Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

LMR Coverage Testing and Validation

Active

State & Local

Response Deadline10/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for LMR Coverage Testing and Validation supports prime contractors on State of Maryland public safety projects managed by the Department of Information Technology. The scope of work involves performing critical signal testing and validation, including inbound and outbound signal strength measurements with a minimum of -90 dBm and ensuring 99 percent reliability in designated critical areas. Using spectrum analyzers and LMR test radios in accordance with NFPA 1221 standards, the contractor will also evaluate voice audio quality for DAQ 3.4. The project requires the delivery of a Final Coverage Test Report and a Validation Certification to confirm compliance. This opportunity falls under NAICS code 541380, with a response deadline of October 29, 2026.

General Info

LMR coverage testing and validation for Maryland public safety projects due October 29, 2026.

Agency

Maryland → DoIT - Dept Of Information Technology - Administration

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MD, USA

Set-Aside

NONE

Documents

This scope was carved out of BPM058271.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FC-192-26 – Maryland FiRST Coverage Improvement Program – In Building

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 07:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMaryland → DoIT - Dept Of Information Technology - Administration

ContactsNo contacts available

OfficeN/A

Organization / AgencyMaryland → DoIT - Dept Of Information Technology - Administration

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs signal testing and validation for prime contractors on State of Maryland public safety projects. Conducts inbound/outbound signal strength testing (min -90 dBm), validates 99% reliability in critical areas, and tests voice audio quality for DAQ 3.4 using spectrum analyzers and LMR test radios per NFPA 1221. Delivers Final Coverage Test Report and Validation Certification.

Similar Contracts

Same NAICS industry code

Third-Party Construction Materials Testing & Inspection

University of Massachusetts System

POSTED

about 8 hours ago

DEADLINE

Campus Consulting – Construction Materials Testing And Special Inspection Services

Solicitation # 20261026019

California State University, Chico

POSTED

about 13 hours ago

DEADLINE

MIL-STD Environmental Testing ServicesThe MIL-STD Environmental Testing Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves performing critical environmental qualification testing for prime contractors. The scope of work focuses on aircraft interior decontamination projects for the Joint Project Manager for CBRN Special Operations Forces. The selected provider will conduct chamber evaluations and environmental stress testing, utilizing temperature, humidity, and vibration chambers to verify equipment survival in austere environments. All testing activities must strictly adhere to MIL-STD-810H standards, with the final deliverable being comprehensive environmental qualification test reports. This opportunity falls under NAICS code 541380 and is designated for performance in Abell. The response deadline for this requirement is November 24, 2026.

POSTED

about 15 hours ago

DEADLINE

Specialized Aerospace Quality Inspection/Certification

Ok DLA Aviation At Oklahoma City

POSTED

about 15 hours ago

DEADLINE

in about 17 hours

AMS Designated Laboratory Meat Testing Services (ADL)

Solicitation # 12-1NTS-26-R-0002

The USDA Agricultural Marketing Service (AMS) is soliciting proposals under solicitation 12-1NTS-26-R-0002 to establish AMS Designated Laboratories (ADLs) for microbiological and fat testing of meat, poultry, egg, and aquatic products. This effort supports the National School Lunch Program and other federal nutrition assistance programs to ensure compliance with Federal Purchase Program Specifications. The government intends to award a Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a base period from April 1, 2027, through March 31, 2028, and four subsequent option periods, extending the total performance period to March 31, 2032. The contract has a guaranteed minimum of 10,000 dollars and a maximum ceiling of 15,000,000 dollars. This procurement is specifically set aside for Women-Owned Small Businesses (WOSB). Selected laboratories must maintain ISO/IEC 17025:2017 accreditation and utilize approved methods from FSIS MLG, AOAC, or AOCS. Key responsibilities include conducting analyses for Aerobic Plate Count, Total coliforms, Generic E. coli, and Salmonella, as well as providing sampling procedures and shipping supplies to vendors. Contractors are required to provide timely reporting of results, daily status reports, and statistical process control data. Proposals will be evaluated based on Best Value, considering technical capabilities, past performance with at least two references from the last five years, and price. All submissions must be uploaded in PDF format via WBSCM by the deadline of November 20, 2026.

