Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Tennessee was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Machine Bolts

Closed
Z4438State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722
New
DIBBS
Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Supply of Socket Head Cap Screws (NSN 5305017060326)This subcontract involves the manufacture or procurement of 30 socket head cap screws, identified by NSN 5305017060326 and part number 3M1345-도BA, to support prime contractors on DLA Weapons Support ASC projects. The supplier must ensure all units adhere to DLA Master List requirements RA001, RP001, RQ011, and RQ017, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Once completed, the 30 packaged screws are to be delivered to the Naval Air Systems Command Central Kitting Activity. This effort is managed under the Department of Defense via the DLA Weapons Support ASC Supplier OEM Division, with performance centered in Orange Park, Florida.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Supply of Screw Thread Insert (NSN 5325-01-647-8996)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of a screw thread insert meeting NSN 5325-01-647-8996 specifications. The contractor is responsible for delivering one unit, ensuring that packaging adheres to MIL-STD-2073-1E Preservation Method 33 and marking complies with MIL-STD-129. Performance will take place at Camp Pendleton, California. The contract mandates strict adherence to domestic sourcing requirements per the Buy American Act and the Berry Amendment. Additionally, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171. Responses to this solicitation are due by November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Precision Machine Bolt Fabrication (NSN 5306015554678)This subcontract involves the fabrication of 609 specialized machine bolts under NSN 5306015554678 for the DLA Weapons Support ASC Commodities Division. All units must be produced according to Basic Drawing 19207 12419091 Revision C using precision machining equipment, with a strict prohibition on additive manufacturing. The contractor is required to ensure all materials are compliant with the Buy American Act and the Berry Amendment, and finished products must be packaged in accordance with MIL-STD-2073-1E. To be eligible, the provider must maintain CMMC Level 2 compliance and hold either an ISO 9001 or SAE AS9003 quality system certification. The project falls under NAICS code 332722 and will be performed in New Cumberland. Interested parties must respond by November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Supply of Self-Locking Hexagon Nuts (NSN 5310-01-723-0284)
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 12 days
NAICS: 332722
New
DIBBS
Supplier of Flat Washers (NSN 5310009143234)This subcontract involves the procurement of 2,000 flat washers, identified as NSN 5310009143234 and Part S8157N8-010, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with the DLA Master List of Technical and Quality Requirements. Delivery is required FOB Origin to Hill AFB, and the use of additive manufacturing is strictly prohibited. Compliance is mandatory across several critical standards, including MIL-STD-130N, MIL-STD-129, and ASTM D3951 for packaging. Additionally, the supplier must meet CMMC Level 2 cybersecurity requirements and adhere to the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026, under NAICS code 332722.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacturing of Flat Washers (NSN 5310-01-723-4415)This subcontract involves the manufacture of 202 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 5310-01-723-4415, Goodrich Corporation part number 80-835, and TDP Rev A Gen 1 specifications. Production requires the use of precision machining or stamping equipment and materials that comply with the Buy American Act. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling standards, with a strict prohibition on the use of hexavalent chromium. The final deliverable consists of 202 finished and inspected washers. The project is managed under NAICS code 332722 for the Department of Defense, with performance located in New Cumberland.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacturer of Pin-Rivet Collars (NSN 5320-01-177-3224)This subcontract involves the fabrication and supply of 869 Pin-Rivet Collars for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce the units according to NSN 5320-01-177-3224 technical specifications and adhere to DLA master list quality standards RA001, RC001, RP001, RQ011, and RQ017. Due to the nature of the components, the use of precision machining equipment is required, and all materials must comply with the Buy American Act. The completed units are to be delivered FOB Origin to the DLA Distribution Depot located at Tinker AFB, Oklahoma. This procurement falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332722
New
DIBBS
Manufacture of Self-Locking Hexagon Nuts (NAS1022A12)This subcontract involves the manufacture of 667 self-locking hexagon nuts, specifically part number NAS1022A12, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. All parts must be produced via precision machining in strict accordance with the current NAS1022 part standard, and the use of additive manufacturing is explicitly prohibited. Performance will take place at Hill AFB. The contractor must ensure full compliance with the Buy American Act and implement rigorous quality control measures. Inspection systems must meet SAE AS9003 or ISO 9001 standards, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

This contract solicits the supply of machine bolts with specific requirements including a 1-inch diameter and 14-inch length, with a minimum threaded portion of 6 inches. Each bolt must be equipped with both a hex nut and a pal nut, which must be pre-threaded onto the bolt. The bolts are to be manufactured from high-strength steel, meeting Grade A325 or A449 standards, and must be hot-dipped galvanized according to ASTM A153 to ensure corrosion resistance. The contract specifies approved manufacturers and part numbers to ensure product compliance. The solicitation, titled "Machine Bolts," is issued by the Nashville Electric Service under the Tennessee state government. It was posted on May 7, 2026, with a response deadline of May 12, 2026. The contract does not specify any set-asides or NAICS codes. Interested vendors are instructed to submit bids to the designated procurement contact, Tiffany Caruthers, and can access further details and submit proposals via the provided vendor portal link. The work will be performed in Nashville, Tennessee.

General Info

Supply of 1-inch diameter, 14-inch hot-dipped galvanized steel bolts with pre-threaded nuts.

Agency

Tennessee → Nashville Electric Service

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

RFB Z4438 - Machine Bolt Procurement for NES

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT MACHINE 1 X 14 MACHINE BOLT; 1" DIAMETER, 14" LENGTH MINIMUM THREADED DISTANCE SHALL BE 6". BOLT MUST INCLUDE HEX NUT AND PAL NUT WHICH MUST BE THREADED ONTO EACH BOLT. GRADE A325 OR A449 HIGH STEEL. HOT DIPPED GALVANIZED TO ASTM A153. Approved Manufacturers and/or Part Numbers: SPSUTILSPS-S100224-A449-500 MVAPOWEHMB0114-A449+PN STLCTY1"X14"MACHINEBOLT ALLIEDB65800 HUGHESBAB1014-6-PL100

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
Closed
SLED
Precision Machining of Steering Column Components
Dallas Area Rapid Transit

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
146022 SPACER, OPEN WIRE
Solicitation # 229734
Water & Power

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Bolt & Nut Bag
Solicitation # Z4341
Nashville Electric Service

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Supply of Fasteners (Bolts, Nuts, Screws) and Storage Bin Systems
Solicitation # 2026-IFB-MS-0211
Public Works Department, BSFMD

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Tapcon Anchor
Solicitation # Z4318
Nashville Electric Service

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Nut Silicone Bronze
Solicitation # Z4307
Nashville Electric Service

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Double Arming Bolt
Solicitation # Z4310
Nashville Electric Service

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Carriage Bolts and Washer, Square Flat
Solicitation # Z4295
Nashville Electric Service

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Awarded
SLED
BOLT HEX M18X 1.5X120 10.9 -REF 2097658
Solicitation # 2097658 [MD]
Dallas Area Rapid Transit

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Closed
SLED
Machine Bolts
Solicitation # Z4286
Nashville Electric Service

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 332722
Awarded
SLED
393-3 U-bolt kits
Solicitation # EP536876
Department Of Transportation

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
SLED
BOLT,5/8"-11 X 1 1/4",GRADE 8 | 2098691
Solicitation # 2098691
Dallas Area Rapid Transit

POSTED

7 months ago

CLOSED

6 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS