Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Major and Complex Bridge Design Engineering

Active

State & Local

Response Deadline08/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks engineering design services for major and complex bridges, with a specific focus on cable-stayed structures, requiring comprehensive structural analysis, load rating evaluations, and complete design documentation. The work is intended to support the Georgia Department of Transportation and falls under NAICS code 541330 for architectural and engineering services, classified as a subcontract opportunity. Proposals must be submitted by August 27, 2026, at 7:00 PM, with the solicitation issued on July 28, 2026. The place of performance and exact office address are not specified in the posted data, but the work is tied to infrastructure projects under the Georgia state transportation authority. There is no set-aside designation indicated, meaning the subcontract is open to all qualified respondents without restriction based on business size or category. Interested parties must access the full solicitation via the provided Georgia state portal to obtain detailed technical specifications and submission requirements.

General Info

Engineering design for cable-stayed bridges for Georgia DOT, due August 27, 2026, open to all qualified bidders.

Agency

Georgia → Department of Transportation-2View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 07:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeorgia → Department of Transportation-2

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Department of Transportation-2

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide engineering design services for major and complex bridges, including cable-stayed structures, with structural analysis, load rating, and design documentation.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 5 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 5 hours ago

DEADLINE

Structural Engineering Design for Marine Davit InstallationThe contract requires comprehensive structural engineering design services for the installation of a Viking Norsafe E-60 Conventional Lifeboat Davit at Pier 7, encompassing all phases from load analysis and foundation evaluation to reinforcement design and final documentation. The engineering deliverables must include stamped drawings and a detailed bill of materials, ensuring compliance with applicable structural and marine safety standards. The scope demands precise analysis of existing pier conditions to confirm structural integrity and determine necessary modifications to safely support the davit system under operational and environmental loads. This is a subcontract opportunity classified under NAICS code 541330 for engineering services, reserved exclusively for small business categories including SBA-certified small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, veteran-owned small businesses, and service-disabled veteran-owned small businesses. The solicitation was posted on August 4, 2026, with a response deadline of August 6, 2026, and is administered by Tongue Point Job Corps, though no physical address or point of contact details are provided. The work is to be performed at Pier 7, with all deliverables subject to approval and alignment with the client’s operational and safety protocols for marine infrastructure.

Tongue Point Job Corps

POSTED

about 10 hours ago

DEADLINE

System Testing, Commissioning, and DocumentationThe contract requires the performance of NFPA 72-compliant testing, commissioning, and detailed documentation for fire alarm and detection systems, ensuring all components meet applicable fire safety standards. A Record of Completion must be submitted as part of the deliverables to certify that all system functions have been properly verified and documented in accordance with regulatory requirements. The work is to be conducted at the Earle C. Clements Job Corps Center, though specific location details are not provided, and the project supports critical life safety infrastructure for the facility. This is a subcontract opportunity reserved exclusively for small business categories under SBA set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code 541330 indicates the work falls under engineering services, and the response deadline is August 10, 2026, with the solicitation posted on August 4, 2026. The opportunity is accessible via the SBA’s online portal for federal contracting opportunities.

Earle C. Clements Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Testing, Adjusting, and Balancing (TAB) ServicesThe contract requires the performance of Testing, Adjusting, and Balancing (TAB) services on existing hot water circulation pumps to ensure they operate in alignment with the system’s design specifications. This work is critical to optimizing heating efficiency, maintaining proper flow rates, and ensuring system reliability across the facility. The task involves comprehensive diagnostic evaluation, calibration, and fine-tuning of the pumps to meet established performance benchmarks, with adjustments made to accommodate the building’s hydraulic and thermal load requirements. The contract is classified as a subcontract under the SBA’s small business set-aside programs, which include eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. It falls under NAICS code 541330 for Engineering Services and is issued by Serrato Corporation DBA Flint Hills Job Corps. Respondents must submit proposals by the deadline of August 13, 2026, though no specific location for performance is provided in the data, and no point of contact details are available. The posting date indicates this opportunity was made public on August 4, 2026, and the solicitation link directs to a federal opportunity portal for further administrative details.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 10 hours ago

DEADLINE

Factory-Certified Boiler Start-Up and CommissioningThe contract requires factory-certified start-up and commissioning of boiler control systems, encompassing circulation pumps, sensors, and reset controls, ensuring full operational compliance with manufacturer standards. All work must be performed by certified technicians authorized by the boiler equipment manufacturer to validate system integrity and performance post-installation. This is a subcontract under a small business set-aside designation, open to SBA-recognized categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541330 categorizes this as professional, scientific, and technical services related to engineering. The solicitation was posted on August 4, 2026, with a response deadline of August 13, 2026, and the performance location is managed by Serrato Corporation DBA Flint Hills Job Corps, though specific site details are not provided.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 10 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California. The project requires professional services such as engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, with a focus on engaging disadvantaged, small, women-owned, minority-owned, and veteran-owned businesses. The solicitation prioritizes participants certified under various set-aside programs including DBE, SBE, WBE, MBE, SDB, WOSB, VOSB, and SDVOSB, aligned with SBA and Department of Transportation guidelines. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 PM PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at charles.brown@ghd.com, and the NAICS code associated with the work is 541330 for architectural and engineering services.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

This contract is a fee-for-service solicitation issued by Management & Training Corporation (MTC) on behalf of the Tongue Point Job Corps Center in Astoria, Oregon, for engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7. The scope of work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials to support the installation, with deliverables including electronic PDF copies and one full-size printed drawing set. The contract is classified under NAICS code 541330 for Engineering Services with a size standard of $9 million and is set aside exclusively for small business, small disadvantaged business, women-owned small business, HUBZone small business, veteran-owned small business, and service-disabled veteran-owned small business concerns. All subcontractors must self-certify their business category, possess a Unique Entity Identifier (UEI), provide a valid Taxpayer Identification Number, and disclose debarment status if their subcontract exceeds $30,000. The contractor must comply with Service Contract Labor Standards, pay at least the federal contractor minimum wage as mandated by Executive Order 13658, and adhere to Wage Determination SCA WD 2015-5577 Rev. 28. The contract includes stringent data protection obligations requiring compliance with DOL and federal data privacy guidelines, including encryption of personally identifiable information, reporting of any breach to the Department of Labor within one hour of discovery, and a prohibition on retaining or disseminating any deliverables containing Privacy Act or FOIA-exempt data. The contractor is required to submit proposals via email to Elizabeth Williamson at Williamson.elizabeth@jobcorps.org by 2:00 PM PST on August 6, 2024, and must include a completed bid sheet, W-9 form, self-certification form, and acceptance of MTC’s terms and conditions. Invoices must be submitted to MTC’s corporate office in Centerville, Utah, and must contain the purchase order number, dates of service, itemized pricing with extended unit rates and totals, and invoice number and date. Payment is conditioned upon delivery and acceptance of services. The contractor must also indemnify MTC against all claims arising from their performance, negligence, or breach of contract, though insurance is not required for this project. Termination is permitted by either party with thirty days’ written notice, or immediately if funding is withdrawn.

Tongue Point Job Corps

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project involves replacing an existing groundwater production well with a new 24-inch diameter stainless steel Ful-Flo louvered well screen, matching existing vertical turbine equipment and integrating discharge piping into the Corydon Blend station and Malaga blending location, in full compliance with AWWA, SWRCB, DWR, and EVMWD standards. Services encompass structural, geotechnical, architectural, noise, survey, corrosion, and potholing engineering, delivered in two distinct phases: Phase 1 focuses on civil site design, technical specifications, line-bid items for drilling and well abandonment, bid assistance, and full-time on-site construction management oversight; Phase 2 covers detailed architectural, mechanical, electrical, instrumentation, and controls design for equipment, testing, and commissioning. The contract requires submission of a detailed cost proposal broken down by task, with total estimated project costs at $2,260,788 including $2 million in construction costs and a negotiable not-to-exceed professional services fee. Proposals must adhere to strict format requirements, including a cover letter, demonstrable project experience, resumes of primary staff and subconsultants, three references, and a comprehensive scope of work. Key attachments include Exhibit B for the Schedule of Services, Exhibit C for compensation rates, and Attachment 2 which mandates completion of certifications for American Iron and Steel compliance, lobbying, debarment/suspension, SAM information, DBE subconsultant disclosures, Executive Order N-6-22, conflict of interest, insurance acknowledgment, and public works registration. All proposers must be certified DBEs and submit comprehensive data on any DBE subconsultants used, including certification numbers and justifications for non-selection. The evaluation process prioritizes relevant qualifications and experience (25%), followed by understanding of the project and technical approach (25%), scope and schedule (20%), innovation (10%), cost and value (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest cost. Mandatory compliance requirements include adherence to the Build America Buy America Act, prohibition of covered telecommunications equipment from Huawei or ZTE, sanctions compliance under Executive Order N-6-22

Ardurra Group, Inc.

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and engineering services during construction to replace an existing water well in Lake Elsinore, Riverside County, California. The contract, identified as C2305, is solicited by AKM Consulting Engineers and is classified under NAICS code 541330 for architectural and engineering services. The project emphasizes the involvement of Disadvantaged Business Enterprises as part of a transportation department set-aside, encouraging participation from underrepresented firms. Key deliverables include comprehensive design work, assistance with the procurement and bidding process, and ongoing engineering oversight throughout construction to ensure compliance, quality control, and timely completion. The official response deadline is September 1, 2026, with primary point of contact being Katie Neubauer of AKM Consulting Engineers, reachable via phone or email for inquiries. All project details and opportunities are accessible through the SBA’s opportunity portal.

AKM Consulting Engineers

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The project is divided into two phases: Phase 1 focuses on the design of the new well and abandonment of the old one according to Riverside County and California State Water Resources Control Board standards, including technical specifications, civil site design, line-bid items, bidding support, and full-time construction management and hydrogeological oversight during drilling; Phase 2 covers the engineering design for well equipping, including architectural, civil, mechanical, structural, electrical, and instrumentation and controls systems for testing and commissioning, with ongoing engineering support during construction. The well casing must be 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing casing depth, with sanitary seal placement compliant with AWWA standards. All work must adhere to Build America, Buy America Act requirements, including documentation of domestic content for iron, steel, and manufactured products, and compliance with federal procurement rules under 2 CFR Part 184. The project is funded in part by a $400,000 Bureau of Reclamation grant, with the remainder covered by non-federal sources, triggering full compliance with Title 2 CFR Part 200, including debarment and suspension rules, lobbying restrictions under the Byrd Act, Clean Air Act and Clean Water Act subrecipient clauses applicable to subcontracts over $150,000, and procurement of recovered materials when purchases exceed $10,000. The Consultant must provide comprehensive services including hydrogeological analysis, borehole geophysics, geotechnical investigation, water quality sampling, environmental permitting with SWRCB coordination, civil and structural engineering, utility coordination, topographic and boundary surveying, construction inspection, QA/QC, and community outreach. All key personnel must be identified with resumes, professional licenses, and certification details, and the firm must demonstrate experience with municipal groundwater projects and public agency collaboration. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental charges, with a not-to-exceed limit anticipated of $1,000,000. The contract requires monthly invoicing with progress reports, adherence to a 45-day payment term, and records retention for four years post-final payment. The Consultant must comply with the EVMWD

GEI Consultants, Inc.

POSTED

about 10 hours ago

DEADLINE

Request for Proposals for Professional Engineering Staff Augmentation Services

Solicitation # RFP 130-13479

Grant County PUD is seeking proposals for Professional Engineering Staff Augmentation Services under RFP 130-13479, an open solicitation with a clarification deadline of August 20, 2026, and a submission deadline of August 27, 2026. The estimated contract value is provided for informational purposes only and may be subject to change. The request is for qualified firms to provide engineering personnel to support ongoing projects, with all proposals to be submitted offline. Bidders must register and log in to access bid-related communications and question-response details. The point of contact for inquiries is Justin Heilman, District Representative, reachable at jheilman@gcpud.org, with additional procurement support available from Nicona Myers at Nbutler@gcpud.org. The contract is targeted toward organizations capable of delivering skilled engineering resources in Washington State, and prequalification may be required. The solicitation was posted on August 3, 2026, and remains open for bidding.

Grant County PUD

POSTED

about 15 hours ago

DEADLINE

More opportunities from Georgia → Department of Transportation-2

Same awarding agency

PNA 484-100226 CEI for ITS

Solicitation # PE-48401-RFQ-2027-000000618

The Georgia Department of Transportation is soliciting proposals for Construction Engineering and Inspection services exclusively for Intelligent Transportation Systems under Contract PNA 484-100226. This solicitation, identified by number PE-48401-RFQ-2027-000000618, was posted on August 3, 2026, with responses due by September 2, 2026, at 7:00 PM. The work will be performed throughout the state of Georgia and involves oversight and engineering support for the implementation of ITS components, which may include traffic sensors, dynamic message signs, signal coordination systems, and other smart infrastructure technologies. The procurement is targeted at qualified firms with demonstrated expertise in transportation systems construction and inspection, and the primary point of contact for inquiries is Rhonda Hightower-Rucker, reachable via email at rhightower-rucker@dot.ga.gov. All submissions must be submitted through the official state procurement portal linked in the solicitation.

Building Inspection Services

POSTED

about 17 hours ago

DEADLINE

Tunnel Engineering and Inspection SupportThe contract titled Tunnel Engineering and Inspection Support seeks specialized services to evaluate the structural integrity, ventilation systems, and emergency access features of tunnel infrastructure under the jurisdiction of the Georgia office of the Department of Transportation. The work will involve detailed engineering assessments and inspections to ensure compliance with safety and operational standards, focusing on long-term durability and emergency preparedness of tunnel structures. Services are expected to include site evaluations, technical analysis, reporting, and recommendations for remediation or enhancements as needed. The solicitation was posted on July 28, 2026, with a firm response deadline of August 27, 2026, at 7:00 PM. This is classified as a subcontract opportunity under NAICS code 541330, which corresponds to Engineering Services. The place of performance is in Georgia, though specific locations are not detailed. There is no set-aside designation specified, and no point of contact information is provided in the posting. Interested parties must submit proposals through the official state portal linked in the notice to be considered for award.

Engineering Services

POSTED

DEADLINE

Geotechnical and Soil Survey StudiesThe contract involves conducting comprehensive geotechnical investigations for bridge and tunnel foundations, including soil boring, foundation analysis, and detailed geotechnical reporting. The work requires field exploration to collect subsurface data, laboratory testing of soil and rock samples, and the development of design recommendations based on the findings to ensure structural integrity and safety. All activities must align with industry standards and regulatory requirements specific to transportation infrastructure projects. This is a subcontract opportunity issued by the Georgia office of the Department of Transportation, with a solicitation posted on July 28, 2026, and a response deadline of August 27, 2026. The North American Industry Classification System code is 541620, indicating it falls under engineering services. The place of performance is within Georgia, though specific locations are not detailed, and interested parties must submit proposals through the official portal linked in the contract data. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors without restriction based on size or ownership status.

Environmental Consulting Services

POSTED

DEADLINE

Land and Engineering Surveying ServicesThe contract solicits land and engineering surveying services to support bridge and roadway projects, requiring comprehensive topographic, boundary, and construction layout surveys. These services must include accurate data collection and integration with GIS and CAD systems to ensure precise project planning, design, and execution. The work is targeted toward infrastructure development under the Georgia Department of Transportation and is classified under NAICS code 541370 for surveying and mapping services. The contract is structured as a subcontract with a response deadline of August 27, 2026, and the solicitation was posted on July 28, 2026. All performance activities are expected to occur within Georgia, though specific locations are not detailed in the posted data. Proposals must demonstrate technical competence in surveying methodologies and digital data integration to meet state transportation project standards.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Hydraulic and Hydrological Studies for BridgesThe contract seeks qualified firms to perform hydraulic and hydrological studies for bridge projects, with a focus on river crossings. Key deliverables include hydrological modeling to assess water flow and volume, floodplain analysis to determine inundation risks, scour evaluation to study erosion around bridge foundations, and comprehensive drainage studies to ensure proper water management. These analyses are critical for the design, safety, and longevity of bridge infrastructure in dynamic aquatic environments. The work must comply with state and federal engineering standards and be tailored to the specific hydrogeological conditions of Georgia’s waterways. The contract is classified as a subcontract under NAICS code 541620, indicating it falls under engineering services. It was posted on July 28, 2026, with a response deadline of August 27, 2026, at 7:00 PM. Performance will take place within Georgia under the oversight of the Georgia Department of Transportation. Although the solicitation number and point of contact details are not provided, interested parties must submit proposals through the official portal linked in the posting. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors without preference for small, minority-owned, or other categorized businesses.

Environmental Consulting Services

POSTED

DEADLINE

Bridge Inspection and Condition AssessmentThe contract requires the performance of on-call bridge inspections, structural evaluations, and detailed condition reporting for bridges, tunnels, and other complex transportation structures under the jurisdiction of the Georgia Department of Transportation. Work must be conducted promptly and reliably to ensure the safety and integrity of the state’s infrastructure, with assessments covering structural components, deterioration patterns, load capacity, and compliance with industry standards. The contractor is expected to deliver accurate, timely condition reports and respond to urgent inspection requests as needed to support maintenance planning and public safety initiatives. This is a subcontract opportunity issued by the Georgia Department of Transportation with a NAICS code of 541330, indicating it falls under architectural, engineering, and related services. The solicitation was posted on July 28, 2026, and responses are due by August 27, 2026, at 7:00 PM. Work will be performed throughout Georgia, with no specific location limitations identified in the data. The contract is not set aside for any particular small business category, and all interested parties must submit proposals through the designated state procurement portal prior to the deadline.

Engineering Services

POSTED

DEADLINE

PNA-484-092826 On-Call Engineering Support Services for Cable Stayed Bridge and Tunnels

Solicitation # PNA 484-092826

The Georgia Department of Transportation is seeking on-call engineering support services for cable stayed bridges and tunnels through a solicitation issued under reference PE-48401-RFQ-2027-000000617. This opportunity, posted on July 28, 2026, invites qualified firms to provide responsive technical expertise on an as-needed basis to support the maintenance, inspection, and evaluation of critical infrastructure assets. The work will be performed throughout the state of Georgia, with no specific city designated, and is intended for use across multiple projects requiring specialized engineering knowledge in cable stayed bridge systems and tunnel structures. Proposals are due by August 27, 2026, at 7:00 PM Eastern Time, and the procurement is classified under a State and Local Government entity type with no set-aside restrictions specified. Primary point of contact for inquiries is Andrea Everson, reachable via email at aeverson@dot.ga.gov or by phone at 404-631-1549. The solicitation is open to eligible contractors seeking to enter into an on-call arrangement that allows the state to activate support services rapidly in response to unforeseen conditions, structural concerns, or scheduled assessments. While no NAICS code is listed, the nature of the work suggests involvement in civil engineering, structural analysis, and transportation infrastructure maintenance. Interested parties can access additional details and submit responses through the official Georgia Department of Administrative Services portal linked in the solicitation documentation.

Engineering Services

POSTED

DEADLINE

in about 2 months

Traffic Engineering and ITS IntegrationThe contract titled Traffic Engineering and ITS Integration requires the development and implementation of comprehensive traffic control plans, signalization systems where needed, dynamic message signs, and full integration with Intelligent Transportation Systems to support express lane operations. The scope encompasses engineering solutions that ensure safe, efficient, and coordinated traffic flow within the express lane network, with emphasis on real-time communication, adaptive signal control, and traveler information delivery through digital signage. All work must align with current transportation standards and operational goals for enhanced mobility and system performance. This is a subcontract opportunity posted by the Georgia Department of Transportation with a NAICS code of 541380, indicating it falls under Other Professional, Scientific, and Technical Services. The request for qualifications is open for responses until August 24, 2026, and the place of performance is within Georgia, though specific city or county details are not provided. All proposals must address technical capabilities, experience with ITS integration, and proven success in delivering similar traffic engineering solutions for high-volume or managed lane environments. Interested parties must submit their responses through the designated state portal by the specified deadline.

Testing Laboratories and Services

POSTED

DEADLINE

Environmental and Permitting Support ServicesThe contract seeks services to provide environmental documentation and permitting support for transportation-related projects, focusing on compliance with regulatory requirements including stormwater and wetlands permitting. The work involves close coordination with federal, state, and local regulatory agencies to ensure all environmental standards are met during the design phase, with an emphasis on facilitating smooth approval processes and minimizing project delays. The contractor will be responsible for preparing and submitting necessary filings, maintaining regulatory correspondence, and ensuring documentation aligns with both state and federal environmental laws. This is a subcontract under NAICS code 541620 for environmental consulting services, issued by the Georgia Department of Transportation with a response deadline of August 24, 2026. The work is expected to be performed in Georgia, though specific location details are not provided. There is no set-aside designation, and the opportunity is open to qualified subcontractors who can demonstrate expertise in environmental compliance and permitting within transportation infrastructure projects. Interested parties must submit responses by the stated deadline through the official portal linked in the solicitation.

Environmental Consulting Services

POSTED

DEADLINE

Surveying and Right-of-Way MappingThe contract entitled Surveying and Right-of-Way Mapping is a subcontract issued by the Georgia office of the Department of Transportation, seeking qualified entities to perform topographic and boundary surveys, prepare right-of-way maps, and provide geospatial data to support infrastructure design development. The work is expected to be performed in Georgia and must align with state transportation planning and engineering standards. The solicitation was posted on July 24, 2026, with a response deadline of August 24, 2026, and falls under NAICS code 541370, which categorizes it as a professional service in surveying and mapping. Bidders must be prepared to deliver accurate, timely, and certified geospatial outputs that facilitate project planning, land acquisition, and construction readiness. While no set-aside designation is specified, interested contractors should ensure compliance with all technical and administrative requirements outlined in the full solicitation available through the provided Georgia state portal link.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Project Management and Consultant CoordinationThe contract titled Project Management and Consultant Coordination requires the contractor to oversee subconsultants, manage the project schedule and budget, and coordinate closely with Georgia Department of Transportation staff to ensure all engineering deliverables are completed on time. The role demands strong organizational and communication skills to align multiple parties, maintain timeline adherence, and control financial resources throughout the project lifecycle. The contractor will be responsible for the end-to-end coordination of technical work, ensuring quality, compliance, and timely submission of all required outputs. This subcontract is solicited under NAICS code 541611 and is open for response until August 24, 2026. The procurement is issued by the Georgia Department of Transportation and does not specify a set-aside category or organizational type requirement. All performance is expected to be carried out within Georgia, though the exact location is not detailed. Interested parties must respond by the stated deadline through the provided online portal, and no point of contact information is listed in the solicitation details.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Independent Quality Assurance / Owner’s Verification Firm (OVF)The contract seeks an Independent Quality Assurance / Owner’s Verification Firm to perform independent reviews and verifications of design documents, construction plans, and contractor submissions to ensure full compliance with contractual obligations and applicable regulatory standards. The firm will serve as a neutral third party tasked with validating the accuracy, completeness, and adherence of all technical and procedural elements throughout the project lifecycle, acting on behalf of the owner to mitigate risk and uphold quality expectations. This role requires deep expertise in engineering and construction standards, as well as the ability to identify discrepancies or noncompliance before they impact project delivery. The opportunity is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Georgia office of the Department of Transportation. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 24, 2026. No specific place of performance or set-aside criteria are indicated, and while contact information is not provided in the data, interested parties must respond through the official portal linked in the solicitation. The nature of the work demands rigorous attention to detail, technical proficiency, and a proven track record in independent verification within public infrastructure projects.

Engineering Services

POSTED

DEADLINE