POSTED

about 15 hours ago

DEADLINE

Granite Surface Plate Calibration and lapping - with Q&As

Solicitation # W519TC27QA007

Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping repair for granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center. The requirement is structured as a firm-fixed-price contract consisting of a base year from February 2, 2027, to February 1, 2028, with four subsequent option years, for a total potential duration of five years and six months. All work must be performed in accordance with ASME B89.3.7 and ANSI Z-540-1 standards, with calibrations traceable to NIST. The contract utilizes a hybrid pricing model where the annual inspection and calibration of all plates are firm-fixed-price lots, while lapping repairs are priced separately via an hourly labor rate and must be authorized by the Contracting Officer or COR. Estimated travel costs should be included in the firm-fixed pricing, though actual costs will be billed after service per Joint Travel Regulation rates. Deliverables include calibration stickers for each plate and a Service Acceptance Report submitted within three business days of completion. Offerors must submit their proposals by November 9, 2026, including a signed concurrence of the Scope of Work and documentation of their technical capabilities.

POSTED

about 15 hours ago

DEADLINE

B--METAGENOMICS & TRANSCRIPTOMIC SERVICES

Solicitation # 140G0226Q0145

Solicitation 140G0226Q0145 is a firm-fixed-price Blanket Purchase Agreement (BPA) issued by the USGS OAG Denver Acquisition Branch to provide next-generation sequencing (NGS) services for the Upper Midwest Water Science Center’s Michigan Bacteriological Research Laboratory. The scope of work includes shotgun metagenomics, whole genome sequencing (WGS), and RNA-sequencing (RNA-seq) to support research on bacterial pathogens, antibiotic resistance, and microbial ecology. The contract utilizes technologies such as Illumina, AVITI, Oxford Nanopore, and PacBio. The BPA has a total not-to-exceed value of $300,000.00 and a five-year period of performance from September 28, 2026, to September 27, 2031, with specific performance periods defined by individual call orders. This opportunity is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB). Award decisions are based on the most advantageous offer, where non-priced technical factors—specifically past performance, key personnel qualifications, and the capability to provide the required sequencing deliverables—are significantly more important than cost. Deliverables must meet strict quality standards, including a 75% quality score over 30 per sequencing run, and be delivered via secure FTP or external hard drive with comprehensive technical metadata. Payments are processed electronically through the Treasury’s Invoice Processing Platform (IPP), and the place of performance is located in Lansing, Michigan.

Ofc Of Acquisition Grants-Denver

POSTED

about 15 hours ago

DEADLINE

W684Q-264141 - Laboratory Testing - RFSO

Solicitation # WS5609648156

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5609648156 for laboratory testing services. This federal opportunity, identified as W684Q-264141, falls under NAICS code 541380 and specifies that the place of performance will be located in British Columbia, Canada. The solicitation was posted on October 27, 2026, with a response deadline set for November 4, 2026, at 7:00 PM. Interested parties may coordinate with the primary contracting authority, Nicki Arrieta, to facilitate their submissions.

Department of Public Works and Government Services

POSTED

about 22 hours ago

DEADLINE

Ultrasonic Rail Testing and Material CertificationThis subcontract for Ultrasonic Rail Testing and Material Certification involves providing independent third-party testing and certification services for prime contractors working on Maryland Transit Administration projects. The selected vendor must be an MTA-approved certified independent testing laboratory capable of performing 100 percent in-line ultrasonic testing across the full length of rails. This technical process requires the use of a computerized DAPCO 300 testing unit or an approved equivalent to ensure material integrity. The contractor is responsible for delivering formal certified test reports and certificates of compliance to verify that all rail materials meet the necessary standards. Interested parties must submit their responses by November 16, 2026, under NAICS code 541380.

Maryland Transit Administration

POSTED

DEADLINE

Concrete Field TestingThis subcontract opportunity involves providing quality assurance testing for prime contractors working on California Department of Transportation highway projects. The primary scope of work focuses on conducting field testing of concrete pours to verify strength and ensure strict adherence to mix compliance standards. The selected provider is responsible for delivering certified test reports to document these findings. To qualify for this engagement, the contractor must employ a certified ACI Grade 1 concrete field-testing technician. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on October 26, 2026. The project falls under NAICS code 541380.

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Laboratory Ventilation Testing and CertificationThis subcontract opportunity is for Laboratory Ventilation Testing and Certification to support prime contractors on San Francisco Unified School District facility projects. The selected provider will perform specialized testing and official certification of both new and existing bio-safety cabinets and laboratory fume hoods. Using smoke generators and airflow velocity meters, the contractor must verify proper containment and airflow, ultimately providing official certification labels and detailed reports for every unit tested. The project is managed by the San Francisco Unified School District Facilities Design and Construction Department and will be performed in San Francisco, California. Qualified bidders must possess certification authority recognized by local and California state agencies. The solicitation was posted on October 26, 2026, with a response deadline of November 12, 2026.

San Francisco Unified School District Facilities Design and Construction Department

POSTED

DEADLINE

Vehicle Compliance Testing & InspectionThe Vehicle Compliance Testing and Inspection subcontract involves providing essential legal testing and safety inspections for prime contractors delivering vehicles to School District 68 Nanaimo-Ladysmith in British Columbia, Canada. The scope of work includes conducting safety inspections, weight distribution checks, and legal compliance certifications from the point of initial receipt through final acceptance. These services must be performed using appropriate weigh scales and safety tools to ensure all requirements mandated by law under Section 3.3 are met. The selected provider is responsible for delivering all necessary inspection reports and certifications to verify compliance. This opportunity is categorized under NAICS code 541380 and is associated with the Province of British Columbia. Interested parties should note the response deadline of November 26, 2026.

School District 68 Nanaimo-Ladysmith

POSTED

DEADLINE

More opportunities from Maryland → DoIT - Dept Of Information Technology - Administration

Same awarding agency

FC0003791-DELL- SDAT (9) Power User Laptops- Developer Unit

Solicitation # BPM059502

POSTED

about 13 hours ago

DEADLINE

FC0003757-DELL-DNR FY27 Refresh- (3) Custom Machines for Applications Team Programmers

Solicitation # BPM059501

POSTED

about 13 hours ago

DEADLINE

Manufacturer’s Extended Warranty AdministrationThis subcontract for Manufacturer’s Extended Warranty Administration supports prime contractors on projects for the Maryland Department of Information Technology. The scope of work involves the provision and management of extended manufacturer warranties, specifically coordinating claims and repairs through authorized Dell channels using Dell ProSupport or equivalent manufacturer plans. The contract specifically requires the delivery of warranty certificates and contracts for 40 laptops and 30 docks. This procurement falls under NAICS code 811212 and is managed by the Maryland Department of Information Technology Administration.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

IT Hardware Installation and Training ServicesThis subcontract opportunity for IT Hardware Installation and Training Services involves the physical installation and configuration of Dell hardware for prime contractors supporting the Maryland Department of Information Technology. Work will be performed at 100 Community Place in Crownsville, Maryland, and includes the setup of laptops and docking stations, specialized hardware configuration, and the delivery of end-user training. The primary goal is to provide fully operational hardware systems and completed training sessions. The project falls under NAICS code 541513 and is managed by the Maryland Department of Information Technology Administration. While open to qualified providers, there is a preference for MBE certified contractors. Interested parties must submit their responses by the deadline of November 5, 2026.

Computer Facilities Management Services

POSTED

DEADLINE

Dell Laptop and Docking Station SupplyThis subcontract opportunity is for the supply of new and unused Dell hardware to support prime contractors working on Maryland Department of Information Technology projects. The scope of work involves the procurement and delivery of specific equipment, including Executive User 13 inch and Standard User 16 inch laptops, along with Dell Pro Thunderbolt 4 Docking Stations. To be eligible, the provider must be an authorized Dell reseller or distributor and is required to provide proof of delivery through packing slips and serial numbers for all units. The solicitation is managed by the Maryland Department of Information Technology under NAICS code 423430. Interested parties must submit their responses by the deadline of November 5, 2026. This contract focuses on the efficient delivery of hardware units to ensure the operational success of DoIT projects within the state of Maryland.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

FC0003715-DELL-Stock Machine Order #2

Solicitation # FC0003715

Solicitation FC0003715 is a fixed-price procurement issued by the Maryland Department of Information Technology to acquire new and unused hardware to replace antiquated systems. This opportunity is specifically limited to authorized DELL resellers who are Master Contractors under the Desktop Laptop and Tablet 2015 Master Contract BPO 060B5400007. Additionally, this is a Small Business Reserve procurement, meaning the award is restricted to certified small business vendors meeting the statutory requirements of the State Finance and Procurement Article and certified by the GOSBA Small Business Reserve Program. The procurement includes the purchase of five Executive User 13 inch machines and 35 Standard User 16 inch machines, both featuring Intel Core Ultra S Processors and Copilot+ PC labeling. Proposals must be submitted electronically via the eMaryland Marketplace Advantage system by November 5, 2026. Evaluation is based on the ability to provide the requested equipment and support, authorization from the manufacturer or distributor, the provision of an MSRP sheet, and a Mercury Affidavit where applicable. Key deliverables include a three-year basic hardware service warranty with advance exchange. Equipment must be delivered to Crownsville, Maryland, and the successful contractor must provide estimated ship dates and lead times. Invoices are to be submitted via email within ten days of delivery. The state reserves the right to adjust quantities based on available funding and requires pricing to remain valid for at least 30 days following the bid due date.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

IT Installation and Training ServicesThis subcontract for IT Installation and Training Services supports the Maryland Department of Information Technology by providing physical hardware installation and end-user training for prime contractors. The scope of work specifically involves the deployment of 10 Dell Pro 3 16 systems and their associated docks utilizing standard IT deployment tools. The primary deliverables include fully operational hardware systems and the successful completion of required training sessions. Eligible bidders must hold Minority Business Enterprise certification to qualify for this opportunity. The project falls under NAICS code 541513 and is managed by the Maryland Department of Information Technology Administration. Interested parties must submit their responses by the deadline of November 5, 2026.

Computer Facilities Management Services

POSTED

DEADLINE

Hardware Support and Warranty ProviderThis subcontract agreement establishes a partnership for hardware support and warranty services to assist prime contractors working on projects for the Maryland Department of Information Technology. The scope of work focuses on providing manufacturer-backed ProSupport Plus services, specifically ensuring next business day onsite support for a duration of one year. This coverage applies to ten specific units and requires the provider to hold valid manufacturer-authorized support certifications. The opportunity is managed by the Maryland Department of Information Technology Administration under NAICS code 811212. Interested parties must adhere to the timeline established by the posting date of October 26, 2026, with a final response deadline of November 5, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Dell Hardware SupplierThis subcontract opportunity is for a Dell Hardware Supplier to provide new and unused computing hardware and peripherals to prime contractors working on Maryland Department of Information Technology procurement projects. The specific equipment required includes Dell Pro 3 16 (P316260) XC TO Base units and Dell Pro Thunderbolt 4 Dock WD25TB4 peripherals. To be eligible, suppliers must maintain status as an authorized Dell reseller or distributor and are required to provide packing slips, delivery confirmation, and equipment serial numbers upon delivery. The solicitation was posted on October 26, 2026, with a response deadline of November 5, 2026. Falling under NAICS code 423430, this contract is managed by the Maryland Department of Information Technology Administration. Interested parties can find further details and submission guidelines through the official Maryland eMMA portal.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

FC0002789-R-DELL-DSCI -SOW- 10 New Users

Solicitation # FC0002789-R

Solicitation FC0002789-R is a Small Business Reserve procurement issued by the Maryland Department of Information Technology to replace antiquated hardware for a special unit. This secondary competition is strictly limited to Master Contractors under the Desktop Laptop and Tablet 2015 Master Contract BPO # 060B5400007 who are also certified small business vendors. The scope of work includes the procurement of 10 Dell Pro 3 16 units featuring Intel Core Ultra I5 processors, 16 GB DDR5 memory, and Windows 11 Pro, along with 5 Dell Pro Thunderbolt 4 Docks and various ProSupport Plus service packages including accidental damage and extended battery services. All equipment must be new and unused, and the selected vendor must be an authorized Dell reseller. Proposals must be submitted electronically via the eMaryland Marketplace Advantage system by November 5, 2026. Required documentation for a valid bid includes a screenshot of the Manufacturer's Suggested Retail Price, a Mercury Affidavit if applicable, and estimated shipping lead times. The state may also request a Letter of Authorization from the manufacturer. Award decisions will be based on the most advantageous proposal, considering price and the vendor's ability to provide the requested equipment and support services. Deliveries are to be made to Crownsville, Maryland, and invoices must be submitted via email with proof of delivery and equipment serial numbers.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

1Password Software License ProviderThis subcontract opportunity is for a provider to supply 1Password Management Platform software licenses to prime contractors working on projects for the Maryland Department of Information Technology. The selected provider must deliver active commercial off-the-shelf software licenses and all associated legal usage agreements, ensuring that the software is virus-free and compliant with necessary terms. A critical requirement for this contract is the provision of a Letter of Authorization from the 1Password manufacturer or an authorized distributor. The solicitation is categorized under NAICS code 541512 and has a response deadline of November 4, 2026.

Computer Systems Design Services

POSTED

DEADLINE

1Password Management Platfor

Solicitation # FC0003905

Solicitation FC0003905 is a fixed-price request for the procurement of the 1Password Management Platform, a cloud-based security software solution for the Maryland Department of Information Technology. The objective is to implement a centrally managed password manager to standardize secure credential storage across state agencies, thereby reducing cybersecurity risks associated with weak or reused passwords and protecting sensitive citizen information. This is a secondary competition limited exclusively to Master Contractors currently awarded under the Commercial Off-the-Shelf Software (COTS 2012) contract 060B2490021. Eligible bidders must submit their proposals through the eMaryland Marketplace Advantage (eMMA) system by November 4, 2026, at 10:00 AM. Required submission documentation includes a Letter of Authorization from the 1Password manufacturer or distributor and a screenshot of the Manufacturer's Suggested Retail Price. The award will be granted to a responsive and responsible Master Contractor offering the most advantageous price. The contract requires compliance with COMAR 21.05.13.06 and includes a specific Data Use Agreement for SaaS products. Invoicing must be submitted via email and include detailed taxpayer and contract identification, with one-time pricing billed within 30 days of acceptance and annual pricing billed on the anniversary of the contract start.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Asbestos, Mold, and Lead-Base Paint Testing Services for Community Housing Services

Solicitation # city-of-ocala-ITB--CHS-261190-2027

City Of Ocala — Purchasing

POSTED

CLOSED

Construction Materials Testing (Third Party)

City of Atlanta

POSTED

DEADLINE

Specialized Structural Testing (X-Ray/NDT)

City of Atlanta

POSTED

DEADLINE

Water Chemistry Analysis Services

Department of Environmental Protection

POSTED

DEADLINE

Third-Party Testing and Inspection

New Jersey Division of Property Management and Construction

POSTED

DEADLINE

Materials Testing & Special Inspections

Public Utilities

POSTED

DEADLINE

Geotechnical Engineering Services

POSTED

DEADLINE

Aggregate Sampling and Testing

Wood County, WI - Highway Department

POSTED

DEADLINE

Materials Testing Laboratory (Independent)

State of California

POSTED

DEADLINE

Environmental Testing and Analysis (Asbestos/Materials)

State of California

POSTED

DEADLINE

in about 1 month

Geothermal Thermal Conductivity Testing Agency

identified in the attached Statement of Work to furnish pricing to drill, log, and test a geothermal test well (thermal conductivity boring) to evaluate the local underground thermal properties, and geothermal yield potential

POSTED

CLOSED

Third-Party Material Testing Laboratory (Polypropylene)

MODOT SOUTHWEST DISTRICT

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS