Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

MACS LAP M231/M232 Type Bridge J&A

Active
W15QKN-23-Z-0S5IFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Contracting Command-New Jersey intends to issue sole source, firm fixed price modifications to existing contracts for the production of Modular Artillery Charge Systems (MACS) Load, Assemble, and Pack M231/M232 Type charges used in 155mm artillery. The MACS includes two solid propellant charges, the M231 for low-zone firing and the M232-series for high-zone firing, designed to provide a complete zoning solution compatible with all current 155mm field artillery weapons. These modifications will be issued under contracts awarded to American Ordnance in Iowa and General Dynamics – Ordnance and Tactical Systems in Florida, increasing the combined contract ceiling by over $430 million, from approximately $133 million to $563 million. The action is authorized under the sole source provision given that only these suppliers can meet the government’s needs, driven by the urgent demands of the Presidential Buyback effort. Funding is confirmed as available, and although the notice is not a solicitation or request for proposal, the anticipated award is planned for the third quarter of Fiscal Year 2023. Point of contact for this procurement is Amy Kirzow, and no telephone inquiries will be accepted. The procurement supports the Department of Defense’s ongoing efforts to ensure readiness and capability enhancement through these specialized artillery charge systems.

General Info

Sole source modifications increase $430M contract for 155mm artillery Modular Artillery Charge Systems.

Agency

Department Of Defense → W6QK Acc-Pica

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

NJ

Set-Aside

NONE

Documents

1

FINAL+REDACTED+JA+Ukraine+Replenishment+MACS+Programs.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
Posted

special-notice

Notice updated

The point of contact changed.

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
Contacts2 people available
OfficePICATINNY ARSENAL, NJ, 07806-5000, USA
Organization / AgencyDepartment Of Defense → W6QK Acc-Pica
Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA
Contacts
Amy Kirzow
contact@example.gov
Jennifer Hughes
contact@example.gov

Full Description

Show more
The U.S. Army Contracting Command-New Jersey (ACC-NJ) Picatinny Arsenal, NJ 07806-5000, on behalf of the Office of the Project Manager for Combat Ammunition Systems (PM-CAS) intends to issue Sole Source, Firm Fixed Price (FFP) modifications under the current contracts for the production of Modular Artillery Charge Systems (MACS) Load, Assemble, and Pack (LAP) M231/M232 Type for the 155mm Propelling Charge. The MACS consists of two solid propellant charges, the M231 (low-zone) and the M232-series (high-zone), and their associated packaging. The charge system provides a complete zoning solution for the 155mm artillery applications by using multiples of the basic modules. The bottom-charge M231 is fired either singly (Charge-1) or in pairs (Charge-2) from all cannon systems. The top-charge M232-series is fired in multiples of 3, 4 or 5 in currently fielded weapon systems. The system is compatible with all current 155mm field artillery weapons. The modifications shall be issued under current contracts W15QKN-19-D-0109 with American Ordnance (AO) (Middletown, Iowa) and W15QKN-19-D-0110 with General Dynamics - Ordnance and Tactical Systems (GD-OTS) - Niceville (Niceville, FL). These modifications will increase the contract ceiling by $430,416,974.58, FROM: $133,212,118.80 TO: $563,629.093.38, combined. These modifications will be issued under the authority of 10 U.S.C. 3204(c)(1); as implemented by FAR 6.302-1(a)(2)(ii)(B)-Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. These modifications are a result of the surge in requirements to support the Presidential Buyback effort. Appropriate and available funds are available for this acquisition. Please note the intent of this notice is not a request for a formal Request for Proposal (RFP), nor is the Government obligated to issue an RFP. The anticipated award for this action is Fiscal Year 2023, Quarter 3 (FY23Q3). Telephone inquiries will not be accepted. The point of contact for this requirement is Amy Kirzow, ACC-NJ via e-mail: amy.e.kirzow.civ@army.mil.

Similar Contracts

Same NAICS industry code

NAICS: 332993
New
Federal
Electronic Safe and Arm Devices (ESAD)
Solicitation # W15QKN27A9999
W6QK Acc-Ri-Picatinny

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332993
New
Federal
Massive Ordnance Penetrator Contractor Logistics Support Follow-On
Solicitation # FA8681-27-R-MOPCLS
FA8681 Aflcmc Ebd

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 332993
New
Federal
RING,CLAMPING
Solicitation # N0010427QNA06
This fixed-price solicitation, issued by NAVSUP Weapon Systems Support, is a total small business set-aside for the manufacture of Clamping Rings (NSN 1350-01-671-1961). The requirement is designated as DPAS DO-rated for national defense and is being processed under Emergency Acquisition Flexibilities. The contract includes a base quantity with an option for the government to increase the order by up to 100% within 365 days of award. Award will be granted to the responsible offeror providing the lowest aggregate total price that is deemed technically acceptable. Technical compliance requires adherence to drawing 6964634 and ISO 9001 quality standards. Key mandates include a strict mercury-free requirement for use on submarines and surface ships, as well as physical identification per MIL-STD-130. The quality assurance process necessitates the delivery of one unit each for non-destructive First Article Testing and Production Lot Testing at the Naval Undersea Warfare Center Division Newport. Deliverables must be preserved and marked according to MIL-STD-2073-1 and MIL-STD-129, with a delivery timeframe of 437 days. Payment and receiving reports are to be processed electronically via the Wide Area Workflow system.
Navsup Weapon Systems Support Mech

POSTED

4 days ago

DEADLINE

in 20 days
View Details
NAICS: 332993
New
Federal
Precision Metal Fabrication - Ammunition Holder (NSN: 1398-01-330-9529)This small business set-aside subcontract involves the full-scale production and manufacturing of Ammunition Holders, part number 12916856, for prime contractors supporting Army Contracting Command-Detroit Arsenal projects. The selected provider will be responsible for manufacturing three units, with the possibility of additional options, utilizing CNC machining, welding, or forming in strict accordance with the provided Technical Data Package. To qualify, contractors must maintain a certified Quality Management System, specifically ISO 9001 or AS9100 certification, and must possess JCP registration and DD 2345 authorization. The scope of work includes the execution of First Article Testing to ensure all components meet the rigorous standards required by the Department of Defense.
W6QK Acc- Dta

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 332993
New
Federal
Sources Sought for Market Research, Holder, Ammunition NSN: 1398-01-330-9529
Solicitation # W912CH-27-Q-A004
The Army Contracting Command-Detroit Arsenal (ACC-DTA) has issued Sources Sought Notice W912CH-27-Q-A004 to conduct market research for the production of Ammunition Holders (NSN: 1398-01-330-9529, Part No: 12916856). This is not a formal solicitation for proposals but a planning effort to determine the capabilities and interest of both small and large businesses. The estimated quantity is 3 units with a 100 percent option. The effort is categorized under NAICS code 332993 and is designated as a Total Small Business Set Aside. Interested respondents must submit a completed survey to Haley Bruns by October 29, 2026. The submission must include a vendor profile, details on quality management systems, production lead times, and unit pricing. Access to the associated Technical Data Package (TDP) is restricted to Department of Defense contractors with a current DD 2345 certification on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. First Article Testing is required for this procurement. All proprietary information submitted must be clearly marked as confidential to be protected under 18 USC 1905.
W6QK Acc- Dta

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 3 days
View Details
NAICS: 332993
Federal
Vehicle Recompete: THIS PROCUREMENT IS FOR THE MANUFACTURE, TEST, PACKAGING, AND DELIVERY OF… — INDEFINITE DELIVERY / INDEFINITE QUANTITY W15QKN22R0008This Department of the Army indefinite delivery, indefinite quantity contract covers the manufacture, testing, packaging, and delivery of 155mm M1128 artillery metal parts assemblies, which serve as high explosive carriers. The vehicle is a full recompete with an ordering period extending through April 12, 2028. Currently, there are seven active task orders with a combined total value of over 418 million dollars. The contract is split between two primary incumbents, General Dynamics Ordnance and Tactical Systems Inc and IMT Defense Corp, who hold awards valued at approximately 211 million and 206 million dollars respectively. A significant portion of the contract value is dedicated to supporting the conflict in Ukraine and replenishing Army stockpiles, including a major order for over 151,000 metal parts. Other key activities include the production of projectile metal parts, base closures, and initial first article testing.
Department of the Army

POSTED

9 days ago

DEADLINE

N/A
View Details
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

19 days ago

DEADLINE

in about 2 months
View Details
NAICS: 332993
Federal
13--RING,CLAMPING
Solicitation # N0010425QNC18
Solicitation N00104-25-Q-NC18 is a total small business set-aside issued by NAVSUP Weapon Systems Support for the procurement of three clamping rings (NSN 1350-01-671-1961). The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The contractor must manufacture the items according to Technical Data Package version 006 and drawing 6964634. Key technical mandates include a strict mercury-free requirement for use on submarines and surface ships, physical identification per MIL-STD-130, and a quality system compliant with ISO 9001. The contract requires both First Article Testing and Production Lot Testing, both of which are non-destructive and conducted by the government at Naval Station Newport. Delivery is set for 400 days after award with a destination of DLA Distribution New Cumberland, Pennsylvania. Packaging must adhere to MIL-STD-2073 and MIL-STD-129. Award will be made to a single responsible offeror based on a best-value determination where past performance is weighted as more important than price. Payment will be processed electronically through the Wide Area Workflow system.
Navsup Weapon Systems Support Mech

POSTED

27 days ago

DEADLINE

in 2 days
View Details
NAICS: 332993
Federal
M82 Energetics
Solicitation # W519TC-27-R-AM82
The Army Contracting Command Rock Island is seeking proposals for the supply of M82 Energetics Parts, specifically Booster Bursters, Delay Assemblies, and Slider Assemblies, to support the M82 Program at Pine Bluff Arsenal. This anticipated procurement will be a five year, firm fixed price, indefinite delivery indefinite quantity contract awarded to the responsive and responsible lowest priced technically acceptable proposal. Estimated quantities over the life of the contract range from a minimum of 65,000 units to a maximum of 90,000 units for each primary component, including corresponding first article testing units. The minimum guarantee will be obligated through the first delivery order issued alongside the base contract. This opportunity is open for competition with no specific set aside.
W6QK Acc-Ri

POSTED

28 days ago

DEADLINE

N/A
View Details
NAICS: 332993
Federal
Vehicle Recompete: M734A1/M783 Fuzes — IDIQ M734A1/M783 FuzesThis Department of Defense indefinite delivery, indefinite quantity contract covers the manufacture and delivery of M734A1 Multi-Option Fuze for Mortars and M783 PD/Dly fuzes. These components are utilized for 60mm, 81mm, and 120mm high explosive cartridges, as well as 60mm and 120mm white phosphorous smoke cartridges. The contract vehicle has a total ceiling value of 223,842,949.01 dollars and is scheduled to remain active through March 20, 2028. L3Harris Fuzing and Ordnance Systems, Inc. is the sole incumbent, holding six orders that account for the full value of the contract ceiling. Major task orders include the purchase and assembly of both fuze models, with the largest single order valued at over 86 million dollars. This procurement was conducted as a full recompete with no set-aside restrictions.
Department of Defense

POSTED

about 1 month ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 493190
Federal
Packaging, Preservation, and Marking (PP&M) ServicesThis contract involves the provision of packaging, preservation, and marking services in strict compliance with military standards, requiring that all items be prepared for shipment to Picatinny Arsenal or Foreign Military Sales destinations using MIL-STD-130 compliant UID marking, corrosion protection methods, and military-grade packaging protocols. The work encompasses full containerization to ensure safe, secure, and traceable transport of sensitive defense equipment and components throughout the logistics chain. The contract is classified as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the W6QK Acc-Pica office. It was posted on June 25, 2026, and requires full adherence to U.S. military logistical and identification standards without exceptions, emphasizing durability, traceability, and environmental protection during storage and transit. All deliverables must meet stringent defense logistics requirements to support operational readiness and international defense partnerships.
Other Warehousing and Storage

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Federal
Weapon System Testing and Quality Assurance (QA) ServicesThe contract pertains to comprehensive independent testing and quality assurance services for a weapon system, encompassing First Article Inspection, live-fire endurance evaluations, accuracy and dispersion measurements, environmental resistance testing, and full compliance verification against military standards. These activities are critical to ensuring the system meets rigorous performance, durability, and reliability requirements before field deployment. The work is structured as a subcontract under the Department of Defense, with the contracting office identified as W6QK Acc-Pica, and the North American Industry Classification System code 541380 indicates specialized engineering and technical services. Performance location details are unspecified, and no set-aside provisions or small business preferences are indicated, suggesting the opportunity is open to qualifying firms regardless of size or affiliation. The solicitation was posted in June 2026, and all testing must align precisely with defined military protocols to validate functional integrity under operational conditions.
Testing Laboratories and Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Barrel Forging and Rifling ServicesThe contract involves the manufacturing and processing of M240B machine gun barrels to exact military specifications, encompassing forging, rifling, chambering, and stress-relieving operations to ensure superior accuracy, heat resistance, and durability under sustained fire conditions. All work must meet stringent defense standards for performance and reliability, with the finished barrels intended for military use in high-demand operational environments. The service is classified as a subcontract under NAICS code 332212, linked to the Department of Defense and administered by W6QK Acc-Pica. The solicitation was posted in June 2026, with no set-aside provisions specified. While specific performance location and point of contact details are not provided, the work is expected to be carried out by a qualified industrial partner capable of delivering precision-engineered barrels consistent with military-grade requirements for longevity and combat readiness.
Hand and Edge Tool Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332721
Federal
Precision Machined Fire Control Group ComponentsThe contract entails the precision manufacturing of critical fire control components including trigger housing, sear, hammer, and disconnector, produced through advanced CNC machining, controlled heat treatment, and specialized surface finishing to ensure adherence to stringent military durability and reliability standards. These components must meet exacting tolerances and performance benchmarks required for high-stress operational environments, with process controls in place to guarantee consistency and traceability across production batches. The work is classified as a subcontract under NAICS code 332721, issued by the Department of Defense through the W6QK Acc-Pica office, with the opportunity posted in June 2026. While the place of performance and point of contact details are unspecified, the nature of the project implies a requirement for certified manufacturing facilities capable of handling defense-grade materials and complying with federal quality and security protocols. Production must align with the rigorous expectations of military-grade equipment, ensuring functionality under extreme conditions without compromise.
Precision Turned Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
M240B Machine Gun Final Assembly and IntegrationThe contract entails the final assembly, integration, and configuration of M240B machine guns strictly in accordance with U.S. military specifications and the FN Herstal Technical Data Package. This work includes comprehensive quality assurance protocols, mandatory test firing to verify functionality and reliability, and full compliance with First Article Inspection requirements to ensure all components meet rigorous performance and dimensional standards. All processes must be executed with precision to guarantee operational readiness and consistency with authorized military hardware. The subcontract is classified under NAICS code 332999 and is issued under the Department of Defense through the W6QK Acc-Pica office. The work will be performed in accordance with federal defense contracting requirements, though specific performance location and contact details are not provided. The solicitation was posted on June 25, 2026, and remains active for qualified subcontractors seeking to support defense manufacturing efforts. Participation requires demonstrated capability in small arms final assembly, adherence to technical data packages, and established quality control systems verified through military inspection processes.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Rapid Response and Prototyping Process DevelopmentThis subcontract under the Department of Defense, managed by W6QK Acc-Pica, focuses on the development and implementation of rapid prototyping processes for prime contractors supporting US Army DEVCOM AC projects. The primary objective is to address high-priority mission needs by designing agile workflows and prototyping cycles that bridge technical gaps through accelerated research and development. To achieve this, the project requires the use of specialized rapid prototyping facilities and agile development methodologies. The contract deliverables include the creation of comprehensive prototyping frameworks, the production of functional prototypes, and the establishment of streamlined response processes. This effort is categorized under NAICS code 541715, with a response deadline set for March 4, 2031.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541611
Federal
Operational Environment Evaluation & Requirements AnalysisThis subcontract, titled Operational Environment Evaluation & Requirements Analysis, is issued by the Department of Defense under agency W6QK Acc-Pica. The primary objective is to evaluate operational environments for prime contractors on US Army DEVCOM AC projects to identify specific technology transition opportunities. This involves observing and analyzing operational missions, training scenarios, and field situations across military, federal, and civilian sectors, which requires the contractor to be capable of operating within military operational environments. The scope of work culminates in the delivery of detailed operational environment analysis reports and technology gap assessments. Classified under NAICS code 541611, the opportunity was posted on June 2, 2026, with a response deadline set for March 4, 2031.
Administrative Management and General Management Consulting Services

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541330
Federal
Technology Utilization and Integration SupportThe Technology Utilization and Integration Support subcontract, managed by the Department of Defense under W6QK Acc-Pica, focuses on transitioning commercial, academic, and agency technologies into operational capabilities for US Army DEVCOM AC projects. The selected provider will be responsible for identifying transition-ready technologies, assessing maturity levels, and leading multi-disciplinary teams to integrate these technologies into final capabilities. This role requires strong systems engineering capabilities to ensure successful implementation. Key deliverables for this engagement include comprehensive transition plans, detailed integration reports, and the development of functional prototypes. The contract falls under NAICS code 541330 and has a response deadline of March 4, 2031.
Engineering Services

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541715
Federal
Advanced and Innovative Technology Review ServicesThe Advanced and Innovative Technology Review Services subcontract, managed by the Department of Defense under agency W6QK Acc-Pica, focuses on the continuous monitoring and evaluation of advanced technologies for prime contractors supporting US Army DEVCOM AC projects. The scope of work involves analyzing emerging technology trends for government applications and coordinating with academic institutions, government research labs, and various agencies to identify new information sources. Key deliverables include the production of technology review reports, detailed meeting summaries, and curated lists of relevant technologies. This effort falls under NAICS code 541715 and is scheduled with a response deadline of March 4, 2031.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Custom Engineering Analysis SupportThe contract titled Custom Engineering Analysis Support provides on-demand engineering expertise to support DEVCOM-AC teams with complex simulations, model validation, and advanced use cases requiring specialized technical assistance. This subcontract is issued under NAICS code 541330 for scientific and technical consulting services and is administered by W6QK Acc-Pica under the Department of Defense. The work is performance-based at a designated location in Waltham, Massachusetts with a ZIP code of 02451. Services are mobilized as needed to address urgent or intricate technical challenges that exceed standard capabilities, ensuring timely and precise engineering solutions for defense-related modeling and simulation efforts. The contract does not specify a solicitation number or set-aside type, indicating it is likely an unfunded or task-order-based arrangement within an existing overarching agreement.
Engineering Services

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Specialized Engineering Training DeliveryThe contract entails the delivery of specialized instructor-led and virtual training on advanced engineering software modules including ABAQUS/CAE, Composites Modeler, fe-safe, XFlow, and Wave6 to Army engineers. The training is designed to enhance technical proficiency in simulation and analysis tools critical to defense engineering applications, ensuring personnel are equipped to leverage these platforms effectively in mission-critical projects. Instruction must be tailored to meet the technical needs of military engineering teams, emphasizing practical application and real-world problem solving using these industry-standard systems. Performance is required to take place in Waltham, Massachusetts, with a NAICS code of 611430 indicating the work falls under custom computer programming services, specifically within technical training and education. The contract is structured as a subcontract under the Department of Defense’s W6QK Acc-Pica office, with no set-asides specified, indicating open competition among qualified vendors. The solicitation was posted on May 14, 2026, and while no point of contact or specific funding details are provided, the location and software focus suggest a strong alignment with DoD efforts to modernize computational engineering capabilities through targeted technical education initiatives.
Professional and Management Development Training

POSTED

5 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS