This Government Contract opportunity from Department Of Defense was posted on August 1, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Low Cost Spiral Wound Hull that Supports Multiple Payloads

Awarded

N00014-22-C-2023Federal

Submission Closed08/01/2022, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541715

New

International

Silviculture Growth & Yield Modelling Specialist

POSTED

DEADLINE

Mental Health Screening Tool Array Design

COMRESSERVAUTH586 - Community Residential Services Authority

POSTED

DEADLINE

Thermal Performance & Dielectric Testing Laboratory

FA8611 Aflcmc Wauk F22

POSTED

DEADLINE

Clinical Trial Management (Phase I/II)

POSTED

DEADLINE

Biopharmaceutical Platform Design & Development

POSTED

DEADLINE

HERMES BAA CALL: Rotating Detonation Rocket Engine-Combined Cycle (RDRE-CC) Flight Demonstration

Solicitation # FA9300-20-S-0001-CALL-RDRE-CC

The Air Force Research Laboratory Rocket Propulsion Division is seeking innovative research and development to advance Rotating Detonation Rocket Engine-Combined Cycle propulsion systems from Technology Readiness Level 3 to TRL 6. This effort aims to culminate in a ground-launched, sounding-rocket-boosted flight demonstration to support future High-Speed Affordable Mass Munitions. The anticipated period of performance for awarded contracts is between 36 and 48 months. This is a two-step solicitation process under the HERMES Broad Agency Announcement. Step one requires the submission of a white paper by November 16, 2026, which must be limited to ten pages with an optional five-page technical appendix. Only offerors with high technical merit will be invited to step two to submit full technical and cost proposals. Due to the sensitive nature of the technology, detailed requirements are restricted to U.S. Government agencies and vetted contractors with an active Joint Certification Program registration and a valid CAGE code.

POSTED

DEADLINE

Solicitation # SN-27-0002

The Space Development Agency intends to issue a sole source, firm-fixed-price contract modification to SpaceX to maintain a satellite processing and integration facility in Santa Barbara, California. This facility is designed to accommodate up to 21 satellites and their associated dispenser hardware, providing essential services including post-transport functional testing, mechanical and electrical mating, and integrated payload stack encapsulation. The modification is expected to be awarded in December 2026 with an estimated value of 15,000,000 dollars, extending the period of performance for one year. This action is being taken under the authority of FAR 6.302-1, as SpaceX is identified as the only responsible source capable of satisfying the agency's requirements. This notice is for informational purposes and is not a request for competitive proposals.

FA2401 Space Development Agency Sda

POSTED

DEADLINE

L-PBF Development of ODS Alloys for Recording Methane/Oxygen Combustion Properties

Solicitation # 80NSSC27946801Q

The NASA Shared Services Center is seeking capability statements for a project focused on the laser powder bed fusion (L-PBF) development of oxide dispersion strengthened (ODS) and burn-resistant nickel-based alloys, including GRX-810, GRX-810+, and GRX-900. The scope of work involves advanced process development and parameter optimization using an EOS M280 system to achieve a relative density of 99.9 percent or higher. Key requirements include the production of test coupons and representative components, the supply of at least 600 kg of GRX-810 powder, and strict adherence to NASA-STD-6030 for mechanical validation. All deliverables must be shipped to the Marshall Space Flight Center in Huntsville, Alabama. This procurement is being conducted as a commercial items or services acquisition under FAR Part 12, with NAICS code 541715. NASA intends to issue a sole source contract to North American Manufacturing Pros LLC under FAR 12.102(a); however, the agency is requesting capability statements from other interested organizations to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications to the primary point of contact, Cara Craft, by October 22, 2026. The contract requires rigorous documentation, including real-time reporting of anomalies and full powder traceability certifications covering chemical composition and particle morphology.

NASA Shared Services Center

POSTED

DEADLINE

Prototype development for Battlefield Wound Infection Prevention and Treatment (BWI P&T) Barrier Combination

Solicitation # HT9427-26-R-E020

The Defense Health Agency Contracting Activity is seeking proposals for the development of a Battlefield Wound Infection Prevention and Treatment Barrier Combination prototype. This product must integrate a physical wound barrier with antimicrobial and antifungal properties to prevent systemic infections in combat scenarios. The project aims to advance the technology to a Technology Readiness Level of 7 or 8, requiring the development of a working prototype, the execution of human clinical trials, and the successful submission for FDA approval or clearance. The final product must be individual, compact, waterproof, and maintain sterilization, with a preference for packaging that allows one-handed opening in low-light environments. This effort is being conducted under the prototype Other Transaction Authority 10 U.S.C. 4022, meaning it does not follow standard FAR-based procurement. To be eligible, offerors must be nontraditional defense contractors, small businesses, or provide significant cost-sharing. The estimated period of performance is 48 months, divided into three objectives: prototype demonstration, clinical studies and regulatory submissions, and final FDA clearance. Proposals will be evaluated based on technical capability, management capability, and cost, with payments processed electronically via Wide Area Workflow. All clinical research must comply with Good Laboratory, Manufacturing, and Clinical Practices, and be approved by relevant Institutional Review Boards and the USAMRDC Office of Human and Animal Research Oversight.

Defense Health Agency

POSTED

DEADLINE

Request for Information – Prophylactic Platform for Medical Countermeasures

Solicitation # W911SR27SPPFC

The Department of Defense, through the Portfolio Management Executive for Chemical, Biological, Radiological and Nuclear Defense (PME CBRND) and the Accelerated Defense Pharmaceuticals (ADP) program, is issuing a Request for Information (RFI) under solicitation W911SR27SPPFC. The objective is to identify capable companies that can advance the development of prophylactic medical countermeasures (MCMs) using existing platform technologies. The program focuses on progressing these countermeasures through Phase I or Phase II clinical trials, with a goal of enabling interim fielding via Expanded Access Protocols or pre-Emergency Use Authorization. The anticipated period of performance is up to four years, with work primarily conducted at the contractor's facilities. Interested respondents must provide a comprehensive capability description, including technical approach, regulatory status with the FDA, cGMP manufacturing capabilities, and a development roadmap with rough order of magnitude cost estimates. Evaluation criteria for future selections will emphasize manufacturing process capability, product safety and efficacy, past FDA experience, and the plug-and-play nature of the platform across various pathogens. Submissions must be delivered as a single searchable PDF, featuring a specific cover page and a core capability description not exceeding four pages. All non-clinical and clinical data must be SEND and CDISC compliant, and manufacturing must adhere to cGMP standards to support an Investigational New Drug application through a Biologics License Application.

POSTED

DEADLINE

ARMY OPEN SOLICITATION (AOS)

Solicitation # W9128Z-25-S-A002

The Army Open Solicitation (AOS), solicitation number W9128Z-25-S-A002, is an indefinite open solicitation issued by the U.S. Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Digital Capability Contracting Center of Excellence. Its primary objective is to support all Army mission areas and maximize Army lethality by rapidly acquiring innovative commercial technologies, research and development solutions, and software acquisition pathway procurements. The AOS leverages a broad range of authorities, including FAR 6.102(d)(2), FAR 35.016 Broad Agency Announcements, and various 10 U.S.C. sections for prototypes and experimental procurements, as well as the Commercial Solutions Opening (CSO) process. Interested parties can engage through two primary methods: responding to Active Capability Gaps (ACG) or submitting proposals in response to specific Calls for Solutions. The award process generally follows a multi-phase approach consisting of a Solution Brief, a Live Pitch, and a final Solution Proposal. Evaluation is based on a hierarchy of Technical Merit, Viability, Feasibility and Desirability, and Schedule and Price. All submissions must be unclassified, and the government does not reimburse companies for costs incurred during the initial three phases of the solicitation process. Key administrative requirements include mandatory registration in the System for Award Management (SAM) and the use of the Wide Area Work Flow (WAWF) for invoicing. Security requirements mandate that all government data reside within the exclusive legal jurisdiction of the United States. Solution Briefs are strictly limited to five written pages in 12-point font or fifteen briefing slides and must be submitted as a single PDF document. While the overall AOS remains open in perpetuity until canceled, individual Calls for Solutions have specific, limited response windows.

W6QK Acc-Apg Contr Ctr

POSTED

DEADLINE

ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO)

Solicitation # W912CH-26-S-0001

The ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO), solicitation W912CH-26-S-0001, is a streamlined acquisition initiative authorized under DFARS Subpart 212-70. Its primary objective is to rapidly procure innovative commercial products, services, and non-developmental items to enhance the development, integration, and sustainment of ground vehicle systems. The program utilizes a multi-phased competitive process—consisting of solution briefs, presentations, and commercial solution proposals—to expedite the delivery of critical technologies. Awards may be structured as fixed-price or fixed-price incentive fee contracts, utilizing FAR Part 12 Commercial Procedures or non-FAR agreements such as Other Transaction Authority (OTA) and Cooperative Agreements. The scope of the CSO is broad and evolves through various Areas of Interest (AoIs) active through 2028. Key initiatives include the TIGER Readiness and Hackathon programs focused on supply chain resilience and advanced manufacturing for the Abrams Main Battle Tank's AGT 1500 engine, the FALCONS rapid prototyping effort for long-range sensors with an anticipated funding ceiling of 24 million dollars, and the procurement of Counter-Unmanned Aircraft Systems (C-UAS) detection and Mobile Camouflage Systems. Vendors must be registered in the System for Award Management (SAM) with a Unique Entity ID and a verified CAGE code. Evaluation is based on technical approach, performance schedule realism, and price affordability, with a strong emphasis on domestic sourcing compliance and adherence to quality standards such as ISO 9001 and AS9100.

W6QK Acc- Dta

POSTED

1 day ago

DEADLINE

in about 2 years

AI Contract Overview

The Office of Naval Research has awarded contract N00014-22-C-2023 to develop low-cost, high-quality carbon fiber composite unmanned underwater vehicle hulls using spiral winding technology. The project focuses on creating hull designs, internal housings, and payload deployment systems to improve cost-efficiency and assess technology maturity. Performance for this effort is based in Oakland, California. The project is structured into a base effort and three options. The base effort involves prototyping first-generation spiral wound hulls and associated systems, while Option 1 focuses on a second-generation prototype incorporating previous lessons learned. Option 2 entails investigating novel failure modes of the hulls and components, and Option 3 covers the development of an alternative payload deployment system.

General Info

Agency

Department Of Defense → Office Of Naval Research

Contract Value

$23,604,065

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

Place of Performance

Oakland, CA, 94606, USA

Set-Aside

NONE

Awardee

Hadal, Inc. CA 94606-5208 USA

Award Issued Date

08/01/2022, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 1

Award Notice

AwardedAug 1

Contract was awarded

Submission Closed

08/01/2022, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Office Of Naval Research

Contacts2 people available

OfficeARLINGTON, VA, 22203-1995, USA

Organization / AgencyDepartment Of Defense → Office Of Naval Research

Office AddressARLINGTON, VA, 22203-1995, USA

Contacts

Petersen Derek

contact@example.gov

Palmer Sean

contact@example.gov

Full Description

This effort will focus on using spiral winding technology to lower the cost of high-quality carbon fiber composite unmanned underwater vehicle (UUV) hulls. The contractor shall develop UUV hull designs and components suitable for spiral winding. In the Base effort the contractor shall develop and prototype the first generation spiral wound hulls, associated internal housings, and payload deployment systems to assess the technology maturity. In Option 1, the contractor shall develop and prototype a second-generation hull incorporating lessons learned from the previous work and asses the technology maturity. In Option 2, the contractor shall investigate novel failure modes of the hulls and internal components. In Option 3, the contractor shall develop and prototype an alternative payload deployment system.