidders must provide manufacturer authorization and certification that the components meet Critical Application quality standards. All units must be packaged according to DLA standards and delivered to the performance location in New Cumberland. The response deadline for this requirement is November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

CYLINDER ATTACHMENT

Solicitation # SPE7L1-27-Q-0095

Solicitation SPE7L1-27-Q-0095, issued by the DLA Weapons Support Land Supply Chain, is a Firm Fixed Price procurement for one Cylinder Attachment, part number 2590-01-495-7221. The requirement specifies a delivery timeline of 111 days after order, with a customer required delivery date of June 25, 2026. The item is destined for a communication site in Kyoto, Japan, with both inspection and acceptance occurring at the destination. This is not a small business set-aside, and offerors must provide representations regarding the use of covered defense telecommunications equipment and prohibitions involving Chinese military companies. Technical compliance requires Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, though the DLA Master List of Technical and Quality Requirements and RP001 palletization standards take precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses covering counterfeit electronic part detection, safeguarding covered defense information, and prohibitions on certain internal confidentiality agreements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7L1-27-T-2176

Solicitation SPE7L1-27-T-2176 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 22 linear actuating cylinder assemblies (NSN 3040-01-556-7999). The contract requires delivery to DLA Distribution Jacksonville, Florida, with a need ship date of April 20, 2027, and an original required delivery date of July 28, 2027. Shipping is based on FOB Origin, utilizing the First Destination Transportation program. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance for inspection systems. Packaging must follow ASTM D3951 and RP001, with marking and labeling conducted per MIL-STD-129. Inspection and acceptance will occur at the point of origin under FAR 52.246-2. Key regulatory requirements include CMMC Level 2 certification, adherence to the Buy American Act and Berry Amendment, and strict export controls under ITAR and EAR. Additionally, the use of Class I ozone-depleting chemicals is prohibited. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

CYLINDER ASSEMBLY, AIR,

Solicitation # SPE8E5-27-Q-0037

Solicitation SPE8E5-27-Q-0037 is a firm-fixed-price request for five air cylinder assemblies for diving equipment, identified by NSN 4220-01-451-6470 and part number 4059311. The procurement is issued by the Defense Logistics Agency Troop Support Construction and Equipment office for delivery to the Naval Special Warfare Group 8 in Pearl City, Hawaii. The required delivery date is June 9, 2026, with a delivery timeline of 300 days after order. The items are designated as Type I Code S with a non-extendable shelf life of 60 months, necessitated by the requirement for periodic re-hydrotesting and valve overhauls. Technical compliance requires that all assemblies be oxygen cleaned and packaged in accordance with MIL-STD-1330E and MIL-STD-2073-1E, with specific mandates for opaque, waterproof, and greaseproof packaging to prevent ultraviolet ray deterioration. Marking must adhere to MIL-STD-129, including the contractor and manufacturer CAGE codes and part numbers. The contract prohibits the use of asbestos per FED-STD-313 and authorizes Certificate of Conformance procedures under FAR 52.246-15. Inspection and acceptance will occur at the destination. Payment will be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7L1-27-Q-0094

Solicitation SPE7L1-27-Q-0094 is a fixed-price procurement issued by the DLA Weapons Support Land Supply Chain for one Cylinder Tilt, part number 2590-01-495-7220, manufactured by Terex Cranes Germany GmbH. The item is to be delivered within 90 days after receipt of order to a freight shipping address in Kyoto, Japan. Both inspection and acceptance will occur at the destination. This procurement is not a small business set-aside and requires the contractor to use the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract mandates strict adherence to technical and quality standards, specifically requiring Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging must comply with ASTM D3951 and RP001 for palletization, while marking and labeling must follow MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM standards. Offerors must provide evidence of technical acceptability and traceability within two days if requested by the contracting officer. Key regulatory compliance includes SAM registration and various DFARS representations regarding cybersecurity, the Buy American program, and prohibitions on contracting with certain Chinese military-linked entities.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Preformed Packing O-Ring SupplierThis subcontract involves the supply of 185 preformed packing O-rings for the DLA Weapons Support Land Supply Chain. The contractor is responsible for manufacturing or sourcing the components to meet NSN 5331-01-128-4020 specifications, ensuring that all materials used are asbestos-free. Final delivery of the units is required at the designated location in New Cumberland, Pennsylvania. Strict adherence to military standards is mandatory, including packaging per MIL-STD-2073-1E and MIL-DTL-117 using waterproof, greaseproof, and opaque bags, with marking conducted according to MIL-STD-129. Additionally, the selected provider must maintain DFARS cybersecurity compliance to meet Department of Defense requirements.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Standardized Aerospace/Defense FastenersThis subcontract involves the supply of standardized aerospace and defense hardware components for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work focuses on the sourcing and delivery of certified standard fasteners that strictly adhere to specifications MS35771C, MS51968C, and NASM35338. To ensure quality and regulatory compliance, the provider must furnish Safety Data Sheets and certifications of conformance in accordance with FED-STD-313, while maintaining full adherence to the Buy American Act. The project is managed under NAICS code 332722 for the Department of Defense, with the place of performance located in Texarkana, Texas. Interested parties should note the response deadline of November 2, 2026, for this procurement effort.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Precision Metal Fabrication - Mounting Bracket AssemblyThis subcontract involves the precision metal fabrication of six mounting bracket components for the DLA Weapons Support Land Supply Chain. The work must be performed in accordance with Reference Drawing NR 19207 11671886, specifically Revisions B and C, while adhering to the DLA Master List of Technical and Quality Requirements. All deliverables must meet strict marking and labeling standards as defined by MIL-STD-129 and MIL-STD-130N. The project is based in Texarkana, Texas, and requires the contractor to maintain CMMC Level 2 certification and full ITAR/EAR compliance. Interested parties must submit their responses by November 2, 2026, to support these Department of Defense requirements under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract opportunity is for the provision of MIL-SPEC packaging and palletization services to support prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will be responsible for specialized marking, labeling, and packaging of hardware in strict accordance with ASTM D3951, MIL-STD-129, and RP001 standards. Work involves the use of MIL-SPEC labeling equipment and RP001 compliant materials, requiring a deep understanding of the DLA Master List of Technical and Quality Requirements to ensure all finished shipments are delivered correctly. The project is designated as a Total Small Business Set-Aside under NAICS code 488410 and will be performed in Barstow, California. Interested parties must respond by October 30, 2026, to provide these essential logistics and packaging services for the Department of Defense.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

Manufacturer of Headed Straight PinsThis subcontract opportunity is for the fabrication and supply of 47 headed straight pins to support prime contractors on DLA Weapons Support Land Supply Chain projects. The manufacturer must ensure all pins meet the technical data package for NSN 5315150288213, the DLA Master List of Technical and Quality Requirements, the Buy American Act, and the Berry Amendment. Performance will take place in Barstow, California. Eligible bidders must be small businesses, as this is a Total Small Business Set-Aside under NAICS code 332722. Compliance requirements include maintaining an SAE AS9003 or ISO 9001 quality system and adhering to DFARS 252.204-7012 cybersecurity standards. The response deadline for this Department of Defense requirement is October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and International Shipping ServicesThis subcontract for MIL-SPEC Packaging and International Shipping Services supports the DLA Weapons Support Land Supply Chain. The selected provider will perform specialized military-grade packaging, marking, and shipping for prime contractors, ensuring strict adherence to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. A key requirement of the project is the total avoidance of plastics for any wrapping or cushioning materials. The scope of work involves the delivery of two palletized units coordinated via FOB Origin shipping to destinations in Iwakuni, Japan, and Jacksonville, Florida. The units must be appropriately marked for both international and domestic transit. This opportunity falls under NAICS code 561910 and is managed under the Department of Defense.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Belt-Chain Tension Adjusting Device SupplierThis subcontract involves the supply of two belt-chain tension adjusting devices for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing devices that strictly adhere to NSN 2990-01-141-5776 specifications. The agreement requires full compliance with the DLA Master List of Technical and Quality Requirements (RA001) and the Buy American/Balance of Payments Program under DFARS 252.225-7001. This procurement is categorized under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Materials Testing Laboratory (Production Lot Test)This subcontract opportunity is for a Specialized Materials Testing Laboratory to perform Production Lot Testing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will execute tests according to procurement note E04 to verify the performance standards and material properties of torpedo components, with a specific focus on chemical testing for Otto Fuel compatibility. All work will be performed in Bremerton, Washington, and requires the delivery of formal test reports and certifications of compliance. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certifications and may require JCP certification to access necessary technical data. This requirement falls under NAICS code 541380. Interested parties must submit their responses by November 2, 2026.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

High-Performance O-Ring Supplier (Mark 46/48 Torpedoes)This subcontract involves the supply of 150 specialized O-rings, identified by NSN 5331-01-031-8287, to support prime contractors for the DLA Weapons Support Land Supply Chain, specifically for Mark 46/48 Torpedoes. The supplier is responsible for manufacturing the components to exact technical specifications to ensure full material compatibility with Otto Fuel. All items must be delivered to Bremerton and packaged in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, with labeling adhering to MIL-STD-129 and MIL-STD-130N standards. To qualify for this contract, the provider must hold JCP certification and maintain either SAE AS9003 or ISO 9001 quality management certifications. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026. This procurement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain. The project involves the specialized packaging, marking, and palletization of aerospace components for prime contractors on DLA supply contracts. All work must be performed in strict accordance with MIL-STD-2073-1E for packaging data, MIL-STD-129 for shipment marking, and RP001 for palletization, utilizing approved MIL-SPEC crates, cushioning, and moisture barriers. Final deliverables must be ready for shipment via WAWF. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 493110. Performance will take place in Tracy, California. Interested parties must submit their responses by November 2, 2026.

General Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Linear Actuating Cylinders (NSN 3040012687812)This subcontract opportunity, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, involves the manufacture and supply of two precision linear actuating cylinders for NSN 3040012687812. The selected provider must fabricate the cylinders in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements RA001. Performance will take place in Tracy, California, and the contract is specifically set aside for Service-Disabled Veteran-Owned Small Businesses. To qualify, contractors must possess precision machining equipment and maintain rigorous quality and security certifications, including SAE AS9003 or ISO 9001, DFARS 252.204-7012, and CMMC Level 2. The scope of work includes the delivery of packaged and marked cylinders. Interested parties must submit their responses by November 2, 2026.

Other Industrial Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors delivering supply contracts for the DLA Weapons Support Land Supply Chain. The scope of work involves the specialized marking, packaging, and palletization of 2,500 units destined for DLA Distribution DDSP New Cumberland. All operations must adhere to strict military and industry standards, specifically utilizing MIL-STD-129 for shipment marking, ASTM D3951 for non-hazardous commercial packaging, and RP001 standards for palletization. The project requires the use of MIL-SPEC marking equipment and materials compliant with ASTM D3951. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, for this Department of Defense requirement categorized under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS