Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing of NSN 1720-00-593-3827 (SCALE)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of 28 units of NSN 1720-00-593-3827 (SCALE) for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The project requires the fabrication of components according to specific technical data drawings and strict NAVAIR Aircraft Launch and Recovery Equipment traceability standards. Additionally, all units must be mercury-free in accordance with NAVSEA 5100-003D and delivered fully finished and marked. Performance will take place in San Diego, California, under NAICS code 333995. Due to the sensitive nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is November 2, 2026.

General Info

Manufacture 28 mercury-free scales for DLA by November 2, 2026, requiring CMMC Level 2.

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-27-T-0323.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCALE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures 28 units of NSN 1720-00-593-3827 (SCALE) for prime contractors on DLA Weapons Support Nuclear Reactor Program projects. Fabricates components per technical data drawings and NAVAIR Aircraft Launch & Recovery Equipment traceability requirements. Ensures mercury-free compliance per NAVSEA 5100-003D. Requires CMMC Level 2 and ITAR/EAR compliance. Delivers 28 finished and marked scale units.

Similar Contracts

Same NAICS industry code

Supply of Hydraulic-Pneumatic Linear ActuatorsThis subcontract involves the supply of two hydraulic-pneumatic linear actuators for prime contractors under Department of Defense DLA supply contracts. The required units must match NSN 4810012604373 and Flowserve part number 3M0801C, with performance taking place in New Cumberland. The provider must ensure full supply chain traceability in accordance with DLAD Procurement Note C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E standards for marking and packaging. All deliveries must include the necessary quality documentation for these critical application units.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

CYLINDER ATTACHMENT

Solicitation # SPE7L1-27-Q-0095

Solicitation SPE7L1-27-Q-0095, issued by the DLA Weapons Support Land Supply Chain, is a Firm Fixed Price procurement for one Cylinder Attachment, part number 2590-01-495-7221. The requirement specifies a delivery timeline of 111 days after order, with a customer required delivery date of June 25, 2026. The item is destined for a communication site in Kyoto, Japan, with both inspection and acceptance occurring at the destination. This is not a small business set-aside, and offerors must provide representations regarding the use of covered defense telecommunications equipment and prohibitions involving Chinese military companies. Technical compliance requires Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, though the DLA Master List of Technical and Quality Requirements and RP001 palletization standards take precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses covering counterfeit electronic part detection, safeguarding covered defense information, and prohibitions on certain internal confidentiality agreements.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7L1-27-T-2176

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

CYLINDER ASSEMBLY, AIR,

Solicitation # SPE8E5-27-Q-0037

Solicitation SPE8E5-27-Q-0037 is a firm-fixed-price request for five air cylinder assemblies for diving equipment, identified by NSN 4220-01-451-6470 and part number 4059311. The procurement is issued by the Defense Logistics Agency Troop Support Construction and Equipment office for delivery to the Naval Special Warfare Group 8 in Pearl City, Hawaii. The required delivery date is June 9, 2026, with a delivery timeline of 300 days after order. The items are designated as Type I Code S with a non-extendable shelf life of 60 months, necessitated by the requirement for periodic re-hydrotesting and valve overhauls. Technical compliance requires that all assemblies be oxygen cleaned and packaged in accordance with MIL-STD-1330E and MIL-STD-2073-1E, with specific mandates for opaque, waterproof, and greaseproof packaging to prevent ultraviolet ray deterioration. Marking must adhere to MIL-STD-129, including the contractor and manufacturer CAGE codes and part numbers. The contract prohibits the use of asbestos per FED-STD-313 and authorizes Certificate of Conformance procedures under FAR 52.246-15. Inspection and acceptance will occur at the destination. Payment will be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L1-27-Q-0094

Solicitation SPE7L1-27-Q-0094 is a fixed-price procurement issued by the DLA Weapons Support Land Supply Chain for one Cylinder Tilt, part number 2590-01-495-7220, manufactured by Terex Cranes Germany GmbH. The item is to be delivered within 90 days after receipt of order to a freight shipping address in Kyoto, Japan. Both inspection and acceptance will occur at the destination. This procurement is not a small business set-aside and requires the contractor to use the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract mandates strict adherence to technical and quality standards, specifically requiring Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging must comply with ASTM D3951 and RP001 for palletization, while marking and labeling must follow MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM standards. Offerors must provide evidence of technical acceptability and traceability within two days if requested by the contracting officer. Key regulatory compliance includes SAM registration and various DFARS representations regarding cybersecurity, the Buy American program, and prohibitions on contracting with certain Chinese military-linked entities.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Manufacture or Refurbishment of Pump Cylinders (NIIN 012294986)This subcontract involves the manufacture or refurbishment of nine pump cylinders (NIIN 012294986) for prime contractors supporting U.S. Navy projects under the Department of Defense. The selected provider must utilize precision machining equipment to fabricate or restore the cylinders in strict accordance with CAGE Drawing specifications and TDP Version 021. Administrative requirements include the submission of all necessary data and waiver requests through the Electronic Contractor Data Submission system. Additionally, the contractor must ensure full compliance with the Trade Agreements Act and the Buy American-Balance of Payments Program to successfully deliver the completed and inspected units.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Hydraulic Actuator Manufacturer/Refurbisher (NIIN 015441230)This subcontract opportunity with the Department of Defense, specifically the Navsup Weapon Systems Support Mech, involves the manufacture or refurbishment of hydraulic actuators under NIIN 015441230 for U.S. Navy projects. The selected contractor is responsible for fabricating components according to Technical Data Package Version 003 and ensuring all identification marking adheres to MIL-STD-130. The scope of work requires the use of precision machining and hydraulic assembly equipment to deliver fully completed and tested actuators. Interested parties must provide a CAGE code and, if operating as a distributor, must present OEM authorization. This requirement falls under NAICS code 333995. The solicitation was posted on October 22, 2026, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Electromechanical Actuator Overhaul and RFI RestorationThis subcontract for the Department of Defense and NAVSUP Weapon Systems Support involves the overhaul and RFI restoration of 106 electro-mechanical actuators. The scope of work includes the complete teardown, evaluation, repair, upgrade, testing, and inspection of units to ensure they meet original specifications. Contractors are required to perform mechanical and electrical repairs and conduct functional tests using precision calibration systems that comply with ANSI/NCSL Z540.3 standards. To qualify for this project, providers must hold ISO 9001 or SAE AS9100 certification. The final deliverables consist of 106 ready-for-issue actuators accompanied by comprehensive inspection reports. The solicitation was posted on October 22, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333995.

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

Manufacture of Vaneaxial Fan (CSI)This subcontract involves the manufacture of Vaneaxial Fan assemblies for prime contractors supporting Department of Defense supply contracts through the DLA Aviation office in Philadelphia. The scope of work requires the fabrication of fan blades and housing in strict accordance with specification 70361-03005-107, utilizing precision CNC machining and dynamic balancing to ensure operational integrity. Due to the nature of the components, the contractor must adhere to rigorous Critical Safety Item quality controls and maintain certification under AS/EN/JISQ 91000 Aerospace Quality Management Systems. The final deliverable is a completed Vaneaxial Fan assembly that meets all technical requirements outlined in the governing specifications.

Pa DLA Aviation At Philadelphia

POSTED

about 11 hours ago

DEADLINE

in about 21 hours

Request for Quotation (RFQ): Headworks Actuator Valve Upgrade Project

Solicitation # 2026-RFQ-061

The Gary Sanitary District is soliciting quotations under solicitation number 2026-RFQ-061 for the upgrade of five electric actuator assemblies at its Headworks facility in Gary, Indiana. The project involves replacing or upgrading three primary butterfly valve actuators and two main sluice gate actuators to improve operational performance, reliability, and specifically to increase the speed of opening and closing operations. The scope includes the supply of new actuators, position indication screens, controls, and all necessary mounting hardware and accessories. While the primary requirement is equipment supply, vendors are encouraged to include optional services for installation, electrical control integration, commissioning, and startup. Quotations must be submitted electronically via the OpenGov portal by November 16, 2026, at 12:00 PM. The District will evaluate awards based on technical suitability, cost, reliability, and overall value, noting that the lowest-priced bid may not necessarily be selected. Selected contractors must be able to complete the project within 60 days of the Notice to Proceed and maintain comprehensive insurance coverage, including Commercial General Liability of 1,000,000 dollars per occurrence and 2,000,000 dollars general aggregate. Proposals must include detailed technical specifications, manufacturer models, estimated lead times, warranty terms, and evidence of relevant experience with wastewater treatment plant equipment.

POSTED

DEADLINE

PARTS KIT, ACTUATOR,

Solicitation # SPE4A5-27-T-0440

Solicitation SPE4A5-27-T-0440 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of five actuator parts kits. The required items are identified by NSN 2915-00-722-0487 and Meggitt North Hollywood Inc part number 50617-2. Designated as critical application items, these kits must be produced in accordance with TDP Rev A Gen 1 and Reference QAP 13873 QAP-E01 Revision A. Delivery is required within 246 days after order, with terms set as FOB Origin and the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and security standards, including ISO 9001:2015 certification and a CMMC Level 2 self-assessment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while item unique identification is not required. Offerors must comply with the Buy American Act and the Berry Amendment, and all quotes must be submitted via the DIBBS system. Inspection and acceptance will occur at the destination. Invoicing and payment processing are to be managed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Metallic Hose Assemblies (NSN 4720-01-335-9631)This subcontract involves the supply of new manufactured commercial metallic hose assemblies for prime contractors working on Department of Homeland Security procurement projects. Specifically, the provider must supply part number 200029-2, identified by NSN 4720-01-335-9631, acting as an OEM or OEM-approved source. The scope of delivery ranges from 15 to 45 units of the specified assembly. To ensure quality and compliance, each delivery must include a signed Certificate of Conformance that details the nomenclature, manufacturer's part number, and date of manufacture. This requirement is managed under NAICS code 333995 for the Aviation Logistics Center. The response deadline for this opportunity is November 2, 2026.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

Supply of Push Switches (NSN 5930-00-053-4805)

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Plain Oil Seals (NSN 5330-00-485-0788)This subcontract involves the manufacture and supply of 128 precision-manufactured plain oil seals for the DLA Weapons Support Nuclear Reactor Program. The seals must be produced according to NSN 5330-00-485-0788 specifications using either precision machining or molding processes. Compliance with RA001 technical requirements and RP001 packaging standards is mandatory, and all non-accepted government identification must be removed in accordance with RQ011. The project is managed under the Department of Defense and requires delivery of the packaged seals FOB Origin. Performance will take place in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for DLA ShipmentsThis subcontract involves providing military-grade packaging, preservation, and marking services for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The scope of work requires the processing of 5,647 pipe plugs, ensuring they are cleaned, dried, and treated with preservative materials in accordance with industrial standards. All activities must strictly adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 specifications, utilizing MIL-SPEC crates and industrial marking equipment for FOB Origin shipment. The project is based in San Diego, California, and falls under NAICS code 488510. Interested parties should note the response deadline of November 2, 2026, for this specialized logistics and preservation effort supporting prime contractors.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Supply of Certified Corrosion-Resistant Steel StockThis subcontract involves the supply of certified corrosion-resistant steel raw material bars or billets to support prime contractors for the DLA Weapons Support Nuclear Reactor Program. The materials must strictly adhere to the chemical and physical properties outlined in MS27769C and SAE AS4842. To ensure quality and safety, the provider is required to deliver Mill Test Reports certifying the material composition and confirming the absence of mercury and Class I ozone-depleting chemicals. Managed under the Department of Defense, the project is categorized under NAICS code 331110 with the place of performance located in San Diego, California. Interested parties should note the response deadline of November 2, 2026, for this procurement of certified raw steel stock.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Corrosion-Resistant Steel Pipe PlugsThis subcontract involves the precision manufacturing of 5,647 pipe plugs for the DLA Weapons Support Nuclear Reactor Program. The scope of work requires the use of forging presses and CNC machining to produce components from corrosion-resistant steel, ensuring strict adherence to MS27769C Revision C and SAE AS4842 specifications. To maintain safety and environmental standards, the materials must be free of mercury and Class I ozone-depleting chemicals. The project is classified under NAICS code 332721 and is subject to Critical Application Item quality controls to ensure high-precision standards. Performance of the contract will take place in San Diego, California. The procurement process includes a response deadline of November 2, 2026, for the delivery of the finished pipe plugs to the prime contractors.

Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Refresh Processor Unit SupplierThis subcontract involves the manufacture or procurement of two Refresh Processor Units for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The units must strictly adhere to part number 5000-R-5520 and national stock number 1710-01-531-5479. Performance will take place in San Diego, with a focus on meeting rigorous technical and safety specifications. Key compliance requirements include adherence to NAVSEA 5000-003D mercury prohibitions and MIL-STD-2073-1E packaging standards. Additionally, the supplier must maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment. The response deadline for this opportunity is November 2, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Straight Flange-to-Hose Adapters

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging, marking, and transportation for electronic subassemblies delivered to the Defense Logistics Agency. The scope of work requires strict adherence to MIL-STD-2073-1E for preservation, MIL-STD-129 for marking, and DLA requirement RP001 for palletization, utilizing approved MIL-SPEC wrapping and cushioning materials. The contract is issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. All shipments are to be delivered FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 2, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Supply of Rockwell Automation Computer SubassembliesThis subcontract involves the procurement of 30 Rockwell Automation computer subassemblies, specifically NSN 7050-01-503-0278 (PN 1794-IB16), to support prime contractors delivering to the DLA Weapons Support Nuclear Reactor Program. All provided components must be new, free of intentionally added mercury, and strictly adhere to original equipment manufacturer technical specifications. The agreement requires full compliance with the Buy American Act, DFARS 252.225-7001, and the DLA Master List of Technical and Quality Requirements RA001. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Supply of Part Number 7018834376

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of High-Performance Window Seals (NSN 5330-00-097-1087)This subcontract involves the supply of 40 feet of high-performance specialized window seals, identified as NSN 5330-00-097-1087, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing or sourcing the material with full NAVAIR Aircraft Launch and Recovery Equipment traceability. Strict adherence to safety and material standards is required, specifically prohibiting the use of asbestos and mercury. All items must be marked according to MIL-STD-130N and packaged in waterproof, greaseproof, and opaque bags in compliance with MIL-DTL-117 and MIL-STD-2073-1E. The project falls under NAICS code 326220 and is managed by the Department of Defense, with the place of performance located in New Cumberland.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the final packaging, cushioning, and marking of four followers, ensuring that all bare items are correctly labeled with contract numbers, NAWC CAGE, and part numbers. All activities must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements. The project is managed under NAICS code 561910 for the Department of Defense. Completed items are to be delivered FOB Origin to DLA Distribution San Diego, with the place of performance located in San Diego, California. The response deadline for this opportunity is November 2, 2026.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS