Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LITMUS PAPER

Active
SPE2DH-26-T-5777Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

LITMUS PAPER, ACS, 30’S, identified by NSN 6640-01-485-6075, is procured under solicitation SPE2DH-26-T-5777 with a requirement for one package containing thirty individual units, each individually sealed in foil packets with a printed color chart for pH indication. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is protected from damage and that exterior shipping containers are suitable for safe transport at the lowest cost to the designated delivery point in APO, 96278-2060. The product must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each label must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The shelf life is strictly limited to eighteen months, with no more than three months having passed from the date of manufacture to the date of government delivery. Bidders must clearly state the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Additionally, the contract incorporates provisions for the removal of government identification from non-accepted supplies and confirms that covered defense information may apply. The solicitation closes on August 11, 2026, and delivery is required within twenty days of award.

General Info

Thirty foil-sealed pH litmus paper units, NSN 6640-01-485-6075, deliverable to APO 96278-2060 within 20 days, 18-month shelf life.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333248 - All Other Industrial Machinery ManufacturingView NAICS

Place of Performance

UNIT 2060, APO, AP, 96278-2060, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5777.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LITMUS PAPER
LITMUS PAPER,ACS,30'S
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DETERMINE PH VALUE,INDIV.IN FOIL PACKET
COLOR CHART PRINTED ON EACH PACKET
1 PG = 30 EA
UNIT OF ISSUE PACKAGE (30 EA/PG)
.
SHALL HAVE A SHELF LIFE OF 18 MONTHS.
NOT MORE THAN THREE MONTHS SHALL
HAVE ELAPSED FROM
SPE2DH-26-T-5777
SECTION B
DATE OF MANUFACTURE
TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
LABELS SHALL INCLUDE:
NSN
MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-485-6075 Quantity: 1 PG Purchase Request: 7017728578QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333248
New
Federal
Request for Quote (RFQ) for BEP Spare Part MAP5306 - Blower Assembly
Solicitation # 2031ZA26Q00110
The Request for Quote (RFQ) for BEP Part Number MAP5306, a Blower Assembly identified by Automatan Part Number ATN-49695 and model designations 5M-1500-R2 and 5M-1500-H, is issued to supply a critical component for a New Jogger in NS LEPE. The solicitation, identified by number 2031ZA26Q00110, was posted on August 4, 2026, with a firm response deadline of August 12, 2026, at 4:00 PM Eastern Time. Delivery must be made to the Bureau of Engraving & Printing located at 9000 Blue Mound Road, Fort Worth, Texas 76131, which is also the designated place of performance. The procurement falls under NAICS Code 333248 and is classified as a combined solicitation with no set-aside designation. The contracting authority is the Office of the Chief Procurement Officer within the Department of the Treasury, headquartered in Washington, D.C. Primary point of contact is Diane Rollins, reachable at Diane.Rollins@treasury.gov, with Naweed Nezam listed as the secondary contact. Interested parties must submit responses through the SAM.gov portal using the provided UI link.
Office Of The Chief Procurement Officer

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333248
New
DIBBS
TRAY, SAMPLE, AUTOMATED
Solicitation # SPE2DH-26-T-5746
The tray for automated analysis is a sterile, single-use product designed for rapid and accurate quantification of coliforms, E. coli, enterococci, Pseudomonas aeruginosa, and heterotrophic plate counts in laboratory settings. Each package contains 100 trays and is intended for use in microbiological testing procedures requiring high reliability and consistency. The product must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Labels must clearly display the NSN, manufacturer name and CAGE code, date of manufacture or expiration, and the contract or lot number to ensure traceability and compliance. The product is governed by specific technical and quality requirements identified under RA001, which references the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA requirements as outlined in RP001, and non-accepted supplies must have all government identification removed in accordance with RQ011. The NSN for this item is 6640-01-695-5838, and the solicitation number is SPE2DH-26-T-5746, issued by the Department of Defense under the Medical Supply Chain FSH. The delivery location is Fort Knox, Kentucky, with a 20-day ADO timeline, and the point of contact is Tina Vu, with details provided for email and phone. The NAICS code is 333248, indicating this falls under laboratory machinery and equipment manufacturing.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
LITMUS PAPER
Solicitation # SPE2DH-26-T-5736
The contract specifies the procurement of litmus paper in a commercial packaging configuration, with each unit individually sealed in foil packets and packaged in groups of 30 per page, designated as one unit of issue. All packaging must meet stringent commercial standards to ensure protection against damage and breakage during transit, with exterior shipping containers suitable for safe delivery by common carriers at the lowest cost to the specified delivery point. The product must comply with the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all labels must clearly display the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The material must have an 18-month shelf life, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Additionally, each foil packet features a color chart for pH indication, and bidders are required to identify the specific source and part number being offered. The item is governed under solicitation SPE2DH-26-T-5736, with a response deadline of August 10, 2026, and delivery required within 20 days of award. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contract also includes provisions for the removal of government identification from non-accepted supplies, while covered defense information may apply.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
Federal
Sewer Grinder Equipment Supply (Channel Monster Unit)The contract entails the supply of a new Channel Monster sewer grinder unit to meet specific technical requirements, ensuring full compliance with established performance and operational standards. The equipment will be provided with the manufacturer’s warranty, guaranteeing reliability and support post-delivery. The solicitation is issued under the Department of the Air Force as part of the Department of Defense, with the NAICS code 333248 indicating it falls under industrial machinery manufacturing. The opportunity is classified as a subcontract and has a response deadline of August 18, 2026, at 2:00 PM, with the posting date originally set for August 3, 2026. The place of performance is listed with a city identifier of 0, indicating the precise location has not been specified, and no point of contact or zip code information is provided in the available data.
Department Of The Air Force

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333248
New
Federal
Laser Cutter + Options
Solicitation # W911S226U3916
The contract solicitation W911S26U3916 seeks a laser cutter along with optional accessories under a Small Business Set Aside, exclusively open to small businesses as defined by the SBA. The action falls under NAICS code 333248, indicating a focus on industrial machinery manufacturing, and is managed by the Department of Defense through the W6QM Micc Ft Drum office located at Fort Drum, New York. The opportunity is posted as a combined solicitation, suggesting it may integrate multiple contracting methods to acquire the equipment and any selected add-ons. The place of performance is listed with a zip code of 71602, which may indicate delivery to a facility in Louisiana, though the city and state fields are unpopulated, requiring clarification on exact delivery logistics. Bids must be submitted by August 13, 2026, at 10:00 PM Eastern Time, with proposals reviewed under the federal acquisition regulations. Primary point of contact for questions and clarifications is William Graves, reachable at 870-540-3917 or william.d.graves14.civ@army.mil. No detailed technical specifications are included in the provided metadata, but the listing implies that vendors must respond with offerings that meet military-grade standards for precision, safety, and reliability in a defense environment. Interested parties should access the full requirements through the SAM.gov portal at the provided UI link, ensuring compliance with federal procurement procedures and small business certification requirements. The posting date of August 3, 2026, suggests this is a forward-looking solicitation allowing sufficient time for small businesses to prepare comprehensive responses including technical solutions, pricing, and delivery timelines.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333248
New
Federal
Deburring/Finishing Machine + Options
Solicitation # W911S226U3915
The contract solicitation W911S226U3915 seeks proposals for a Deburring/Finishing Machine along with associated options, issued under a Small Business Set Aside for total award, targeting small business concerns as defined by the SBA. The North American Industry Classification System code 333248 indicates this procurement is for industrial machinery manufacturing, specifically related to metalworking machinery. The solicitation was posted on August 3, 2026, with responses due by August 13, 2026, and is classified as a combined solicitation, meaning it may involve both purchase and service components. The offering agency is the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with the place of performance listed as 71602, though specific location details are not fully provided. Primary point of contact for inquiries is William Graves, reachable via phone at 870-540-3917 or email at william.d.graves14.civ@army.mil. The contract is managed under the Office of the U.S. Army located in Fort Drum, New York, and all submissions must comply with the small business set aside requirements, restricting eligibility to qualified small businesses. Interested parties must respond through the SAM.gov portal using the provided UI link before the stated deadline. The procurement does not indicate an estimated value or payment terms, but the emphasis on options suggests potential for additional equipment, accessories, or extended services beyond the base machine delivery.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333248
New
Federal
SV0222-26 DLP Printer
Solicitation # SV0222-26
Unicor is seeking a digital license plate printing system capable of producing full-color license plates using either UV-curable inkjet or thermal transfer ribbon technology, with the ability to print cyan, magenta, yellow, black, and customizable colors in a continuous indexing queue. The printer must handle reflective license plate sheeting on supply and take-up rolls with air-actuated expansion mandrels, accommodate both 12-inch automotive and 7-inch motorcycle plates, and support printing on blank, pre-marked, or pre-printed substrates with precise registration to cue marks. The system must include software for image processing, color management, database tracking of print jobs and shipments, data integration via templates, RIP processing, and comprehensive print management with a Windows-based interface. All software must operate on Windows 11 Professional/Enterprise with elevated privileges disabled, function entirely offline without external connectivity for licensing or updates, and support role-based access control. The system must generate randomized seven-character plate numbers in the format of one number, two letters, and four numbers, prevent duplicates across all produced plates, and enable batch synchronization with external systems via file transfer since no network connectivity is permitted. The printer must monitor a specified directory for automated job initiation via PDF file drops, allow multiple queued jobs during active printing, and operate at 600 dpi or higher with specified throughput rates at each resolution. Installation includes full hardware and software setup, calibration, quality control verification, and coordination with Unicor staff to comply with computer access restrictions. Onsite training at the Federal Correctional Institution in Cumberland, Maryland, must be provided for operators covering standard operation, maintenance, software configuration, and troubleshooting, with the option for additional training within six months. The vendor must clearly outline all included hardware and software accessories without hidden costs, provide a detailed warranty covering both manufacturer and third-party terms, disclose actions that void the warranty, and describe comprehensive post-warranty support including telephone, email, and onsite service with defined response times, availability hours, and associated labor and travel rates.
Dba Federal Prison Industries United States Department Of Justice

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 333248
New
Federal
Intent to Sole Source - Channel Monster Sewer Grinder
Solicitation # FA2835-1808
The Department of the Air Force, through the 66th Air Base Group Civil Engineering and AFLCMC/PZI, intends to award a sole source contract to JWC Environmental for the purchase of a new Channel Monster sewer grinder, including warranty coverage. This procurement is classified under NAICS code 333248 and is not subject to any set-aside provisions, indicating no preference is given to small businesses or other designated categories. The solicitation number is FA2835-1808, with the notice posted on August 3, 2026, and responses due by August 18, 2026. The equipment will be delivered and installed at a performance location in Massachusetts. Primary point of contact for inquiries is Jason Scales, with A. Patrick Coit listed as secondary contact, both reachable via official Air Force email addresses. Additional details are available in the attached NOCA, and more information can be accessed through the provided SAM.gov link.
Department Of The Air Force

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333248
New
DIBBS
PROBE, PH
Solicitation # SPE2DS-26-T-296A
The contract is for a low-maintenance, factory-filled, pre-pressurized pH probe designed for extensive use in biotechnology, pharmaceutical, and chemical process industries. Each unit is sold individually, with a total quantity of two units requested under purchase request 7017676043. The item is identified by NSN 6640-01-688-0401 and must be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The solicitation, numbered SPE2DS-26-T-296A, was posted on August 2, 2026, with responses due by August 10, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Goose Creek, South Carolina, 29445-8612. Primary point of contact is Olusola Emmanuel, reachable at olusola.emmanuel@dla.mil or 4457373766.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
TUBE, BIOLOGICAL CULTUR
Solicitation # SPE2DH-26-T-5705
The contract solicitation SPE2DH-26-T-5705 is for the procurement of 1,000 units of polypropylene biological culture tubes, each 12x75 mm in size with a 5 mL capacity, supplied sterile, autoclavable, and endotoxin-free, packaged in cases of 1,000 units (125 tubes per bag, eight bags per case). The product is identified by NSN 6640-01-705-0413 and must meet stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including RA001 for technical specifications and RP001 for packaging standards. Deliveries are due within 20 calendar days of award to FPO, 96694, with FOB Destination terms placing responsibility for transit risks on the contractor. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129 for medical items, and adhere to MIL-STD-2073-1E for packaging integrity, with commercial packaging suitable for common carrier transport and palletization as defined by DLA guidelines. Inspection and acceptance occur at the destination by the government, with compliance verified against quality, labeling, and documentation standards. The solicitation emphasizes automated award potential under a Lowest Price Technically Acceptable (LPTA) method and includes a HUBZone price evaluation preference, though no explicit evaluation factors or weighting criteria are detailed. Contractors must represent their small business status, UEI, and CAGE code, and address socioeconomic categories including HUBZone eligibility. Special requirements include compliance with hazardous material labeling under 252.223-7001, adherence to cybersecurity standards outlined in 252.240-7997 and 252.204-7016, and full implementation of FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and restrictions on forced arbitration. Invoicing is mandated through WAWF, with payment processed via designated DoDAACs tied to the award. The contract enforces strict prohibition on acquisition of items from Communist Chinese military companies and hexavalent chromium use, and requires adherence to DLA’s packaging, preservation, and marking standards without predefined materials, leaving those determinations to the contractor based on product sensitivity. Technical and quality compliance
MEDICAL SUPPLY CHAIIN FSH

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
PRESS, ARBOR, HAND OP
Solicitation # SPE8E5-26-T-3751
The contract pertains to the procurement of one hand-operated press arbor identified by NSN 3444-01-565-4432 under solicitation SPE8E5-26-T-3751, with a delivery requirement of 20 days after award. The acquisition is governed by DLA packaging and technical requirements referenced through the DLA Master List of Technical and Quality Requirements, where any R or I numbered provisions are binding and incorporate the latest applicable revision as of the solicitation issue date or award date, depending on the scale of the acquisition. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware or its direct contact, with exceptions permitting functional mercury in specific items such as batteries, fluorescent lights, instrumentation, sensors, controls, weapon systems, and chemical reagents explicitly authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier compliant with NAVSEA 5100-003D. The supplier must be procured from approved sources only, with full compliance expected on all technical, quality, and environmental control criteria. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the point of contact is Ira Hedgepeth at DLA, reachable via email and phone provided. The place of performance is designated as FPO with a ZIP code of 09565, and the procurement falls under NAICS code 333248 as a federal action managed by the Department of Defense through the Defense Logistics Agency.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 453998
New
DIBBS
STUDY CARD
Solicitation # SPE2DH-26-T-5772
The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
COMPARATOR, COLOR
Solicitation # SPE2DH-26-T-5767
The comparator is a color-matching device designed for use with COLILERT QUANTI-TRAY systems to distinguish between borderline positive and negative results through visual comparison of yellow fluorescence thresholds. It is a 51-well tray filled with a proprietary borderline yellow and fluorescing medium to ensure accurate interpretation of test outcomes. The item is identified by NSN 6630-01-506-2252 and is being procured under solicitation SPE2DH-26-T-5767 for a single unit, with delivery required within 20 days of award. The product is subject to strict shelf-life requirements, mandating a non-extendable 12-month lifespan from the date of manufacture, with no more than one month elapsed between manufacturing and government delivery. Labeling must adhere to the latest version of Medical Marking Standard No. 1, including clear indications of manufacture date, expiration date, and contract or lot number, replacing all prior references to MIL-STD-129. Packaging must comply with commercial standards, protect contents from damage, and ensure safe, cost-effective transport to Dover AFB, with all markings and packaging conforming to DLA’s specified medical packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List, includes provisions for handling covered defense information, and follows DLA packaging and removal guidelines for non-accepted supplies.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MOUTH BARRIER, MANIKIN,
Solicitation # SPE2DH-26-T-5774
The contract solicits a single package of fifty disposable adult-sized mouth barrier and lung bag combinations designed exclusively for CPR training purposes, compatible with the Prestan adult CPR training manikin. The item is identified by NSN 6910-01-708-2080 and must comply with DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is a package containing fifty units, with a total order quantity of five packages requested to be delivered within five days of award. The procurement is governed under the federal solicitation SPE2DH-26-T-5774, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 11, 2026, and a posted date of August 4, 2026. Delivery must be made to an FPO address with ZIP 96693, and all supplies must meet the requirement for removal of government identification if not accepted. Primary point of contact is Tina Vu, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, DEFIBRILLATOR
Solicitation # SPE2DH-26-T-5775
A 12VDC lithium battery with approximately 9.2 grams of lithium content is specified for use with Cardiac Science PowerHEART G5 AEDs, sold in units of each. The battery must be stored between 20°C and 30°C to maintain integrity and performance. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition scale. Packaging must comply with DLA procurement standards, and non-accepted supplies must have government identification removed. Covered defense information provisions may apply. The item is identified by NSN 6135-01-652-9622 with a quantity of four units required under purchase request 7017720173, and delivery is due within 20 days after award. The solicitation number is SPE2DH-26-T-5775, posted on August 4, 2026, with responses due by August 11, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA, with performance located in San Diego, California, and primary point of contact being Tina Vu at tina.vu@dla.mil.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325620
New
DIBBS
FLOSS, WAXED, DENTAL
Solicitation # SPE2DH-26-T-5773
The contract specifies the procurement of dental floss, waxed, nylon, 200 yards per roll, for military use under NSN 6520-01-500-1520, with a unit of issue as each and a requested quantity of 25 units. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, issued under SPE2DH-26-T-5773, requires bidders to clearly state the source and part number being offered and targets delivery within 84 days ADO to an APO address with ZIP 09227-0000. The purchasing agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact, and the solicitation closes on August 11, 2026, under NAICS code 325620 for manufacturing of dental appliances and equipment.
Toilet Preparation Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5770
The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5764
The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PANEL, MODULAR, MEDIC
Solicitation # SPE2DH-26-T-5769
The contract calls for two modular medical panels designed for primary care operations in field environments, each constructed from black Cordura nylon with MOLLE compatibility to allow seamless integration with existing military equipment systems. These panels provide organized, immediate-access storage for medical supplies and equipment used to manage sick call patients in operational settings, ensuring efficient triage and treatment capabilities in both fixed and temporary facilities. The item is identified by NSN 6530-01-518-0118, with a requirement for delivery within 20 days of award, and must fully comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including packaging and government identification removal standards. Bidders must clearly specify the source and part number being submitted, as this solicitation is issued under contract number SPE2DH-26-T-5769 by the Department of Defense’s Medical Supply Chain FSH, with performance located at Fort Bliss, Texas. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, under NAICS code 314910 for other textile product mills. Tina Vu of DLA serves as the primary point of contact for inquiries, and all submissions must adhere to DLA procurement and packaging directives applicable to the solicitation issue date, with no set-aside provisions specified.
Textile Bag and Canvas Mills

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5778
The product is a single-use, disposable heat therapy pad designed for instant and consistent pain relief through simple activation by squeezing and kneading. Made with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, it is safe for direct skin application and meets strict safety standards. Measuring 6 by 9 inches, each case contains 16 pads and requires storage at room temperature. The item is identified by NSN 6530-01-724-0439 with a procurement quantity of four cases under Purchase Request 7017729834, with delivery expected within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA regulations including removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DH-26-T-5778 on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense's Medical Supply Chain FSH, with performance at Hurlburt Field, Florida, and primary point of contact Tina Vu at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details